I flashed Viper, now in the initial setup I am presented with this message:
"This device was reset. To continue, sign in with a Google Account that was previously synced on this device."
I enter my credentials, and it brings me back to the same prompt. It is in an endless loop and I can't get into my device. What do I do now?
Edit: Tried using the "Forgot password" link using the HTC 10, reset a new password, still having same issue.
Edit 2: I reset my Google account password last night. Today I flashed Viper, which is equivalent to a device reset. I just read this: "The moment your Google account password is changed, Device Protection starts a 72-hour timer on your protected device. For that 72 hours, if the device is wiped, the account in question cannot be used to sign into / unlock the phone." So am I on this 3-day lockout? Did the timer restart when I reset my password again today trying to get into the device? Really pissed right now.
If your bootloader is locked and you're S-ON then I don't think you have any recourse besides waiting the 3 days.
If you're unlocked / S-OFF then you should be able to wipe/format in TWRP, reinstall ViperROM and be good to go, but I've never run into this situation personally so I can't be sure.
The 72hr lock begins whenever you change your password so don't change it again.
drumz0rz said:
If your bootloader is locked and you're S-ON then I don't think you have any recourse besides waiting the 3 days.
If you're unlocked / S-OFF then you should be able to wipe/format in TWRP, reinstall ViperROM and be good to go, but I've never run into this situation personally so I can't be sure.
The 72hr lock begins whenever you change your password so don't change it again.
Click to expand...
Click to collapse
Thanks for the reply! From everything I've read, there's no way to clear out whatever identifying information is in the phone that ties it to a Google account. I'm unlocked and S-OFF, so I'll give it a shot if I get time tonight. Anyone else had any experience with this?
Flash RUU to get back to stock if one is available for your device.
yldlj said:
Flash RUU to get back to stock if one is available for your device.
Click to expand...
Click to collapse
Flashed stock RUU, was able to get back into device using my Google account. I think I might have done something wrong when flashing RUU, though, I'm getting lots of FCs. Anyway, I unlinked my Google account from the phone, should I be OK to go back to Viper now?
All is well after flashing stock RUU, removing Google account from the phone, reflashing TWRP and Viper. Thanks!
Glad you're back in business. Make sure you do a full wipe before flashing a RUU, that should clear out anything from the previous install. I think Viper's Aroma installer does it for you which could be why you don't have the same FC issues now. Just FYI.
Related
Three days in with a replacement Pixel C, it has stopped recognising my lockscreen pattern. I know it is correct as I use the same pattern on my phone. Wiping the cache has no effect.
I can't use Android Device Manager to set a new password as it detects that the lock screen is already active.
Is there any option other than a factory reset?
PriyanPhoenix said:
Three days in with a replacement Pixel C, it has stopped recognising my lockscreen pattern. I know it is correct as I use the same pattern on my phone. Wiping the cache has no effect.
I can't use Android Device Manager to set a new password as it detects that the lock screen is already active.
Is there any option other than a factory reset?
Click to expand...
Click to collapse
In this case, even a factory reset might not help.
Just to confirm, should anyone else have the same issue, a factory reset did solve the problem and the error has not returned. Still no idea what could have caused it though.
Solution
I had this problem also just hold the power button down for like a minute.
I'm having the same problem, was working fine a few hours ago then not recognizing the pattern. I've tried holding the power button but that just powers it off. When I turn it back on it asks for my pattern to power the device back on and it recognizes the pattern then just fine but once it power's up and I try to put the same pattern in to unlock the screen it says wrong pattern!! What the hell is going on here? Any help please?
This happened to me and Google RMA'd the unit. I had to factory reset it, but if you want to retain the data on it I strongly recommend installing something along the lines of Airdroid so that you can access the file hierarchy remotely even if the device is locked.
Airdroid has its benefits in other areas, however I found it a lifesaver for that one incident which allowed me to pull my files prior to the factory reset.
NJ72 said:
This happened to me and Google RMA'd the unit. I had to factory reset it, but if you want to retain the data on it I strongly recommend installing something along the lines of Airdroid so that you can access the file hierarchy remotely even if the device is locked.
Airdroid has its benefits in other areas, however I found it a lifesaver for that one incident which allowed me to pull my files prior to the factory reset.
Click to expand...
