How to enable 2100 Mhz band in LG G3 D851? - T-Mobile LG G3

I have a D851 g3.I am trying to unlock 2100 Mhz frequency for my phone as it does not connect to 3g networks.My phone was running in fulmics rom5.3(MM) with stock kernal and using win 8.1 lap.
I reflashed stock KK as cant put phone in diag mode in fulmics rom.Now phone is detected in com ports and I can connect usb in diag mode(debugging enabled).I used QSPT to read rv nv values.Phone detecting in rv mnager, edited lines 00946 and 00441 but cant save these values.These values were returning to original values .But i can edit and save values for 01877 and 02954.
Another interesting fact is that when i press read from phone,it showing all my gsm/wcdma bands were activated (all checked in the list).But still it is not connecting to 2100 mhz band which is the 3g band here.Is it locked by T Mobile ?
I tried to edit values using QXDM but same results .
Plz advice me.

Related

Enable AWS band (3g/4g Tmobile) on ATT Note 2 stock baseband

Method 1:
Easiest method to enable AWS and DC HSPA (42Mbps) is to restore the attached qcn backup on ATT note 2. Use software download tool in QPST to restore the attached qcn file.
Restoring qcn will not change your imei, so be worry free and restore Thanks to TEKHD for sharing the T889 qcn backup.
If you face issues with data rate and stability, restore your device original qcn on top and change the value of 01877 to 115868544 in NV browser of QXDM or use 80 03 E8 06 in the text file and write it to device. DC HSPA or 42 Mbps will be disabled after this
Thanks to Arrio for helping me remove imei from qcn file. I have attached my note 2 qcn backup.
Now it should be piece of cake for all
How to posted by Joogle
1. Download and Install QPST, version 2.7 build 374 or higher
2. Go to hidden menu on phone, dial *#7284#
3. Once in Menu choose the option for USBSettingsMenu, then choose the option RNDIS+DM+MODEM.
4. Hook up the phone to the PC via USB at this time if you haven't already. This option works on STOCK TOUCHWIZ.
5. Go to your PC Control Panel. We need to get into the Device Manager to determine where your phone is being recognized as far as the COM ports. For this, go to System -> Device Manager (on the left) or System -> Hardware -> Device Manager (depends on your Control Panel setup). Anyways, scroll down to Ports (may say Ports & LTP, Serial, depends on version). Anyways, find your phone under it, and take note of the COM# (mine was COM9, yours can and probably will vary). If you have exclamation marks anywhere then install the Samsung drivers and try again.
6. Now go to Start Menu -> All Programs -> QPST -> QPST Configuration
7. Click on the Ports tab. Click on Add New Port, then add your Port# where it says Port and name it something you can remember. Hit OK.
8. Now click on Start Clients -> Software Download. Click on the Backup tab. Make sure your phone is listed under Port. If its not, hit Browse, choose the COM that is your phone, and hit OK. Now where it says QCN File, hit Browse, find a safe spot to store your backup on your PC, and name it. Hit OK. Now hit Start. Make sure backup gets to 100% with no errors.
9. Go back into QPST. Go to Start Clients -> Software Download. Click on the Restore tab. Make sure your phone is listed under Port. If not, browse to the appropriate COM port.
10. Choose the QCN backup in the first post of this thread. Click Start, let it finish. Phone should reboot. If it fails rebooting, just do a manual reboot. First boot will take a bit, let it do its thing.
Messing with NV parameters can brick your device.
sjravi said:
Once the NV's are enabled, it cannot be disabled so be careful.
Click to expand...
Click to collapse
Does that mean if we enable NV's (which basically enables AWS), we wont be able to disable AWS and go back to At&t GSM or ? Or once we enable NV we can use both at&t and T-Mobile Sims?
Also have you tested this method with T-Mobile SIM? High data speed, low data speed?
I would love to be able to use my Note with AWS band network (Wind mobile in Canada), but instructions are way beyond my understanding :laugh:. Will wait for easier instructions if they get posted.
Thanks for your work.
ruinkhan said:
Does that mean if we enable NV's (which basically enables AWS), we wont be able to disable AWS and go back to At&t GSM or ? Or once we enable NV we can use both at&t and T-Mobile Sims?
Also have you tested this method with T-Mobile SIM? High data speed, low data speed?
I would love to be able to use my Note with AWS band network (Wind mobile in Canada), but instructions are way beyond my understanding :laugh:. Will wait for easier instructions if they get posted.
Thanks for your work.
Click to expand...
Click to collapse
That's as easy as it gets, and yes it will unlock those bands permanently along side the AT&T bands.
