Hello and sorry for my bad englisch.
I want install RemixOS on my MXQ PRO [NEXBOX], It is Possible?
Stats:
Brand: NEXBOX
Model: MXQ PRO
Type: TV Box
GPU: Mali-450 MP
System: Android 5.1
CPU: Amlogic S905
Core: 2.0GHz,Quad Core
RAM: 1G
ROM: 8G
Where i can finde the ROM and How to Install?
THANKS Guys!!!
Do you find any answer or solutions ?
can you add the remix zip file to a usb stick the choose settings choose update then search
is this how?
Recovery fail update error because my nexbox is model (p201) ..
Hi folks,
I install RemixOS on my NEXBOX MXQ Pro 1GB/8GB from 4pda.ru
(message #3680 August 15, 2016 on MXQ Pro / Plus discussion)
It works fine, LAN, Wi-Fi, Audio, Remote Control are OK
Dogger3 said:
Hi folks,
I install RemixOS on my NEXBOX MXQ Pro 1GB/8GB from 4pda.ru
(message #3680 August 15, 2016 on MXQ Pro / Plus discussion)
It works fine, LAN, Wi-Fi, Audio, Remote Control are OK
Click to expand...
Click to collapse
That's just my Remix OS port for Nexbox A95X with couple of lines changed in build.prop. I actually made some effort to fix wifi/remote/etc and make it into a TWRP flashable zip. No credit given but what can you expect from 4pda...
Apparently MXQ PRO has similar enough hardware as the A95X (rtk8189es wifi mainly) that it works. It still has the Nexbox A95X kernel and all. Just feels so wrong to run something that is really not meant for your device.
KonstaT said:
That's just my Remix port for Nexbox A95X[/URL]
Click to expand...
Click to collapse
Sorry, I did not know this.
Dogger3 said:
Sorry, I did not know this.
Click to expand...
Click to collapse
Not your fault of course. It's good to know it also works on MXQ Pro. You'd deserve a proper port for your device, though.
I have remix OS installed in my MXQ p201..love it...but only ethernet works...no wifi. It lets me "turn on" the wifi but it doesn't scan or show any available networks...any suggestions...im not always able to use ethernet when I take the box to my basement.
Related
Hi, I need help in rooting this tablet (ifive x3), that has this characteristics:
OS: Ifive UI, based on Android 4.2
CPU:Quad Core RK3188 1.6GHz 28NM
Ram:2Gb
Rom:32Gb
Thanks in advance to all.
Easiest way to root this
mauskipper said:
Hi, I need help in rooting this tablet (ifive x3), that has this characteristics:
OS: Ifive UI, based on Android 4.2
CPU:Quad Core RK3188 1.6GHz 28NM
Ram:2Gb
Rom:32Gb
Thanks in advance to all.
Click to expand...
Click to collapse
Is to apply this pre-rooted custom ROM:
http://www.arctablet.com/blog/forum...d-firmware-based-on-v1-1-5-20131211-1/#p35124
The iFive X3 is virtually identical to the iFive X2 (same processor, screen resolution, wireless chipsets), the X3 is slightly larger and is black and has optional 3G connectivity built in.
Pretty much any mod designed for the X2 should work on the X3 with no changes whatsoever.
rooted with TPSparkyRoot.bat
Hi, I've rooted easily my ifive x3 using TPSparkyRoot.bat for Rockchip 3188 http :// blog.geekbuying. com/index.php/2013/03/14/how-to-root-rockchip-rk3188-quad-core-device-like-cube-u30gt-2-pipo-m9/#.UsmJH_RDswo
It install SuperSu in chinese that you can change later.
mauskipper said:
Hi, I've rooted easily my ifive x3 using TPSparkyRoot.bat for Rockchip 3188 http :// blog.geekbuying. com/index.php/2013/03/14/how-to-root-rockchip-rk3188-quad-core-device-like-cube-u30gt-2-pipo-m9/#.UsmJH_RDswo
It install SuperSu in chinese that you can change later.
Click to expand...
Click to collapse
Glad you were able to find a solution. I have an iFive X3 wiki here:
https://www.miniand.com/wiki/iFive+X3
With several guides for the X3
Hi
There's the Tronsmart S95, and now also the Unuiga U1 that supports Remix OS. But does anyone know how updates really will be supported? By Remix? The S905 is quite a lot more powerful than the Alwinner in the Mini so it's quite interesting in that sense, but not knowing about future support...