Click to collapse
Thanks I'll have to check into that app. I already did a factory reset this time and it worked but I'm just curious what caused it and if I should just not use a screen lock on it anymore? So when you say you RMA'd the unit you mean Google swapped the unit out for another one? Or they recommended you to do a factory reset? Thanks again for the advice.
1barlog17 said:
Thanks I'll have to check into that app. I already did a factory reset this time and it worked but I'm just curious what caused it and if I should just not use a screen lock on it anymore? So when you say you RMA'd the unit you mean Google swapped the unit out for another one? Or they recommended you to do a factory reset? Thanks again for the advice.
Click to expand...
Click to collapse
Yes, Google sent me a new unit. They didn't advise to do a factory reset, they just advised to return the unit. Part of their RMA process is that they recommend you wipe data (for data protection) so I ended up doing both.
I imagine that there are other apps which would offer access to your device data without unlocking, I just have experience with Airdroid.
I also had this problem, but I was using a pin instead of a pattern. Very concerning to be locked out of your own tablet. Had the tablet for about 3 months before it happened. Factory reset fixed it, hasn't returned since but only time will tell. Doesn't inspire a lot of confidence in the device knowing that maybe you could get locked out at any moment.
The same problem has been found on the Nexus 6p. Lockscreen not unlocking with the correct pin/password, appears to be a problem with the lockscreen as the phone can be booted or decrypted with the correct password.
The suggested fix was to ensure you have prey or another similar program installed. Changing your unlock password remotly via prey fixes the problem allowing you access to your phone.
Just had this problem today. Went to login with the same pattern I've been using for the past 3+ months, and it said "Wrong Pattern" over & over again. I tried to reboot and try again, same story. I used Android Device Manager to lock it & entered a password. Then my Pixel C confirmed that it was locked via the Android Device Manager, but when I went to log in, it asked me for a pattern, not a password! (Bad sign!) And, of course, I entered the right pattern and it told me it was the wrong pattern.
The Google support rep said I had to do a factory data reset. It is indeed disconcerting and frustrating. Next time I'll use Backup!
are you guys rooted? I had this problem on my N5X during rooting and trying to install ROMs. wiping data helped but I simply reset the device anyway. I noticed this also happened on some devices when an incompatible version of SuperSU was installed. If not rooted then you got me.
I am not rooted. I haven't done anything to the tablet except install & use apps and install a p12 certificate (which, I believe, unfortunately, requires you to use some kind of lock screen).
So, I used Android Device Manager to erase my tablet & the problem went away. Yay! I changed to using a PIN instead of a pattern. Now, today, just over a week later, the problem has recurred. <sob!> It says "Wrong PIN" when I try to login, even after powering off & on again, and I am facing the prospect of having to go through all that again.
Just had the same issue, tablet not rooted no developer options unlocked/used just left as factory with apps installed from play store.
Factory reset in progress...
Just happened to me (on the official beta ROM)
This just happened to me today on my Pixel C. I found threads on Google Forums that this has been happening for over a year without a fix.
If your bootloader is unlocked, you can always boot TWRP, Advanced > File Explorer, change to /data/system and delete locksettings.db, locksettings.db-wal and locksettings.db-shm.
Does anybody has an idea here? I'm confronted with this issue: Wrong PIN. No matter how many times i give the correct PIN
restarting Pixel C does not help. Is there any other way to fix this issue?
Shame on Google for this!
farsiray said:
Shame on Google for this!
Click to expand...
Click to collapse
Actually: did Google forget your PIN? As far as I am concerned: Google still knows your PIN. It's you that doesn't.
bornheim2 said:
Actually: did Google forget your PIN? As far as I am concerned: Google still knows your PIN. It's you that doesn't.
Click to expand...
Click to collapse
Looks you have no clue what you're talking about. Do some more reading before you give a useless comment.
This is an issue with Pixel C since 2016, Google still hasn't fixed it.
https://issuetracker.google.com/issues/62404336
https://productforums.google.com/fo...ce=footer#!msg/nexus/ImQsmQ8-8JA/n-1kqOv9AwAJ
So my Swift was struggling to run and kept rebooting on me- I downloaded an app for pokemon go I probably should not have. What i decided after a week of frustration, was to do a factory reset of the phone. But now my phone wont let me finish the install- it lets me get as far as setting up a Cyanogen account, but whatever I do it tells me there is a 'communication error' with the server, suggests changing the WiFi connection and check my SIM us properly installed. It will not let me go past that screen. Ive tried rebooting in recovery, setting up a new cyanogen account and popping in an old sim. nothing but the same message.
