So, I've been seeing A LOT of threads regarding bricked devices (be it soft or hard bricks). So, I decided to create this thread, so everyone with bricked devices post here for help, instead of filling our forums and XDA servers with a load of topics with the same stuff.
If someone knows of a general unbricking thread, please PM me or tag me with a link so I can post on this post.
I will PM a mod to pin this thread to top.
To all brickers,
Before posting, try this thread:{RECOVER SOFT-brick}[2012 XPERIA's]Recover ALL 2012 XPERIAs from SOFT-brick
Remember to give the author thanks
Xperia S Return Back To Stock!
Pre-Requisites
For All The New Users..
If You Did Something Wrong
If nothing is working out
Not Able to Fix
Need to Return Back To Original Firmware?
Here is the Guide For You
Click to expand...
Click to collapse
Return Back To Stock
GUIDE for Better Understanding With Pictures And Images For New Users
Explained Step By Step
Click -- [HERE]
Just a tip: Try downloading Sony Update Service and following the instructions if you get a green LED blink on your phone, which is way simpler to recover without any problems.
Guys My ION LT28h got bricked during a recovery using CWM.
First It was a soft brick, i did something , random pressing of buttons made it worse. its on HARD BRICKED STATE now. Its been more than 5 weeks.
So after some research i found out that my Kernel is ****ed up. My phone is Boot loader Locked, so i cant flash the Kernel separately.
Now few of our fellow xda members told me to unplug the battery cable from the motherboard.
I have successfully disconnected the battery cable from motherboard, i kept it disconnected for one whole night.
Whats the next step ?
Will i be able to flash it with flash tool after connecting the battery to motherboard back ?
Will i be able flash the busted Kernel to a working stock kernel ?
Accidentally messed up and soft bricked Ion- LT28h.
xperia Ion LT28h
ROM: JB 4.1 Pure CyanogenMod Based on CM 10 FXP 218
kernel: GI Kernel v3 or v5
Recovery: TWRP and CWM
Rooted and Unlocked Bootloader
Hi guys, above mentioned were my previous settings. Had occassional reboots and sometimes it was kinda laggy that's why i decided to flash it to another ROM - supposedly to ParanoidAndroid. After following steps to install PA, my phone was on bootloops, was in a hurry then freaked out, i tried soft and hardreset, and tried booting on recovery both on twrp and cwm to flash properly as what was instructed however i may have flashed the wrong zips interchangeably with other roms and kernels resulting to a total messed up ion. i could have restored immediately to a saved CWM or TWRP backup right away however, i only stopped resetting when my phone suddenly stopped responding, no Sony logo, no Xperia logo, no boot, just backlight on, does not turn off, soft and hard reset no nothing. i guess until the battery went dead, then i charged it the whole night.
after reading most threads on recovering softbricked phone, mainly this {RECOVER SOFT-brick}[2012 XPERIA's]Recover ALL 2012 XPERIAs from SOFT-brick thread, and after a couple of days of red led, i constantly charged, i patiently waited(2days) still no green led, however i found out that i can access fastboot. (blue led).. i managed to get to this fastboot mode(blue led) ONLY after i soft reset or power+vol.up/1 vibrate the phone once the backlight lits up- on&off - for about less than a minute then it goes back to red led. (i'll be calling that stage as backlit-on&off-then-back-to-solid-red-led cycle) but then again if i go to fastboot, it will stay in fastboot mode during flashes and it stays there until the battery runs out and goes back to red led. then i charge my phone again, but
during fastboot mode, i have tried flashing the kernel, system and boot image. all via Fastboot command prompt.
and all were successful. there were combinations like, flashing only the kernel, tried flashing kernel and system, tried boot image only, tried all the same time, tried system only, tried different kernels, system and boot img, BUT STILL my phone wont even give me the sony logo screen.
then i thought i may need to wipe cache and userdata so i also erased cache and userdate a couple of times via fastboot mode command prompt. and yes fastboot does detects my phone. it can reboot to bootloader or just the normal fastboot reboot. so i have no issues regarding phone and pc via using fastboot command prompt. and Same thing - all flashes were successful,
i have flashed i think more or less than a total of 50 times, flashing different combinations. Still it goes back to brick mode.. backlit-on&off-then-back-to-solid-red-led cycle.
