Related
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
a.cid said:
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
Click to expand...
Click to collapse
The Hardware of P8000 is pretty cool, but the Software is "§$§"%§""!$%
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
https://translate.google.at/transla...-p8000-rooten-und-flashen/&edit-text=&act=url
same problem since OTA my phone is bricked and cant unbrick
neonero said:
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
Click to expand...
Click to collapse
THX a lot, I found only the 2 Options to wipe data factory and cache....... dalvink was not displayed in the menue (screenshot attached)
How to uninstall the EL Loader ?
showshow747 said:
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
THX, I will try to flash Eragon, CM 12.1 is still not available, isn't it?
Click to expand...
Click to collapse
No CM 12.1 is not available yet.
In order to uninstall EI Loader, install first root (superSU), then install ccleaner and you can uninstall EI Loader (In system app)
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Zywoon said:
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Click to expand...
Click to collapse
Yes you can use SPFlash tool evenif the phone stucks in the boot screen. Simply switch the phone off, start SPFlash tool and then connect the phone to usb.
If you follow the instructions from elephone, then your phone should working again: http://bbs.elephone.hk/thread-1037-1-1.html#.VofQ13wvdpo
Cheers
Hi, and thx for the help.
The driver is correctly installed now, i had to allow unsigned drivers in windows parameters.
So, i followed the tutorial, again.
I configured SP flash tool, clicked download, and then connected powered off P8000 with USB.
But, again, the phone displays recharging logo, and flash tool still waiting...
The phone is recharging so the USB is working, so i don't know how to make my PC detect the phone......
Is there a way or a thing that i missed?
thank you..
EDIT: i finally got a timeout error from flashtool..
I missed something, but what !? i can't remove P8000 battery, is there somthing to do to get it detected by windows?
Like a boot mode, or a magic formula... i'm open
For MTK Driver installation:
Did you follow skeletons Guide? http://forum.xda-developers.com/elephone-p8000/help/guide-windows-10-mtk-vcom-usb-drivers-t3264884
I'm sorry to say, that I do not have any experience with windows installation, this problem, because SPFlash tool performes on my 64bit Linux very well, without any driver trouble.
Cheers
Hi,
I'm on windows 8.
I used SP_driver_v2.0, that is an .exe
it's the only driver tips gived in most of tutorial
I allowed unsigned drivers installation, and i correctly installed it.
I tried too use flashtool before and after restarting the PC-> no changes
Flashtool doesnt detect the phone
I start getting crazy..
I have repaired mine, so i'll share
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
So the simple way to solve it is flashing the latest stock elephone p8000 ROM, which you can find on google easly
1. as described on other forums, you have to install the adnroid drivers, then get the sp flash tool, and have an un-zipped stock elephone p8000 ROM.
2. if you are stuck at bootloop, do the following to power off the phone so you can flash the ROM
1. Long press power button until power off
2.Do it fast--Press volume Up and then hold power button
3. choose recovery (volume up choose menu, volume down enter)
4. android logo with red triangle is displayed( "no command")
5. hold power button and press volume up
You're in recovery mode
3. select power off
4. open the SP flash tool >go to download tab>opne "scatter loading"( you will find it in the Folder where you unzipped the stock elephone p8000 ROM, if you have more folders there, chose "firmware" folder)
5. on the left side, under scatter loading, you will find a "pull-down" tab - it will be written "download" chose "firmware upgrade" or "upgrade"
6. start the process, then connect your elephone p8000 (it must be powere off) via usb cable to the PC, the process will start,and in less then 5 Minutes you have a factory new Elephone p8000 with the latest good update
7. WATCH OUT- it will erase all your data, absolutely all your data on the phone, except SIM and SD card.
Hope it helped, if not, feel free to ask me =)
Hello,
I have similar problem. Bought P8000 5 days ago. Did update today. Bricked. Stuck at logo ... I tried to flash but SP flush tool but the process isn't starting. When I downloaded ROM I received long list as on the screenshot: kaczorowscy.name/Screenshot.png
I have ubuntu - I see lsusb and dmesg see the phone (it is shut down from recovery menu) but maybe I am missing something ....
Ok here is what id did:
1. Get SP flashtool
2. get newest stock ROM
3. Shut down phone through android recovery menu (start phone with holding volume up, select recovery mode, wait for dead android, hold volume up and unblock button for 3 sec.)
