Related
Good news, everyone! CM 11 is running
So far, everything except ANT+ seems to be working, but I couldn't test all of it. So you be the judge. If you have any problems, fix them. Help each other, I might even try to help, but I don't have the time to fully maintain this build. Device trees and everything needed to build this will come shortly and I'm sure someone capable will take over maintenance, soon!
As with every CyanogenMod rom, you will need an unlocked bootloader and a custom recovery. Gapps are not included.
I am not responsible for any bricking or data loss or whatsoever!
Download: cm-11-20140313 (Updated Build!, md5: 1a5062071cde1c8a1d8d5d7466a0f445)
Changelog:
20140312: Initial Build
20140313: Sensors fixed
Known Issues:
Transitions lag some times
First Camera start takes a couple of seconds (Known bug on the Z1, too)
ANT+ isn't working
Massive thanks to Bumble-Bee and xkonni! I am somehow unable to link them as contributors, god knows why..
XDA:DevDB Information
Unofficial CM11, a ROM for the Sony Xperia Z1 Compact
Contributors
crytic, intervigil
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-03-12
Last Updated 2014-03-14
<>
ok, those are the repos this is built from:
https://github.com/xkonni/android_device_sony_amami
https://github.com/xkonni/android_kernel_sony_msm8974
+ CyanogenMod repos for honami
use extract files for proprietary stuff
have fun
AWESOME!
xkonni said:
ok, those are the repos this is built from:
https://github.com/xkonni/android_device_sony_amami
https://github.com/xkonni/android_kernel_sony_msm8974
+ CyanogenMod repos for honami
use extract files for proprietary stuff
have fun
Click to expand...
Click to collapse
Here we go! Thank you!
Does it have all the features from stock rom??
tania247260 said:
Does it have all the features from stock rom??
Click to expand...
Click to collapse
This rom has nothing to do with stock.. Apart from a couple of proprietary firmware files.
I'm testing the rom and will report back as soon as I find anything interesting. I'm really excited!
Yay! Great news!
(Shouldn't it go to Original Development section for Z1C? )
Sent from my D5503 using Tapatalk
Works great, but has a few bugs
First off, thank you so much for putting this together.
I'll be able to pull logs later when I get home, but quickly:
Animations run very slowly. I've disabled them for the time being.
I've had some issues waking from sleep. Will try to isolate.
The camera launches very slowly, but this is also the case on the Z1 CM11 build.
orrorin said:
First off, thank you so much for putting this together.
I'll be able to pull logs later when I get home, but quickly:
Animations run very slowly. I've disabled them for the time being.
I've had some issues waking from sleep. Will try to isolate.
The camera launches very slowly, but this is also the case on the Z1 CM11 build.
Click to expand...
Click to collapse
I've found the following issues so far:
Proximity sensor does not work (ANT+ related, I assume)
Photosphere does not show up at all, no matter what camera version you install. I have a 4.3 camera whose Photosphere worked fine on the stock rom. I tested others and none worked on CM 11
Yes, animations/transitions are slow in certain situations, but not always
I'm not sure the battery level is being measured correctly. Either this thing is amazingly more optimized or the reading is wrong. I'll be able to test that fully tomorrow when I start the day with a full charge
I'm really glad this came out. These issues are not gonna stop me from using the crap out of this rom! Thank you, OP and other contributors! :good:
orrorin said:
First off, thank you so much for putting this together.
I'll be able to pull logs later when I get home, but quickly:
Animations run very slowly. I've disabled them for the time being.
I've had some issues waking from sleep. Will try to isolate.
The camera launches very slowly, but this is also the case on the Z1 CM11 build.
Click to expand...
Click to collapse
Yeah they do some times for me, too. OpenGL etc are working perfectly, no idea why that happens so far. It's smooth most of the time though. Will try to debug
Never had that, could you try to replicate that error and produce logs?