Follow up Qs
1) Thank you so much for posting how to do this.
2) Yeah, I second ruinkhan; Do you know if AWS is still 21mbps or 42mbps like the T889?
3) Is enabling AWS on the N7100 or N7105 possible? How about on CDMA models with SIM slots and GSM support unlocked (such as Verizon i605 or US Cellular R950)?
ruinkhan said:
Does that mean if we enable NV's (which basically enables AWS), we wont be able to disable AWS and go back to At&t GSM or ? Or once we enable NV we can use both at&t and T-Mobile Sims?
Also have you tested this method with T-Mobile SIM? High data speed, low data speed?
I would love to be able to use my Note with AWS band network (Wind mobile in Canada), but instructions are way beyond my understanding :laugh:. Will wait for easier instructions if they get posted.
Thanks for your work.
Click to expand...
Click to collapse
Use of AWS can be disabled by changing one of the NV item, but all enabled parameters remain active. This does not cause any problem with the device working. It would work as any stock ATT note 2.
Yes you can use any SIM or network that support these radio bands (UMTS 1,2,4,5 and Quad band GSM)
I am using a T-Mobile sim and I do get around 8 Mbps download speed and 3 to 4 Mbps upload.
Ya I agree the instruction are bit complicated
cephasara said:
1) Thank you so much for posting how to do this.
2) Yeah, I second ruinkhan; Do you know if AWS is still 21mbps or 42mbps like the T889?
3) Is enabling AWS on the N7100 or N7105 possible? How about on CDMA models with SIM slots and GSM support unlocked (such as Verizon i605 or US Cellular R950)?
Click to expand...
Click to collapse
I am working on 42 Mbps, with the posted NV backup, even 42 Mbps NV items are included. My note 2 does inform network about 42 Mbps support when enabled but I dont see any change in download speed. I guess the network does not like something.
Yes it should be possible on N7100 or N7105, as all have the same Qualcomm 9215 baseband chip. But I am not sure if they have the right RF related hardware.
the instructions for nv backup says to select rmnet+dm+modem. i do not see that option in there. are you suppose to choose a different option for the note 2? any issues of doing this on a canadian i317m?
thanks
cbqfly said:
the instructions for nv backup says to select rmnet+dm+modem. i do not see that option in there. are you suppose to choose a different option for the note 2? any issues of doing this on a canadian i317m?
thanks
Click to expand...
Click to collapse
On my ATT Note 2 I can see that option, what options do you see?
I will do this tonight with my I317, can anyone post a more clear set of instructions? I already have the T-Mobile ROM posted on the AT&T dev section as well as the AT&T ROM on T-Mobile's dev section... This is a huge discovery... I mean huge... Please, anyone care to elaborate on this... Better instructions... I have both the T889 and the I317... And I will test this as soon as there is a better guide... Thank you
Sent from my SGH-T889 using XDA Premium HD app
sjravi said:
On my ATT Note 2 I can see that option, what options do you see?
Click to expand...
Click to collapse
the options i see are
mtp
mto+adb
ptp
ptp+adb
rndis+dm+modem
dm+modem+adb
just found out i can select any mode with DM
thanx
TEKHD said:
I will do this tonight with my I317, can anyone post a more clear set of instructions? I already have the T-Mobile ROM posted on the AT&T dev section as well as the AT&T ROM on T-Mobile's dev section... This is a huge discovery... I mean huge... Please, anyone care to elaborate on this... Better instructions... I have both the T889 and the I317... And I will test this as soon as there is a better guide... Thank you
Sent from my SGH-T889 using XDA Premium HD app
Click to expand...
Click to collapse
Indeed this a huge plus for our At&t Note. I wasnt expecting this to be done this early, but the man did it. My hands are now itching to try this and save $50 a month by switching to AWS network. I would really love to see easier instructions [not all of us hackers ]
cbqfly said:
the options i see are
mtp
mto+adb
ptp
ptp+adb
rndis+dm+modem
dm+modem+adb
just found out i can select any mode with DM
thanx
Click to expand...
Click to collapse
select rndis+dm+modem, sorry but that is the option on my ATT note 2 also
Yes you can select any mode with DM (Diag mode) which enables the diagnostic port to the baseband.
What is the use of this? I dont get it yet lol. Btw i seem when my note display 3g the internet dosnt work i need wait seconds to display h or h+ and then works. Is that normal?
Sent from my SGH-I317 using xda app-developers app
Okay I got home... any good instructions yet? ready to do this...
Bestplayer55 said:
What is the use of this? I dont get it yet lol. Btw i seem when my note display 3g the internet dosnt work i need wait seconds to display h or h+ and then works. Is that normal?
