I recently installed cm7.0.3 and flashed gapps where I was able to download and install one messaging app. However now when I try to download and install any other app such as Opera, I see the download arrow which quickly disappears and does not install. Thus far, for any app I download, it does not install.
I did find a thread while googling for answers, but I can't install the app. Here were the instructions:
1. Backup SD Card
2. Partition your SD Card with Rom Manager (512mb/64mb swap)
3. Install Simple2Ext (You can find it in the Android Market)
4. Open Simple2Ext and toggle on 'Download Cache'.
5. Now, reboot your Desire and you should be able to install apps.
Click to expand...
Click to collapse
So I can't really continue with it. I also don't know where the .apk files are downloaded to so I can't be sure that the system just doesn't immediately delete it
after flashing gapps, did you wipe your cache and dalvik cache?
I am not sure I did, I remember doing that when flashing cm7 but I doubt I did while flashing Gapps. What are the commands to do that? (unless there is an option in the interface somewhere)
EDIT: I found it in recovery mode. Ah that works. Thanks.
clicking the button thanks would be nice
Hey guys I need some help! So I have an AT&T Samsung Galaxy Note II and I am currently on Cyanogen mod (Version: 10.2-20131214-Snapshot-InstallerWPPQ50St0lteatt). I got cyanogen mod by using their simple installer that used to be on the play store. I want to switch to Omnirom but I need step by step instructions to do this. I have CWM. BTW I don't even know if my phone is rooted since I used that simple Cyanogen mod installer. Please Help! Thanks!
Root doesn't matter at this point.
Short version: You can download the t0lte (t0lteatt is deprecated) OmniROM installer (and gapps, assuming you want them) to your phone's SD card, reboot to recovery and install both zip files, clear user data and reboot. First reboot will be a bit longer than usual. But I recommend you stick to the longer version below.
Long version:
Backup your apps using Titanium Backup.
Download OmniROM, gapps and SuperSU to your phone's (internal or external) SD card.
Download TWRP (Teamwin Recovery Project, a touchscreen interface recovery) zip file installer to your SD card. This will allow you to update OmniROM through their OpenDelta system, the ROM is able to automatically download small incremental update files for the latest nightly build, notify you that there's an update and install it in one click. (Put your gapps zip in the /sdcard/OpenDelta/FlashAfterUpdate folder. Mine also has the sensors fix, Xposed framework toggle and one or two other little mods.)
Reboot to CWM recovery.
Install the TWRP zip from SD card
From CWM's advanced menu, reboot recovery. (Or reboot to CM, and recovery again.)
From TWRP, make a full backup.
Once that's done and you're back to the main menu, click "Install" and select the OmniROM zip.
Add the gapps zip
Add the SuperSU zip
Slide to install
Clear user data
Reboot
Proceed with activation, restore your apps and their data.
Enjoy!
Good luck,
Darkshado
Darkshado said:
Root doesn't matter at this point.
Short version: You can download the t0lte (t0lteatt is deprecated) OmniROM installer (and gapps, assuming you want them) to your phone's SD card, reboot to recovery and install both zip files, clear user data and reboot. First reboot will be a bit longer than usual. But I recommend you stick to the longer version below.
Long version:
Backup your apps using Titanium Backup.
Download OmniROM, gapps and SuperSU to your phone's (internal or external) SD card.
Download TWRP (Teamwin Recovery Project, a touchscreen interface recovery) zip file installer to your SD card. This will allow you to update OmniROM through their OpenDelta system, the ROM is able to automatically download small incremental update files for the latest nightly build, notify you that there's an update and install it in one click. (Put your gapps zip in the /sdcard/OpenDelta/FlashAfterUpdate folder. Mine also has the sensors fix, Xposed framework toggle and one or two other little mods.)
Reboot to CWM recovery.
Install the TWRP zip from SD card
From CWM's advanced menu, reboot recovery. (Or reboot to CM, and recovery again.)
From TWRP, make a full backup.
Once that's done and you're back to the main menu, click "Install" and select the OmniROM zip.
Add the gapps zip
Add the SuperSU zip
Slide to install
Clear user data
Reboot
Proceed with activation, restore your apps and their data.