It launched very slowly the first time, for me, too. But now its almost instantaneously
Gaúcho comedor said:
I've found the following issues so far:
Proximity sensor does not work (ANT+ related, I assume)
Photosphere does not show up at all, no matter what camera version you install. I have a 4.3 camera whose Photosphere worked fine on the stock rom. I tested others and none worked on CM 11
Yes, animations/transitions are slow in certain situations, but not always
I'm not sure the battery level is being measured correctly. Either this thing is amazingly more optimized or the reading is wrong. I'll be able to test that fully tomorrow when I start the day with a full charge
I'm really glad this came out. These issues are not gonna stop me from using the crap out of this rom! Thank you, OP and other contributors! :good:
Click to expand...
Click to collapse
Don't think its ANT+ related, but yeah, I can confirm that. Will debug later
Isn't Photosphere a Nexus exclusive feature? I always thought so. But then, I only used Nexus devices in the past..
Transitions, yeah, what I wrote earlier
For now, battery seems normal for me, it has been pretty amazing on stock, too. But I haven't gotten this ROM running nearly long enough to say if battery life is longer or not.
Thanks for the reports!
Awesome work thanks !
Poweramp and DSP manager crashes
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
Sensors are fixed, so is ANT+ probably. As soon as I checked whether ANT really works or not, I'll upload another build.
crytic said:
Sensors are fixed, so is ANT+ probably. As soon as I checked whether ANT really works or not, I'll upload another build.
Click to expand...
Click to collapse
I'm downloading the new version now and will report later. Thank you again for your contribution. That's really amazing.
When I try to install this rom via Phils Recovery, then the installation always cancels with the message: This package is for "D5503, amami, anami" devices, this is a "honami". How can I install CM?
Hadschi92 said:
When I try to install this rom via Phils Recovery, then the installation always cancels with the message: This package is for "D5503, amami, anami" devices, this is a "honami". How can I install CM?
Click to expand...
Click to collapse
By using CWM recovery or by asking Phil to set the proper product name
Honami = Z1, anami = Z1c
crytic said:
By using CWM recovery or by asking Phil to set the proper product name
Honami = Z1, anami = Z1c
Click to expand...
Click to collapse
Problem solved, I installed wrong Recovery Version from Phil. I installed the version for Z1 instead of Z1C
Playing a little bit around with CM I found some things out:
1. When I charge my phone with magnetic cable, CM thinks my phone is in docking station. As effect the sound is disabled because the phone tries to route it through the docking station port.
2. In standby, camera app should be startet if camera button is pressed. There is only an option to turn on screen and to unlock phone with camera button. So two clicks on camera button are needed to start camera, which is uncomfortable.
3. On my motorola defy, cyanogenmod supported to save apps on the sd card. Is it possible to include this feature also in this cm version?
And as already mentioned:
Camera is slow and animations are laggy.
1. Well the charging pin should only be used on docks so I think that's normal.
2. Would need some modifications for that probably.
3. Motorola defy has an outdated OS of android... apps on sdcard has been removed since android 4.0 ice cream sandwich.
Hadschi92 said:
Playing a little bit around with CM I found some things out:
1. When I charge my phone with magnetic cable, CM thinks my phone is in docking station. As effect the sound is disabled because the phone tries to route it through the docking station port.
2. In standby, camera app should be startet if camera button is pressed. There is only an option to turn on screen and to unlock phone with camera button. So two clicks on camera button are needed to start camera, which is uncomfortable.
3. On my motorola defy, cyanogenmod supported to save apps on the sd card. Is it possible to include this feature also in this cm version?
And as already mentioned:
Camera is slow and animations are laggy.
Click to expand...
Click to collapse
Hadschi92 said:
Playing a little bit around with CM I found some things out:
1. When I charge my phone with magnetic cable, CM thinks my phone is in docking station. As effect the sound is disabled because the phone tries to route it through the docking station port.
2. In standby, camera app should be startet if camera button is pressed. There is only an option to turn on screen and to unlock phone with camera button. So two clicks on camera button are needed to start camera, which is uncomfortable.
3. On my motorola defy, cyanogenmod supported to save apps on the sd card. Is it possible to include this feature also in this cm version?
And as already mentioned:
Camera is slow and animations are laggy.
Click to expand...
Click to collapse
1. Yeah, originally the magnetic port was just intended for docking stations, so the behaviour is kind of wanted. Not sure if the Z1(c) actually is able to route audio through the port, so maybe this actually should be disabled. There definitely should be a quick fix to make this adjustable at least.
