Related
Hello,
I have had my HTC One M8 for a while now but I wasn't really happy with the soundquality while playing through my headphones, so I looked for ways to improve it. I found a few methods and finally decided to give it a try. These methods require a root so yesterday I have rooted my phone for the first time. Unfortunately I am experiencing some problems now.
The rooting process went without too much trouble. I used hasoon2000's toolkit and have TWRP version 2.7.0.2 installed as recovery and used it to install the provided SuperSU, which didn't work at first. On the forums I found a newer version and installed that one, updated it and got it to work.
Now this is where I think I messed up: I read somewhere that when rooted, you are able to delete pre-installed apps from the phone. I downloaded SD maid and deleted Kid Mode, Zoe and 7digital. When I deleted Kid Mode I got an error saying it has crashed. I tapped away the error but from this point I couldn't go back to my homescreen anymore because my launcher kept crashing (com.htc.launcher crashed). I rebooted the phone and the launcher worked again, but the phone still seemed to be buggy.
After this I tried to install the snapdragon audio+ (this was my first choice for an equalizer). I downloaded the apk and moved it to the system folder using ES file manager. I installed but when I tried to use it (through settings in google play music app) my phone would crash. I uninstalled it and tried again, but when I tried to move the apk to the system map like before, my phone would crash everytime. I then found out the file I used doesn't work for lollipop so I figured that's what caused the crashes.
My next move was to try and install viper4android. I downloaded it from the Play Store and opened it. It told me it needed an installation of BusyBox so I downloaded that too. But when I opened the BusyBox app and clicked install my phone would crash again. After some searching I found that the HTC One M8 requires BusyBox to be flashed manually so I downloaded the file but when I tried to load it onto my phone I noticed this wasn't possible anymore.
Now when I connect my phone to my PC the PC recognizes it, but when I open the map in Windows Explorer it only shows three maps; .showme, _nero_sync and Ringtones. I know there should be more as they were there before. It also shows my phone's capacity as a total of 10GB (shouldn't this be 16GB?). Also when I try to connect it with Sync Manager it gives me an error everytime I reconnect the phone; Device unavailable. Please reconnect your device [4].
I have tried to reset the phone through settings, wipe with TWRP and fix permissions with TWRP. I also tried reinstalling Sync Manager and the drivers on my PC. What I'm thinking now is I maybe have done something wrong in the ES file explorer that would make the folders unaccessible.
My phone is running stock android 5.0.1 and my PC Windows 7 64-bit.
I hope someone can help me, Thanks.
P.S: Sorry for the long post, I figured I'd give as much info as possible.
@Steef076 First update recovery to the latest one (2.8.6.0)
Second if you go and delete vital or integrated parts of the stock rom you will get a lot of bugs. Third, viper4android requires to write system and you can't write system with the stock kernel, you need an unsecured kernel or unsecure it yourself.
10GB is right since 6 is eaten by android. At this point I would just revert to a backup or install any custom rom around here. Most are close to stock and with no bloatware and come with root. You can even clean them further using a tool called ROM Cleaner. It will most likely solve all your problems
Did the deleted system apps reappear after reboot, or do they remain "uninstalled"? If the system is write protected like TempestZ states, any deleted system apps should reappear after a reboot.
Revert your nandroid to restore the system apps. And you didn't make a nandroid, you really should before making any system modifications for the very reason that it allows you to revert if you run into problems.
Another good practice, is if you don't know what effect deleting a system app will have (such as "safe to delete" lists that can sometimes be found on XDA) you should first freeze the app with Titanium Backup. If freezing doesn't cause any issues, then go ahead and delete. If you do have issues, just unfreeze the app.
Steef076 said:
Now when I connect my phone to my PC the PC recognizes it, but when I open the map in Windows Explorer it only shows three maps; .showme, _nero_sync and Ringtones. I know there should be more as they were there before. It also shows my phone's capacity as a total of 10GB (shouldn't this be 16GB?). Also when I try to connect it with Sync Manager it gives me an error everytime I reconnect the phone; Device unavailable. Please reconnect your device [4].
Click to expand...