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It allows people that have At&t Note 2 to use their device with T-Mobile's 1700 frequency band (or 2100 if there is).
In Canada its a big big plus as it allows people like me to be:
1.Free from 3 year contract
2.Have a GSM phone that can be used with AWS network as well.
3.Get a $40 Unlimited Voice/Text/Unlimited Data (10 data cap lol) plan. Of course No LTE or 42mbps speeds.
sjravi, perhaps these NV backups would be of interest for comparison purposes. I got these in the course of trying to flash back the stock modem on my T889V, which it currently bootloops with.
My phone is currently stuck with the I317M modem, has 850, 1900 and AWS HSPA in addition to LTE. Barring any inaccuracies in the Ookla Speedtest app, it also has DC-HSPA. (The phone clocked at 26 Mbps on HSPA during one of my tests.)
There's a stock T-Mobile T889, stock Videotron T889V and my post-repair, I317M modem-running T889V backup in there.
is there list? as in what lines to change?
sjravi said:
Things needed:
1> NV back up tool from this post: http://forum.xda-developers.com/showthread.php?t=1804117
2> NV backup from my note 2 attached in this post (without IMEI: nv item 550)
3> NV backup of your device
Its also good to take NV backup using QPST tool before changing anything on the device.
First take a NV backup of your device using the tool mentioned above. NV parameters from 0 to 7225 are needed.
Compare NV param file in this post with your device's to find the needed NV parameters for AWS.( I do not have original NV backup of my device else I would have posted the list. If someone is interested to make a list, it can be added to the post.)
Before restoring nv backup, the AWS NV parameters should to be enabled/B]
The additional NV's that are needed, to enable AWS band are disable/not present and the nv tool does not write these even if the restore file has them. This is what I noticed when I tried to restore. So had to enable all the required parameters using NV browser in QXDM.
Once the NV's are enabled, it cannot be disabled so be careful.
To enable just select the NV item and click write in NV browser and this has to be done for all the needed nv parameters.
Does anybody know a work around to avoid this manual work?
Once all the parameters are enabled the NV file in this post can be restored on to your device to enable AWS.
Messing with NV parameters can brick your device.
Click to expand...
Click to collapse
Okay, From this point on... I am lost...
"So had to enable all the required parameters using NV browser in QXDM"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TEKHD said:
Okay, From this point on... I am lost...
"So had to enable all the required parameters using NV browser in QXDM"
Click to expand...
Click to collapse
NV manager is very old tool and not supported by note 2, so you cannot use it.
Use NV browser in QXDM (last version found online 3.12.724), which you can google to get it.
Once you have installed it. Run QXDM professional
Go to Options > Communications: Here you should see 2 ports for the phone one is modem port and the other diagnostic port.
Select diagnostic port. Check out the attached screenshots
After you have the NV browser open. Select the NV item that needs to be enabled and click "write" this will write the value "0". Hope this helps.
sjravi said:
NV manager is very old tool and not supported by note 2, so you cannot use it.
Use NV browser in QXDM (last version found online 3.12.724), which you can google to get it.
Once you have installed it. Run QXDM professional
Go to Options > Communications: Here you should see 2 ports for the phone one is modem port and the other diagnostic port.
Select diagnostic port. Check out the attached screenshots
After you have the NV browser open. Select the NV item that needs to be enabled and click "write" this will write the value "0". Hope this helps.
Click to expand...
Click to collapse
Man, don't make us suffer... post the tool and the whatever that needs to be enabled... lol
EDIT... got the tool... Attaching it here...
EDIT AGAIN... no, is not working on windows 7/8 ... is for xp... damn... any version for windows 7 or windows 8?
XP Version here:
http://tekhd.com/downloads/QXDM_3.12.714_winxp.rar
When installing it says requires Internet Explorer 6 or higher... lol...I have version 10
let me see if I can bypass that message... by extracting .msi file via command promp...
-> Update... Extracted the damn .msi... but the exe files don't run... So... I have to install XP now?
-> Update 2... got it running in compatibility XP mode... see picture... now what? lol
-> Select the NV item that needs to be enabled and click "write" this will write the value "0" ??????????????????????????????????????????