I never did anything fancy with the phone. It has been running the stock ROM and was up to date with the software. Im out of ideas, and am looking for any other suggestions.
Anything at all would be awesome. I dont know what information I can give that might help you, but if you need something ask.
Thanks
First thoughts would be that cyanogen are history so setting up a cyanogen account sounds potentially problematic.
Are you not able to skip the account setup? I can't remember.
What version COS is installed?
M.A.K said:
First thoughts would be that cyanogen are history so setting up a cyanogen account sounds potentially problematic.
Are you not able to skip the account setup? I can't remember.
What version COS is installed?
Click to expand...
Click to collapse
Ya... That would explain some things. So now i cant even log into my old account?
Nope.... it does not give me that option.
And when check in fastboot mode, it says the LK version is : Crackling-13-ge86e772.
And both the OEM unlocked and security fuse is set to false.
As it's unlocked, you at least have the option of installing another rom. And we'll have a new rom coming from wileyfox soon, too.
So if i download a compatible rom and install that, it should be okay? Considering my device is unrooted, I didnt think that was an option. Sorry about this...
Yes. As you've already done a factory reset you don't have to worry about your data being compatible.
It may be worth trying to flash the latest COS first just in case something has somehow been corrupted. But failing that, install TWRP and try LineageOS or crDroid.
awesome!! I will give that a go. Thanks so much
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
StATicxTW0T said:
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
Click to expand...
Click to collapse
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
allstar21369 said:
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
Click to expand...
Click to collapse
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I have a rooted XT1710-01, also. If you are going to install Xposed and Gravity Box, I recommend not updating Magisk, above v14. After v15 and now v16, I have had issues with Automate It app and Tasker rules not working, until I uninstalled Xposed.
Downgrading Magisk versions requires flashing your stock ROM and basically starting over.
Motorola has not posted firmware for this model.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
So glad to see someone have it working and with a clear guide. I'm going to buy the phone this week.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Johmama said:
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Click to expand...
Click to collapse
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
allstar21369 said:
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
Click to expand...
Click to collapse
I didn't flash TWRP on my phone. I think I tried it once and it failed for some reason, so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup. Flashing it is up to you, I've always flashed a custom recovery but on this phone I'm keeping the original recovery so I can get an OTA. On my Nexus devices I don't care about OTA because I just flash ROMs all the time so it's no big deal.
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked. As far as turning off encryption, I'm not sure if there's a way to do that. There could be, but to turn it off, it wipes your data as a security measure.
Johmama said:
so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup.
Click to expand...
Click to collapse
Yeah, I can't backup my ROM most likely because I don't have an FBE password. When I go to backup my ROM in TWRP it fails.
Johmama said:
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked.
Click to expand...
Click to collapse
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
allstar21369 said:
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
Click to expand...
Click to collapse
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Johmama said:
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Click to expand...
Click to collapse
Okay. I just wiped and re-set up everything and still no FBE password was asked for OR works when I go into TWRP. I'm using TWRP 3.1.1-0... I suppose I'll try it all again using TWRP 3.2.1-0-albus after deleting data.
*Edit: I did exactly what I just said I was doing booted TWRP 3.2.1-0-albus instead of 3.1.1-0 and when I it booted up and asked me for a decryption password I entered the pin I set up previously and it has been stuck at the "Mount, Trying Decryption" screen for a long time... but it's not frozen. It says "Updating partition details... ...done
Unable to mount storage
Full SELinux support is present.
Data successfully decrypted, new block device: '/dev
/block/dm-0'
Updating partition details...
...done"
And the progress bar/thing at the bottom is still animated like it's working... no forward or back buttons or anything and turning off/on the screen hasn't done anything... not really sure what to do here... I don't want to unplug it and brick my phone or force it off...
*Edit 2:
I now have it all sorted out.
TWRP never finished trying to decrypt data so I long pressed the power button and eventually went here -> https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531 , downloaded "twrp_albus_3.1.2_r18_64.img" and in adb used the command:
fastboot boot twrp_albus_3.1.2_r18_64.img
This TWRP looks a bit different than all of the others but it let me boot up and use my recently created PIN code to actually decrypt my data and make a full backup. After that I just installed Magisk (the latest one, 16.4) as indicated in this guide -> https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792 and everything is fine. I never even flashed TWRP, just booted it.