Click to collapse
No, Windows will never show 16 GB. It only shows "internal storage" partition, or the user accessible portion of the storage. A good chunk is reserved for the OS.
Does what is shown in Windows differ from what is shown in ES if you browse to internal storage?
Thanks for the replies. @TempestZ @redpoint73
First of all I managed to update twrp to 2.8.6.0 using adb/fastboot.
To answer your question @redpoint73 the system apps I had deleted indeed reappeared after reboot. Also I didn't make a nandroid before I deleted the files, as I did not even know this was possible. Now I have made a nandroid of my stock ROM that is working decently, except for the TV app keeps crashing (I'm not opening it) and the connection to the PC is not working properly (not sure if this is ROM based?). I have noticed when the phone is in recovery I CAN see the folders through windows explorer. HTC sync manager still doesn't find it though. I am working on finding a proper stock ROM or maybe flash a custom one to see if that will fix it.
I understand now that the OS is taking up the storage space. The space windows is showing is the same as ES file manager so I guess this is fine.
HTC Sync is a hot mess. It often causes more troubles than it solves.
One thing you can try (to see if it fixes the USB connectivity) is uninstall HTC Sync and all HTC drivers. Than connect the phone. Don't let it install HTC Sync. Go to Windows Device Manager, find the device. Then pick the option to manually select the drivers, and pick the generic "Android MTP device" (or something to that effect) drivers.
This doesn't work for everyone. But it worked for me to be able to "see" the internal storage of my M8 on my home PC (Win 7). Annoyingly, it seems to vary from one PC to another. My work laptop (also Win 7) works fine with HTC Sync.
Steef076 said:
So if I understand correctly, 'version-main' is the same as 'firmware' and 'software number' (found in settings)? If so, my current firmware seems to be 4.19.114.2.
Now, what you're saying is I should do an OTA but this isn't possible because I have a custom recovery right?
Also, when I want to flash stock rom and stock recovery or do a nand don't I need the files that fit my cidnum? How would your file work for me?
Click to expand...
Click to collapse
If yours already on 4.19.114.2 then no need to do OTA as that the latest.
and my backup will bring back your device back to stock as you first bought it when restore with a full wipe.
Try to solve your problem first, only when you really need the backup then only I will upload ... let me know
ckpv5 said:
If yours already on 4.19.114.2 then no need to do OTA as that the latest.
and my backup will bring back your device back to stock as you first bought it when restore with a full wipe.
Try to solve your problem first, only when you really need the backup then only I will upload ... let me know
Click to expand...
Click to collapse
Hello, sorry for the late reply.
I have decided to give a custom ROM a try. I now have ARHD 41.0 installed and it seems this took care of my problems. All the maps are showing in windows explorer and HTC sync manager is connecting properly with my phone again. Also no more crashing apps. Your backup would still be of much use for me as I am not sure I want to stick with a custom ROM and therefore would like to have a stock ROM backup.
Thanks in advance.
This is my personal experience with CM13 by Ivan meler
It may vary from your own experience but this can
Be very useful for everyone interested in using
Marshmallow on note 2. Am not responsible for any
Outcome whatsoever that may come by applying
Anything stated here on your phone, do it at your own
Risk
Click to expand...
Click to collapse
THE MYTH
YOU HAVE TO WIPE EVERYTHING Including your internal sdcard.
You don't have to wipe your internal sdcard to install Marshmallow CM13
For me, Marshmallow is everything that lollipop should be!
Great credits to XDA, CM and all the developers here who tirelessly
Worked to make lollipop better, in my opinion, I think that
Google gathered most of these fixes and implemented it into
the Marshmallow.
FLASHING MARSHMALLOW CM13
There's a lot of things that could look confusing about
Flashing CM13 but it's not as complicated as many had
Made it look.