Enjoy!
Good luck,
Darkshado
Click to expand...
Click to collapse
Thanks 4 the help hit thanks
Video?
Thank you so much for the help! I really do appreciate it! Is there any video you could link that gives these instructions but in a video maybe? Just so I don't get confused in the middle of the process. Thanks for the help!
Darkshado said:
Root doesn't matter at this point.
Short version: You can download the t0lte (t0lteatt is deprecated) OmniROM installer (and gapps, assuming you want them) to your phone's SD card, reboot to recovery and install both zip files, clear user data and reboot. First reboot will be a bit longer than usual. But I recommend you stick to the longer version below.
Long version:
Backup your apps using Titanium Backup.
Download OmniROM, gapps and SuperSU to your phone's (internal or external) SD card.
Download TWRP (Teamwin Recovery Project, a touchscreen interface recovery) zip file installer to your SD card. This will allow you to update OmniROM through their OpenDelta system, the ROM is able to automatically download small incremental update files for the latest nightly build, notify you that there's an update and install it in one click. (Put your gapps zip in the /sdcard/OpenDelta/FlashAfterUpdate folder. Mine also has the sensors fix, Xposed framework toggle and one or two other little mods.)
Reboot to CWM recovery.
Install the TWRP zip from SD card
From CWM's advanced menu, reboot recovery. (Or reboot to CM, and recovery again.)
From TWRP, make a full backup.
Once that's done and you're back to the main menu, click "Install" and select the OmniROM zip.
Add the gapps zip
Add the SuperSU zip
Slide to install
Clear user data
Reboot
Proceed with activation, restore your apps and their data.
Enjoy!
Good luck,
Darkshado
Click to expand...
Click to collapse
DISCONTINUED
Sorry .. due to limited time I have stopped this ROM.
Pls find the last downloads here ..
https://androidfilehost.com/?w=files&flid=289294
Thanks for understanding ..
Resurrection Remix for manta ..
RR-P-v7.0.0-20190208-manta-Unofficial.zip
Known issues:
- HWC (hardware composer) is partly broken (icons are not shown correctly and black home screen)
- NavBar is not visible - same hwc issues like above !
- Encryption seems not work - and has not been tested. -> Pls do not encrypt your data partition yet.
- NFC has been taken out - still not working.
- Camera is not working .. same problem like on Nougat. (broken HAL1 camera and unsupported HAL2 camera)
- If you set pin, pattern or password to unlock the device pls be patient - if you press "confirm" the system is freezing for a few minutes - just wait.
RR-O-v6.2.1-20181209-manta-Unofficial.zip
Known issues:
- Encryption seems not work - and has not been tested. -> Pls do not encrypt your data partition yet.
- NFC has been taken out - still not working.
- Camera is not working .. same problem like on Nougat. (broken HAL1 camera and unsupported HAL2 camera)
- If you set pin, pattern or password to unlock the device pls be patient - if you press "confirm" the system is freezing for a few minutes - just wait.
System and Cache repartitioning / Opengapps: Error 70
The current system partition is (getting) full !
You need to do repartition your system and cache partitions .. either via TWRP package or manually via shell.
It's an one time task.
But the filesystem of the system.img inside the ROM will keep always the same size .. approx. 800mb.
The filesystem does not know the "real" size of the actual partition.
In general .. If you install an image into a partition the filesystem will have the size of the image (in our case 800mb).
The free space we got thru repartitioning needs to be allocated again.
For this reason we need to enlarge/resize the filesystem after each ROM update and/or clean install.
Only the filesystem .. the partition itself will stay untouched.
The automatic enlarge/resize of the filesystem is part of the ROM installer.
For manual repartitioning have a look here:
https://forum.xda-developers.com/showpost.php?p=77759823&postcount=953
https://forum.xda-developers.com/showpost.php?p=77762148&postcount=954
For automatic repartitioning have a look here:
https://forum.xda-developers.com/showpost.php?p=77764246&postcount=957
https://forum.xda-developers.com/showpost.php?p=77770425&postcount=960
@ipdev - Thanks for your TWRP flashable repartitioning package !