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
joefuf said:
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
Click to expand...
Click to collapse
I didn't want updates, especially the oreo "upgrade".
pizza_pablo said:
I didn't want updates, especially the oreo "upgrade".
Click to expand...
Click to collapse
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
joefuf said:
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
Click to expand...
Click to collapse
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Double - double \_0_/
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
Yeah, very understandable. It really is superfluous to the general experience.
allstar21369 said:
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
Click to expand...
Click to collapse
Thank you sir! Keep me posted. I'm posting everywhere right now to learn the new methods so I know if there ever comes a time. This is my first phone since my Motorola Droid 4. Back then it was one click root, install and run Safestrap apk to get custom recovery, boot into custom recovery and flash zips to your heart's content. I'm sure this will be as "simple" once I learn, but it's pretty daunting in prospect.
Hello all,
I had a nightly build of Nougat RR on my Zuk Z2 and it was giving me problems. I decided to go to AOSP Extended Oreo. I had a really long randomly generated password for my Google account, and I also had 2FA. I changed the password to something I can easily type and disabled 2FA. I didn't realize this was a no-no and would trigger FRP.
I flashed TWRP 3.2.1 (for Oreo support) and flashed 1.7 Baseband Modem with ADB.
I booted into TWRP and wiped everything. I had backed up the important files; I wanted to start from scratch. I pushed the AEX ROM and GApps using ADB and flashed it using TWRP.
The first bootup took a while, which was expected. It began the initial setup; and told me: "This device was reset to continue, sign in with a Google account previously synced on this device". So I signed in, but it kicked me back out saying "Please sign in using one of the owners accounts for this device." But that is the account that was on the device!
I did a bit of googling, and discovered if I reset the password it would trigger a 24 (or 72) hour lockout for theft prevention. I waited over 72hours and it is giving me the same error, no luck.
On my Google devices page, it tells me an Android phone was last synced.
The phone seems to work beautifully, but I can't get in! Can someone please help?
Many thanks,
Don't flash gapps yet
raz0rev said:
Don't flash gapps yet
Click to expand...
Click to collapse
Thank you for the response! So I should do another wipe using TWRP and only flash AEX? That should let me through? Then when do I flash gapps? I'll give that a shot tonight. I really don't wanna buy a new phone, the Z2 is still so nice.
You Solved?
I'm in the same situation and don't know how to solve it!
paolomatador said:
You Solved?
I'm in the same situation and don't know how to solve it!
Click to expand...
Click to collapse
Flash only ROM then reboot device, once boot up use it for a while then reboot to recovery flash gapps reboot.
Hope it helps
Yes, I did it and it solved. Great!!
Thanks
.
rodagola said:
Hello everyone on xda, please bare with me. Here's my story
I own a Redmi Note 8 pro, chinese rom model. It was running miui 11.0.3 over android 9 If I recall correctly.
Ok so... I was tired of some of the china apps pushing their notifications over and over and auto installing stuff, so I looked up how to apply adb commands to remove such bloatware, which was a fairly simple process. I copied and pasted a list of safe stuff to delete I found around some forums.
then... there were some other packages I checked out using an app called "app inspector", which directly tells you which app is under which package (totally useful for this purpose).
I tried to be careful not go overboard since I don't have any root access, or custom recovery, and wasn't really planning to have these, just wanted to keep this as my simple daily driver cellphone, but also perform this little maneuver to get rid of some bloatware.
little did I know, I was about to somehow softbrick it. More info: I did not use a screen lock method other than the "swipe up".
Ok, so I uninstalled some packages I cannot remember exactly how they went, but they had the terms "xman" and "yman" on them I think, I wasn't so sure about them because I looked them up on the web yet they didn't appear anywhere. I think they went something among the lines of "com.android.miui.xman". I also uninstalled 2 or 3 more, but after googling, they seemed unsuspecting.
Anyways, I'm aware there's a command to reinstall the packages because they're still on the phone's ROM image. That is in case I had to restore anything back to normal. Turns out I later rebooted the phone and when it launches the lock screen, I keep swiping up but it won't take me over to the actual MIUI launcher. The screen is frozen on the lock screen.
