Related
I wanted to post here since this is the "Apps" category for Fire TV...
By following the XBMC wiki for FIre TV, I got XBMC running in just 3 minutes.
> Wiki info page- http://wiki.xbmc.org/index.php?title=Amazon_Fire_TV
My SMB share was discoverable and my library was populated just a few minutes later.
I've verified good video and audio playback on SD, 720p, 1080p videos. Scanning and skipping works well in video playback too.
The only thing I continue to stumble with is that pressing the "Home" button returns you to the Fire TV homescreen, backgrounding XBMC.
I haven't yet found a way to create a homescreen or "Recents" shortcut for XBMC, so it's a chore to open it every time by navitgating to Settings > Applications...
If anyone knows how to get the PleXBMC add-on working within XBMC, I'd love to know how. I tried it and get a script load error every time I try to launch the add-on.
Other than that, do you know have any other add-on recommendations to make XBMC even better for the Fire TV?
archa1c said:
I wanted to post here since this is the "Apps" category for Fire TV...
Click to expand...
Click to collapse
good, thank you! with hope, people will write about xbmc/spmc in this thread, instead of random other threads, or, even worse, that unholy "amazon fire tv" proto-thread that refuses to die.
archa1c said:
I've verified good video and audio playback on SD, 720p, 1080p videos. Scanning and skipping works well in video playback too.
Click to expand...
Click to collapse
I prefer gotham, it was great on ouya. but on firetv I had to switch to spmc (12.4.2 as of koying's latest recommendation).
even the "master" and "amazonfiretv" nightlies and test-builds of gotham, give me a headache - it's weird and I can't describe it too well - pulling up the info overlay by pressing 'o' on the keyboard, I see that there are zero skipped frames and zero dropped frames. but ?something? is still screwy with motion blur - no artifacts or anything. but there is this jerkiness, or something, that hurts my eyes and the lasagna in my brainpan...?
my only complaint of spmc is that it breaks most of the 360 controller (a "ok/enter" and b "cancel/back" still work, but not the sticks or dpad). I still can't figure out how - neither xbmc nor spmc come with any keymap files, not under system/keymaps and not under userdata/keymaps. I have tried 360 keymap xml files from various github sources, both spmc and xbmc, no dice.
my only complaint of **MC in general is not being able to mess with network buffer sizes in the UI (yes I am that lazy) - usually don't have a problem with 720p mp4/mkv, and this is on wireless, even. but sometimes my landlord uses netflix over wireless and that kills everything else.
archa1c said:
The only thing I continue to stumble with is that pressing the "Home" button returns you to the Fire TV homescreen, backgrounding XBMC. I haven't yet found a way to create a homescreen or "Recents" shortcut for XBMC, so it's a chore to open it every time by navitgating to Settings > Applications...
Click to expand...
Click to collapse
alt-tab isn't bad if you're already into using a keyboard...
I haven't tried it yet but people using alternate launchers have reported using Llama they can make it jump to their preferred launcher after pressing the home button. it might work equally well setting it to jump to xbmc rather than a launcher? hm I may have to try that...
I actually quite like the native Fire TV UI and would be happy with a hacky way to add a shortcut for side-loaded apps to the native menus.
I'm sure it's possible, so I'll be patient and wait for it to happen ?
I don't have any control issues because I'm using the fore TV remote, but I will be plugging in my Windows MCE remote USB IR receiver to see if I can get my Logitech harmony remote working on the fire tv.
The only other thing I would like is a mapping of the back button to "stop" when playing video in XBMC. the default xbmc behavior for the "back" action is to keep playing the current file in the background while displaying the last screen.its a very odd behavior IMO, and with no "stop" button on the fire TV remote, the only workaround is to pause the video when you want to go "back".
Sent from my Nexus 7 using XDA Premium HD app
archa1c said:
I actually quite like the native Fire TV UI and would be happy with a hacky way to add a shortcut for side-loaded apps to the native menus.
I'm sure it's possible, so I'll be patient and wait for it to happen ?