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data. (Not required if you upgrade from previous build)
3. Install RR-O-v6.x.x-yyyymmdd-manta-Unofficial.zip
4. install Opengapps or other Gapps package
5. install Magisk.zip
6. Reboot into system ..
- Please install Magisk.zip (17.x) yourself.
- If you had gapps installed before you don't need to install gapps again - the installer will take care.
- If you face any strange issues, pls do a factory reset via TWRP first.
SOURCES:
If you want to build your own ROM ..
https://github.com/followmsi/manifests/tree/manta-rros-lineage-16.0
https://github.com/followmsi/manifests/tree/manta-rros-lineage-15.1
Download:
https://androidfilehost.com/?w=files&flid=289294
https://drive.google.com/open?id=0By6p5AdQfavBNHkxVWhNOW5CdVk
Enjoy Resurrection Remix on your Nexus 10 ..
Finally it's own thread ..
August 2018
RR-O-v6.1.0-20180814-manta-Unofficial.zip
Changes:
- Google August 2018 Security updates
- Adjust DRM blobs
- ro.opa.eligible_device=true -> Google Assistant
- Latest LineageOS and RR changes
Enjoy
Awesome mate. You never think for abandon the old device. Thanks for your patience and dedication to the device.
Here one thing I want to know, is it first needed the lineage-xx.x-yyyyyyyy-UNOFFICIAL-manta.zip to flash on the device what you have mentioned on your first post then the RR-O-v6.1.0-20180814-manta-Unofficial.zip on the second post.??
Again appreciate your hard work Thanks so much.
Triggered from RN5pro
amitroutray said:
Awesome mate. You never think for abandon the old device. Thanks for your patience and dedication to the device.
Here one thing I want to know, is it first needed the lineage-xx.x-yyyyyyyy-UNOFFICIAL-manta.zip to flash on the device what you have mentioned on your first post then the RR-O-v6.1.0-20180814-manta-Unofficial.zip on the second post.??
Again appreciate your hard work Thanks so much.
Triggered from RN5pro
Click to expand...
Click to collapse
No .. RR is it's own ROM .. Even it's based on Lineage you don't need to install it first.
Just corrected the typo ..
3. Install RR-O-v6.x.x-yyyymmdd-manta-Unofficial.zip
Cheers
followmsi, great work, thanks.
FYI I think this latest build might be a little bigger than previous builds? I used your pico w/ the 6mb buffer, and it was still giving me the not enough space error. I tried it with latest open gapps and changing buffer to 2mb, with the same result. So I deleted some system apps like Easter egg, calculator, camera, etc., and then the pico gapps installed. Then I reinstalled the ROM to get those apps back, realizing that the ROM keeps existing gapps (thanks for mentioning it). Seems to have worked.
Giving it a test run over the next couple days. I used f2fs for data and cache, btw. Thanks again.
Edit: I got the google play services error and reinstalled like this: wipe system, install ROM, delete camera and onetimeinstall and calculator (IIRC), install latest pico open gapps w/ 6mb mod. Took a few flashes and reboots for magisk to install. Everything seems to be working now, at least everything that is supposed to work for oreo on N10. Seems pretty smooth.
Wow this is great, can I dirty flash this over the recnt nougat build? RR-N-v5.8.5-20180413-manta-Unofficial.zip
yeoldeusrename said:
followmsi, great work, thanks.
FYI I think this latest build might be a little bigger than previous builds? I used your pico w/ the 6mb buffer, and it was still giving me the not enough space error. I tried it with latest open gapps and changing buffer to 2mb, with the same result. So I deleted some system apps like Easter egg, calculator, camera, etc., and then the pico gapps installed. Then I reinstalled the ROM to get those apps back, realizing that the ROM keeps existing gapps (thanks for mentioning it). Seems to have worked.
Giving it a test run over the next couple days. I used f2fs for data and cache, btw. Thanks again.
Edit: I got the google play services error and reinstalled like this: wipe system, install ROM, delete camera and onetimeinstall and calculator (IIRC), install latest pico open gapps w/ 6mb mod. Took a few flashes and reboots for magisk to install. Everything seems to be working now, at least everything that is supposed to work for oreo on N10. Seems pretty smooth.
