Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Mr Hofs said:
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Click to expand...
Click to collapse
I followed some "back to stock" guide (from h t t p s://w w w.youtube.com/watch?v=SZuAjz4PIjU) for HOX that included installing a stock recovery and relocking the phone. However, I couldn't find the correct RUU. I tried using a new unlock token from HTCdev but obviously it didn't work as it's identical. Thanks for the help though!
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Mr Hofs said:
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Click to expand...
Click to collapse
The phone is connected directly to the USB and it is Relocked, occassionally showing the "security warning" under it. I downloaded the correct nandroid backup for the phone, but as I don't have a custom recovery I'm not able to use it. I tried to flash a stock recovery (again) but I keep getting the same "FAILED (remote: not allowed)" whenever I try to do any changes to the phone.
Why it is btw that we can't have a RUU for a certain version? No way to downgrade ?
S-on devices cant downgrade,only s-off devices can. But you need to find a shop that can offer that specific service, can't do it in anyway at home.
But i see you flash the unlock code from a specific folder. Try it like this :
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Mr Hofs said:
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Click to expand...
Click to collapse
Unfortunately that didn't work. It seems there's not much I can do now.
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
man all credits goes to @vastloper and next time it will be good to copy the command from the HTCdev site not to write it manually use the right command
@vastloper it will be good to quote him to see your comment. when you quote him he will receive the notification and will see his mistake with sure:good:
vastloper said:
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
Click to expand...
Click to collapse
Thanks a lot! :victory: I did indeed make a typo on that, and used the same command over and over again without rewriting it.
I was able unlock and recover back to stock. However, I'm not still able to use my phone due to the blank/black screen issue, and will be further investigating that.
Does anyone have a O2__001 CID Stock Rom??
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
Are you have battery take new unlocktoken and try again
Hi Everyone,
Does anyone have any instructions as of right now on how to recover a potentially bricked OnePlus 3? Doing some googling around yielded me to the conclusion that my OnePlus 3 bricked itself.
Thanks!
ManagerJosh said:
Hi Everyone,
Does anyone have any instructions as of right now on how to recover a potentially bricked OnePlus 3? Doing some googling around yielded me to the conclusion that my OnePlus 3 bricked itself.
Thanks!
Click to expand...
Click to collapse
do you have fastboot on your device???
can u enter fast boot by key combination vol down and power???
if yes then just install twrp recovery or stock recovery with following command
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
flash cm 13, beanstock,tipsy or RR rom if you use twrp
flash stock firmware if you use stock recovery
ManagerJosh said:
Hi Everyone,
Does anyone have any instructions as of right now on how to recover a potentially bricked OnePlus 3? Doing some googling around yielded me to the conclusion that my OnePlus 3 bricked itself.
Thanks!
Click to expand...
Click to collapse
Contact support.... you're the first one with a bricked device....
And it would be great if you could share the support e-mail.... it would help me get unbrick files for this device
---------- Post added at 22:17 ---------- Previous post was at 22:16 ----------
i.snehal.kiran said:
do you have fastboot on your device???
can u enter fast boot by key combination vol down and power???
if yes then just install twrp recovery or stock recovery with following command
flash cm 13, beanstock,tipsy or RR rom if you use twrp
flash stock firmware if you use stock recovery
Click to expand...
Click to collapse
Fastboot on op2 is already a mess and we don't have enough info of what could happen in op3... best avoid fastboot except for flashing twrp
Flash the stock ROM through twrp
ManagerJosh said:
Hi Everyone,
Does anyone have any instructions as of right now on how to recover a potentially bricked OnePlus 3? Doing some googling around yielded me to the conclusion that my OnePlus 3 bricked itself.
Thanks!
Click to expand...
Click to collapse
Your oneplus bricked itself?
are you sure there wasn't a human involved in the process?
As other people says, you're the first one with a " bricked" device, so please tell everyone what your device status is, and how it got bricked.
did you unlock bootloader, did you have root? as much info as possible..
anupritaisno1 said:
Contact support.... you're the first one with a bricked device....