I don't have any control issues because I'm using the fore TV remote, but I will be plugging in my Windows MCE remote USB IR receiver to see if I can get my Logitech harmony remote working on the fire tv.
The only other thing I would like is a mapping of the back button to "stop" when playing video in XBMC. the default xbmc behavior for the "back" action is to keep playing the current file in the background while displaying the last screen.its a very odd behavior IMO, and with no "stop" button on the fire TV remote, the only workaround is to pause the video when you want to go "back".
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
These are the steps that the user over on the XBMC forums posted to help us out with llama:
Event 1:
When phone starts up - set Llama variable 'startup' to 'true'
Event 2:
When the current app is XBMC on Ouya - set Llama variable 'starup' to 'false'
Event 3:
(Use the AND option) {when the current app is KFTV Launcher and when 'startup' has a value of 'false'} - run XBMC on Ouya.
However, you don't have to set KFTV Launcher as the trigger. I just picked a random app I didn't want to use as a jump pad. I installed the smithsonian app and put it in place of the launcher. Now when I open the smithsonian app, it flips back to XBMC. Not efficient, but works better than digging through the settings.
You can re-map buttons in XBMC with an add-on called keymap editor available in the programs menu>program add-ons>get more>key_map editor.
You can also just hit "Select" on the FTV remote and that will bring up the OSD. Then you can just d-pad to the stop button when you want to exit a movie.
v13 gotham beta4 release just came out (ok 2 days ago, I wasn't paying attention I guess). all my complaints about weird undescribable video motion are gone!
and that is even with turning off mediacodec and only having libstagefright turned on! yay!!!
http://xbmc.org/xbmc-13-0-gotham-beta-4/
http://mirrors.xbmc.org/releases/android/arm/
the beta4 announcement also said force update your repositories if you're having problems such as they're no longer staying up to date, or they're suddenly empty, etc.
http://wiki.xbmc.org/index.php?title=Add-on_manager#Force_refresh
they recommended this if you are coming from xbmc v12 (not spmc, it has its own separate file tree) or even if you are coming from earlier betas of v13.
tarvoke said:
v13 gotham beta4 release just came out (ok 2 days ago, I wasn't paying attention I guess). all my complaints about weird undescribable video motion are gone!
and that is even with turning off mediacodec and only having libstagefright turned on! yay!!!
http://xbmc.org/xbmc-13-0-gotham-beta-4/
http://mirrors.xbmc.org/releases/android/arm/
the beta4 announcement also said force update your repositories if you're having problems such as they're no longer staying up to date, or they're suddenly empty, etc.
http://wiki.xbmc.org/index.php?title=Add-on_manager#Force_refresh
they recommended this if you are coming from xbmc v12 (not spmc, it has its own separate file tree) or even if you are coming from earlier betas of v13.
Click to expand...
Click to collapse
I also read that you can install SPMC and XBMC side-by-side due to the unique installation paths and libraries. I may try out the latest Gotham release, but I've been very happy with the performance of SPMC so far.
I really just need the ability to add a shortcut to the main menu, in either "Recent" or "Apps" etc for it to be convenient to access.
archa1c said:
I also read that you can install SPMC and XBMC side-by-side due to the unique installation paths and libraries. I may try out the latest Gotham release, but I've been very happy with the performance of SPMC so far.
Click to expand...
Click to collapse
you got it, they won't step on each other because all the resources and binaries are separated into com.semperax.spmc and org.xmbc.xbmc. which is also a nice way to keep testing v12 vs v13 simultaneously...
although now that the motion-blur-weirdness-but-thats-not-exactly-it, is gone from gotham beta4, I am done with spmc (I could still never figure out why it broke so many buttons of the 360 controller, and I spent hours with keymap xmls and junk, ugh. whereas gotham always worked 100% fine. they both must have built-in keymaps you don't even see in their filetrees, or something)
archa1c said:
I really just need the ability to add a shortcut to the main menu, in either "Recent" or "Apps" etc for it to be convenient to access.
Click to expand...