I'm not freaking out at this time because I still tried to connect the device to the pc, and it still shows as connected, I then go to the adb console and type "adb devices", it is still recognized, however, it says next to it that it is unauthorized... damn it. So now I might not be able to run the commands that allow me to reinstall the exact packages that are rendering the phone softbricked (I guess), plus I'm not really sure which package caused this.
After about a minute or two on the lock screen, the phone takes me to the "redmi-recovery 3.0",
which displays 3 options:
Reboot to system: which basically forms a loop
Wipe date: godforbid... really don't want to do it since I likely had many files not backedup
Contact miassistant: not sure what to do with this, says "pcsuite.mi.com" at the bottom
on the miassistant option you can apparently sideload stuff, idk how to go about this, maybe it allows me to install a slightly upgraded ROM, which in turn will work the same as if it was an OTA update (so it will keep my data as it was instead of wipe)? Because the point is not to erase my user data!!
I'm not sure how to feel or what to do without losing my pictures, notes and documents
I have hopes this situation can be turned around back to normal, and like the title implies... I'm WILLING to PAY you through paypal or something to WHOEVER offers to guide me through in the best way possible. Please if you have the knowledge/experience don't hesitate I'll also be grateful timelessly.
I'm not an expert at these scenarios so I might as well ask on xda where most are really skilled! Thanks in advance to those amazing souls
Click to expand...
Click to collapse
tldr;
If you can boot into fastboot mode you can just flash a official MIUI fastboot ROM:
Xiaomi Firmware Updater (where you can download official MIUI ROMS): https://xiaomifirmwareupdater.com/
This is the current hard unbrick method: https://telegra.ph/Installing-Redmi-Note-8-Pro-firmware-via-SP-Flash-Tool-01-21
It should also work in your case and there's even a video guide.
This is another video guide for fixing a hard brick:
Both methods above will format your phone though (afaik all data will be lost).
Compass.
.
rodagola said:
are these the kind of roms that you unzip and have the BL, AP, CP, CSC files? I could try that, but I've heard installing home_csc will not override/wipe my personal data. If this is what you meant, can you confirm? Or do you reckon these linked video tutorials would not wipe the data?
Click to expand...
Click to collapse
Nope, it doesn't.
If you can boot into Fastboot, flash the ROM using Mi Flash, otherwise, use this tutorial:
.
Compass Linux and juliusjr have told you the method, so I will just add supplemential infos.
In your case, I think simple upgrade will do the trick, dirty flash is applicable both via fastboot flash (mi flash) and recovery flash (the mi assistant method). If you want to stop the ads, I will recommend you to unlock your bootloader, move to global, root, and use an adblocker (a bare minimum config, in trade of some bangking apps being blocked).
I don't know the corresponding version for miui china rom, but in global rom, prior 12.0.0.7 (the one with the early 2021 security update), you can dirty flash back and forth while keeping your data.
.
rodagola said:
Hi, thanks for your info, I would like to try the mi flash tool as I've been told before the stock recovery thing has less chances of working. However, I had dev options turned on before but didn't manage to turn on the "OEM unlock" option, will flashing original ROMs work this way? or did I need that option toogled on? That's my last doubt, and thanks a lot. Btw, the China ROM this Redmi N8P had never ever showed me any ads, but thanks a lot as well for such input
Click to expand...
Click to collapse
You still have a locked bootloader? (How do I know? You will see "Unloked" on the bottom of the screen everytime your device reboots and showing mi logo if your device is unlocked)
Hmm, mechanically it work like normal ota update. Full recovery update will ony erase nessesary partitions (system, boot, and some other things) while keeping your data intact. So doing this to your phone technically safe. You can do this with MiFlashPro, do a recovery update using a recovery rom (the 2 gigs one) greater than your current MIUI version. But please bear in mind that I have never done this before to a locked phone. A same distribution version IS A MUST (i.e. global with global).
Oh and it will need you to log in to your xiaomi account. My guess is you need the flash permission open for your account (if you have unlocked your phone you shouldn't have a problem). I have never flashed with an account that never have been used to unlock a bootloader, so I might be wrong.
If your phone is bootloader unlocked, Mi Flash is the least demanding and it can retain your data with "save user data" in the bottom right corner option on, regardless your miui version (but I think there will be some problem with installed apps if you downgrade from A10 to A9).
Hope this help.