4. Open SP flashtool - use "format all + download" of ROM (unzip and select scatter file from rom) - click start
5. Connect shut downed phone
6. Dot OK! from flashtool
PS. Flashing removed IMEIs - they are both written on the battery - you need to use android service menu to check them with special codes and reboot the phone.
Thanks ALL! :good:
Fix - Recovery Mode
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
When I was trying to root my p8000 I couldn't flash a custom recovery, fortunately I discovered that to access recovery on stock android you need to go to the screen with the android and "no command"/"no order" text and hold down Vol+Up and Power for 3~ seconds and then release power, this will boot you into recovery mode, If wiping cache/factory reset isn't enough "fastboot flash recovery <image>.img" SHOULD work now
hope this helped
I got a lenovo vibe shot z90-7 which was using Android 5.1. I found an upgrade rom on needrom to 6.0. I flashed it using qfil (qualcomm flashing tool) and it went all right, all functional. But I also wanted to unlock the bootloader and install a twrp (I found a procedure and twrp image on a russian forum). I followed the steps but it didn't work, I still wasn't able to unlock the bootloader. Thus, I was not able to enter fastboot anymore: from adb I was typing "adb reboot bootloader" and the device would reboot normally, not in fastboot mode. I decided to change to another rom (from needrom) which was claiming would allow you to unlock the bootloader. So, without hesitation I flashed it in qfil (edl mode) and it went all right, but I got stuck in boot loop. After the splash screen, the device shuts the screen off and does a long vibration and stays like that. If I connect it via usb to my pc I get a some "need to format drive" alerts, and in qfil I see "Qualcomm HS-USB Diagnostic 9006 (COM5)". If then I try to flash the rom I get this log:
Code:
Start Download
COM Port number:5
Switch To EDL
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
It's seems like I need to get in Edl mode first, but I cannot use adb and pushing vol+ and plug the usb at the same time (or a little bit first one or the other, I tried all) does't do anything but booting the device normally.
I also tried getting in fastboot mode (keep vol- and power button) but it doesn't work.
I read of an "engineering mode" by keeping vol- on boot. It does something, the screen becomes black, but it's on. On my pc the adb driver comes in in the popup, like if I'm in fastboot or adb, but on "fastboot devices" I can't see anything, while on "adb devices" I see a device, which is "? unauthorized". Strange to me, I can't do much with it since it's unauthorized and the screen on the device remains black. And after a few seconds (about 30) it gets back to long vibration and screen off state.
I can get into the stock recovery by holding vol+, vol- and power, but it's a very poor recovery. All I can do is reboot, shut down, wipe data and update. I tried to use "update" and put a zip file of an official rom downloaded into the sd card and named "update.zip" as suggested by the recovery, but I get an error (with no technical information about what kind of error), so no luck with that either.
I tried to force the qualcomm driver from "Qualcomm HS-USB Diagnostic 9006 (COM5)" to "Qualcomm HS-USB QDLoader 9008 (COM5)", then tried to flash using qfil, but I still get an error, even if this time is different:
Code:
COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
I finally tried to download the rom in .qsb format and get in engineering mode again, but the screen remains black and no sign of flashing possibilities.
Please help, I tried everything it came to my mind.
I also tried with miflash, but still got errors...
Thank you
Hello, did you solve the problem? i have the same as you....
regards
Hi guys.
I had the similar problem few moths ago. I tried to remember what i've done to fix it, but I don't remember all things, I hope this steps helps to find the solution.
Check this:
-Use Windows 7 (I tried with Windows 10 and always appears some errors)
-Use original miniUSB cable or good quality cables
-Install Lenovo Usb drivers
Turn ON phone and press Vol+ and Vol-, hold 3 seconds
If you cant enter Recovery mode (because is corrupt or bricked), phone will vibrate for 1-2 seconds and screen keep black. Now connect USB cable (check drivers, also if Qualcomm HS-USB QDLoader 9008 was installed)
Once you done, use QSFL or MiFlash (but not 2016 version!, never works to flash)
NOTE: I had some problems with my desktop computer with Windows 7 but no problem in laptop. So check it in more than one...
Good luck.