Waiting for support Odroid-C2
yes even i am interested to know. Will it receive direct updates from Remix (Jide)?
Also any one already reviewed this device Unuiga U1?
If i'm not mistaken, the amlogic s905 is also featured in their new AIO so I believe that there will be official updates from them.
Install Remix on MXQ Pro
Hi, Since it can be downloaded from Jide web page...Does anyone know how to install Remix OS 2.0 in a MXQ Pro (s905), maybe like flashing a ROM?
MXQ Pro (s905) quickplay?
I bought the Vensmile u1 two weeks ago which is the same as Unuiga u1/s905. After updating the OS with the seller`s img file, there`s been one OTA update. So, I suppose it is supported officially.
This there a nougat development for our device? I hope there is as the new doze implementation will benefit low end devices like our Redmi 1s.
Thanks..
Not possible.
Redmi 1S most probably won't get Android 7.0 because of CPU & GPU restrictions. It will only support the following devices as mentioned in the article by Android Authority.
""Looking over the list of devices that will receive Nougat we find the following:
1) The devices cover a range of GPUs including Adreno 306, Adreno 430 and Mali-T860.
2) The devices have a broad performance range from the Helio P10 and the Snapdragon 410 right through to the Snapdragon 820.
3) Most of the devices have 64-bit processors.""
http://www.androidauthority.com/android-7-0-snapdragon-800-801-712930/
ravish_919 said:
Redmi 1S most probably won't get Android 7.0 because of CPU & GPU restrictions. It will only support the following devices as mentioned in the article by Android Authority.
""Looking over the list of devices that will receive Nougat we find the following:
1) The devices cover a range of GPUs including Adreno 306, Adreno 430 and Mali-T860.
2) The devices have a broad performance range from the Helio P10 and the Snapdragon 410 right through to the Snapdragon 820.
3) Most of the devices have 64-bit processors.""
http://www.androidauthority.com/android-7-0-snapdragon-800-801-712930/
Click to expand...
Click to collapse
But one plus one n nexus 5 got nougat despite being snapdragon 800,801 and adreno 330 so there is possibility of redmi 1s recieve nougat n it is not mandatory in nougat to implement vulkan api
gamefreaksuraj said:
But one plus one n nexus 5 got nougat despite being snapdragon 800,801 and adreno 330 so there is possibility of redmi 1s recieve nougat n it is not mandatory in nougat to implement vulkan api
Click to expand...
Click to collapse
I have the same feeling about this.
ravish_919 said:
Redmi 1S most probably won't get Android 7.0 because of CPU & GPU restrictions. It will only support the following devices as mentioned in the article by Android Authority.
""Looking over the list of devices that will receive Nougat we find the following:
1) The devices cover a range of GPUs including Adreno 306, Adreno 430 and Mali-T860.
2) The devices have a broad performance range from the Helio P10 and the Snapdragon 410 right through to the Snapdragon 820.
3) Most of the devices have 64-bit processors.""
http://www.androidauthority.com/android-7-0-snapdragon-800-801-712930/
Click to expand...
Click to collapse
i think redmi 1s will get 7.0 with some limitations like no individual file-encryption system as it requires a high speed storage
and OpenGL
gamefreaksuraj said:
But one plus one n nexus 5 got nougat despite being snapdragon 800,801 and adreno 330 so there is possibility of redmi 1s recieve nougat n it is not mandatory in nougat to implement vulkan api
Click to expand...
Click to collapse
But don't you think having the Vulcan API would be a lot better?
ravish_919 said:
But don't you think having the Vulcan API would be a lot better?
Click to expand...
Click to collapse
How can it better? Snapdragon 400 doesn't support vulcan.
I think we better wait for cm 14 and armani-dev to work once it released
ravish_919 said:
But don't you think having the Vulcan API would be a lot better?
Click to expand...
Click to collapse
Vulkan api is for gaming basically but redmi is not suitable for gaming
gamefreaksuraj said:
Vulkan api is for gaming basically but redmi is not suitable for gaming
Click to expand...