2. Same thing, should be an option for that in the future.
3. Apps2SD is not officially supported anymore. There are hacks afaik, but I won't do and support that.
Slow camera is a known bug, even for the Z1. As for the animations, I have no idea on how to debug them. Benchmarks and games suggest that OpenGL is working just fine. Any ideas anyone?
As you know Cyanogen has released official CM12 nightly builds for Oppo N3 - http://download.cyanogenmod.org/?device=n3
Anyone tried it? What is working and what is not? Are the developers visit here? What to expect from future releases?
Anilexis said:
As you know Cyanogen has released official CM12 nightly builds for Oppo N3 -
Anyone tried it? What is working and what is not? Are the developers visit here? What to expect from future releases?
Click to expand...
Click to collapse
I have it on my N3. Fingerprint reader is the only thing that doesn't work. Haven't tried the O-click 2.0, but it is represented in the settings menu.
Which nightly are you using? 20120320 just boots to a black screen with only the statusbar visible and unresponsive, for me.
e: 20 and 19 have this bug. 20120318 seems to work so far, by which I mean I can actually start the initial setup process.
e2: Stock camera app seems buggy. First few times it wouldn't start, then it started working, but the second time you launch it it breaks the camera for all apps. Installing a third party camera app seems to fix it.
The way CM implements the rotating camera is nice though. It pretends the phone has two cameras, and when an app asks for the front camera (e.g. Skype) it'll rotate it for you and flip the image. Only downside is that manual rotation doesn't flip the image once you pass the half way mark.
Lum_UK said:
Which nightly are you using? 20120320 just boots to a black screen with only the statusbar visible and unresponsive, for me.
e: 20 and 19 have this bug. 20120318 seems to work so far, by which I mean I can actually start the initial setup process.
e2: Stock camera app seems buggy. First few times it wouldn't start, then it started working, but the second time you launch it it breaks the camera for all apps. Installing a third party camera app seems to fix it.
The way CM implements the rotating camera is nice though. It pretends the phone has two cameras, and when an app asks for the front camera (e.g. Skype) it'll rotate it for you and flip the image. Only downside is that manual rotation doesn't flip the image once you pass the half way mark.
Click to expand...
Click to collapse
I just flashed the March 23rd build. So far I've only had a few hours with it but it's running really smooth. Here's a few notes:
I was running a rooted chinese coloros rom and cm12 has fixed the issue with not being able to pick up 5Ghz wifi.
No issue with the defaul camera app or any others
The fingerprint sensor is still broken as well as the button
My proximity sensor is broken. I downloaded a toolbox and it's not detecting the promixity sesnor at all. I've read you can fix this by flashing the modem but I can;t seem to find them. I saw some posts about the 1+1 having the same issues with recent cm12 nightlies so I'll keep flashing nightlies until I go home for the weekend and I'll try to find the Chinese N5207 modem with the help of my fleunt in Chinese parents.
Lum_UK said:
Which nightly are you using? 20120320 just boots to a black screen with only the statusbar visible and unresponsive, for me.
e: 20 and 19 have this bug. 20120318 seems to work so far, by which I mean I can actually start the initial setup process.
e2: Stock camera app seems buggy. First few times it wouldn't start, then it started working, but the second time you launch it it breaks the camera for all apps. Installing a third party camera app seems to fix it.
The way CM implements the rotating camera is nice though. It pretends the phone has two cameras, and when an app asks for the front camera (e.g. Skype) it'll rotate it for you and flip the image. Only downside is that manual rotation doesn't flip the image once you pass the half way mark.
Click to expand...
Click to collapse
Sorry, I'm not sure which one was the latest nightly i was on, can't check either since I'm back on ColorOS on that device at the moment. But i think the latest i tried might have been somewhere around March 18:th.
ahoj79 said:
I have it on my N3. Fingerprint reader is the only thing that doesn't work. Haven't tried the O-click 2.0, but it is represented in the settings menu.
Click to expand...
Click to collapse
I'm installing it now, just waiting for it to boot, though it seems to be taking forever, and I can't connect to adb for logcat.