THE DO'S AND DON'T
Don't leave your external in the the phone while running CM13 you
Won't like the outcome
Don't attempt dirty flash of CM13 On CM12.1
Don't format only system partition before flashing CM13
HOW TO FLASH CM13
I used Philz touch but TWRP recovery can Still do it. put the CM13 zip in the internal memory
If you're using philz recovery use clean to install new Rom. if you're using TWRP format /system, /data, /cache, /preload
Flash CM13 Zip
Here comes the gapps issues time: make sure that you have any other keyboard apk in your internal phone memory
If you reboot the system now everything will work well without gapps.
there are two different outcomes: if you flash CM13, (don't wipe cache or dalvik) flash gapps (i used open gapps full and slim zero mini) and reboot system
this means you won't be stuck setup wizard but In some cases you may still have AOSP keyboard unfortunately has stopped, disable it and install the keyboard apk you have in your phone memory
If you flash CM13 reboot the system before flashing gapps, you will face setup wizard issue and possibly Aosp keyboard issue whenever you flash gapps.
NEW DEVELOPMENT
Credits to @psndna88 the latest Angi kernel pureCM 4.4.9 (with SELinux permissive)
Makes it possible to use external sdcard and otg in CM13 but don't get so excited!
With Angi kernel 4.4.9 pureCM your external sdcard can be in your phone with
CM13 running perfectly but you can't use your sdcard files as normally as you do before. No app can see the sdcard (gallery and music player inclusive) the only way
You can access sdcard and OTG is via system settings - storage & USB. You can copy
Anything back to the internal memory - that's all you can do!
THE NEW FEATURES
There's no difference in the UI but many interesting changes and modifications in the system
#The multi window cut my attention although we had it in TW but its every welcomed
#Google now on tap is Nice
#Dose mode works but with full (stock) gapps I lost 6% of battery over night
Dose with slim gapps is way better with 2% battery loss over night
#Improvement on WiFi - unlike CM12.1 my WiFi can connect to a new network
While the phone is sleeping
#Dailer improvements - you can copy numbers that you just typed inside dailer
#Audio Fx improvement - combination of Angi kernel and Audio Fx was something Else in Marshmallow, so so sweet,dynamic and powerful.
#System animation, transition and scrolling lot better.
#Google settings now inside system settings
#default root works just fine but if you can't live with the # sign on status bar flash superSU
#App permission is way better - no matter the amount of permission an app requires you can choose to deny all or unnecessary permissions all by yourself.
#Even the android default Easter egg game has improved. I scored 14 on second attempt, never got 3 in lollipop
And many more options.
#I couldn't find System UI tuner in Ivan meler CM13
My Verdict
If you can't live without sdcard, wait for next updates
This is what lollipop should have been
It's a good improvement on lollipop.
The charging slowly that shows on the lock screen is a bug (it shows on both stock CM and Angi kernel) but the charging current is OK and the battery charges rapidly.
Bolumstar said:
THE MYTH
YOU HAVE TO WIPE EVERYTHING Including your internal sdcard.
You don't have to wipe your internal sdcard to install Marshmallow CM13
For me, Marshmallow is everything that lollipop should be!
Great credits to XDA, CM and all the developers here who tirelessly
Worked to make lollipop better, in my opinion, I think that
Google gathered most of these fixes and implemented it into
the Marshmallow.
FLASHING MARSHMALLOW CM13
There's a lot of things that could look confusing about
Flashing CM13 but it's not as complicated as many had
Made it look.
THE DO'S AND DON'T
Don't leave your external in the the phone while running CM13 you
Won't like the outcome
Don't attempt dirty flash of CM13 On CM12.1
Don't format only system partition before flashing CM13
HOW TO FLASH CM13
I used Philz touch but TWRP recovery can Still do it. put the CM13 zip in the internal memory
If you're using philz recovery use clean to install new Rom. if you're using TWRP format /system, /data, /cache, /preload
Flash CM13 Zip
Here comes the gapps issues time: make sure that you have any other keyboard apk in your internal phone memory
If you reboot the system now everything will work well without gapps.
there are two different outcomes: if you flash CM13, (don't wipe cache or dalvik) flash gapps (i used open gapps full and slim zero mini) and reboot system
this means you won't be stuck setup wizard but In some cases you may still have AOSP keyboard unfortunately has stopped, disable it and install the keyboard apk you have in your phone memory
If you flash CM13 reboot the system before flashing gapps, you will face setup wizard issue and possibly Aosp keyboard issue whenever you flash gapps.