Click to collapse
yeah it doesn't bother me enough to reinstall nova launcher and mess with Llama.
but, recent, man that would be perfect. until now I was not a big fan of recent-type-behavior (sure, sometimes in the start menu in linux or windows, ok...) - but now with firetv it is awesome.
like, my watchlist menu is turning into some huge unholy mess. but the recent menu is serene and shows me exactly what I was doing: "why yes, sir, latest indications show that you were halfway through season 4 of sg1, and you were also using Plex around the same time".
of course they also jam those stupid semi-ads in the recent menu, so for that, screw 'em.
Something you can try is using the app "llama" to start XBMC whenever a certain program is lauched. For me, I have XBMC start whenever I open the app "Tubi TV". I just chose an app on the store that had an icon I could remember and set it up.
Works very well for me.
Nick0742 said:
Something you can try is using the app "llama" to start XBMC whenever a certain program is lauched. For me, I have XBMC start whenever I open the app "Tubi TV". I just chose an app on the store that had an icon I could remember and set it up.
Works very well for me.
Click to expand...
Click to collapse
Would you be open to sharing exactly how you set this up?
What I can't figure out is how to use the library plugins to index both movies and shows. I have my entire collection in a single folder. Right now I can only enable either one or the other in XBMC. Is there a way to do both at the same time?
Try just adding the same path a second time, except denote it as a different media type the second type.
Not sure if XBMC will reject that or not since you've already added it once as a different content type (TV, movies etc)
Sent from my unknown using Tapatalk 2
solo said:
What I can't figure out is how to use the library plugins to index both movies and shows. I have my entire collection in a single folder. Right now I can only enable either one or the other in XBMC. Is there a way to do both at the same time?
Click to expand...
Click to collapse
I just verified that you can add the same path twice.
The first time, select a "TV Shows" scraper to have it scan TV show content for your library.
The second time, select the 'Movies" scraper to scrape and add Movie content from that directory to your library.
You will likely have some issues with some shows importing to your movie library, and some movies importing to your tv shows due to common names between both (example- Transformers movies will probably get scanner by the TV scraper and add the Transformers tv show series to your TV library).
Aside from these unavoidable duplicate scraping issues, all of your content should load.
I recommend braking our your library into separate directories for "TV Shows" and "Movies".
An easy way to do this is to install Sickbeard to automatically scan and move your TV Shows to a new directory, leaving just movies in your current media directory.
archa1c said:
I just verified that you can add the same path twice.
The first time, select a "TV Shows" scraper to have it scan TV show content for your library.
The second time, select the 'Movies" scraper to scrape and add Movie content from that directory to your library.
You will likely have some issues with some shows importing to your movie library, and some movies importing to your tv shows due to common names between both (example- Transformers movies will probably get scanner by the TV scraper and add the Transformers tv show series to your TV library).
Aside from these unavoidable duplicate scraping issues, all of your content should load.
I recommend braking our your library into separate directories for "TV Shows" and "Movies".
An easy way to do this is to install Sickbeard to automatically scan and move your TV Shows to a new directory, leaving just movies in your current media directory.
Click to expand...
Click to collapse
I actually tried that same tactic before and it didn't work (Frodo). I am going to install Gotham today anyway, will try again.
My setup is that I download via utorrent and when completed, the files are moved to a single folder storage drive mounted on my RT-N66U. XBMC then reads the files from there... I'll look into sickbeard, thanks!
Has anybody tried LiveTV with tvheadend? It does work for me, but I am only able to use the channel that is already tuned. As soon as I try to switch to a different channel then XBMC crashes. It works fine on my Android phone, therefore it must be something with it running on the FireTV.
Gesendet von meinem Nexus 5 mit Tapatalk
Maybe a dumb question but how do i install .zip plugins downloaded from my computer?
NVM reading is my friend...
vogli said:
Has anybody tried LiveTV with tvheadend? It does work for me, but I am only able to use the channel that is already tuned. As soon as I try to switch to a different channel then XBMC crashes. It works fine on my Android phone, therefore it must be something with it running on the FireTV.
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
Am testing with TVH.
Opening a channel is ok, HD or SD (h264 1080i without deinterlace).
Zapping is an issue, no crash but video gets very choppy like 4fps sounds is ok. Stop and Play fixes the issue.
