Develop Bugs

boot loop odin Nand Write Start!!

So I've tried a lot of things, was running CMW and having some issues with cm11, so I wanted to go back to stock.
Found this thread:
http://forum.xda-developers.com/showthread.php?t=2582290
Tried to go through the same process because it seems like we had the same problem, Download mode works but Recovery doesn't.
I keep trying to flash:
philz_touch_6.07.9-i605.tar.md5
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I get the Nand Write Start!!
----------------------------------------------------------------------------------
So I tried check "Nand Erase All" and "T Flash"
End up with
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It fails but doesn't tell me why. I've tried different USB ports, Different Computers, different cables,
------------------------------------------------------------------------
When I try Odin 1.3 I get
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again doesn't show me what's failing.
So I'm at a total loss right now, I'm trying to avoid doing a PIT because everyone is talking about how it never works and just breaks phones. I'm not sure what other options I have because I can't get a boot loader on here that works.
Tried flashing:
I605_VRAMC3_RESTORE.tar.md5
and still end up with the same kinda results.
So any idea on what I should try next, still trying to avoid PIT because everyone has made it sound really scary.

Odin issues - no PIT partition

<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
softbricked phone, trying to restore to 4.4.4 from here. help
tried 3.07. 3.09, 3.10
and different usb

If Odin can't get the partition information from the phone, you'll need to find a pit file for your phone and flash it together with the stock firmware using Odin.

Here's a pit file for the SGH-M919.
smiley_face said:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
softbricked phone, trying to restore to 4.4.4 from here. help
tried 3.07. 3.09, 3.10
and different usb
Click to expand...
Click to collapse
Do you still need a pit file? Here is the pit file from my SGH-M919 T-Mobile S4. You are welcome to use it.
http://www.mediafire.com/download/6bbr7f9049uh338/m919.pit

Odin detects S4 mini , but no firmware download ? The phone is booted into recovery

Hi, can you give me some advice? The phone is detected in odin - i.e. i can see in odins log:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I used this official image: I9195XXUCOE4_I9195OXACOE1_I9195XXUCOE4_HOME.tar.md5 which is the standard german image, not provider specific.
After several tries it didnt work - i can also get into the recovery mode while pressing the volume down button, volume up button works but it wont boot that mode. The phone failed after i turned power off while an upgrade was performed (i thought it failed the upgrade , because i couldnt see any progress while the upgrade happend.)
Also i can not boot the phone without the batteery. I removed the sd and sim card.
Any ideas what i could do now ?

boot loader or recovery?
I dun know that recovery
flash team win one from here
https://forum.xda-developers.com/showthread.php?t=2678420
or clockworkmod 6.0.5.1
both working for me
dun matter what the prob is , but u need flash in download mode , volume down and power button + home
I dun think Odin can talk to your s4 in recovery mode ^^
And i dun know if i understood your prob xD

just another I9190 bootloop problem

Hello,
My s4 mini suddenly stopped working. I almost read the whole forum. Tried to update the pit file with odin etc.... But no chance? Can someone point me somewhere usefull because I am kinsda lost at the moment.
This is what happens when I try to wipe the data:
imgur.com/a/IOuZe
Odin log when I try to update the pit file:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Thank you!

T-Mobile S9 issues flashing to G960U1 firmware ...

I have tried flashing the G960U1UES9FVD1_G960U1OYM9FVD1_XAA downloaded from sammobile on two different computers and several versions of Odin, but every time I get
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5283 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Tried a patched Odin too (not sure if that would even help) and it just got stuck on SetupConnection. Have also been running Odin as admin, tried different USB ports & cables ... (one of the ports on my laptop is 2.0 still not working).
Current Android Build Number iS QP1A.190711.020.G960USQU9FVB2
I'm probably doing something obvious wrong, but I can't seem to find what that is & already spent a few hours trying to get this done!