NEW DEVELOPMENT
Credits to @psndna88 the latest Angi kernel pureCM 4.4.9 (with SELinux permissive)
Makes it possible to use external sdcard and otg in CM13 but don't get so excited!
With Angi kernel 4.4.9 pureCM your external sdcard can be in your phone with
CM13 running perfectly but you can't use your sdcard files as normally as you do before. No app can see the sdcard (gallery and music player inclusive) the only way
You can access sdcard and OTG is via system settings - storage & USB. You can copy
Anything back to the internal memory - that's all you can do!
THE NEW FEATURES
There's no difference in the UI but many interesting changes and modifications in the system
#The multi window cut my attention although we had it in TW but its every welcomed
#Google now on tap is Nice
#Dose mode works but with full (stock) gapps I lost 6% of battery over night
Dose with slim gapps is way better with 2% battery loss over night
#Improvement on WiFi - unlike CM12.1 my WiFi can connect to a new network
While the phone is sleeping
#Dailer improvements - you can copy numbers that you just typed inside dailer
#Audio Fx improvement - combination of Angi kernel and Audio Fx was something Else in Marshmallow, so so sweet,dynamic and powerful.
#System animation, transition and scrolling lot better.
#Google settings now inside system settings
#default root works just fine but if you can't live with the # sign on status bar flash superSU
#App permission is way better - no matter the amount of permission an app requires you can choose to deny all or unnecessary permissions all by yourself.
#Even the android default Easter egg game has improved. I scored 14 on second attempt, never got 3 in lollipop
And many more options.
#I couldn't find System UI tuner in Ivan meler CM13
My Verdict
If you can't live without sdcard, wait for next updates
This is what lollipop should have been
It's a good improvement on lollipop.
Click to expand...
Click to collapse
spen included or not?
muzliamir92 said:
spen included or not?
Click to expand...
Click to collapse
Not Included
Okey..thanks
Thanks
Thanks
---------- Post added at 09:59 AM ---------- Previous post was at 09:55 AM ----------
Installed Ivan_meler cm13 with stock gapps...everything works except camera app bundle with the ROM..its gives me reboot...callsound quality is very poor..not upto mark.....
---------- Post added at 10:08 AM ---------- Previous post was at 09:59 AM ----------
U r unable to edit contacts like addition of pics.
Playback of videos is some what tricky.
Overall, ROM is smooth & fast, way better from stock ROM.
I wonder that if cm 13 is working so great on note 2 then why Samsung is denied latest update toall note 2 users android 6 ???
@saggi2015 Samsung and most OEM are interested in
Making profit. They want to force you to use not 4 or 5
Even when your note 2 can still serve your well. It was the
Disappointment of note 2 not getting lollipop from
Samsung that moved me to xda. Today am using
Android 6.0.1 but Samsung said we should get stocked in
4.4.2
Am currently using Resurrection Remix marshmallow and it already Rock stable and daily driver on its 1st release. Everything works fine.
Very true... I highly agree with u
How to uninstall stock gapps
---------- Post added at 03:19 PM ---------- Previous post was at 03:00 PM ----------
I wanted to uninstall stock gapps to install Nano or any lighter version of gapps
saggi2015 said:
How to uninstall stock gapps
---------- Post added at 03:19 PM ---------- Previous post was at 03:00 PM ----------
I wanted to uninstall stock gapps to install Nano or any lighter version of gapps
Click to expand...
Click to collapse
Most time you don't uninstall gapps. The bug free
Way is to wipe cache, wipe dalvik cache, format
/system partition flash the ROM again and flash the
New gapps you want to use.
Full gapps consumes more battery
I'll recommend slim mini gapps. Abt 172mb and it
Has Google now on tap
Thanks
have you tried DMD Panorama app with this rom? it`s not working...and not only this one app, but most of pano apps are not working, on any custom rom...only on stock 4.4.2 is working ok....it`s a very anoying bug
lulzcart said:
have you tried DMD Panorama app with this rom? it`s not working...and not only this one app, but most of pano apps are not working, on any custom rom...only on stock 4.4.2 is working ok....it`s a very anoying bug
Click to expand...
Click to collapse
There are many apps that are not Marshmallow ready.