[Q] LU6200 - GPRS only, No EDGE/2G Mode

sorry if i posted this in the wrong section
i have LU6200 with sphinx v2 rom
3G is working fine, the problem is when i am indoor i can't get 3G signal so i turn 2G only on
but the signal is G not 2G or E. Which mean it is GPRS signal and it is very slow.
Is there any way so my device got EDGE/2G so when i'm indoor i still get some reliable connection than GPRS??
thanks.
deatheaterz said:
sorry if i posted this in the wrong section
i have LU6200 with sphinx v2 rom
3G is working fine, the problem is when i am indoor i can't get 3G signal so i turn 2G only on
but the signal is G not 2G or E. Which mean it is GPRS signal and it is very slow.
Is there any way so my device got EDGE/2G so when i'm indoor i still get some reliable connection than GPRS??
thanks.
Click to expand...
Click to collapse
I DONT TAKE NO RESPONSIBILITY IF YOU BRICK YOUR DEVICE.
BACK UP YOUR NV-RAM AND ANYTHING ELSE BEFORE YOU CHANGE ANYTHING.
You have to change the NV item id 2508. (you should have the value 00 which must be changed to 01)
The NV-ITEMS 2509 - 2511 should be also checked. But in my case they were set correctly.
I would use the EFS Explorer from QPST. (Have done it for a L-01D the japanese variant of the p930)
You have to enable DIAG mode on your phone with a script like in http://pastebin.com/rGE7rwSc
to able to connect your phone in QPST.
xRising_Sunx said:
I DONT TAKE NO RESPONSIBILITY IF YOU BRICK YOUR DEVICE.
BACK UP YOUR NV-RAM AND ANYTHING ELSE BEFORE YOU CHANGE ANYTHING.
You have to change the NV item id 2508. (you should have the value 00 which must be changed to 01)
The NV-ITEMS 2509 - 2511 should be also checked. But in my case they were set correctly.
I would use the EFS Explorer from QPST. (Have it done for a L-01d the japanese variant of the p930)
You have to enable DIAG mode on your phone with a script like in http://pastebin.com/rGE7rwSc
to able to connect your phone in QPST.
Click to expand...
Click to collapse
So L-01d also doesn't have EDGE before you do this trick? and it is you are able to enable the EDGE?
thanks btw, i'll try it latter.
---
i've tried
now i'am confused in the EFS Explorer
would you please make the step by step from EFS Eplorer and the QPST configuration, i have 2 diagnostic port, the one is MSM9600 and MSM8660 which one should i connect to the EFS Explorer
thanks

[Tutorial] Unlock ALL bands on xt907 (moto_msm8960)

