It seems there would be a problem in flashing normal downloaded SU and have to go through the long process of flashing systemless SU after which have to upgrade it.
Is it normal for you guys too?
How come 1+3 bricks after installing normal SU?
b.t.w. personal note: thanks to one of the oneplus rep that was in the euro tour in Rome the TWRP recovery fix worked (sorry forgot your name ). Really appreciate the chat and help out!
No, i downloaded normal su (SuperSU) and then flashed it through TWRP. I don't know which su you are using, but there are loads of us who have installed SuperSU without an issue.
nemexs said:
It seems there would be a problem in flashing normal downloaded SU and have to go through the long process of flashing systemless SU after which have to upgrade it.
Is it normal for you guys too?
How come 1+3 bricks after installing normal SU?
b.t.w. personal note: thanks to one of the oneplus rep that was in the euro tour in Rome the TWRP recovery fix worked (sorry forgot your name ). Really appreciate the chat and help out!
Click to expand...
Click to collapse
You may have the wrong flashable, flashing supersu on the OP3 for me is very quick and painless. Make sure you have the latest from chainfire's website v2.76 at the time of me posting this. : http://download.chainfire.eu/supersu-stable
PS: regular supersu is both systemless and "normal" root it makes a decision during installation determining whether your device can support normal root and if not then it does a systemless boot.img patch.
StykerB said:
You may have the wrong flashable, flashing supersu on the OP3 for me is very quick and painless. Make sure you have the latest from chainfire's website v2.76 at the time of me posting this. : http://download.chainfire.eu/supersu-stable
Click to expand...
Click to collapse
You beat me to pointing him to it. If I can add, there's a dedicated SuperSU thread to seek help if SuperSU causes an issue:
http://forum.xda-developers.com/showthread.php?t=1538053
Highly unlikely but just in case. If you are not sure, there are sufficient number of toolkits out there that can simplify the job for you.
@tropicanapure @StykerB
Have tried them the only way I can flash SU is downloading @ahmed_radaideh 's oneplus3 toolkit and then flashing his SU. Tried the normal version and the problem seems to be present (brick), yes chainfire's su. If I don't want to do full wipe I'd have wipe system and just reflash stock and then systemless su
nemexs said:
@tropicanapure @StykerB
Have tried them the only way I can flash SU is downloading @ahmed_radaideh 's oneplus3 toolkit and then flashing his SU. Tried the normal version and the problem seems to be present (brick), yes chainfire's su. If I don't want to do full wipe I'd have wipe system and just reflash stock and then systemless su
Click to expand...
Click to collapse
Then you may want to check the process y you are using for this.
If I can ask what exactly are you trying to fix? Do you already have SuperSU installed? And you are trying to move to systemless?
Or are you unable to install SuperSU itself? If yes, then you may want to post to the SuperSU thread too.
tropicanapure said:
Then you may want to check the process y you are using for this.
If I can ask what exactly are you trying to fix? Do you already have SuperSU installed? And you are trying to move to systemless?
Or are you unable to install SuperSU itself? If yes, then you may want to post to the SuperSU thread too.
Click to expand...
Click to collapse
I had no problem in installing it systemless, however just wanted to see if everyone else had to go through the same process. It seems not, now I'm trying to find out how come I can't install normally.
nemexs said:
I had no problem in installing it systemless, however just wanted to see if everyone else had to go through the same process. It seems not, now I'm trying to find out how come I can't install normally.
Click to expand...
Click to collapse
You still haven't mentioned the process you use[emoji6]
The process most commonly used via TWRP is to download the zip from the link above and flash it. That's all there is to it.
tropicanapure said:
You still haven't mentioned the process you use[emoji6]
The process most commonly used via TWRP is to download the zip from the link above and flash it. That's all there is to it.
Click to expand...
Click to collapse
my bad, yes I use twrp method 3.0.2 the most recent one, flash stock rom and then flash su
nemexs said:
my bad, yes I use twrp method 3.0.2 the most recent one, flash stock rom and then flash su
Click to expand...
Click to collapse
Assuming your bootloader is already unlocked beforehand, the straight answer to your question is yes, that's how most of us do it.
No problem with flashing SU whatsoever,
and i rather not to use any toolkit to flash either recovery or anything,
fastboot for recovery and recovery for anything else,
Simple, straight and safe
otonieru said:
No problem with flashing SU whatsoever,
and i rather not to use any toolkit to flash either recovery or anything,
fastboot for recovery and recovery for anything else,
Simple, straight and safe
Click to expand...
Click to collapse
doesn't work for me.
Related
As title.
I always rooted my gnex using an unsecure boot image.
Now I can boot with an unsecure boot image, I can push/chmod su, superuser and daemonsu using adb but than what should I do?
What should I do to root the phone?