The new permission system in Marshmallow requires
Devs to update their apps to work better.
Alternatively, you can clear app cache and/or data
And give it permissions manually. If it doesn't work,
Take a logcat and the rom Dev or any other member
Can help you out....
Bolumstar said:
There are many apps that are not Marshmallow ready.
The new permission system in Marshmallow requires
Devs to update their apps to work better.
Alternatively, you can clear app cache and/or data
And give it permissions manually. If it doesn't work,
Take a logcat and the rom Dev or any other member
Can help you out....
Click to expand...
Click to collapse
nothing will work to make this app and most panorama app to work...not even on CM 12.1, or any other custom rom....on the stock rom it works perfectly
I flashed Marshmallow on N7105 yesterday (the unofficial version) and I can't recognize any problems with leaving external in while flashing or any problems afterwards.
I did the cm 13
but when i came to flash gapps i stuck here,i am using twrp and the message appear was mds not match,aborting zip install, the gapps file which i download was ARM 6.0 SUPER
alkwaga said:
I did the cm 13
but when i came to flash gapps i stuck here,i am using twrp and the message appear was mds not match,aborting zip install, the gapps file which i download was ARM 6.0 SUPER
Click to expand...
Click to collapse
First, md5 is used to check if the file is correctly copied
Or downloaded. In very rare cases it might be wrong while
The file is ok.
Try flashing the gapps zip again but this time uncheck the
md5 checksum in TWRP recovery. If it fails then the zip
Files is corrupt.
Try re-downloading the the gapps zip file. I will
Recommend slim mini gapps or open gapps mini
Bolumstar said:
THE MYTH
YOU HAVE TO WIPE EVERYTHING Including your internal sdcard.
You don't have to wipe your internal sdcard to install Marshmallow CM13
For me, Marshmallow is everything that lollipop should be!
Great credits to XDA, CM and all the developers here who tirelessly
Worked to make lollipop better, in my opinion, I think that
Google gathered most of these fixes and implemented it into
the Marshmallow.
FLASHING MARSHMALLOW CM13
There's a lot of things that could look confusing about
Flashing CM13 but it's not as complicated as many had
Made it look.
THE DO'S AND DON'T
Don't leave your external in the the phone while running CM13 you
Won't like the outcome
Don't attempt dirty flash of CM13 On CM12.1
Don't format only system partition before flashing CM13
HOW TO FLASH CM13
I used Philz touch but TWRP recovery can Still do it. put the CM13 zip in the internal memory
If you're using philz recovery use clean to install new Rom. if you're using TWRP format /system, /data, /cache, /preload
Flash CM13 Zip
Here comes the gapps issues time: make sure that you have any other keyboard apk in your internal phone memory
If you reboot the system now everything will work well without gapps.
there are two different outcomes: if you flash CM13, (don't wipe cache or dalvik) flash gapps (i used open gapps full and slim zero mini) and reboot system
this means you won't be stuck setup wizard but In some cases you may still have AOSP keyboard unfortunately has stopped, disable it and install the keyboard apk you have in your phone memory
If you flash CM13 reboot the system before flashing gapps, you will face setup wizard issue and possibly Aosp keyboard issue whenever you flash gapps.
NEW DEVELOPMENT
Credits to @psndna88 the latest Angi kernel pureCM 4.4.9 (with SELinux permissive)
Makes it possible to use external sdcard and otg in CM13 but don't get so excited!
With Angi kernel 4.4.9 pureCM your external sdcard can be in your phone with
CM13 running perfectly but you can't use your sdcard files as normally as you do before. No app can see the sdcard (gallery and music player inclusive) the only way
You can access sdcard and OTG is via system settings - storage & USB. You can copy
Anything back to the internal memory - that's all you can do!
THE NEW FEATURES
There's no difference in the UI but many interesting changes and modifications in the system
#The multi window cut my attention although we had it in TW but its every welcomed
#Google now on tap is Nice
#Dose mode works but with full (stock) gapps I lost 6% of battery over night
Dose with slim gapps is way better with 2% battery loss over night
#Improvement on WiFi - unlike CM12.1 my WiFi can connect to a new network
While the phone is sleeping
#Dailer improvements - you can copy numbers that you just typed inside dailer
#Audio Fx improvement - combination of Angi kernel and Audio Fx was something Else in Marshmallow, so so sweet,dynamic and powerful.