Does it take > 30mins or so at first boot? Did you use CWM or TWRP recovery? Anything else that needed doing to get it to work?
TIA
babelmonk said:
I'm installing it now, just waiting for it to boot, though it seems to be taking forever, and I can't connect to adb for logcat.
Does it take > 30mins or so at first boot? Did you use CWM or TWRP recovery? Anything else that needed doing to get it to work?
TIA
Click to expand...
Click to collapse
I remember first boot was extremely slow, but if it was 20 min or one hour I can't tell. I was multitasking! [emoji12]
ahoj79 said:
I remember first boot was extremely slow, but if it was 20 min or one hour I can't tell. I was multitasking! [emoji12]
Click to expand...
Click to collapse
I will be more patient then :fingers-crossed:
babelmonk said:
I will be more patient then :fingers-crossed:
Click to expand...
Click to collapse
So the 20150327 doesn't work for me at all. The 20150323 does, with the minor issues mentioned above.
Does anyone else see the VOOC charging not work? Any clues as to how to enable it?
does it work for chinese n3 also ??
zohaer21 said:
does it work for chinese n3 also ??
Click to expand...
Click to collapse
Yes, but it will break your proximity sensor.
babelmonk said:
So the 20150327 doesn't work for me at all. The 20150323 does, with the minor issues mentioned above.
Does anyone else see the VOOC charging not work? Any clues as to how to enable it?
Click to expand...
Click to collapse
Actually, I lied, the VOOC charging did work, but wierdly sometimes the light on the charger didn't come on (it still charged quickly).
I've just installed (without wipe) the 20150403 and that works a treat. Only visible change is that screen elements with not standard res'n are now centred rather than bottom-middle aligned.
Loving the CM12 ROM - even battery life isn't much reduced and Lollipop is a great upgrade.
?
Anilexis said:
As you know Cyanogen has released official CM12 nightly builds for Oppo N3 - http://download.cyanogenmod.org/?device=n3
Anyone tried it? What is working and what is not? Are the developers visit here? What to expect from future releases?
Click to expand...
Click to collapse
Guys any updates with the latest nightlies? Is the fingerprint working or any other issues?
why
why I can't Install to my oppo N3 R831K ?
cm12.1 nightlies - nearly, but not quite.
skromnia said:
Guys any updates with the latest nightlies? Is the fingerprint working or any other issues?
Click to expand...
Click to collapse
So I had lots of suspends of death with recent cm12.1 nightlies, but it seems to have calmed down a bit now. Still takes a while for screen to come on after sleep though and reboots on resume maybe twice / three times a day - only when on battery.
No fingerprint support yet - doubt that'll be there until Android M as there's no native Android support for fingerprint sensors in L - Samsung devices have had the Samsung reader backported, so they're golden, but I don't think the OPO / Oppo will get this attention.
The other big gotcha is video - nothing working unless you can get the Oppo ColorOS camera working (I've not tried). Stills are fine though.
I've tried again to get the Oppo camera working, using some of the newer ports to the OPO.
Still no joy
xposed, gravitybox and nova launcher is making ColorOS pretty tolerable though.
After trying many versions from the main thread in op3 forum, I found a version that works best for the nextbit robin. Considering it's running on an 808, decent performance with HDR+ even in low light.
Credits to B-S-G at 4PDA for the mod.
Settings: screenshot
APK: mirror
can't seem to get the decryption key to work.
mlboss said:
can't seem to get the decryption key to work.
Click to expand...
Click to collapse
You probably copied it wrong. Blame xda for not allowing links to be posted. Excluding http prefix seems to work around it.
The version from this post seems to work as well on the latest LineageOS. The "Config camera HDR+" setting should be "Nexus6 (Max = High)".
Arktronic said:
The version from this post seems to work as well on the latest LineageOS. The "Config camera HDR+" setting should be "Nexus6 (Max = High)".
Click to expand...
Click to collapse
Can the HDR+ parameter actually be set to High though? Several versions I tried could only do Medium. The version I posted came directly from the thread on 4PDA.
Yes, the "High" setting works in that build.
Works great so far on AOSPA. Thanks for sharing.