Is the XBMC Ouya still the best xbmc for fire tv atm ?
c0mm0n said:
Is the XBMC Ouya still the best xbmc for fire tv atm ?
Click to expand...
Click to collapse
No, the full 13.1 release for Android ARM from the main is best.
Thx !
Any special tip/setup on hw decoding ?
If i play a movie in xbmc and push the back button it still play.how can i fix so it stop like in my atv 2 ????
prebski said:
If i play a movie in xbmc and push the back button it still play.how can i fix so it stop like in my atv 2 ????
Click to expand...
Click to collapse
This is standard XBMC behavior, i.e. by design. I believe you can change this by editing one of the .xml files XBMC uses and telling it to map back or backspace to stop, but off the top of my head I'm not sure which - keyboard.xml maybe? Google it or check an XBMC forum.
there is a setting in system settings that says like play videos in menu screen or something like that. I can look it up when i get home. A lot of lower powered devices (raspbmc, appletv, etc) have distros that disable that to maximize performance. You just find that and turn it off you should be good to go.
Kurto2021 said:
there is a setting in system settings that says like play videos in menu screen or something like that. I can look it up when i get home. A lot of lower powered devices (raspbmc, appletv, etc) have distros that disable that to maximize performance. You just find that and turn it off you should be good to go.
Click to expand...
Click to collapse
I remember seeing this option recently. I think it is under Background options. Sorry - not at home so can not check.
Ok i disable it but it still running .is there a way to totally stop the video when i click back like it does in apple tv
You need to edit/create keyboard.xml and put a line where the back button stops the video while its playing.
Look for wiki xbmc fire tv. I cant post url here .
Enviado de meu GT-N7100 usando Tapatalk
After two days with an Nvidia Shield Android TV , there are many pluses and minuses, but over all, it has BY FAR the best hardware of any android based box on the market... no question at all about that, and here are what I think are the biggest pluses and minuses.
PLUSES
- amazing smoothness in interface - no jerky, delays etc at all
- superb playback of all media, smoother than any box I have seen
- 192khz 24 bit audio output (kodi and mxplayer but I am not sure if they are able to output at that HD rate)
- very well built, sexy touch activated standby button
- very easy to get up and running with controller etc
- shield game streaming service is flawless, fast, smooth, HD
- gaming controller is high quality, has a microphone for voice input and a headphone socket, which work well.
- Voice search within Play Music for artist or track works very well, extremely fast.
- playing Flash-based websites like TennisTV.com etc on Dolphin in Desktop mode is way better than any other box I have tried (and I have tried MANY)
MINUSES
- have to sideload many apps you may want, like TED, BBC iPlayer, IMDB, Spotify, Movie Mate etc.. even Chrome Browser - but relatively easy to work around using APK Extractor to get APK's from your phone, and Chainfire's sideload launcher.
- no up front display of non-Android TV specific apps
- no recent apps
- no way to get to "now playing" with some apps like Spotify if you had returned home, unless its a leanback app
- no notifications
- no mouse on desktop, backpace key on keyboard not working as backspace but as left mouse click
- Keyboard is USA only, so UK users have to know, for example, that " and @ have swopped places
- voice search from the home screen does not find music artists on google play music or spotify, but only youtube... so "play van morrison" will play a track from youtube, and not from the 25 van morrison albums I have already uploaded to Play Music.
- my tv keeps on cropping a lot off the screen, there is no way to adjust the screen crop size, to reduce size so it fits better on my screen... I can adjust my screen but that is a hassle.
- very little customisation, settings limited too.
There is at least one NON-Android TV ROM for this device, so you can fix almost all of those Minuses, and you can run it using Squarehome or NovaLauncher or whatever you like, but I am not sure I actually NEED to customise the box. Personally I use it for Kodi, Spotify, Play Music, TuneIn Radio, Youtube, Movie Mate, all of which works fine... so for the moment, I am not rooting the box, and am adjusting my expectations and enjoying what works fantastically well, pretty much everything.