#System animation, transition and scrolling lot better.
#Google settings now inside system settings
#default root works just fine but if you can't live with the # sign on status bar flash superSU
#App permission is way better - no matter the amount of permission an app requires you can choose to deny all or unnecessary permissions all by yourself.
#Even the android default Easter egg game has improved. I scored 14 on second attempt, never got 3 in lollipop
And many more options.
#I couldn't find System UI tuner in Ivan meler CM13
My Verdict
If you can't live without sdcard, wait for next updates
This is what lollipop should have been
It's a good improvement on lollipop.
Click to expand...
Click to collapse
I can't install custom recovery in my note 2 n7100. Returned with nand write start error with odin always in many versions and error 12 with heimdall.
Please help me with this issue. Thanks.
How can I download cm13 for note 2?
Please give me a download link...
Sent from my SM-N9005 using Tapatalk
My phone was kinda laggy and I had audio problems during calls while I was on CM 12, so I decided to switch to AOSP 6.0.5.1 ROM. I installed it on the phone and decided to format my SD card afterward. It appeared I had forgotten to install Gapps and after the SD formatting this task came near to impossible. I tried downloading them from the basic browser of the phone, but whenever I start downloading any stuff from the basic browser it crashes and prevents any downloads. I tried transferring them with USB but after this whole thing, my Phone folder on the PC explorer appears to be blank. I finally managed to send the gapps .zip file via Bluetooth but when I tried installing them in Recovery (Touch Philz Recovery) it gave me a Status 6 error. I tried sending the google play .apk file via Bluetooth but it could not be sent for whatever reason. The only alternative that comes to my mind right now is sending another ROM via Bluetooth with gapps set and installing it. Any ideas on how to get the gapps running? Thanks in advance.
P.S. I don't know if that is because of the lack of gapps installed but I tried installing any .apk file from another micro SD card and a message appears that these files (.apk) can't be opened.
Why don't you just reflash the ROM and Gapps in one go?
BTW, did you root the rom? Enable Dev Option? Enable install unknown source? Its AOSP 6.0.1 I believe?
I take no credit for this amazing equalizer. All credits go to @zhuhang and the people from his thread for the convolvers.
If you don't know what V4A is check here for more details.
But basically it's an audiophiles dream that can cause serious hearing loss and such audio enjoyment at the same time!
The Zip has all the files included to enable "neon" support for convolvers, which are also included.
The feedback I've received so far is 100% success.
INSTRUCTIONS:
1) DOWNLOAD THE ZIP
2) FLASH IN RECOVERY (no need to uninstall if you already have viper installed)
3) open the app and you will be prompted to install the drivers. (I always choose the top one, although it does consume more batter, we'll worth it)
The EQ can be either super simple with just the basic adjustments or can get really technical in "expert" mode.
To activate the convolvers hit the 3 dots in the top right and click click the "ui settings" and change it to expert
Current version Download and discussion starts here
UPDATE VERSION 2.4.0.1 Neon Enabled + Convolvers
If using my previous zip version a simple flash of the new zip will update your V4A.
If you are running any version other than the one in my previous zip you will need to follow the steps below to ensure a smooth update to 2.4.0.1.
1) uninstall current driver from Viper by selecting the option is the app or use file manager and delete "libv4a_fx_ics.so" from system/lib/soundfx.
2) wipe data app with application manager or TiBackup
3) uninstall your current V4A
4) Flash to new zip
5) boot up and enjoy
6) hit the thanks button.
old version
Viper4Android neon enabled including convolvers
Enjoy!
Not working for me on MM rom. Says "Conflicted" in status.
Gonna try method from the old thread as it worked for me before.
Thanks for the effort anyway ?
Sent from the godlike G925F ^^
Work on my G925F 5.1.1
Not working, keeps saying unsupported, I disabled the driver wiped the data and uninstalled then flashed the zip
Sent from my SM-G925F
Working perfectly on my 925F - thanks man!!