Click to collapse
That's right too! But is faster installation of apps based on storage or the Vulkan API?
Sent from my HM 1SW using Tapatalk
ravish_919 said:
That's right too! But is faster installation of apps based on storage or the Vulkan API?
Click to expand...
Click to collapse
No, Vulkan is basically something like OpenGL, it's a premade library that helps take the load off the GPU, but only if the game creators used stuff from that library.
hope so
AndroidOne devices received unofficial CM14. http://forum.xda-developers.com/cro...velopment/rom-cyanogenmod-14-alpha-1-t3454714
Redmi 1s can receive
Nexus 4 has it
ravish_919 said:
Redmi 1S most probably won't get Android 7.0 because of CPU & GPU restrictions. It will only support the following devices as mentioned in the article by Android Authority.
""Looking over the list of devices that will receive Nougat we find the following:
1) The devices cover a range of GPUs including Adreno 306, Adreno 430 and Mali-T860.
2) The devices have a broad performance range from the Helio P10 and the Snapdragon 410 right through to the Snapdragon 820.
3) Most of the devices have 64-bit processors.""
http://www.androidauthority.com/android-7-0-snapdragon-800-801-712930/
Click to expand...
Click to collapse
Dude Nexus 4 is very similar to ours we might port it, im working on it...
geekyandroidtipsrocks said:
Dude Nexus 4 is very similar to ours we might port it, im working on it...
Click to expand...
Click to collapse
Moto G 2013 "falcon" is the same, tried hit 'n' trail but stuck with bootloop :silly:
simuhnck said:
Moto G 2013 "falcon" is the same, tried hit 'n' trail but stuck with bootloop :silly:
Click to expand...
Click to collapse
did you try with cm13 boot.img or not?
hemantbeast said:
did you try with cm13 boot.img or not?
Click to expand...
Click to collapse
tried with MoKee, will it work with CM13
simuhnck said:
tried with MoKee, will it work with CM13
Click to expand...
Click to collapse
You have to try cm13 boot.img because the version released is cm14 for falcon not the Mokee7.0 for falcon. So try with cm13 boot.img and report if it boot's or not!
hemantbeast said:
You have to try cm13 boot.img because the version released is cm14 for falcon not the Mokee7.0 for falcon. So try with cm13 boot.img and report if it boot's or not!
Click to expand...
Click to collapse
Will try and other change to made...
geekyandroidtipsrocks said:
Dude Nexus 4 is very similar to ours we might port it, im working on it...
Click to expand...
Click to collapse
hemantbeast said:
You have to try cm13 boot.img because the version released is cm14 for falcon not the Mokee7.0 for falcon. So try with cm13 boot.img and report if it boot's or not!
Click to expand...
Click to collapse
This is the indication that possible to have a Android 7 in Redmi 1s.
I really excited about it.
Keep up the good work devs. If you need a tester, I willing to do so.
vhick said:
This is the indication that possible to have a Android 7 in Redmi 1s.
I really excited about it.
Keep up the good work devs. If you need a tester, I willing to do so.
Click to expand...
Click to collapse
I'm working on cm14 for Redmi 1s. But I'm getting some compilation error's, I need someone's help to solve such errors, as I'm noob in compiling ROM.
I have a PB68WRJP Xtrons with 6.2" (800x480 resolution) screen that, as confirmed by Xtrons, has the Split Screen functionality disabled. They says that this function is available only for the 7" screen units and up (I don't know why).
I suspect that the functionality is disabled in the build.prop file since, even enabling the Developer Options, it doesn't work.
I saw that the available ROMs from Xtrons are of 2 types (as provided by Xtrons):
- PB Series (mine)
- PE Series
In the ROM there isn't any indication on the specific Model and relevant screen size. The only difference is on the main zip file name:
- PE : GS-PE 系列 Android 8.0 .谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)
Inside the PE file there is the following directory:
"GS-PE 系列 Android 8.0 2+32G谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)"
(Translated "GS-PE series Android 8.0 2+32G Google background update and mobile internet version updated to 5.09gs5_PX5_8.0_ upgrade package (20180504)")
Inside there are this 2 files:
- dmcu.img: Size: 221 KB (MCU)
- update.zip: Size 1018599 KB (ROM)
- PB : GS-PB 系列 Android 8.0 .谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)
Inside the PB file there is the following directory:
"GS-PE 系列 Android 8.0 2+32G谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)"
(Translated "GS-PE Series Android 8.0 2+32G Google background update and mobile internet version updated to 5.09gs5_PX5_8.0_ upgrade package (20180504)")
Inside there are this 2 files:
- dmcu.img: Size: 221 KB (MCU)
- update.zip: Size 1018599 KB (ROM)
As you can see, all the files are identical, including the one that are inside the "update.zip" above.