How I fixed this
I fixed it installing a update.zip via recovery (vol + plus vol - plus power) I found here
http://forum.xda-developers.com/android/development/vibe-shot-6-0-update-root-xposed-t3409989
This not fixed the phone , but allowed me to unlock bootloader entering in fastboot mode (vol + plus vol - plus plug usb) using this
http://lenovo-forums.ru/topic/18149-lenovo-vibe-shot-разблокировка-bootloader/
Then I was allowed to install TWRP as explained here
http://lenovo-forums.ru/topic/18150-lenovo-vibe-shot-расширенное-рекавери-twrp-by-sevenmaxs/
Then I was able to go to TWRP terminal and type
reboot edl
Phone went into downloader mode and I was able to install this rom with QFIL
http://www.needrom.com/download/lenovo-vibe-shot-android-6-0-1-1625-encn-unlocked/
and I restored NVRAM with a qcn file I found in Ebay after putting the phone in diagnostics mode. Then I changed imeid, meid and esn to the original ones I found in the box. Phone fixed.
Just note that this file was for a Z90-7 rom and it will not work with a Z40a20 rom.
Hope this helps someone.
francesco9696 said:
I got a lenovo vibe shot z90-7 which was using Android 5.1. I found an upgrade rom on needrom to 6.0. I flashed it using qfil (qualcomm flashing tool) and it went all right, all functional. But I also wanted to unlock the bootloader and install a twrp (I found a procedure and twrp image on a russian forum). I followed the steps but it didn't work, I still wasn't able to unlock the bootloader. Thus, I was not able to enter fastboot anymore: from adb I was typing "adb reboot bootloader" and the device would reboot normally, not in fastboot mode. I decided to change to another rom (from needrom) which was claiming would allow you to unlock the bootloader. So, without hesitation I flashed it in qfil (edl mode) and it went all right, but I got stuck in boot loop. After the splash screen, the device shuts the screen off and does a long vibration and stays like that. If I connect it via usb to my pc I get a some "need to format drive" alerts, and in qfil I see "Qualcomm HS-USB Diagnostic 9006 (COM5)". If then I try to flash the rom I get this log:
Code:
Start Download
COM Port number:5
Switch To EDL
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
It's seems like I need to get in Edl mode first, but I cannot use adb and pushing vol+ and plug the usb at the same time (or a little bit first one or the other, I tried all) does't do anything but booting the device normally.
I also tried getting in fastboot mode (keep vol- and power button) but it doesn't work.
I read of an "engineering mode" by keeping vol- on boot. It does something, the screen becomes black, but it's on. On my pc the adb driver comes in in the popup, like if I'm in fastboot or adb, but on "fastboot devices" I can't see anything, while on "adb devices" I see a device, which is "? unauthorized". Strange to me, I can't do much with it since it's unauthorized and the screen on the device remains black. And after a few seconds (about 30) it gets back to long vibration and screen off state.
I can get into the stock recovery by holding vol+, vol- and power, but it's a very poor recovery. All I can do is reboot, shut down, wipe data and update. I tried to use "update" and put a zip file of an official rom downloaded into the sd card and named "update.zip" as suggested by the recovery, but I get an error (with no technical information about what kind of error), so no luck with that either.
I tried to force the qualcomm driver from "Qualcomm HS-USB Diagnostic 9006 (COM5)" to "Qualcomm HS-USB QDLoader 9008 (COM5)", then tried to flash using qfil, but I still get an error, even if this time is different:
Code:
COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
I finally tried to download the rom in .qsb format and get in engineering mode again, but the screen remains black and no sign of flashing possibilities.
Please help, I tried everything it came to my mind.
I also tried with miflash, but still got errors...
Thank you
Click to expand...
Click to collapse
Hi, did you slove the problem? Same situation with me. But I managed to install twrp ( Chinese) but I can't install any rom .. After successful flashing it reboot with lenovo logo, then long vibrates.. When I connect it to PC. It show number of partition and need to format popup.. I tried different ROMs.. All via twrp. I don't use miflash or qfil.. If you have solved it please share how. Thanks.
i know how to enter in edl mode in z90-7 or z90a40
Hello
This is nisar I successfully entered in edl mode and flashed rom to know the procedure pm me on +919743392420 WhatsApp
Bricked Vibe Shot - multiple partitions in device manager - no edl
having read all the above I'd like to share small info once again, it is all about correct qualcomm drivers, you can get them from androidurdu.net, do not search on the site but click on mobile drivers then scroll down and download qualcomm usb drivers.zip . unpack and use "checked" folder within the zip, they are signed and work on any windows including 10th. You see, your brick might be having an edl times, but PC doesn't know without proper drivers installed. You might want to remove all earlier/bad driver versions, for example try sigverif command or just install below qualcomm drivers and try away.