Hello everyone, I have followed all the instructions but the only difference is that I downloaded and installed manually com.vipercn.viper4android_v2_2.4.0.1_HiAppHere_com.apk file. Then for the rest all went to fruition right away. Thanks stangdriver44 for the support.
Hi everyone, do I need to change the SE for android into permissive mode?
Working perfect on crisscross 6.0.1 v1.3 ael 1.4
kmw03062 said:
Hi everyone, do I need to change the SE for android into permissive mode?
Click to expand...
Click to collapse
Yep. I guess this is what was wrong when I tried to install it.
OP doesn't state it clearly enough tho.
angelus0w said:
Working perfect on crisscross 6.0.1 v1.3 ael 1.4
Click to expand...
Click to collapse
Working ?
Installed and work but nothing is neon. What did i am wrong? Viper wasnt installed anytime before. Please help
Gesendet von meinem SM-G925F mit Tapatalk
work on G925K 6.0.1?
It says kernel folder is empty but all the impulse is in kernel folder. Is there anything i missed.
Sent from my SM-G925F using Tapatalk
Doesn't work for me either on the lg g4 h811 mm
Sent from my LG-H811 using Tapatalk
Working perfectly on 6.0.1 (G925FXXU3DPAD) - good stuff!
thank you
jakir01 said:
It says kernel folder is empty but all the impulse is in kernel folder. Is there anything i missed.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
+1
To fix the empty directory error (which has happened to me on G925FXXU3DPAD), simply copy all the convolver .irs and .wav files from whereever you see them to /data/media/legacy/ViPER4Android/Kernel/ with a root browser, and you will notice the directory is indeed empty if it exists at all (at least it was in my case). I believe that with the MM changes to how the internal SD is mounted (again), V4A's old location check fails, sorta.
Hope this helps!
doomperfect said:
To fix the empty directory error (which has happened to me on G925FXXU3DPAD), simply copy all the convolver .irs and .wav files from whereever you see them to /data/media/legacy/ViPER4Android/Kernel/ with a root browser, and you will notice the directory is indeed empty if it exists at all (at least it was in my case). I believe that with the MM changes to how the internal SD is mounted (again), V4A's old location check fails, sorta.
Hope this helps!
Click to expand...
Click to collapse
Wow, thanks a lot.... Now working.
doomperfect said:
To fix the empty directory error (which has happened to me on G925FXXU3DPAD), simply copy all the convolver .irs and .wav files from whereever you see them to /data/media/legacy/ViPER4Android/Kernel/ with a root browser, and you will notice the directory is indeed empty if it exists at all (at least it was in my case). I believe that with the MM changes to how the internal SD is mounted (again), V4A's old location check fails, sorta.
Hope this helps!
Click to expand...
Click to collapse
Thanks man
Hi, I've flashed my US Le 1 Pro first with Beta Hydri v4 but because I had the malware stock US rom it came with the phone. In the stock rom Hifi and that changing display didn't worked but i didn´t really care but everything else did , like gyroscope and compass (and very well) but since i've flashed to Beta Hydri v4 with full wipe, some axis are inverted, I think X in accelerometer is outputing negative values instead of positive.
I've trying flash other roms (like cuocu92 14s and the original stock I had from my backup) but didn´t worked. I'm so sad because I've just bought 2 days ago the bobovr z4 so i could use it for vr.... :'(
Can someone help me?
I noticed this problem when I tried to use Google Camera for (360° spherical panoramas) very frustrating.
At this moment one solution is use other phone to VR.
simondd said:
At this moment one solution is use other phone to VR.
Click to expand...
Click to collapse
It works with original rom but you have to wipe everything except your sdcard.
At least for me now working perfectly.
I am having the same issue. My phone is rooted. I am surprised there are no apps or anything that can invert the VR for us.
CM 12.1
dreamwalkerfx said:
I am having the same issue. My phone is rooted. I am surprised there are no apps or anything that can invert the VR for us.
CM 12.1
Click to expand...
Click to collapse
Thanks to @BetaHydri, he fixed this issue in the CM12.1 V4.2
Additional Infos about how to fix
Thanks very much for the quick reply!