Thanks.
sblantipodi said:
As title.
I always rooted my gnex using an unsecure boot image.
Now I can boot with an unsecure boot image, I can push/chmod su, superuser and daemonsu using adb but than what should I do?
What should I do to root the phone?
Thanks.
Click to expand...
Click to collapse
You can either flash the SuperSU .zip by Chainfire in a custom recovery or you can take the .zip apart and do it manually. Push all of the files in the .zip to the corresponding locations on your phone and look at the updater-script to see if you need to do any other commands. Root in 4.3 is different and Chainfire's method basically uses a script to enable it at every boot. I have not read about any other superusers working for 4.3, though I could have missed it.
mwalt2 said:
You can either flash the SuperSU .zip by Chainfire in a custom recovery or you can take the .zip apart and do it manually. Push all of the files in the .zip to the corresponding locations on your phone and look at the updater-script to see if you need to do any other commands. Root in 4.3 is different and Chainfire's method basically uses a script to enable it at every boot. I have not read about any other superusers working for 4.3, though I could have missed it.
Click to expand...
Click to collapse
is there a way to undo this process once done?
sblantipodi said:
is there a way to undo this process once done?
Click to expand...
Click to collapse
Naturally, backtrack your steps.
beekay201 said:
Naturally, backtrack your steps.
Click to expand...
Click to collapse
Can I safely remove all the files copied from the zip ?
sblantipodi said:
Can I safely remove all the files copied from the zip ?
Click to expand...
Click to collapse
Yes.. Restoring whatever in the process..if you modified anything that was there already.
Galaxy Nexus 4.3 NO ROOT w/ SuperSU_1.51.zip
Ok XDA - you're my only hope. I've completely lost root after flashing the last two PA releases. I just flashed the most recent (dirty), flashed GApps, rebooted, Flashed SuperSU_1.51/zip, Wiped Dalvik/cache in TWRP, rebooted, SuperSU says no binary installed, please manually root. Losing my mind here, need to get rooted again, could someone lend me some backup?
innerspace said:
Ok XDA - you're my only hope. I've completely lost root after flashing the last two PA releases. I just flashed the most recent (dirty), flashed GApps, rebooted, Flashed SuperSU_1.51/zip, Wiped Dalvik/cache in TWRP, rebooted, SuperSU says no binary installed, please manually root. Losing my mind here, need to get rooted again, could someone lend me some backup?
Click to expand...
Click to collapse
Did you manage to solve this problem?
I've got the same problem now...(There is no SU Library installed... This is a problem!)
Previously I had root but SU Library wouldn't update, ChainFire told me to re-root which caused me to lose root completely, tried again to root, without any luck.
Stuck without Root
AMKhatri said:
Did you manage to solve this problem?
I've got the same problem now...(There is no SU Library installed... This is a problem!)
Previously I had root but SU Library wouldn't update, ChainFire told me to re-root which caused me to lose root completely, tried again to root, without any luck.
Stuck without Root
Click to expand...
Click to collapse
download the most current supersu.zip and flash it in recovery.
if you're using a toolkit (i bet you are) STOP IT.
Zepius said:
download the most current supersu.zip and flash it in recovery.
about 2 minutes prior to your reply, I updated the "Toolkit" along with all the other items (supersu, img, etc..)
And after that, my device is rooted again.
Although, the main reason I started all of this was to update my device's build further, but it seems the OTA update is now gone... I'll have to wait for it appear again and see how it goes...
Zepius said:
I'll keep that in mind...
if you're using a toolkit (i bet you are) STOP IT.
Click to expand...
Click to collapse
Thanks for the reply!
Much appreciated!
Click to expand...
Click to collapse
AMKhatri said:
Did you manage to solve this problem?
I've got the same problem now...(There is no SU Library installed... This is a problem!)
Previously I had root but SU Library wouldn't update, ChainFire told me to re-root which caused me to lose root completely, tried again to root, without any luck.
Stuck without Root
Click to expand...
Click to collapse
I did, though I'm fuzzy on how exactly, and no, no toolkits here. IIRC I ended up wiping, updating recovery, and then manually flashing, but I had to do it multiple times to get root to stick. Sorry I don't have any better info to provide, glad to hear a) I wasn't the only one who experienced this problem, and b) you got your root back.
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
Click to expand...
Click to collapse
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Click to expand...
Click to collapse
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
buhohitr said:
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
Click to expand...
Click to collapse
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
deV14nt said:
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
Click to expand...
Click to collapse
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
wha2do said:
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
Click to expand...
Click to collapse
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
wha2do said:
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
Click to expand...
Click to collapse
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
22sl22 said:
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Thanks - that was the post had been reading through - appears after the kitkat OTA, latest posts mentioned problems with SU when running the original CF-AUTO Root method (flashing autorootp600mj4.tar.md5). Wondering if flashing the "newer" CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5
would be best. At this point feel confident either way!
deV14nt said:
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
Click to expand...