This is FAR and away the best box I have ever had, goodbye Tronsmart Drako, Minix Neo X8H+ etc, this is WAY beyond. At some point I may change to plain android, but so far I am fine with a couple of extra steps to be able to enjoy the voice input and superb power and playback capabilities.
Mark.
Hi. I'm located in Ireland and looking for android TV box for my FHD projector. I'm considering MINIX Neo X8H+ or Nvidia Shield TV box (not yet available). What advantages of one over the other would you point? Thanks!
The Answer to The Ultimate Question of Life, the Universe, and Everything is: CLEAN FLASH.
Natakranta said:
Hi. I'm located in Ireland and looking for android TV box for my FHD projector. I'm considering MINIX Neo X8H+ or Nvidia Shield TV box (not yet available). What advantages of one over the other would you point? Thanks!
The Answer to The Ultimate Question of Life, the Universe, and Everything is: CLEAN FLASH.
Click to expand...
Click to collapse
Minix Neo offers access to almost all the play store apps without needing to sideload, with the Shield you need to sideload some apps, which isnt hard. The Shield has far better hardware, so you will get smoother HD playback, no question. If playing video is your main think, then the Shield's faster graphics, faster processor is the way to go. They are both good boxes, but my Minix Neo x8hplus is currently UNPLUGGED!
fredphoesh said:
Minix Neo offers access to almost all the play store apps without needing to sideload, with the Shield you need to sideload some apps, which isnt hard. The Shield has far better hardware, so you will get smoother HD playback, no question. If playing video is your main think, then the Shield's faster graphics, faster processor is the way to go. They are both good boxes, but my Minix Neo x8hplus is currently UNPLUGGED!
Click to expand...
Click to collapse
I'd like to connect external 2GB HDD USB 3 to the box. Make it media storage to play on the connected to the box projector and available for all devices in home through my local WiFi.
How could I remotely control the box to manage utorrent on it from my phone, at home thorough local WiFi or externally when I'm away. Possible?
The Answer to The Ultimate Question of Life, the Universe, and Everything is: CLEAN FLASH.
Natakranta said:
I'd like to connect external 2GB HDD USB 3 to the box. Make it media storage to play on the connected to the box projector and available for all devices in home through my local WiFi.
How could I remotely control the box to manage utorrent on it from my phone, at home thorough local WiFi or externally when I'm away. Possible?
The Answer to The Ultimate Question of Life, the Universe, and Everything is: CLEAN FLASH.
Click to expand...
Click to collapse
Hi, sorry, no idea, I use it for streaming...
Sent from my SM-N910F using Tapatalk
fredphoesh said:
MINUSES
- no up front display of non-Android TV specific apps
- no recent apps
- no way to get to "now playing" with some apps like Spotify if you had returned home, unless its a leanback app
- very little customisation, settings limited too.
Mark.
Click to expand...
Click to collapse
Hi Mark! For your minuses mentioned above, you might want to consider HALauncher found in the Play Store. I'm using this on my Nvidia Shield Console/TV and it looks and works better than the default Android TV "Home" launcher. This apps allows you to create your own Home screen with rows of your customized apps. For example, I have a row for my Emulators, Racing Games, Space Shooters, Sports Games, TV apps, etc. You can arrange these rows and apps anyway you want. You can also use your own background image. You can also rename the apps to your liking and edit the icons for higher quality 320x180 images. Everything looks great now. This is what Android TV home launcher should be like. The only thing that is missing now is a button for rebooting the system, and another one for shutting it down!
Check out the images below to see what HALauncher can do:
http://postimg.org/image/kuncrk5tf/
http://postimg.org/image/57w3e6s1f/
http://postimg.org/image/fkie09lkj
http://postimg.org/image/mjwfzmlir/
-- Manny
funtasticguy said:
Hi Mark! For your minuses mentioned above, you might want to consider HALauncher found in the Play Store. I'm using this on my Nvidia Shield Console/TV and it looks and works better than the default Android TV "Home" launcher. This apps allows you to create your own Home screen with rows of your customized apps. For example, I have a row for my Emulators, Racing Games, Space Shooters, Sports Games, TV apps, etc. You can arrange these rows and apps anyway you want. You can also use your own background image. You can also rename the apps to your liking and edit the icons for higher quality 320x180 images. Everything looks great now. This is what Android TV home launcher should be like. The only thing that is missing now is a button for rebooting the system, and another one for shutting it down!
