My phone has a single dust particle inside the camera glass[emoji20] though it's not affecting the camera, I'm afraid that it might attract more dust in the future as the phone is just 20days old. Btw this is a replacement device as the first device which I received had a pinkish tint on the left side of the screen. And now the replacement window is closed and I cannot return it anymore[emoji19] . Why does this happen to me.btw I'm using the faso transparent bumper case which attracts a lot of dust between the phone and the silicon case which I usually clean every two days
Sent from my ONEPLUS A3003 using Tapatalk
The same problem I had with my OPO
My suggestion is to take it to the nearest OnePlus service center and get it cleaned under warranty.
Related
I like to think that I look after my handset and indeed the screen and casing are untouched. But look in bright light at the lens cover in the back cover and it has numerous very light scratches.
It must be a very soft plastic. Will it effect quality and can it be replaced?
Thanks
Remove the back cover and compare picture quality. You can see there is a massive difference. I'm having yellow tint in every pic.
Any back covers on the market with better lens cover?
Get a new back cover and cover the lens part with screen protector, thats what I recommend
That wont necisarily help, since some users have reported that the non scratch coating on the inside of the window also becomes scratched over time on some phones.
I'm going to bite the bullet soon & try the method suggested here
http://forum.xda-developers.com/showthread.php?t=764673
Worst I can do is knack my lens & if so, just buy a replacement cover. First ever time I've had anything like this on any of my phones & again, I do take care of it with screen protector & softcase...
Clean it with Displex - I had the same issue and it really worked - And Displex is only a few euros... Alternatively Brasso should also work, however I have not tested this.
I had the same issue. I think there is some layer over the plastic. I rubbed the cover with a oakley pouch for a couple minutes and the layer faded away revealing shiny plastic. I knew mine could not be really scratched. It's been fine ever since.
Sent from my HTC Desire using Tapatalk
Displex. Found half a tube that must be nearly 10 years old - used on a beloved Sony Ericsson T68i (first colour screen). And seems to have a worked on my Desire. Just to can't understand why it got scratched in the first place as it is slightly recessed.
Must be very soft plastic which is a disappointing economy.
Nutsonfire said:
I had the same issue. I think there is some layer over the plastic. I rubbed the cover with a oakley pouch for a couple minutes and the layer faded away revealing shiny plastic. I knew mine could not be really scratched. It's been fine ever since.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I did the same thing. Seems like some thin layer is what gets scratched. You can remove it gently with nail (or tooth, like i did LOL)...
Sent using XDA app from my Desire
Rather then rip off another forum , I'd though I'd post the link here :
http://androidforums.com/desire-tip...mera-picture-video-quality-4.html#post1947239
In short: all you do is remove the cheep plastic cover from your case that goes over the lens.
I tried it and it has improved my pictures / vids , the problem the other forum are now trying to work is what to replace the cheep plastic cover with ?
Some folk have paid about 25 GBP for glass... mmmmm
I took the cover off mine and now it is exposed
However I think the extended battery and case from mobile fun may work as it has an entire new back case and camera cap
May work as it is an entire new case
Sent from my HTC Desire using XDA App
I just cleaned the plastic cover with soap. It turned out there was a layer of dirt covering the lens cover since new (can still see some of the stains but not directly over the camera) and now I can barely tell the difference
The dirt was probably glue residue from case assembly process.
I done this about three months ago and am still getting amazing pictures, the plastic bit had quite a few light scratches on it so the pictures were coming out with a soft focus effect rather than being sharp and vibrant. I was concerned that the camera was exposed but the actual lense sits quite deep in the case so it is fairly safe imo. I've been using it like this for about three or four months and all is still good
Sent from my HTC Desire using Tapatalk
I read that the gap between the bezel and the glass is to help with the glass expanding due to heat, but it seems to collect dust a lot and its driving me nuts. Anyone know of a way to prevent this or a slim case that covers the gap so dust does not get in there?
i don't see a problem with my phone, mostly because the case is hiding it all LOL
and even when i do take out the case, i don't see dirt collecting there
i just go blow it off easily with a gasp of air with my mouth
Mine too!!! Have 2 white specs in top left side and don't wanna stick something in there and scratch it... Annoying thing is that my d30 case covers everything up but that little damn corner where the power button is... Ugh
Sent from my SGH-T989 using Tapatalk
I just noticed this dust accumulating in there today. Hrm.
just puff it every now and then to prevent excess accumulation and prevent it from turning into dirt
this is between the bezel and glass .. so not under the glass right? this is a huge problem with my nexus one and don't want another phone where i have to deal with it
I use the body glove case from tmobile when I'm at work. My work enviroment is extremely dirty and very dusty. I mean to the point where you clean the area and by the end of the day there is a pretty thick layer of flux (lets just say dust) everywhere.