And it would be great if you could share the support e-mail.... it would help me get unbrick files for this device
---------- Post added at 22:17 ---------- Previous post was at 22:16 ----------
Fastboot on op2 is already a mess and we don't have enough info of what could happen in op3... best avoid fastboot except for flashing twrp
Flash the stock ROM through twrp
Click to expand...
Click to collapse
I already have the link for that file. Someone shared. But, what next ?
Sent from my OnePlus2 using XDA Labs
anupritaisno1 said:
Fastboot on op2 is already a mess...
Click to expand...
Click to collapse
Why a mess?
Fastboot itself is very simple.
fastboot flash <<partition you need to flash>> <<file patch>>.
Is it different from the "common" fastboot we can find on a Nexus?
When I try to do this I get the following message:
target reported max download size of 536870912 bytes
sending 'recovery' (18677 KB)...
OKAY [ 0.568s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.590s
Any way I can force this to happen?
Thanks in advance
CyberCROC said:
When I try to do this I get the following message:
target reported max download size of 536870912 bytes
sending 'recovery' (18677 KB)...
OKAY [ 0.568s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.590s
Any way I can force this to happen?
Thanks in advance
Click to expand...
Click to collapse
You did 'fastboot oem unlock' first, correct?
I tried yes but that results in the following:
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.011s
CyberCROC said:
I tried yes but that results in the following:
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.011s
Click to expand...
Click to collapse
And have you enabled OEM Unlocking in Developer Options ?
BTW Please reply to my PM ASAP if possible.
Thanks.
Best Regards,
Naman.
I can't OEM unlock in developer options as I no longer have access to my device
PM answered
Experiencing the same problem here.
I had the same in other thread. OEM unock was disabled. Do You have working stock recovery or TWRP? If stock works You can flash stock rom by ADB sideload.
My bootloader is locked so it's showing FAILED (remote: Partition flashing is not allowed) and cannot get into recovery.
cepheid46e2 said:
My bootloader is locked so it's showing FAILED (remote: Partition flashing is not allowed) and cannot get into recovery.
Click to expand...
Click to collapse
I am experiencing the same problem right now. Cannot boot into recovery mode or flash something...stuck in fastboot mode. .
Any ideas?
I have the same problem too
sino84 said:
I am experiencing the same problem right now. Cannot boot into recovery mode or flash something...stuck in fastboot mode. .
Any ideas?
Click to expand...
Click to collapse
Only can acces to fastboot,i can´t write anything ,flash rom,flash recovery
FAILED (remote: Partition flashing is not allowed)
I have TWRP Recovery and my device unlocked and rooted and i want to lock my device and retunrn to stock OS but i make a mistake before flashing stock recovery i lock my OP3 this is the result
I tried
fastboot boot recovery.img
fastboot flash recovery recovery.img
fastboot flash TWRP_recovery TWRP_recovery.img
fastboot oem unlock
fastboot flash zip ota.zip
fastboot format userdata
I tried too to decrypt my op3 with OnePlus3-ToolKit with the same result
FAILED (remote: Partition flashing is not allowed)
I can´t enter to recovery or system
How we can solve it
Thanks
x___treme said:
Only can acces to fastboot,i can´t write anything ,flash rom,flash recovery
FAILED (remote: Partition flashing is not allowed)
I have TWRP Recovery and my device unlocked and rooted and i want to lock my device and retunrn to stock OS but i make a mistake before flashing stock recovery i lock my OP3 this is the result
I tried
fastboot boot recovery.img
fastboot flash recovery recovery.img
fastboot flash TWRP_recovery TWRP_recovery.img
fastboot oem unlock
fastboot flash zip ota.zip
fastboot format userdata
I tried too to decrypt my op3 with OnePlus3-ToolKit with the same result
FAILED (remote: Partition flashing is not allowed)
I can´t enter to recovery or system
How we can solve it
Thanks
Click to expand...