**This is risky! Dangerous stuff : I am not responsible for any damage to your device *
Thanks to @olokos & @BlackSoulxxx for idea
@samwathegreat for drivers
@bpear96 for his post
0- First Download these
http://d-h.st/0Me
https://docs.google.com/file/d/0B5ePoKNP9UFtZEZEd0swNFRTNG8/edit?pli=1
Extract it and install QPST from that zip
Boot your Moto into bootloader by powering off, then hold Vol+ and Vol- while you power on
Select BP Tools by pressing volume down, then press volume up when hovering over BP Tools
Phone will reboot in diag mode (Nothing will look different in phones UI)
Make sure USB debugging is OFF
Go to device manager and make sure Motorola QC Diag is installed. If not go here http://forum.xda-developers.com/show...76&postcount=3
Find "COM*" in my case it was "COM100". It might be different for you.
Press start button and navigate to QPST -> QPST Configuration.
In QPST Configuration click on "Add new port" and in "Port" type in your "COM*". In my case It's "COM100" in there.
Navigate to QPST/bin and open RF_NV_Manager.exe *(C:\Program Files (x86)\Qualcomm\QPST\bin)
press on settings -> Comport and choose your COM port.
Press on file -> read from phone
Wait patiently until it is finished. Now pay attention!
Go to line 1877, click it and copy the decimal number on the right side of a programme. right click - copy
Go to the place where you extracted the zip and start mzTool
On the left side you will see "Input radix" - press decimal there.
On the right side you will see "RF BC CONFIG" paste your previously copied number from the RF_NV_Manager.exe there.
You will see now what bands are you able to use on the bottom of the app in "Bit information"
Switch tab to "Band Preference (NV Value)"
In there select all GSM bands and WCDMA bands you want to unlock but Make sure to check your original bands before you add more!
After you're done choosing what bands do you want - copy decimal number from the bottom right
Remove all commas from that number ( "," ) so it would be just a bunch of numbers without anything else.
Open RV_NV_Manager.exe from the point you left it and paste your new number without commas "," there.
Press on write NV and then press on file ->write changed NV to the phone.
Reboot the phone you are Done
i successfully added WCDMA Band III - EUROPE & CHINA DCS 1800 band
umar_fiaz said:
i successfully added WCDMA Band III - EUROPE & CHINA DCS 1800 band
Click to expand...
Click to collapse
i'm a bit lost here, it's just unlock GSM & WCDMA bands? not LTE Bands? do you unlock LTE 1800 MHz and 900 MHz frequencies? can you post your phone screenshot after using this mod?
it's work to unlocking WCDMA (tested by me) but still can't figure out how to unlock LTE or maybe it's hardware limitation
'll post LTE method when try Currenty having LTE decimal value 4096 for 700 only
figuring out how to do it http://forum.xda-developers.com/showpost.php?p=56577252&postcount=455
AshRoller said:
i'm a bit lost here, it's just unlock GSM & WCDMA bands? not LTE Bands? do you unlock LTE 1800 MHz and 900 MHz frequencies? can you post your phone screenshot after using this mod?
Click to expand...
Click to collapse
you may try this n post result when i got back 'll check LTE currently where i m no LTE
make sure you have running QPST server
Google for QXDM
Open QXDM, go to Option -> Communication
In Target port, choose your phone com port and press OK
Now in View -> NV Browser
QXDM will open new window, in Category Filter choose LTE
Scroll to id 06828 and click on that, click read then in Input and Value change the value to "1904863"
changed parameter in QXDMA.
Phone still cant find LTE (testes on LTE sim ofc).
My operator uses LTE 2600 MHz (Band 7, B7) and LTE 800 MHz (Band 20, B20)
So sorry Im a total noob to this, but I need to unlock my phone asap, as i was before I had to reflash it due to boot looping issue. Now I cant connect to my Straight talk account/att towers using the SIM card and phone that has always worked for me since I bought it unlocked. Main problem I am having is step 5. "Make sure USB Debugging is OFF" As soon as i turn off the USB debugging the Motorola QC port (COM3 for me) disappears. I left it on so the com port would be active, followed all the steps and still no service. PLEASE HELP and I dont mind paying someone for their assistance if we get my phone working. THANKS!!!