1. connect phone with good usb cable, 2. press power button till it shuts, then release power button and press volume up and down same time and phone will enter edl mode itself almost instantly, if you had twrp installed then it'll enter there, if so run from terminal "reboot edl"; keep device manager open and comm tree will appear along.
other way is via adb reboot edl command, if fastboot doesn't work, or fastboot reboot-edl
on miflash when refreshed you see the short port name and the number like com4 or 3. now it's time to flash, but the last proven flash I did with QiFL, Miflash works as fine.
i used latest international marshmallow version. after first boot, within dev mode unlocked oem + enabled adb and connected to PC with phone turned on in order to accept handshake prompt.
unlocking bootloader is easy via adb command: adb reboot bootloader, then: adb bootloader unlock-go .
all files are available online via some russian speaking forum, you just need to install twrp, then place su.zip onto phone (I copied on internal memory), boot into twrp and flash; if clean - no errors flash then you got neatly rooted marshmallow phone.
my struggle with bricked vibe shot was worth it. earlier I noticed cpu was running high, all cores all the time. also many google apps which I wanted to eliminate for draining the battery and uploading stuff all the time.
right after flashing su.zip boot into phone and install kernel adiutor from play store, then take control of how your 8 cores behave. I discovered the minimums were set at 800+Mhz so I dropped them to 200, then below within cpu section enabled all "disabled" options for boost + enabled "ondemand" + plus few more. You got to understand the process and enjoy tuning your phone your way.
I've charged my vibe shot 3 hours ago and was randomly chatting on whatsap until now and I have 73% battery. Day before yesterday before the bricking, full charge would not last more than 3 hours, incredible battery performance thanks to "adiutor" .
One more important thing, use correct rom version for your phone because of advanced camera and specific drivers camera won't work well.
Names of files used to make my phone a super hero:
1. adb-setup-1.4.2.exe
2. Miflash_140509.exe
3. Qualcomm_USB_Drivers.7z via androidurdu.net
4. TWRP-3.0.2.0_Z90a40_by_SevenMaxs.rar - has .bat files inside; enter bootloader mode and shoot
5. UPDATE-SuperSU-v2.76-SYSTEMMODE-PRO.zip (I pay for my apps including supersu pro)
6. Z90a40_Android-L_unlock_7M.7z , or use command line via adb shell.
7. Z90a40_S363_160625_ROW_QPST.7z - latest intl Mashmallow Os , to make it more perfect download marshmallow google dialer - patched.apk.
8. QPST / QIFL , used to flash the above rom
I'm not a pro so small mistakes are acceptable, I hope.
ciao.
francesco9696 said:
I got a lenovo vibe shot z90-7 which was using Android 5.1. I found an upgrade rom on needrom to 6.0. I flashed it using qfil (qualcomm flashing tool) and it went all right, all functional. But I also wanted to unlock the bootloader and install a twrp (I found a procedure and twrp image on a russian forum). I followed the steps but it didn't work, I still wasn't able to unlock the bootloader. Thus, I was not able to enter fastboot anymore: from adb I was typing "adb reboot bootloader" and the device would reboot normally, not in fastboot mode. I decided to change to another rom (from needrom) which was claiming would allow you to unlock the bootloader. So, without hesitation I flashed it in qfil (edl mode) and it went all right, but I got stuck in boot loop. After the splash screen, the device shuts the screen off and does a long vibration and stays like that. If I connect it via usb to my pc I get a some "need to format drive" alerts, and in qfil I see "Qualcomm HS-USB Diagnostic 9006 (COM5)". If then I try to flash the rom I get this log:
Code:
Start Download
COM Port number:5
Switch To EDL
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
It's seems like I need to get in Edl mode first, but I cannot use adb and pushing vol+ and plug the usb at the same time (or a little bit first one or the other, I tried all) does't do anything but booting the device normally.
I also tried getting in fastboot mode (keep vol- and power button) but it doesn't work.
I read of an "engineering mode" by keeping vol- on boot. It does something, the screen becomes black, but it's on. On my pc the adb driver comes in in the popup, like if I'm in fastboot or adb, but on "fastboot devices" I can't see anything, while on "adb devices" I see a device, which is "? unauthorized". Strange to me, I can't do much with it since it's unauthorized and the screen on the device remains black. And after a few seconds (about 30) it gets back to long vibration and screen off state.