Check out the images below to see what HALauncher can do:
http://postimg.org/image/kuncrk5tf/
http://postimg.org/image/57w3e6s1f/
http://postimg.org/image/fkie09lkj
http://postimg.org/image/mjwfzmlir/
-- Manny
Click to expand...
Click to collapse
Hi Manny,
Yep, I've been using it for a few days and like it a lot.
My gripes are that the voice search doesn't work properly and always shows empty results, and there is no "now playing" function... and the lack of a power button. For some reason ALT-Tab doesn't show recent apps. Oh, there is no ALL APPS function either, so new apps are invisible till you edit the home screen. But yeah, the best home screen for the SATV for sure.
Cheers,
Mark
Sent from my SM-N910F using Tapatalk
I agree with pretty much everything you said, I've had mine for two weeks and I love it. I have Kodi running to play local media, plex to stream stuff from friends servers, Netflix (which really upped their game since the last time I subscribed a year or two ago), along with tons of games. This will only get better over time, its still a relatively new product. I'm still debating on whether or not to root it, I think I'm going to but will be keeping the stock launcher because I like it, despite the lack of "recent apps" which I still don't understand why they didn't include it. The only reason I want to root it is so that I can install the Xinstaller module from Xposed so all my apps will install to my sdcard and not the internal memory.
Sent from my Nexus 6 using Tapatalk
I have had mine a few weeks and it is definitely a really nice device and it is crazy fast!
Really the only gripe I have is 4K support but that isn't Nvidia's fault. Basically because I am running through a processor (more or less an AVR without an amp) and HDMI 2.0 standard is not used on them, Netflix won't show 4K content on the device unless I am directly connected to the TV.
Fortunately Ultraflix works at 4K and everything else does as well.
brando56894 said:
I agree with pretty much everything you said, I've had mine for two weeks and I love it. I have Kodi running to play local media, plex to stream stuff from friends servers, Netflix (which really upped their game since the last time I subscribed a year or two ago), along with tons of games. This will only get better over time, its still a relatively new product. I'm still debating on whether or not to root it, I think I'm going to but will be keeping the stock launcher because I like it, despite the lack of "recent apps" which I still don't understand why they didn't include it. The only reason I want to root it is so that I can install the Xinstaller module from Xposed so all my apps will install to my sdcard and not the internal memory.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Try HALauncher, it is good enough for me to not install a custom rom and root... So far! Also once you root you'll have to manually install rom updates and reinstall apps etc... Also you can move most apps to sd card. DON'T set to Automatically Move apps to SD card, that doesn't work. Install to system then move them to SD card in app settings after player no the game once.
Sent from my SM-N910F using Tapatalk
Had mine for about a week and like it an awful lot.
As someone who bought an Ouya, I must say focusing on the media services first THEN worrying about gaming made this a MUCH BETTER product.
I am a bit disappointed I can't have my HBO Go on it, there's currently no Amazon Video and the Netflix app needs better voice options, but I'm really digging the Gamestream from my PC upstairs to the downstairs TV, It works most of the time without a hitch. The only time it doesn't is when I'm playing my Steam games and the Ubisoft games try to go through Uplay and Uplay crashes or its a game I've never ran before and Steam itself crashes because it doesn't seem to like running a game in Big Picture mode if it has never been opened and ran at least once on my PC in normal Steam mode first, and those are client problems, not Nvidia issues so can't fault them there.
Yes, having to install some of my apps from the PC through the Play Store is a bit of a pain, but it also keeps the kids from loading it up with a bunch of useless crap, so I'd say its a fair trade.
tobalaz said:
Had mine for about a week and like it an awful lot.
As someone who bought an Ouya, I must say focusing on the media services first THEN worrying about gaming made this a MUCH BETTER product.