I've tried enabling LTE as described and I'm still testing the results. I need to enable B20 band (800mhz), right now as you know the Razr M may only use the B13 band (700mhz).
That is what I've learned so far:
You'll have to install both QPST (unable to change the LTE bands) and QXDM (able to change the LTE bands, but needs QPST to get installed). Once you have the program installed, reboot the phone in bootloader mode and select BP Tools. Let the phone reboot, then disable USB debugging and connect the phone to the PC. Wait for the device to be installed, if something goes wrong install the driver manually (https://www.youtube.com/watch?v=mm2NKdXdHnc). After this, open QXDM Professional and select the right COM port (the one that's being used by your device) under "options" "communication". Change the "view" field to "NV browser" and "category filter" to "LTE". at this point you could READ the interested fields (06828 and 06829). Calculate the right code to activate the right bands (http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059), change the fields and press WRITE. Power off your phone and reboot: you have chnged the LTE bands.
Now... as said the default value is 4096 (1000000000000 in binary, meaning that the band 13 is the only one usable). In this case the phone may switch from GSM/WCDMA to LTE (settings -> network setting -> preferred network) but clearly is unable to find the network (no signal).
I've changed this parameter to 524288 (10000000000000000000, only B20 band active): the phone works normally but when you select LTE in preferred network the phone doesn' switch and remain in GSM/WCDMA.
Then I've reverted to the initial value (4096): one again everything worked as stated above.
At this point I've tried to activate both the original B13 band and the B20 band, using the parameter 528384: with this setting the phone is able to switch regularly to LTE, but I don't know if the B20 band is active because where I am now there is no LTE signal. I'll try to test the phone during the next days.
Is there a way to check which bands are actually active on the phone (some code, an app, a PC software)?
I've upgraded my sim to a 4G version, then I tried my Razr M in two cities with 4G coverage: no signal. If I put my 4G sim in a Lumia 1020 I can surf on 4G without problem. There's something else we have to change to get the 4G fully working. Maybe examining the modem of a XT905 (Australian version of the Droid Razr M) may give us some clue? The XT905 should be identical in hardware, but uses LTE band 3(1800) and 7(2600) instead of 13(700).
What do you say? Any ideas?
j27h said:
The XT905 should be identical in hardware
Click to expand...
Click to collapse
Unfortunately, no. http://forum.xda-developers.com/showthread.php?p=59365798
Sorry, guys, no new LTE bands with this method.
Sent from my XT1095 using XDA Free mobile app
I unlocked my GSM bands with another method I found on here somewhere. It's a lot easier. If you're using cm12.1 you can use a terminal emulator and type sudo unlock us-gsm and it will preform the NV edit automatically.
Sent from my DROID RAZR M using Tapatalk
Thanks for the mention and keeping my original files! I'll link your thread to mine
I would like to know if someone was successfully able to use band 3 (LTE 1800 Mhz) on an MSM8960 device. I have a Droid Razr HD Maxx (XT926M) and it uses the same 'chipset'. So, this thread is quite relevant to me.
Do you guys think this tutorial will work with moto g 3° generation? If you think so, i will try it in my home as soon as i get there and will post the results.
The processor model is Qualcomm MSM8916 Snapdragon 410 quad core.
Your processor model is Qualcomm MSM8960 Snapdragon S4 Plus
Thanks!
very good
very good
KentianAylomen said:
Do you guys think this tutorial will work with moto g 3° generation? If you think so, i will try it in my home as soon as i get there and will post the results.
The processor model is Qualcomm MSM8916 Snapdragon 410 quad core.
Your processor model is Qualcomm MSM8960 Snapdragon S4 Plus
Thanks!
Click to expand...
Click to collapse
Could you fix it?

