Related
Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.
Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!
Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!
Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...
Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Veras07 said:
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Click to expand...
Click to collapse
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
fogame said:
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
Click to expand...
Click to collapse
I did everything, but the problem begins when I install the updates.
If I only install v5, my note doesn't reboot by itself.
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
sawixso81 said:
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
Click to expand...
Click to collapse
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Veras07 said:
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Click to expand...
Click to collapse
How did you update the baseband and bootloader? Mines doing the exact same thing
G2blkteg said:
How did you update the baseband and bootloader? Mines doing the exact same thing
Click to expand...
Click to collapse
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
As I have understood, you can only update the baseband and bootloader through ota. I Flashed the rom twice, the first time only the system was updated but no the baseband, the second did the modification of odin and everything went perfect.
G2blkteg said:
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Click to expand...
Click to collapse
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Veras07 said:
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Click to expand...
Click to collapse
So how did you modify odin to update the baseband and bootloader?
G2blkteg said:
So how did you modify odin to update the baseband and bootloader?
Click to expand...
Click to collapse
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Veras07 said:
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Click to expand...
Click to collapse
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
G2blkteg said:
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
Click to expand...
Click to collapse
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Veras07 said:
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Click to expand...
Click to collapse
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
G2blkteg said:
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
Click to expand...
Click to collapse
About the unlimited tethering I don't know.
Veras07 said:
About the unlimited tethering I don't know.
Click to expand...
Click to collapse
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
G2blkteg said:
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
Click to expand...
Click to collapse
That's the correct file.
Veras07 said:
That's the correct file.
Click to expand...
Click to collapse
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
G2blkteg said:
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
Click to expand...
Click to collapse
Place the file on AP
Mirror Link to N910TUVU2DOK2_N910TTMB2DOK2_TMB [FULL STOCK ROM]
Also: BOOTLOADER & MODEM
---Downloads---
Full Untouched ROM from Sammobile
Mega: https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Bootloader file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008410
Mega: https://mega.nz/#!atYXVJQI!KSMHRMcH4qPgoP7sxSWM0ihNMOU-eQwYISaimam5tdk
Modem file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008409
Mega: https://mega.nz/#!vlQ2VILY!NFCASlvP7Rf5kB3d2eN2sy3MC_3SLmQ945dRKB1nfzU
User: @eduardog131 provided links just to the modem and bootloader in a later post in this thread. I am simply providing the link in the OP Thanks!
OK so do we use odin
Thanks. Will we be able to root and custom recovery?
lilila said:
Thanks. Will we be able to root and custom recovery?
Click to expand...
Click to collapse
You should be able to ODIN flash TWRP then you will need to flash a custom kernel to get root, and flash Superuser.
I have not tried it yet though, so I have not verified if it works or not.
I tried flash clean rom via odin, fully bootup, reboot to download, installed TWRP recovery, then flashed superuser.zip. Bootloop.
There was this other article on the net about the 910C saying they got 5.1.1 but you have to flash back your booloader to 5.0.1.
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Did it work?
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Do you have a link for beastmode?
Rollablunt420 said:
Did it work?
Click to expand...
Click to collapse
Dunno. Left laptop at work but should since it's not enforcing. I'll know in a few hours.
sdaelr said:
Do you have a link for beastmode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3238775
Alternatively AEL or other non enforcing 5.1.1 compatible kernel are needed for Samsung lollipop 5.1 or greater with root.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Yes, it works for me.
来自我的 SM-N910T 上的 Tapatalk
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
[Update: 13-1-16: PIT file now available to recover from a bad brick]
[DO NOT USE UNLESS YOU NEED TO REPARTITION YOUR PARTITION TABLE, OR YOU'RE IN A BAD BRICK.]
https://www.androidfilehost.com/?fid=24369303960684492
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, you CANNOT downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
eduardog131 said:
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, it is unknown if you can downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
Click to expand...
Click to collapse
Pretty cool... Can you please do the same for the T3 version?
domhall said:
Pretty cool... Can you please do the same for the T3 version?
Click to expand...
Click to collapse
Sure, when I get time at home. (That is, unless someone beats me.)
~~
Razgriz said:
DOK2 is for both versions of the TMo Note 4.
Click to expand...
Click to collapse
T3 isn't interchangeable with T firmware.
I'm gonna go on the limb here, I'm 50% certain you can't go back to COG2... Be very cautious... When I Odin'ed DOK2 the process seemed odd not sure why lol
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Sent from my SM-N920T using xda app-developers app
manufan721 said:
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Click to expand...
Click to collapse
Yeah, pretty much agree here. This new modem has given me a lot less data drops. I had really spotty HSPA, with it dropping so constantly. Tested it out during school today and it hasn't dropped.
-------
N910T3 BL+CP parts ripped! I also managed to acquire a PIT file for the T3...DO NOT LOAD THE PIT FILE INTO ODIN3! I HAVE IT IN CASE SOMEONE WHO HAS A SEVERE BRICK CAN USE IT!
Same instructions as before for flashing the BL+CP parts. Reference a few posts up.
Bootloader file:https://www.androidfilehost.com/?fid=24269982087009029
Modem file:https://www.androidfilehost.com/?fid=24269982087009028
PIT FILE (YOU HAVE BEEN WARNED! DO NOT LOAD UNLESS THERE IS A SEVERE BRICK.)https://www.androidfilehost.com/?fid=24269982087009027
Confirm once you load DKO2 BL you can't go back to COG2 BL
ALLDAT said:
Confirm once you load DKO2 BL you can't go back to COG2 BL
Click to expand...
Click to collapse
Lawdy.. lol how many threads have you asked this in. I answered this in another thread.
Just got a small system update on my Sprint S6. Think it was like 29MB. Includes the April 2, 2016 security update. Not much else I can see.
Thanks for posting this. I will keep an eye out for any updated TAR on SAMMOBILE; if there is one I'll copy to Android File Host and post here.
I keep hoping for the apn edit to come back to ##data# section. But its not there
Sent from my SM-G920P using Tapatalk
I did the update and tried to install recovery. It didnt work
weirdfate said:
I did the update and tried to install recovery. It didnt work
Click to expand...
Click to collapse
Unfortunately, you can't install a OTA via twrp you must wait for the official TAR to come out
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
weirdfate said:
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
Click to expand...
Click to collapse
Do you have OEM unlock enabled? What's the error in Odin?
Sent from my SM-G920P using Tapatalk
weirdfate said:
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
Click to expand...
Click to collapse
confirm this: both TWRP 3.0.0-1 and 3.0.2-0 dont work on latest MM build PD2.
Bummer i guess i wont update then im worried about the next time i odin back if it takes the updates during setup. il be shi# of luck if twrp wont install lol.
But the one that works that i do got is new_S6_Spr_TWRP_MM-Bootloader2 have u tried that from 1614s thread
Try this through Odin: https://www.androidfilehost.com/?fid=24499762635999104
koop1955 said:
Try this through Odin: https://www.androidfilehost.com/?fid=24499762635999104
Click to expand...
Click to collapse
Thanks thats the one that ive used few times but i have not took the update and only will when all the developers decide to also.
Guys with no twrp on PD2 let us know if that works with the newest update please and thanks.
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1