I can get into the stock recovery by holding vol+, vol- and power, but it's a very poor recovery. All I can do is reboot, shut down, wipe data and update. I tried to use "update" and put a zip file of an official rom downloaded into the sd card and named "update.zip" as suggested by the recovery, but I get an error (with no technical information about what kind of error), so no luck with that either.
I tried to force the qualcomm driver from "Qualcomm HS-USB Diagnostic 9006 (COM5)" to "Qualcomm HS-USB QDLoader 9008 (COM5)", then tried to flash using qfil, but I still get an error, even if this time is different:
Code:
COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
I finally tried to download the rom in .qsb format and get in engineering mode again, but the screen remains black and no sign of flashing possibilities.
Please help, I tried everything it came to my mind.
I also tried with miflash, but still got errors...
Thank you
Click to expand...
Click to collapse
have you try
adb reboot edl
Hey, I have the same problem as you, trying to do the step you did, but I get stucked at the first step,
I cannot find the file UPDATE.ZIP in the page from your link....
Could you help?
Thanks
josepgb said:
I fixed it installing a update.zip via recovery (vol + plus vol - plus power) I found here
http://forum.xda-developers.com/android/development/vibe-shot-6-0-update-root-xposed-t3409989
This not fixed the phone , but allowed me to unlock bootloader entering in fastboot mode (vol + plus vol - plus plug usb) using this
http://lenovo-forums.ru/topic/18149-lenovo-vibe-shot-разблокировка-bootloader/
Then I was allowed to install TWRP as explained here
http://lenovo-forums.ru/topic/18150-lenovo-vibe-shot-расширенное-рекавери-twrp-by-sevenmaxs/
Then I was able to go to TWRP terminal and type
reboot edl
Phone went into downloader mode and I was able to install this rom with QFIL
http://www.needrom.com/download/lenovo-vibe-shot-android-6-0-1-1625-encn-unlocked/
and I restored NVRAM with a qcn file I found in Ebay after putting the phone in diagnostics mode. Then I changed imeid, meid and esn to the original ones I found in the box. Phone fixed.
Just note that this file was for a Z90-7 rom and it will not work with a Z40a20 rom.
Hope this helps someone.
Click to expand...
Click to collapse
Sorry if it's reviving the thread but i found a way to unbrick the device from this state. Not sure if will work for all models because this one was a really weird one (almost all button combinations were different than any described on the internet). So my phone was from China (Z90-7 - later it showed that it's a Z90A40 and I had to flash that firmware) with a international chinese ROM and it god badly bricked (no edl, no lenovo recovery, locked bootloader etc. etc.). Now, when holding [vol+]+[vol-]+[pwr] (usually recovery mode according to the internet) it went into the Qualcomm 9006 diagnostics mode that shows a million partitions. There was no way i could get it into edl mode but there was the so called factory mode that is accessed by holding [vol-] and plugging in the usb before it vibrates. Through this I managed to flash firmware in .qsb format from a SD card and successfully unbricked the phone that I almost threw into the bin.
1. Check if your phone has "factory mode" [vol-]+[pwr] then release [pwr] or hold [vol-] while inserting usb cable.
- make sure to try different combinations, the button combinations on my phone were much different than what I mostly found on the internet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Download Vibe Shot firmware in .qsb format (Google it, the phone will warn you if it's not the right one (A40 or -7))
3. Copy the .qsb file into SD:/sdfuse
4. Insert the SD card into the phone (maybe a restart will be needed for it to be detected, you should see a message saying "DEV: External storage" when you select sd flash)
5. Select "SD update" and follow the instructions.
I hope this helps someone who can access the factory mode. This is so easy and I couldn't believe that there is so little information on flashing it this way.
Good luck.
i wonder how do you change HS-USB Qualcomm 9006 become HS-USB Qualcomm 9008?
Hi guys,
my wiley fox swift gets stuck in a continual optimising apps cycle. I can't enter recovery mode, when i press power+volume up it enters fastboot
(only see the black fastboot screen can't do anything). I did not change anything on my phone (not rooted) it worked fine yesterday and today i can't get it to work.
It's always optimising apps, if it's finished then i see the cyanogen logo and it starts optimising again shortly after.
I removed the battery and did wait about 15 minutes before putting it back in, i tried waiting (after 2 hours+ of it optimising i gave up),
i does not get recognised when i connect it to the pc (although i only used it to put stuff on the sd-card before) maybe a driver would fix this but i'm not sure which one.
