Stuck On Samsung Boot LogoRooted With Kingo Root
First, I Used Rashr To Get Philz Touch.
Second, Tried To Flash Cyanogenmod 13
Said It Was A Bad Zip
Third, Turned Of Tablet And It Booted Into Recovery Every Time I Turned It On
Fourth, Used Odin To Try And Flash Normal CWM
When Booting The Tablet, It Just Shows The Samsung Logo
Related
Hey guys,
I seriously screwed up my Note (T889). I installed the latest nightly of cm10.1, but it got stuck in a boot loop. I pulled the battery and tried to boot into cwm, but it would only boot into download mode or the loop. I tried to use odin to flash cwm back onto the phone, which seemed to work (I could boot into cwm once). While in cwm I did a factory reset and then rebooted the phone. Now when I turn it on it sits on the screen that says Samsung Galaxy Note 2 for a while then goes black, nothing else. I can boot into download mode, but I can't boot into cwm or the stock recovery any more. I tried using odin to flash cwm again from download mode, but I still can't boot into anything else.
I really just want my phone to be usable again right now, so if anyone can help me out at all I would really really grateful, thanks!
I've read this thread which seemed similar, but unless I'm doing something wrong my problem seems to be slightly different: http://forum.xda-developers.com/showthread.php?t=2034323
Flash TWRP then flash a aosp kernel.
this is XXXDDDAAA
Thank you so much, it's back to stock now!
So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.
Gnarled said:
So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.
Click to expand...
Click to collapse
Can you load a rom and kernel on a SD card and flash it ? Are you still unable to get into download mode ?
If you cant load a rom on an sd card then try download mode and just flash this : http://forum.xda-developers.com/showthread.php?t=1739426
in odin. It will reroot you and you can go from there.
if you're able to use the above attached link to get your device up and going again (with root), you'll have to install a custom recovery again. not a big deal, just didnt want you to boot into recovery to flash something and find yourself in stock vs custom recovery. cheers!
my tmob s4 is stuck on boot screen i tried to update twrp from twrp manager and it said unsuccessful and ask to reboot into recovery i said yes and it rebooted and now when it goes to boot screen and says on top in little blue words botting recovery it just stays there what can i do?
i tried battery pull and Manually going into recovery nothing seems to work plz help.
UPDATE: odin latest firmware NK2 working great!
The lateat version of twrp is borked. Its what caused your problem.
Any previous version will work fine
[[SOLVED]]
Hello
i was trying to root my GT-P5200 using odin 3.07 (with CF-Auto-Root.tar), after getting "pass" in odin, i disconnected my tab and tried to boot, it stuck on the Samsung Galaxy logo.
now i cant boot even into recovery mode, i have access only to the Download mode
i don't know what to do
please help
[[UPDATE]]
i flashed a stock firmware (md5 file) using odin, now when i turn it on it shows Samsung Galaxy logo for 5 seconds then restarts, now i can get into recovery mode, it shows an android with red triangle
i tried wiping data/factory reset, wipe cash, but it didnt help
[[solved the problem]]
i flashed the stock firmware via odin, then twrp recovery also via odin
then via twrp recovery flashed a new rom
any help please?
Hi,
I really need help here, i've been googling for a week now and I can't find a solution
I wanted to install a custom rom on my Tab 3 Lite (SM-T110), as its stock rom is really slow (device is not rooted)
I already did this process once with my Tab 10.1
I used Odin to install custom recovery
I followed all the instructions but it just doesn't work
When I install TWRP and I try to get to recovery my tablet stays stuck on the Samsung logo no matter how long I keep the buttons pressed
When I install CWM and I try to get to recovery my tablet goes from the logo to a black screen and stays like that.
I can only manage to install stock recovery and I manage to get it to work.
Since I didn't manage to do that with Odin I tried via adb sideload on the stock recovery
But when I do that I always get the same error
E: signature verification failed
and then the process stops and goes back to the main menu.
What am I doing wrong?