i'd like to add that i have also tried flashing via fastboot mode using Flashtool. (thunder icon+selecting 'fastboot mode'). i have flashed the kernel and system, tried kernel only, tried both same time, tried system with boot.img tried flashing kernel with boot.img too, tried different combinations. again, all were successful, but still same result.
it only goes back to backlit-on&off-then-back-to-solid-red-led cycle.
a couple of days after it went to green. flashmode finally! thinking everything will now be alright, i decided to flash it using flashtool via flashmode. I connected phone to pc, after the solid red led and after backlit-on&off-then-back-to-solid-red-led cycle. and the it goes back to red led then the backlit on&off cycle, after observing my phone for hours i then knew that after, i guess about a hundred cycle of backlit on&offs it really does go to green led by itself and if i'm connected to the pc and flashtool it stays on green led or flashmode, however if im connected only on a wallcharger it goes to green led but will only stay there for like 1-2 seconds then goes back to red led and then the backlit on&off cycle.
then i thought just maybe my battery really needs to die as mentioned, since upon plugging my phone on to a wall charger it goes immediately to red led and there's really no response on the phone except only if you gonna wait for the backlit on&off cycle the n press power + vol up then it will respond and go to fastboot mode or power+vol down which goes to flashmode. then i decided to reset the battery by carefully unplugging the ribbon cable and i did. well, initially it did (led was off for a moment then changed to blinking red then solid red) but i have to go to work that time and had to continue only after coming home from work, and that did not resolved it.
i may have flashed my ion a hundred times or so to this date, still no luck. i have finally decided to re-locked my bootloader- and yes it is successfully locked now. - thinking PCC/SEUS/SUS would get it back to life but i'm wrong - it just cant detect my phone. PC companion detects it as Phone/Tablet only then after selecting Ion on the phone list it always says my device is upto date and no available software. (sad)
I also noticed that flashtool does not detect my phone as LT28h. It only says that it is connected to flashmode. Is that an issue too. I have tried diff versions of flashtool from 9.6 to 9.11 all same. i have also installed fastboot and adb as well as flashtool drivers, it sayas all were successfully installed however if im connected via flashtool flashmode, none seems to be detected on device manager, tried reinstalling and manually installing the sony sa0103 adb interface driver however after installing i get an error unable to start device. even if my phone is connected still the device on devicemanager still has an excalamation point. i'm using windows 8. i have flashed successfully before when my phone was in good state, however now that im on brick mode it seems that all flashes i've done did not push thru. also those times that i have flashed my ion via flashtool it says something like:
phone should be connected with usb debugging on and enabled install on unknown sources. i have tried flashing it using win7 pc phone was not detected still, however flashtool stated and detected my device was connected on usb debugging mode, but have has errors during flashing though.
since my bootloader is now locked im unable to flash now via fastboot. before bootloader status says- rooted now bootloader status is- ROOTABLE.
i previously owned xperia neo and have managed to flash it successfully without any issues, also this is the 3rd time i had bricked my ion and managed to fix it before..
i also want to ask regarding flashing back to stock - does that mean any stock firmware can be selected? can be .233 / .68 /.20 or the latest ICS 6.1.E.3.7? coz i have basically tried to all of those mentioned. also is the reason that my flashes were not successful is it because i was currently on 4.1 JB ROM and im flashing 4.0 ICS stock? I also have TWRP and CWM backups on my PC and on internal SD card, is there a way for me to flash or restore those backups via flashtool?
I'm running out of options, i'm desperate and on the verge of giving up.
i dont want to believe that i have totally messed up and hard bricked my phone. I do believe that there is a solution to this, and my phone can be recovered without sending it over to repairshop.. Today is the 3rd week and still struggling to get my phone back to life (even just the sony logo) . any suggestions before i unlock again my bootloader? please help. Any help will be gladly appreciated, and many thanks to everyone for spending time on reading my messed up and soft/hardbrick ion experience.
If you brick your device while flashing kernel and device do not respond any way then follow this little difficult but 100% sure method.
- Dissemble your phone.
- Disconnect battery ribbon from motherboard.
- Reconnect battery ribbon.