I'm pretty clueless right now and i would be happy if someone can help me.
Saw the same thing on a friend's device today, used fastboot to factory reset the device. Insert USB in a powered-off device while holding vol+ then using fastboot do a "fastboot -w" to factory reset and recreate the (probably corrupted) data partitions.
i installed the minimal adb and fastboot connected my phone with my pc started it and tried it.
it doesn't recognize my phone and is stuck "waiting for any devices".
what can i do now? i'm not very experienced with android phones and fastboot.
dajohre said:
i installed the minimal adb and fastboot connected my phone with my pc started it and tried it.
it doesn't recognize my phone and is stuck "waiting for any devices".
what can i do now? i'm not very experienced with android phones and fastboot.
Click to expand...
Click to collapse
ADB needs debugging to be enabled in developer options
FASTBOOT will only work if the phone is in bootloader mode
I already said in my first post:
dajohre said:
I can't enter recovery mode, when i press power+volume up it enters fastboot
(only see the black fastboot screen can't do anything). I did not change anything on my phone (not rooted)
Click to expand...
Click to collapse
since i never changed anything in my phone I haven't enabled debugging in developer options, if I could access the bootloader mode I could reset my phone but like i said,
it enters fastboot and not the bootloader from which i could enter recovery mode
under these circumstances, can i do anything?
see here https://wiki.lineageos.org/devices/crackling/
Note they call bootloader mode Download
Ok i can access recovery mode now (it was explained wrong here)
i tried to factory reset but the problem still persits.
in recovery mode i did go to ->Wipe data/factory reset then i had the options (No/No/Yes -- delete all User data/No)
i choose the third option and it did load a short while. after a reboot it still wants to optimise apps.
what's the best option now? i can choose (Apply update\ Wipe data/factory reset\Wipe cache partition\wipe media\reboot to bootloader\View recovery logs)
Fix
Hi,
I had the same issue and wrote the Wileyfox customer support.
They provided me the following instructions to fix the issue:
Download:
* 1 - ZNH0EAS2NH
* 2 - ZNH2KAS7EB
* 3 - TOS111B
Repeat for File X in [1, 2,3] :
* Goto Recovery
* Update your phone using File X
Since this is my first post I am not allowed to post links.
Find the full document including file links here: h t t p s : / / we . tl / B1IpUP6wtB
Already after running the first update my phone booted again.
Only thing I noticed is that the UI feels a little laggy / slower than before.
Regards
Backstory
2 years ago, I installed nougat into my marshmallow zenphone. A few days later there was a problem with 3g and wifi, so after some searching, I found out I needed to flash modem.zip, after doing so, the phone no longer boot, bootloader is good, recovery is gone and fastboot is gone. Spent about 20+ hours trying to recover... but to no success. The main problem was using the XFSTK method, it did boot to fastboot, but the damn phone product code becomes a Z00A, so flashing a z008 rom led to fastboot refusing to flash. Flashing a z00a rom led to bootloop...
Since I wasted too much damn time trying to recover, and I needed a phone quickly, I bought a 32GB mi max for $120 and never looked back.... until today 03 March 2018.
Recovering the hardbricked Asus phone easily
1) Install the intel usb soc http://drive.google.com/file/d/0B2oMRhweQ4CHbURUNk1ZTHI2Mjg/view?usp=sharing
2) Disable driver verification in Windows 8/10 by rebooting into advanced menu
3) Install intel usb soc above
4) Download and install Download xFSTK Downloader v1.7 https://drive.google.com/file/d/0B2oMRhweQ4CHbDNQdy1jVUJFcEE/view
5) Download the files for xFSTK and unzip
ZE550ML http://drive.google.com/file/d/0B2oMRhweQ4CHcHg4WXJQckFGOTA/view? Usp = sharing
ZE551ML http://drive.google.com/file/d/0B2oMRhweQ4CHR21YaDdXdUNlOGs/view? Usp = sharing
6) Open xFSTK,
go settings, tick enable GP flag override and use the number 0x800000807
link the dnx fwr, ifwi and droidboot from step 5 as follows: https://i.imgur.com/mKZoUdi.png
7) Make sure your phone is off, click begin download then plug in phone, it will start flashing
Sometimes it fails while flashing firmware, sometimes it fails while flashing OS. Doesn't matter keep retrying. Pressing volume button while plugging in phone MAY help.
8) Once successful, you will see 4 color background, then usb cable image, then fastboot mode. If you fail halfway in flashing you will stop at either one of the images. Keep retrying until you reach fastboot.