Nexus 5X LTE not working

Hello,
i have some problem with my nexus 5Xwith cyanogenmod 13.
Problem was started when i download application Field Test for Nexus 5x/6p
In lte data menu i try change LTE On/Off and change disable and enable band 26 and 41.
From this time all LTE not working. - maybe some parameters was change in modem.
Serveral times i try reflash original rom and CM13 and reflash radio...
I install application QPST and QXDM and in NV browser i have on line : 06828 and 06829 value : 1786875150815
I dont now if this value is correct, but if i try put new value according NV calculator or some numbers from this forum, whitch i found. New values is saved in phone only while i make reboot the phone and LTE still not working.
Backup original NV values i dont have.
Can somebody help me please ?
Thank you
Thank you ...
radimpodzemny said:
Hello,
i have some problem with my nexus 5Xwith cyanogenmod 13.
Problem was started when i download application Field Test for Nexus 5x/6p
In lte data menu i try change LTE On/Off and change disable and enable band 26 and 41.
From this time all LTE not working. - maybe some parameters was change in modem.
Serveral times i try reflash original rom and CM13 and reflash radio...
I install application QPST and QXDM and in NV browser i have on line : 06828 and 06829 value : 1786875150815
I dont now if this value is correct, but if i try put new value according NV calculator or some numbers from this forum, whitch i found. New values is saved in phone only while i make reboot the phone and LTE still not working.
Backup original NV values i dont have.
Can somebody help me please ?
Thank you
Click to expand...
Click to collapse
Just a quick question. Why were you trying to change LTE On/Off in the Engineering Screen? Were you only trying to enable LTE bands or did you have a problem with your data connection? If you were having data problems before downloading the Field Test app, did you know there are some know data issues with CM13. Did you lose your LTE connection?
Also, what gave you the idea to download QPST & QDXM? Do you have prior experience with these applications?
Also, since you have CM13 installed on your 5x, did you try and restore a backup in TWRP that you have saved to see if it corrected your problem?
Which carrier are you with?
Sent from my Nexus 6
Hello,
thank you for your answare, and sorry for my english.
Before problem phone was new and all was worked, but i tryed make some changes, because i searching solution for changng band and editing priority for diferrent LTE band.
Now my problem with no connection on lte is solve, i write zeros to partition modem1 and modem2 from modem filesystem and modem itself after restart phone reset factory setting, but i dont now where modem took IMEI, because i think IMEI is save on this partition...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
But i still dont understed why, after reboot changes on line ID 06828 and ID 06829 comming back originaly number .
Bestest solution for me wold be if i find in NV parameter band priority according signal strenght. Or some application (IN Phone) for disabling and enabling all LTE band without computer.
My most-used bands is : 800,1800,2600Mhz
radimpodzemny said:
Hello,
thank you for your answare, and sorry for my english.
Before problem phone was new and all was worked, but i tryed make some changes, because i searching solution for changng band and editing priority for diferrent LTE band.
Now my problem with no connection on lte is solve, i write zeros to partition modem1 and modem2 from modem filesystem and modem itself after restart phone reset factory setting, but i dont now where modem took IMEI, because i think IMEI is save on this partition...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
But i still dont understed why, after reboot changes on line ID 06828 and ID 06829 comming back originaly number .
Bestest solution for me wold be if i find in NV parameter band priority according signal strenght. Or some application (IN Phone) for disabling and enabling all LTE band without computer.
My most-used bands is : 800,1800,2600Mhz
Click to expand...
Click to collapse
Shortcut Master Lite in the Play Store will allow you to access the LTE Engineering to set band priority. Open the app and click the 3-dot menu In the top right corner. Click on "secret code explorer" and allow the list to populate. You will be looking for a numbered code like "3282” or "33284". Click on each one, select explore from the menu and look thru each selection. The one you will be looking for will say something like Sprint LTE bands editor. You can enable bands 25, 26 & 41 and set band priority. When asked to enter your MSL, enter 000000 and tap verify. You can figure the app out. It takes a little time to get used to how the app works. Good luck and let me know if you need any more help.
P.S. I dont know why you would start changing NV values without any experience using QPST & QDXM. You can make a mistake very easily. Be careful when making changes. I would start fresh by fastboot flashing the factory images, bootloader and radio and start over. Just my opinion.
What carrier are you with and where are you located?
Sent from my Nexus 6 using XDA-Developers mobile app
Why i start Edit without experience ? It is easy, because i need get experience
Band 25,26 And 41 is not important for me.
I need disable and enable and set priority for 800 1800 and 2600mhz, quickly from the phone...
My location is czech republic and switzerland.

Add GSM and LTE bands in Brazil

I've spent 3 days trying to enable GSM and LTE bands in my Swift following this guide from here. But when I try to use the QPST, the software does not recognize my device.
Does anyone knows the secret code to enter in the USB Settings? I've tried a lot of them but without success.
My steps were:
Unlock the OEM - check
Install CyanogemMOD 13 (6.0.1. Marshmallow) - check
Enable Developer Options and enable debugging and Root Access (I couldnt install SuperSU coz I got bootloop twice) - check
Access to USB Settings to change from AP to CP - uncheck
Does anybody knows how to proceed?
I'm from Brazil and I really need to add new bands to get a better signal reception for GSM and the right band for LTE (700Mhz).
Anyone?
I just need the secret code to enable the usb settings.
The problem was my carrier and not the phone.
I've changed the carrier and boom... 4G working nicely.

Categories

Resources