My idea is to install a PE Series ROM on my PB in order to see if I will have the functionality enabled, but I don't know if the different screen resolutions (1025x600) could case problems or brick the unit.
Anyone could help me ?
Thanks
royalhawk2002 said:
I have a PB68WRJP Xtrons with 6.2" (800x480 resolution) screen that, as confirmed by Xtrons, has the Split Screen functionality disabled. They says that this function is available only for the 7" screen units and up (I don't know why).
I suspect that the functionality is disabled in the build.prop file since, even enabling the Developer Options, it doesn't work.
I saw that the available ROMs from Xtrons are of 2 types (as provided by Xtrons):
- PB Series (mine)
- PE Series
In the ROM there isn't any indication on the specific Model and relevant screen size. The only difference is on the main zip file name:
- PE : GS-PE 系列 Android 8.0 .谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)
Inside the PE file there is the following directory:
"GS-PE 系列 Android 8.0 2+32G谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)"
(Translated "GS-PE series Android 8.0 2+32G Google background update and mobile internet version updated to 5.09gs5_PX5_8.0_ upgrade package (20180504)")
Inside there are this 2 files:
- dmcu.img: Size: 221 KB (MCU)
- update.zip: Size 1018599 KB (ROM)
- PB : GS-PB 系列 Android 8.0 .谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)
Inside the PB file there is the following directory:
"GS-PE 系列 Android 8.0 2+32G谷歌后台更新和手机互联版本更新到5.09gs5_PX5_8.0_升级包(20180504)"
(Translated "GS-PE Series Android 8.0 2+32G Google background update and mobile internet version updated to 5.09gs5_PX5_8.0_ upgrade package (20180504)")
Inside there are this 2 files:
- dmcu.img: Size: 221 KB (MCU)
- update.zip: Size 1018599 KB (ROM)
As you can see, all the files are identical, including the one that are inside the "update.zip" above.
My idea is to install a PE Series ROM on my PB in order to see if I will have the functionality enabled, but I don't know if the different screen resolutions (1025x600) could case problems or brick the unit.
Anyone could help me ?
Thanks
Click to expand...
Click to collapse
PB series are the android 8 based px5 units and PE the previous android 6 based px5 units.
So dont worry about the resolution you are safe to install the version you have
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
PB series are the android 8 based px5 units and PE the previous android 6 based px5 units.
So dont worry about the resolution you are safe to install the version you have
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
If I understood well, the PE are the previous Android 6 unit updated to Android 8 from Xtrons ?
Then, were is the "resolution" written in the ROM ?
Thanks
royalhawk2002 said:
My idea is to install a PE Series ROM on my PB in order to see if I will have the functionality enabled, but I don't know if the different screen resolutions (1025x600) could case problems or brick the unit.
Anyone could help me ?
Click to expand...
Click to collapse
no problem, the universal implementation of the MTCD/E platform allows you to programmatically change the screen resolution from 800x480 to 1024x600 and back through different parameters set in the dmcu.ext file
Hello, I would like to install a rom in my LG K40s (LM-X430EMW) with Android 9. The problem is that if I check if my device is compatible with Treble or not in Treble Info it says that is compatible and is ARM32 but uses 64bit binder, in the other hand If I check my device compatibility in Treble Check it says that is compatible and uses a CPU with 32 bit ARM. So my question is: What version from here (https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/) should I install on my device? I hope you can help me, I attached some screenshots if you need more information. Thank you very much.
use a64 ab
Hsnmastoor said:
use a64 ab
Click to expand...
Click to collapse
Ok, Thank you very much!
doofus999 said:
Ok, Thank you very much!
Click to expand...
Click to collapse
Your welcome
my man you cant install lineage os because LG k40s has its bootloader locked and fastboot mode hidden