I am a bit disappointed I can't have my HBO Go on it, there's currently no Amazon Video and the Netflix app needs better voice options, but I'm really digging the Gamestream from my PC upstairs to the downstairs TV, It works most of the time without a hitch. The only time it doesn't is when I'm playing my Steam games and the Ubisoft games try to go through Uplay and Uplay crashes or its a game I've never ran before and Steam itself crashes because it doesn't seem to like running a game in Big Picture mode if it has never been opened and ran at least once on my PC in normal Steam mode first, and those are client problems, not Nvidia issues so can't fault them there.
Yes, having to install some of my apps from the PC through the Play Store is a bit of a pain, but it also keeps the kids from loading it up with a bunch of useless crap, so I'd say its a fair trade.
Click to expand...
Click to collapse
Oh yes, speaking of Gamestream, what does everyone think of the quality?
I tried it both before and after the update that was supposed to improve the quality and have not been that impressed. The bitrate seems somewhat low and I get random stutter and both the PC and Shield are wired gigabit.
Well as far as Gamestream goes for me, I've got my win7 gaming rig w/ an i5, 12gb ram and gtx 750ti hardwired to my Buffalo AC1750 and the Shield on 5g to a 42" 1080p TV and I've no problems with it, everything runs smoothly, well, smoothly when Uplay isn't f*cking everything up...
I had issues initially so I had to go into my router and change the settings for my 5ghz channel.
OK interesting, maybe it is is an issue with SLI since I am running 3 Titan Xs, i7, 32GB RAM, etc through an Asus RT-AC3200. I will try disabling SLI and see if that helps.
mutelight said:
OK interesting, maybe it is is an issue with SLI since I am running 3 Titan Xs, i7, 32GB RAM, etc through an Asus RT-AC3200. I will try disabling SLI and see if that helps.
Click to expand...
Click to collapse
You've really peaked my interest here, was the SLI making it not work correctly? Like maybe the video encoding being slit amongst the cards wasn't working too well?
I'm about to upgrade my 750ti so it'd be nice to know if it was SLI or just isn't playing nice with your Titan.
tobalaz said:
You've really peaked my interest here, was the SLI making it not work correctly? Like maybe the video encoding being slit amongst the cards wasn't working too well?
I'm about to upgrade my 750ti so it'd be nice to know if it was SLI or just isn't playing nice with your Titan.
Click to expand...
Click to collapse
It is honestly hard to say, I still need to try disabling SLI to see if it helps. Also I should mention I have been running Windows 10 for a couple months now there have been a few driver updates for it since I tried it last.
Video calling only available for the Shield ATV
One unique feature on the Shield ATV is the camera support.
Just plug a camera and it works! I've been checking out other Android SmartTV's and set-top-boxes, but yet couldn't find any other device having this support.
And, there is already a video calling android tv app on google play called "Tellybean - Easy video calling". It works perfectly on the Shield ATV.
furkna said:
One unique feature on the Shield ATV is the camera support.
Just plug a camera and it works! I've been checking out other Android SmartTV's and set-top-boxes, but yet couldn't find any other device having this support.
And, there is already a video calling android tv app on google play called "Tellybean - Easy video calling". It works perfectly on the Shield ATV.
Click to expand...
Click to collapse
Nice, but surely Hangouts works just fine, and even Skype?
fredphoesh said:
Nice, but surely Hangouts works just fine, and even Skype?
Click to expand...
Click to collapse
Your right. Since shield has camera support basically any video calling app might work. But I don't believe they work as smooth as Tellybean. Skype and hangout does not have Android TV apps (not gonna have one any time soon). They don't exist on google play for Android TV. You need to sideload their default android app.
Also, their UX is fine for a mobile app but not so much for a TV app. They don't really fit into the leanback UI. Not so usable if you are sitting on the couch and just want to have a video call. I use hangouts and skype on my smartphone and laptop but Tellybean on my TV
Tellybean is an Android TV app, shows up on Leanback launcher and it works smoothly on the shield ATV.
tobalaz said:
Well as far as Gamestream goes for me, I've got my win7 gaming rig w/ an i5, 12gb ram and gtx 750ti hardwired to my Buffalo AC1750 and the Shield on 5g to a 42" 1080p TV and I've no problems with it, everything runs smoothly, well, smoothly when Uplay isn't f*cking everything up...