I flashed to 4.2b using TWRP and then installed the gapps, I really did not want to format my device.
4.2b fixed my GPS issue thank God, but the VR is still inverted.
Went into TWRP file manager using recovery, and tried to move the new .conf file from the 4.2b zip to the /sensors/etc folder.
This didn't seem to help at all. There is still nothing in the /persist folder.
Any ideas would be appreciated.
Cheers
dreamwalkerfx said:
Thanks very much for the quick reply!
I flashed to 4.2b using TWRP and then installed the gapps, I really did not want to format my device.
4.2b fixed my GPS issue thank God, but the VR is still inverted.
Went into TWRP file manager using recovery, and tried to move the new .conf file from the 4.2b zip to the /sensors/etc folder.
This didn't seem to help at all. There is still nothing in the /persist folder.
Any ideas would be appreciated.
Cheers
Click to expand...
Click to collapse
First time I flashed the V4.2, I came from the Stock Rom, it didn't fix the Gyro problem, but as I remember you should delete/rename these files first (sensor_def_qcomdev.conf - sensors_settings - sns.reg) then in TWRP do a factory rest and wipe Dalvik + Cache.
Reflash the Rom again.
Thanks for the quick response.
Unfortunately with the lack of time I can't look at factory reset... it would take me forever to re-load all apps, docs, pictures, etc.
I am wondering if there's a manual way to do this through TWRP -- ie. copying the correct sensor files into their respective folders, clearing cache, and seeing if that works.. right now my /persist folder is empty
If anybody has a chance that has a working gyro, I'd love a copy of their sensors folders both in persist and system.
dreamwalkerfx said:
Thanks for the quick response.
Unfortunately with the lack of time I can't look at factory reset... it would take me forever to re-load all apps, docs, pictures, etc.
I am wondering if there's a manual way to do this through TWRP -- ie. copying the correct sensor files into their respective folders, clearing cache, and seeing if that works.. right now my /persist folder is empty
If anybody has a chance that has a working gyro, I'd love a copy of their sensors folders both in persist and system.
Click to expand...
Click to collapse
The factory reset doesn't wipe your internal storage, only the apps installed and settings will be restored to default.
Anyways, if tomorrow I get free time I will upload the files needed for you.
Does your GPs lock on OK?
May need to reflash, no idea what I did wrong but the GPS does not work. Bounces around the map every few minutes.
I can confirm, I reflashed today -exactly- as instructed on the instructions in the 4.2b thread, re-installed all apps, etc etc.. an hour process at least..
The gyroscope is still inverted,
After dalvik + cache cleanup in TWRP and after boot you should have in /persist/sensors folder three files:
1. error_log
2. sensors_settings
3. sns.reg (this has now all new settings in an encrypred format from the sensor_def_qcomdev.conf file)
And on /system/etc/sensors only that above mentioned clear text sensor_def_qcomdev.conf file.
Click to expand...
Click to collapse
and there is still -nothing- in the /persist folder...
I have the one file in /system/etc/sensors, but I don't have it in /persist.
I'm ready to throw this phone out the window
---------- Post added at 06:22 PM ---------- Previous post was at 05:36 PM ----------
My bad, there are the 3 files in the persist folder (had to activate root explorer in ES).
No idea why it's not working.
For the GPS, I have no idea because I don't use it at all. Go to CM 12.1 BetaHydri thread
I attached a Zip file contain all files with their respective directories as shown below.
Code:
system/etc/sensors/sensor_def_qcomdev.conf
etc/sensors/sensor_def_qcomdev.conf
persist/sensors/error_log
persist/sensors/sensors_settings
persist/sensors/sns.reg
Good luck.
nsmsdz, you are the man.
After replacing all the files/overwriting, and a reboot, it works fantastic.
May the Android Gods be with you always.
help
Hello.
I lama, I need help. He tried more ROM, still the same problem. I do not know if this one problem, I do not know how to delete and replace files. The phone ROOT files, but I can not see. Thank you very much for your help.
Sorry for the English, translated into translator.
Newbie can not embed the video, this is the only way
video:
youtu.be/YDJmj_dM8CY