Click to collapse
Yep, will be downloading TWRP v2.6.3.3 and flash it and SuperSU after rooting. After rooting, will be curious to see where I sit with superuser (sorry, reading the latest posts kind of muddy whether a SU app is already installed or not, lol)...
Thanks everyone for all the great input & help!!
Hey guys, I'm fairly new to the android scene when it comes to the rom and rooting side of things so I just have a few questions about Sunshine and the whole process in general. Sorry if this may have already been asked but after a quick search many of the answers to these questions seem to be outdated.
1. Do you need to be rooted in order to use Sunshine?
2. If I do, is there any method to root my phone? I can't seem to find any without paying some money.
The only reason why I would want to root my phone is so I can use Titanium root and back up my data.
3. Do I have the order right?
Use Sunshine (gains S-off/unlocks bootloader)Install a custom recovery (TWRP)Super SU (Does this root my phone?)Install Cyanogenmod
4. If I have the order correct, at what point should I backup my data and when would my data get wiped?
5. And if I'm backing up my data should I back it up to my SD card and remove it, or do something else?
Once again, I'm sorry if most of the answers to these questions seem obvious but this is my first time tampering with my phone so I would appreciate any help!
Ok so a little update, I used sunshine, installed twrp, and tried to flash super su but I got stuck on a bootloop. Any help? I tried wiping the cache/dalvik.
.-. said:
Ok so a little update, I used sunshine, installed twrp, and tried to flash super su but I got stuck on a bootloop. Any help? I tried wiping the cache/dalvik.
Click to expand...
Click to collapse
The latest supersu zip will give you a bootloop. The previous version works fine. I don't have it anymore but you will need to download a rom and flash it.
Flyhalf205 said:
The latest supersu zip will give you a bootloop. The previous version works fine. I don't have it anymore but you will need to download a rom and flash it.
Click to expand...
Click to collapse
Would you be able to drop a link please? or give me version number?
.-. said:
Would you be able to drop a link please? or give me version number?
Click to expand...
Click to collapse
Are you looking for Sense rom or CM?
Sense roms you can find them http://forum.xda-developers.com/verizon-one-m9/development There is a complete stock rom and a few modded versions
CM you can find here. http://forum.xda-developers.com/verizon-one-m9/orig-development/rom-cyanogenmod-13-0-t3339509
CM does lack VoLTE
.-. said:
Ok so a little update, I used sunshine, installed twrp, and tried to flash super su but I got stuck on a bootloop. Any help? I tried wiping the cache/dalvik.
Click to expand...
Click to collapse
This is a common issue, it happened to me too, so I wrote a quick post how to avoid it.
https://forum.xda-developers.com/verizon-one-m9/help/s-offed-unlocked-bootloader-via-t3444629
After successfully flashing CM12.1 and playing around with it a little bit, I wanted to completely remove root (to get a few apps running). So I was advised to download SuperSU and use it to make a full/complete root removal. After that I de-installed SuperSU and disabled root in the Developer Options.
Well, that worked, I could run the apps that were unhappy with just root disabled in Developer Options. But now I want to have root back and I read in a couple of place that just flashing the latest SuperSU.zip from recovery might be a bad idea.
Any suggestions how to properly re-root my CM12.1 ?
aalemann said:
After successfully flashing CM12.1 and playing around with it a little bit, I wanted to completely remove root (to get a few apps running). So I was advised to download SuperSU and use it to make a full/complete root removal. After that I de-installed SuperSU and disabled root in the Developer Options.
Well, that worked, I could run the apps that were unhappy with just root disabled in Developer Options. But now I want to have root back and I read in a couple of place that just flashing the latest SuperSU.zip from recovery might be a bad idea.
Any suggestions how to properly re-root my CM12.1 ?
Click to expand...
Click to collapse
Not sure what would be bad about it. If it's an issue with latest version, just use 2.46
levone1 said:
Not sure what would be bad about it. If it's an issue with latest version, just use 2.46
Click to expand...
Click to collapse
ok, thanks for the prompt answer! I am currently trying to find where I read this..... anyway, will then probably just flash it and see if it works
aalemann said:
ok, thanks for the prompt answer! I am currently trying to find where I read this..... anyway, will then probably just flash it and see if it works
Click to expand...
Click to collapse
https://download.chainfire.eu/696/supersu/
levone1 said:
https://download.chainfire.eu/696/supersu/
Click to expand...
Click to collapse
this is exactly the version I flashed onto my CM12.1, worked flawlessly
I keep having this problem. I just tried both KINGROOT and CF-AUTO ROOT.