I had issues initially so I had to go into my router and change the settings for my 5ghz channel.
Click to expand...
Click to collapse
Hello! From Italy here! 10 days I have a 16Gb unit I struggle with Ethernet AND wifi 5Gb connection! Wifi N working about fine. Netgear R7000 and Fastweb FTTS connection 85MBps! I only get 10 MBps at most, and this is the only device that gets this low! Need to solve this or ask for replacement the soonest! Any help much appreciated.
Regards
Alessandro
Hi all. I'm brand new to XDA and to anything having to do with customizing apps, but very eager to learn. I have been testing a few TV boxes like MeCool M8s Pro L, ubox (HKG), A95X Max etc... One thing I have noticed is while all claim to be Android TV boxes, some play apps in the Leanback version (such as MeCool) while others seem to be glorified mobile phone replicas.
One app, in particular, would be the MyTunerFree radio app. On the MeCool it can be used with a Dpad remote and works perfect, however on the A95X, it only opens in the mobile mode, with no option for the android TVmode, and you need a mouse toggle app, or actual mouse to use it. I have been searching online for ways to force an app to play in its TV version only, but cannot find much. I have seen suggestions with using app cloner, but even then it doesn't force the TV mode, just allows you to add an on screen pointer, which does not allow scrolling (hope I am making sense)
Does anyone have any suggestions on how to force the app to its TV mode while using a box that seems to have a mobile operating system? Or is there a developer setting on the box I could change to force all apps into TV mode?
Sorry if this has been dealt with. I searched, but didn't see much. Keep in mind I'm a newbie. Cheers
M
You're right but not all apps some apps works with all versions of android in other hand some you need to download it and install by the tv box
You can try "Set Orientation App" to force this into landscape mode.
This is the exact problem Im having with Pendoo X10 MAX, one app I always use with android tv is mx player pro, but this crappy little PendooX10 always launches mx player pro like I'm using it on a mobile device, and the option to launch in tv mode is missing from the mxplayer settings menu.
Sucks that nobody else is having this problem, was hoping someone had a fix for this by now.
leodawson said:
This is the exact problem Im having with Pendoo X10 MAX, one app I always use with android tv is mx player pro, but this crappy little PendooX10 always launches mx player pro like I'm using it on a mobile device, and the option to launch in tv mode is missing from the mxplayer settings menu.
Sucks that nobody else is having this problem, was hoping someone had a fix for this by now.
Click to expand...
Click to collapse
Sideload a oriantation / rotation app and set it to landscape mode. Should work with MX player and other apps
Hi there I've got my hands on that beast but 2 things bother me while mirroring stuff via WiFi/Bluetooth .
So I'm playing a game on my phone I'm using Miracast on my TV to cast it to the TV screen but the game doesn't launch in full screen it's more like middle of the screen with up and down having black border.
Also quality of mirroring is idk 720p maybe? Any ideas if that's just the way it should be or there's a way around that? I don't really have a pc to adjust anything with the software so any solution would be nice unless there's none. Btw I turned on in settings for games or apps to run in full screen they just don't.
Cosmosnox said:
Hi there I've got my hands on that beast but 2 things bother me while mirroring stuff via WiFi/Bluetooth .
So I'm playing a game on my phone I'm using Miracast on my TV to cast it to the TV screen but the game doesn't launch in full screen it's more like middle of the screen with up and down having black border.
Also quality of mirroring is idk 720p maybe? Any ideas if that's just the way it should be or there's a way around that? I don't really have a pc to adjust anything with the software so any solution would be nice unless there's none. Btw I turned on in settings for games or apps to run in full screen they just don't.
Click to expand...
Click to collapse
In apps like YouTube, if you click Full-Screen button the image changes from portrait (with black side bars) to landscape.
Check if Ithere is a setting available to force your game app to run "full-screen"?
I agree with you, even full-scree landscape, the picture quality doesnt look like HQ resolution to me.