When I take my case off on the weekend my bezel is clean
dime079 said:
this is between the bezel and glass .. so not under the glass right? this is a huge problem with my nexus one and don't want another phone where i have to deal with it
Click to expand...
Click to collapse
The SAMOLED screens are fused to the class so there is no gap for dust to collect.
To get rid of the dust I use a stiff lens cloth damp with lens fluid and use a corner to clean. Works perfectly
Sent from my SGH-T989 using xda premium
dime079 said:
this is between the bezel and glass .. so not under the glass right? this is a huge problem with my nexus one and don't want another phone where i have to deal with it
Click to expand...
Click to collapse
dust between the bezel/screen common problem with any phone that has gap between the bezel and screen. like one person said, the digitizer is fused with the actual screen on Super Amoled screens. so dust shouldn't get underneath. However, screen repair cost more due to the fact the whole screen+digitizer has to be replaced instead of one or the other.
to get the dust out,I usually just take a very thin paper,fold it in half,and slide it. I've been doing the same method on my past phones.
This is the second Galaxy Note 4 I purchased with dust under the back camera lens cover. I gently took the second Note 4 out of the box and immediately checked the back camera with a loupe under the right light. Sure enough, the same type of skin dust is under the lens cover sitting right on top of the lens... same as the first GNote4 I bought and returned. Both of them came from AT&T as brand new devices.
Do you think these are returned items or do they come like this straight from the factory or even from the AT&T factory? This is crappy for such an expensive high-end phone.
Is there any way to fix it without making the issue worse? Otherwise I'll have to return this one too. Perhaps the third time will be a charm. This is unacceptable.
Thanks for your advice.
Just a simple question since you said you immediately looked at it after taking it our of the box:
Did you remove the protective plastic from over the lens? It is hard to see and and the phone takes great pictures even with on (not as good as when it is off but still not noticeable if you are not aware).
Mad383Max said:
Just a simple question since you said you immediately looked at it after taking it our of the box:
Did you remove the protective plastic from over the lens? It is hard to see and and the phone takes great pictures even with on (not as good as when it is off but still not noticeable if you are not aware).
Click to expand...
Click to collapse
Thanks. That's the first thing I looked at since my last Note 4 had the same issue. Yes, I was aware of the protective plastic but I was looking through the hole. I did take it off anyway and it was still there below the glass lens cover sitting right on top of the actual lens.
I was not aware you could take great photos with the protective plastic still in place.
I was wondering if there's anything I can do to fix this? HERE in the 5th post down, this guy says he looked at 5 Note 4's and each one had dust under the lens cover.
Thanks.
Edit, I just added a photo of the lens. This is supposedly a BRAND NEW GN4 just out of the box.. You can see the dust sitting right on top of the lens and there's finer dust around the sides or bellows. This all looks like skin particles.
That photo looks like it still has the plastic on it.
See the plastic?
Thanks. I should have taken the photo with the lens protector off to avoid confusion. Like I said, I removed the plastic protector and the dust was still there below the glass and on top of the actual lens and around the bellows.
I just ordered an exchange for a new device. If the 3rd one comes with dust sitting right on top the actual lens, I will return it and buy something different. I had a Sony Ericsson K790A for about 7 years. and there still is not even one spec of dust under the lens glass.
This is a picture of my fiance camera.
Sent from my SAMSUNG-SM-N910A using XDA Premium 4 mobile app
duracool said:
This is a picture of my fiance camera.
Sent from my SAMSUNG-SM-N910A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That camera lens looks dust free. Although, is that a spec on the lens? I see two reflections and one spec. Could be all reflections, Thanks
Replaced it for another one.... this one is MUCH better.
So as the title reads my rear metal camera protector just came off as I was removing my new poetic affinity case and am I safe super glueing it back on or open a ticket?
Technically I don't see a problem with super glue, just make sure that you use something that can withstand heat at least up to 60°C.
And ofc make sure it doesn't cover any part of the glass.
That said, I'd open a ticket. This should be covered under warranty.
Sent from my OnePlus 3 using Tapatalk