Click to collapse
try this:
http://www.androidbrick.com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008/
you need the OnePlus3_Unbrick_Tool_Full.rar to unbrick your phone, i was also in your situation,
you need also the Qualcomm_Diag_QD_Loader_2016_driver.exe with this two tools you can flash to restore the OP3
me helped al lot this thread http://forum.xda-developers.com/onep...icked-t3405700
a had a success with this part How to Make the device show as Qualcomm 9008
it is important that you have the correct driver installed on your pc that the phone will be recognized as Qualcomm 9008
I did the exact same stupid thing... locked bootloader before flashing stock recovery.
This post saved me:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
I used method 2 in the post which wiped everything but at least i got the phone back.
x___treme said:
Only can acces to fastboot,i can´t write anything ,flash rom,flash recovery
FAILED (remote: Partition flashing is not allowed)
I have TWRP Recovery and my device unlocked and rooted and i want to lock my device and retunrn to stock OS but i make a mistake before flashing stock recovery i lock my OP3 this is the result
I tried
fastboot boot recovery.img
fastboot flash recovery recovery.img
fastboot flash TWRP_recovery TWRP_recovery.img
fastboot oem unlock
fastboot flash zip ota.zip
fastboot format userdata
I tried too to decrypt my op3 with OnePlus3-ToolKit with the same result
FAILED (remote: Partition flashing is not allowed)
I can´t enter to recovery or system
How we can solve it
Thanks
Click to expand...
Click to collapse
ManagerJosh said:
Hi Everyone,
Does anyone have any instructions as of right now on how to recover a potentially bricked OnePlus 3? Doing some googling around yielded me to the conclusion that my OnePlus 3 bricked itself.
Thanks!
Click to expand...
Click to collapse
Since im a new member I cannot post links so ill have to give you directions.
Search google for Hard Bricked OnePlus 3 and it will be the first one called Mega Unbrick guide.
Use method 2. Ive used it multiple times when flashing goes wrong on my oneplus 3.
Another step, download the latest stock recovery from OnePlus and name it recovery.img and replace the one in the folder. You should understand more when you have all of the files.
You can download the latest recovery from OP at the bottom of the page linked here:
Google OnePlus 3 beta download and it should be the first one saying community build.
I cant flash everything on fastboot mode
i have usb enabled and bootloader unlocked latest
status: Bootloop, no recovery
only fastboot mode
help for a fix ... I bricked the tab
TRIED TO RETURN TO STOCK WITH FLASH ALL.BAT BUT ALL PARTITIONS END WITH UNKNOWN COMMAND
help i paid 700 $ for this tab ... i can reboot anduse fastboot mode... bootloader unlocked
Alessandro999 said:
help i paid 700 $ for this tab ... i can reboot anduse fastboot mode... bootloader unlocked
Click to expand...
Click to collapse
Are you using the latest FASTBOOT.exe?
Can you screenshot the CMD?
unknown commands usually indicate an error in the command not the execution of the command.
parakleet said:
Are you using the latest FASTBOOT.exe?
Can you screenshot the CMD?
unknown commands usually indicate an error in the command not the execution of the command.
Click to expand...
Click to collapse
i have fixed!!! just relock the bootloader... waiting for delete and erasing.... unlock the bbotloader and waiting for esasing
now can flash all i want
Alessandro999 said:
i have fixed!!! just relock the bootloader... waiting for delete and erasing.... unlock the bbotloader and waiting for esasing
now can flash all i want
Click to expand...
Click to collapse
Good job
Hi there,
I try to install lineageos on my xperia xz2 compact but i dont manage to get the bootloader unlocked.
The rooting status says : Bootloader unlock allowed: Yes. so i thought it should be fine but in fastboot mode the command
Code:
fastboot oem unlock <unlockcode>
gives me:
Code:
...
FAILED (remote: Command not allowed)
finished. total time: 0.069s
I tried with flashtool (found this in some forums) but i get some error as well. Even though i am not sure to use this program properly and I also got some
"No device is registered in Flashtool. You can only flash devices."
error message there.
any ideas?
problem solved, I didn't know that I would have to enable "oem unlock" in the device's developper options. what a fail..