Click to expand...
Click to collapse
Yes .. it's actually 2 things .. gapps pico packages has been grown ... From ~105mb (may) to ~125mb (today)
As well RR made some additional changes (not part of lineage code) to optimize the compression of aapt. (.apk sizes)
I have taken out the changes now.
For next release camera will be taken out from build.
You may take gapps config file using "smallbuffer" parameter to use 2mb right away.
Or change buffer inside installer to another value.
Similar problems will happen for los-15.1 if the pico gapps size is still growing.
someguyatx said:
Wow this is great, can I dirty flash this over the recnt nougat build? RR-N-v5.8.5-20180413-manta-Unofficial.zip
Click to expand...
Click to collapse
Yes, still take backup before.
Wipe system and install ROM and pico gapps and maybe magisk.
Wipe cache and davlik and reboot into system.
Good luck !
@followmsi I am getting Error: 7 while flashing the ROM.
Triggered from RN5pro
followmsi said:
Yes, still take backup before.
Wipe system and install ROM and pico gapps and maybe magisk.
Wipe cache and davlik and reboot into system.
Good luck !
Click to expand...
Click to collapse
Thanks I will give it a try tonight. Nothing important enough to backup this is just my entertainment tablet.
amitroutray said:
@followmsi I am getting Error: 7 while flashing the ROM.
Triggered from RN5pro
Click to expand...
Click to collapse
Wipe system before rom install and get started again.. use older gapps because of space situation on system partition.
followmsi said:
Wipe system before rom install and get started again.. use older gapps because of space situation on system partition.
Click to expand...
Click to collapse
I always do a clean flash. Wiped System, Data, Delvik Cache & Cache. Downloaded the Gapps mentioned on the OP.
Triggered from my Nexus 10
amitroutray said:
I always do a clean flash. Wiped System, Data, Delvik Cache & Cache. Downloaded the Gapps mentioned on the OP.
Triggered from my Nexus 10
Click to expand...
Click to collapse
For now .. after ROM Installation and before gapps installation do mount /system in twrp - but untick read-only.
Go to system/app (priv-app) and remove the camera2 apk.
Unmount system and install mentioned gapps pico.
It's a space problem !
Will check if I can reduce system space usage a bit more ..as well reducing buffer for gapps down to 2MB.
Cheers
followmsi said:
Wipe system before rom install and get started again.. use older gapps because of space situation on system partition.
Click to expand...
Click to collapse
This process worked except I had to do this to get gapps to work
“For now .. after ROM Installation and before gapps installation do mount /system in twrp - but untick read-only.
Go to system/app (priv-app) and remove the camera2 apk.
Unmount system and install mentioned gapps pico.”
One more question do I need to install that audiojack kernel or is already in the rom?
someguyatx said:
This process worked except I had to do this to get gapps to work
“For now .. after ROM Installation and before gapps installation do mount /system in twrp - but untick read-only.
Go to system/app (priv-app) and remove the camera2 apk.
Unmount system and install mentioned gapps pico.”
One more question do I need to install that audiojack kernel or is already in the rom?
Click to expand...
Click to collapse
Audio jack kernel is part of this ROM ..
Depending on the gapps package size you may have to delete camera2.apk - to increase free space for gapps installation.
September 2018
RR-O-v6.2.0-20180909-manta-Unofficial.zip
Changes:
- Google Security updates -> September 2018
- moved shim libs to vendor
- Latest LineageOS and RR changes (update to version 6.2.0)
Enjoy
Hi !
I flashed the September version with a clean flash (full wipe). I tried to flash both "manta_open_gapps-arm-8.1-pico-20180702-UNOFFICIAL.zip" and "open_gapps-arm-8.1-pico-20180902-UNOFFICIAL.zip" from your GDrive, but after a (sucessful) flash in TWRP 3.2.0, the First time Pixel setup has Google Play services crashing in loops in anytime.
This prevents me from going further into using Gapps.
I also tried removing stuff from priv-apk in system, but I couldn't find the camera apk. I got rid of EasterEgg, but that didn't cut through.
Any help for troubleshooting ?
Don Moahskarton said:
Hi !