9) At fastboot, you are safe. Go charge your phone for 1 hour. If your screen dies, do not press power button, press volume button it will remain in fastboot mode.
10) While your phone is charging, install asus flash tool https://drive.google.com/open?id=0B4uMV7GwfDAEYm5RWTFydXZWOTQ
Download the raw file https://drive.google.com/drive/folders/13In6163G8S9BbjiNlEOF-fOXhVIC0z9r?usp=sharing
11) With phone charged, plug in your phone and open the flash tool. Your phone should appear. If not replug usb cable/change usb cable/port, restart the flash tool and leave it plugged in and wait UNTIL the flash tool recognizes it. It will recognize... eventually.
12) select correct model, tick erase data, and locate the firmware. Once recognized, highlight it and click START
13) After 20 minutes, it will be stuck because of the change in serial number. plug out usb cable, restart program, plug back in.
14) Wait for the program to recognize the NEW serial number, then reflash the phone, this time IT WILL BE SUCCESSFUL and will boot into Android marshmallow.
Miscellaneous steps after unbricking
Unlock bootloader, flash recovery, flash custom firmware, root, gapps
Good of you to share. Thanks.
Bricked my own yesterday got it up and running after 6 hrs of looking at guides nice phone good spec but probably be selling on as it not getting any security updates any more I could live with marshmallow but bit wary of no security updates
I was using my oneplus 7T normally without root and with bootloader locked when it decided, out of nowhere, to fall into "Qualcomm Crashdump Mode". When I tried to reboot it, it just went into "Qualcomm Crashdump Mode" again. So I went into fastboot mode, unlocked it, and flashed an european ROM from here: https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T/ . However when the device tried to boot up it just went to "Qualcomm Crashdump Mode" again, so I tried using "MsmDownloadTool" (hotdogb_14_E.21_201105) ( https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.3994835/ ) and it worked, but this time when the device attempted to boot up it went into EDL mode and the bootloader was locked and when I tried to unlock it, it gave me an error related to "OEM unlock" not being enabled in developer options. So I tried using "MsmDownloadTool" (hotdogb_14_E.21_201105) again, and somehow this time it actually booted up. Still, after 10 seconds it went into EDL mode AGAIN (note: at this point, I couldn´t get out of EDL mode, I could only boot into anything else after the battery died, in the first boot). So I downloaded another ROM for msm but this time it gave me the error: Firehose GetUsInfo Failed, and the phone seems to disconnect and reconnect. From here I tried multiple ROMs for msm and always received the same error, even using the one I used originally. (Note: I have been waiting for my battery to die for 5 days, and it still has power; also tried removing the battery )
Output when trying to use EDL-master:
edl.py printgpt
Qualcomm Sahara / Firehose Client (c) B.Kerler 2018-2019.
__main__ - Trying with no loader given ...
__main__ - Waiting for the device
__main__ - Device detected
__main__ - Mode detected: sahara
Device is in EDL mode .. continuing.
Library.sahara -
------------------------
HWID: 0x000a50e100514985 (MSM_ID:0x000a50e1,OEM_ID:0x0051,MODEL_ID:0x4985)
PK_HASH: 0x2acf3a85fde334e2e28d64cbc416b2474e0e95cad4698f143e27479d67e92d99
Serial: 0xb0180648
SBL Version: 0x00000000
Library.sahara - Couldn't find a loader for given hwid and pkhash
Commands I tried to unlock bootloader:
fastboot oem unlock; fastboot oem unlock-go; fastboot flashing unlock; fastboot flashing unlock_critical
Can someone help me with this issue?
Sorry if the description was too confusing, long, or had any mistakes in terms of English. I am just trying to be as complete as possible.
The same arround here.....
Any solution?
Sounds like hardware failure (memory ram chips). Buy a cracked 7T and swap motherboard
First of all thank you for replying! I really appreciate it. Second of all, I did some research considering your reply and I stumbled upon this post: https://forum.xda-developers.com/t/oneplus-6-possibly-soft-bricked.4297489/ . What I did after seeing it was, I vacuum sealed my phone in a bag (to minimize condensation) and place it in the freezer for about 20 minutes I tried booting up the phone but it just went into edl mode again. However this time when I used MSM download to it actually was able to complete the whole process. The phone still didn't boot, but now I can enter fastboot and recovery. All this leads me to conclude that you are right.