After doing this whole process through ODIN. I then try to flash the latest TWRP from their website : dl.twrp.me/jfltetmo/twrp-3.2.0-0-jfltetmo.img.tar.html
Then after that finishes, I try to boot into recovery and it gives me the message: recovery is not seandroid enforcing and just sits there.
I have a tmobile s4.
and I also checked if I am indeed rooted by using an app from the play store to check root and it shows Im rooted.
Any help would be great.
Root isn't needed to flash a twrp.
Tried flashing the latest stock rom and twrp without rooting the phone?
audit13 said:
Root isn't needed to flash a twrp.
Tried flashing the latest stock rom and twrp without rooting the phone?
Click to expand...
Click to collapse
Yup didn't work after trying it all the only thing that did work was SkipSoft Unified Android Toolkit and it was the easiest thing I ever used.
Krappa420 said:
Yup didn't work after trying it all the only thing that did work was SkipSoft Unified Android Toolkit and it was the easiest thing I ever used.
Click to expand...
Click to collapse
I have the exact problem, can you kindly explain in details how you went about it? I already downloaded SkipSoft.
Same issues here, buddy.
I tried to work on solving it out for approximately 8 hours and still no sign of success. Tried to reflash stock OS back on the phone via ODIN and it went successful. Tried CF-Auto-root file and it went through successful. But when it only came to the TWRP file, it went successful onto flashing on ODIN's side, but now something is interfering with the boot up process onto TWRP now. Hopefully there's a alternative towards this issue, since i've been wanting to reflash a Nougat OS onto the device.
Edit: I give credit to @Krappa420 for the mention of "SkipSoft Unified Android Toolkit" because i just installed the program on my laptop now and it went successful. But since i already had other materials pre-installed, some others with ODIN and ADB installed can just download this TWRP version here: https://dl.twrp.me/jfltexx/twrp-2.7.0.0-jfltexx.img.html
Edit #2: Seems that the TWRP version is too old to flash some of the newer OS's, such as nougat itself. Will find a way to update TWRP without breaking the boot up process, like the past attempts
Edit #3: After fiddling with TWRP versions 2.7.0.0 and up, i managed to get it capped up to 3.1.1 any future versions will most likely not work, so you're capped at 3.1.1 Here's the link for flashing it with ODIN: https://dl.twrp.me/jfltexx/twrp-3.1.1-0-jfltexx.img.tar.html
So you twrp 3.1.1 and it will work right
I having the same issue
Thank you
so do i need to install cf-auto root first or the twrp 3.11
what are the steps to install
Thank you for helping a disabled veteran
timj3371 said:
so do i need to install cf-auto root first or the twrp 3.11
what are the steps to install
Thank you for helping a disabled veteran
Click to expand...
Click to collapse
It wouldn't really matter what order you're using.
You can use CF-Auto-Root to root it for you while you have stock recovery still, and after you can flash to TWRP and use a custom recovery afterwards
Or you can flash TWRP first and flash a SuperSU zip file afterwards and it'll give you root while maintaining to have TWRP installed.
But to sum it up, it wouldn't matter what order you choose. Help yourself
Trwp
What version of twrp I need to use
Thank you
timj3371 said:
What version of twrp I need to use
Thank you
Click to expand...
Click to collapse
TWRP version 3.1.1
Thank you for the help I have lineage installed. Wow so fast. How ever when trying to root it I get a error says binary occupied. If I uninstall I get no root available. How do I install root ? Thank you so much
A disabled veteran
timj3371 said:
Thank you for the help I have lineage installed. Wow so fast. How ever when trying to root it I get a error says binary occupied. If I uninstall I get no root available. How do I install root ? Thank you so much
A disabled veteran
Click to expand...
Click to collapse
Before anything, try to install the SuperSU app over on the play store, if it says you're not rooted, you may have to restart the whole process within TWRP and reflash the SuperSU Zip file.
Thank you
Says the binary is occupied in su
Where do I find su zip
Should I use the chain fire auto zip
Thanks
timj3371 said:
Says the binary is occupied in su
Where do I find su zip
Should I use the chain fire auto zip
Thanks
Click to expand...
Click to collapse
Try this one: https://download.chainfire.eu/696/supersu/
If it keeps on persisting, I'll have to find another way
I tried that file and it just sits in booting. I left it be then reinstated the ROM. Still no root its OK tight not to have root
Thank you
timj3371 said:
I tried that file and it just sits in booting. I left it be then reinstated the ROM. Still no root its OK tight not to have root
Thank you
Click to expand...
Click to collapse
Yeah try to re-flash the ROM again but this time flash magisk through TWRP since SuperSU is being trippy on your S4
Thank you for the help
Dummy me I found out from reading other forums you have to go in to tools and enable root after going in to recovery and flash the root file in the extra section.
Every thing works
Thank you so much
Disabled veteran