- Fastly connect USB cable while holding vol +/-
- Flash Kernel or FTF FW.
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Droiiiiiiiiid said:
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Click to expand...
Click to collapse
Did you try SUS ? Official update service ?
Droiiiiiiiiid said:
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Click to expand...
Click to collapse
I think that you should charge it more to be able to go into flashmode. Maybe until the red light will go off or it'll turn into green. Then try to go into flashmode. Good luck
MozzieZ said:
Did you try SUS ? Official update service ?
Click to expand...
Click to collapse
I was going to but that requires my device be in Flashmode.
Droiiiiiiiiid said:
I was going to but that requires my device be in Flashmode.
Click to expand...
Click to collapse
Read this, maybe it will help you.
http://forum.xda-developers.com/showthread.php?t=2344896
This is my first time got hard brick on my phone. I'm flash wrong ROM (it made for S but I flash it on SL) now my phone totally dead. When I put on wall charger it show constant red led and off several minutes later, try disassemble phone and disconnect and connect ribbon doesn't help to get flashmode and fastboot mode. Any help would be very appreciated.
EDIT: After disconnect ribbon battery I got notification on flashtool "device connected with usb debugging off" but led remains on constant red. Should I try rubber band tricks?
ahlulnugraha said:
This is my first time got hard brick on my phone. I'm flash wrong ROM (it made for S but I flash it on SL) now my phone totally dead. When I put on wall charger it show constant red led and off several minutes later, try disassemble phone and disconnect and connect ribbon doesn't help to get flashmode and fastboot mode. Any help would be very appreciated.
EDIT: After disconnect ribbon battery I got notification on flashtool "device connected with usb debugging off" but led remains on constant red. Should I try rubber band tricks?
Click to expand...
Click to collapse
After disconnecting and connecting back the battery cable , you wont get access to flashboot/flashmode instantly. disconnecting the cable will reset the phone.
If you are getting red led means , its charging on low power. You should keep on wall charging for some hours , say 12 + hours.
After that try flashing the kernel alone , first . you will have to hold the flash mode button for sometime. say 5-10 minutes. then if u have enough charge in your phone it will flash the kernel alone. if u are successful in flashing the kernel, then charge again for some hours , 2-4 hours then try to flash the entire ROM.
Read the Thread Recovering Bricked Phones. This will help. I recovered my phone following the method shown in that thread.
Be patient bro, you can recover your phone, just that it will take some time
Captain Droid said:
After disconnecting and connecting back the battery cable , you wont get access to flashboot/flashmode instantly. disconnecting the cable will reset the phone.
If you are getting red led means , its charging on low power. You should keep on wall charging for some hours , say 12 + hours.
After that try flashing the kernel alone , first . you will have to hold the flash mode button for sometime. say 5-10 minutes. then if u have enough charge in your phone it will flash the kernel alone. if u are successful in flashing the kernel, then charge again for some hours , 2-4 hours then try to flash the entire ROM.
Read the Thread Recovering Bricked Phones. This will help. I recovered my phone following the method shown in that thread.
Be patient bro, you can recover your phone, just that it will take some time
Click to expand...
Click to collapse
Thanks for your fast reply, but I'm already put on wall charger 1 day, and the red led got turn off (no led at all). I think I'll try rubber band trick tonight and leave it till morning.
Hey guys I'm having a problem with my Acro S... It's bootloader is unlocked.
It was soft bricked due to a command I ran on Terminal Emulator (dd if=/dev/zero of=/dev/block/mmcblk0). After inputting that command I safely turned off the phone (Long press Power button, Choose Power off). After turning off, phone was completely dead, no response. It was on 80% battery for sure. It happened last week Saturday (July 20). I then charged my phone for 2days+. On the first day (July 21), no red LED appeared, on the 2nd day (July 22), constant red LED appeared, 3rd day (July 23), red LED disappeared. I then prepared my flashtool for flashing the JB firmware .211 KERNEL ONLY. So I plugged in my phone with volume down pressed, I pressed it for 15mins! My finger was f*cked, after 15mins... nothing happened, RED LED just disappeared and I just heard the Windows USB sound. Flash process didn't start, phone didn't give me a GREEN LED. I tried it again and again and miserably same thing happens, can't go to flash mode. Tried the same with volume up button for fastboot mode but still nothing happens, the RED LED just disappears!