I flashed the September version with a clean flash (full wipe). I tried to flash both "manta_open_gapps-arm-8.1-pico-20180702-UNOFFICIAL.zip" and "open_gapps-arm-8.1-pico-20180902-UNOFFICIAL.zip" from your GDrive, but after a (sucessful) flash in TWRP 3.2.0, the First time Pixel setup has Google Play services crashing in loops in anytime.
This prevents me from going further into using Gapps.
I also tried removing stuff from priv-apk in system, but I couldn't find the camera apk. I got rid of EasterEgg, but that didn't cut through.
Any help for troubleshooting ?
Click to expand...
Click to collapse
- install latest TWRP (3.2.3)
- Wipe systen first.
- Install current ROM
- Install just one Gapps package (manta_open_gapps-arm-8.1-pico-20180702-UNOFFICIAL.zip - buffer has been reduced to fit into manta system partition)
- Wipe cache / dalvik
- Reboot system
If SetupWizard is crashing we will need logs for further troubleshooting.
Somehow it immediately worked by following closely your instructions. I must have done something wrong before then.
Thanks a lot still, and very kudos for this ROM : )
root access
Fyi it did not like addonsu 15.1 for what ever reason, it was flashed via TWRP and turned on in dev mode but never gave access .. However Magisk flashed fine from TWRP and gave root access so no problem. had to have my Adaway from XDA.
HI, I have a problem. I've wiped all data from my samsung galaxy s3 mini using twrp, downloaded liangeos 15.1 for my phone + ARM 8.1 opengapps and put it in the miscrosd card in my phone. Then I've installed liangeos and opengapps. The system installed but opengapps installation freezed on something like "Gathering system ROM information". It was like that for a long time and after that it returned to the twrp main menu. After restarting system I've found out that system installed correctly but gapps no. Any solllutions?
Cubixor said:
HI, I have a problem. I've wiped all data from my samsung galaxy s3 mini using twrp, downloaded liangeos 15.1 for my phone + ARM 8.1 opengapps and put it in the miscrosd card in my phone. Then I've installed liangeos and opengapps. The system installed but opengapps installation freezed on something like "Gathering system ROM information". It was like that for a long time and after that it returned to the twrp main menu. After restarting system I've found out that system installed correctly but gapps no. Any solllutions?
Click to expand...
Click to collapse
Use smaller GApps. S3 mini has rather limited use cases nowadays. Do you really need GApps?
And try nougat rom from novafusion.pl
Hello so I tried installing lineageos. I used twrp 3.3.1, i opened it up from fastboot. I formatted data, Wiped, Dalvik cache, system, data. Then I moved the zip file from lineage os from pc, i tried flashing it and It ended up giving me error 1. I gave up on this. I wiped the whole thing again and tried backing up with backup I took before all that. It's giving me out partition not found. Im currently still in twrp mode. What do I do?
Lineage
Fanshi said:
Hello so I tried installing lineageos. I used twrp 3.3.1, i opened it up from fastboot. I formatted data, Wiped, Dalvik cache, system, data. Then I moved the zip file from lineage os from pc, i tried flashing it and It ended up giving me error 1. I gave up on this. I wiped the whole thing again and tried backing up with backup I took before all that. It's giving me out partition not found. Im currently still in twrp mode. What do I do?
Click to expand...
Click to collapse
I am braain I read everything, when you install a Roms you must also have the gapps (open Gapps App site) then look you have to know armeabi7a which is your processor and click, then choose the size of the Gapps (I choose the nano) and then download i think you use pc? downloaded no extract put it in SDmicro, you have also downloaded the Rom Laneage put it together with Gapps so you have in the download folder in SD two zip. The rom stock that you backed up and tried to restore did not restart because you have to put back the original stock firmware, you understand why you have to do it all over again, then another thing you do back up just for the old stock and then in TWRP go to Wipe click and make cache, date, Dalvik, done system slides and again says done and go in the zip first the ROM flash has to say successful operation, then flash the Gapps and then it returns in the Wipe button click and go in Dalvik / Cache and then restart ok in boot. Remember if you want to put the Rom back in stock the Xiaomi firmware cancels Laneage you always have to start over it does so. By?