Should I just leave my phone charging on the wall socket even if the RED LED disappeared? To get green LED?
SOMEBODY PLEASE HELP ME! I NEED MY PHONE SO BAD! :crying:
i was installing the prerooted/deodexed stock lt28h rom through cwm in the middle of instalation my phone rebooted and came into a sony bootloop i forced it shutdown by pressing power and volume up now its not starting not even charginig what to do please help :crying::crying:
Flash Tool
Be calm and sit back now put your phone to charger for whole night and then next day download flashtool and a firmware for you device and fladh it your device will breath again.......
tejasvi1 said:
i was installing the prerooted/deodexed stock lt28h rom through cwm in the middle of instalation my phone rebooted and came into a sony bootloop i forced it shutdown by pressing power and volume up now its not starting not even charginig what to do please help :crying::crying:
Click to expand...
Click to collapse
we have desame problem my phone is not charging no ligths/led and cant power on after pressing power and up because im stuck in boothllop after afgrading via OTA.
theprint said:
we have desame problem my phone is not charging no ligths/led and cant power on after pressing power and up because im stuck in boothllop after afgrading via OTA.
Click to expand...
Click to collapse
thks for sharing but i have alraedy solved my hard brick problem my phone is back and running normally
Well, I have a rooted phone. Like an idiot I deleted some files from the Busybox .bin directory because Busybox said it had found more than a version of Busybox. Ok, after I deleted one version or so I thought, Busybox prompt me up with some message like Big Problem. Well, I restarted my phone wich was working fine at the time, but after restart won't start, I only see the pink led and SONY logo for a few seconds and then the SONY logo fades, and it does that like 5 times and then the red led appears and stays like this for a few minutes wile plugged in ofcourse, and then again the pink led and so on with SONY logo fading away not starting up. What to do?
I am downloading the firmware right now. I hope that with Flashtool I can flash it. My phone is plugged in and is booting, well trying to boot continuously, when SONY logo appears after a second disappears and also I can see the pink led. Although I can put the phone in recovery also in flashmode I cannot start it, I hope that I can flash another firmware on it.
Tried flashing, not working. What now?
AlinTheron said:
Tried flashing, not working. What now?
Click to expand...
Click to collapse
Do you have zip data in your internal memory? try yo flash it using CMW. or if this way didn't work try to press power button and volume up together until your phone vibrate 3 time.
SOLVED [ Flashing custom ROM with Flash Tool ]
It was very hard to do because my battery was 0% and not charging at all,but I managed to keep the phone in Flash Mode through the flashing process.
I flashed Cm13 in my XPERIA M c1904 CM13 was quite stable but it was not reading my SIM Card, I found on internet that maybe flashing with TWRP version 2.6.0 will fix the problem so I flashed the recovery in my phone and after I unplugged from the usb phone didn't start earlier I was getting vibration then it didn't start, I was able to go in flash mode I flashed some other recoveries even they didn't made any difference. I kept my phone for charging for a night in the morning now there is no vibration just red light blinks 3 times and nothing else...cant even get in flash mode or fastboot mode...to flash stock rom from flashtool. When I connect the phone with the usb no blue light comes or red and green light flashes just the red light ..... its annoying earlier also I tried flashing cyanogen mods and they caused me errors earlier cm12.1 didn't got any cellular signals and my imei gone blank... Please Reply fast!!! I really loved this cm13 if only the sim card problem was not there.....
I have the same problem here. I flashed the CM13's recovery img, booted into recovery but it wouldn't read the SD card, so I couldn't install the ROM. So I flashed another ROM's boot.img with TWRP and tryied to install ArchiDroid that I had installed in the past. After the installation it won't turn on, just the 3 red light blinks.
Can't connect to fastboot mode or flash mode.
I solved the problem now. In my case it was a dead battery.
I borrowed a charged battery from another xpm and the flash mode connection worked.
Then I flashed a stock firmware to restore my xpm back to normal.
After that I managed to charge the battery normally.
It seems that if you don't have an firmware installed, the battery won't charge.
blinking red thrice
Me too had same prob in unrooted xperia m.Went to sony service and they replaced charging port and did a software update...now ok...