Does this camera have slow motion? I have been trying to find a camera that offers slow motion for the Nextbit Robin. So far I've been unsuccessful. Currently I am stock, but would be open to flashing something like RR or Lineage if its stable and I dont lose any functionality...i.e.. fingerprint reader and everything else works.
I haven't yet seen a version with working slow motion on the Robin. 60fps works, though.
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Arktronic said:
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Click to expand...
Click to collapse
Can you please post a screenshot of your settings page? Thank you.
Any other setting you changed/tried that work well?
The settings I'm currently using are:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
As I understand it, the "Model" selection tweaks certain algorithms that affect the final image, though I haven't seen any definitive explanation for that.
When installing updates to this app, it's often necessary to clear all data for it, or else it may crash.
EDIT: Oh yeah, running latest LOS.
Arktronic said:
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Click to expand...
Click to collapse
Settings I was using
Mode : Pixel XL(corr)
HDR+ : Nexus 6 Hdr+ Auto
ROM : OmniROM
This was working fine for about 10-20 photos in 2-3 days. Until one day(yesterday) suddenly while taking a photo it crashed the app after clicking the image (image wasn't saved). And it kept doing it even after relaunching the app. Odd thing was the same thing kept happening on all camera apps. A reboot fixed it for other camera apps but didn't fix it for this app.
Arktronic said:
The settings I'm currently using are:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
As I understand it, the "Model" selection tweaks certain algorithms that affect the final image, though I haven't seen any definitive explanation for that.
When installing updates to this app, it's often necessary to clear all data for it, or else it may crash.
EDIT: Oh yeah, running latest LOS.
Click to expand...
Click to collapse
After the above happened I cleared the settings before uninstalling and reinstalled this app and used the settings you suggested. Now it doesn't crash but it won't finish the Processing HDR+ thing and never save the image
I have tried changing to various models. I guess I will have to try a few different versions with different settings.
Any suggestion as to how to make the process of finding the right setting & version by trying various versions quick and less time consuming?
Interesting. The crash you described sounds like a hardware or firmware issue. I've not used OmniROM, so I'm not sure what camera APIs they've implemented. I know that there was a period of time when LineageOS had a lot of camera API work done, so that may have affected overall app compatibility. Also, while I hate to suggest this, you might consider doing a factory reset via TWRP, because it sounds like something might have gotten into a bad state since reboots aren't helping.
The best way I've found to play around with the settings isn't particularly great. I pin the app to my home screen for easy access, and do the following:
Launch the Camera app, test it out
Make settings changes
Go back to the main camera screen
Kill the app by hitting the Overview (square) button and swiping it away
Go to step 1
Hope this helps!
I am not sure if its a firmware issue or not because after the reboot other camera apps work properly.
Ha! I guess there is no other good way to test it out.
btw were you able to get burst mode working? I never was able to get it working even when it was working.
I've never seen Burst mode work on the Robin.
I guess for burst mode I will have to go back to my usual camera app.
Anyone got this working on stock?
Nexus 6p would probably be a better choice for the config, it has a 64 bit snapdragon 810. Seems to capture faster than selecting the pixel 2 or nexus 6.
Although I took a comparison HDR shot between open camera (on camera2 API) and this modded camera, open camera had better HDR post processing and didnt take as long to apply the changes. Ill probably keep this modded camera for the panorama though.
Reiyer said:
Anyone got this working on stock?
Click to expand...
Click to collapse
The version that Arktronic posted (latest 5.1.016-based mod from B-S-G) works fine for me in stock 7.0 with the settings:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
I have not tried to play with any other settings, nor tried it in stock 7.1.1.
Hello everyone
I don't always post on XDA i am kinda lurker. Forgive me if i make mistakes. I have oneplus 5t and there is this annoying screen rotation bug that keeps auto rotating though i locked it to portrate, it is not in all apps but some like chrome, gallery, mx player, vidmate, drive and some others. At first i thought it was my phone, restored it to factory defaults and clean installed with OOS 5.1.0 but nothing has changed then i checked my friend's oneplus 5t and it is the same. I think this is a universal oneplus 5t problem. Is there any way to fix this or a 3rd party app that can control screen rotation?
nadiration said:
Hello everyone
I don't always post on XDA i am kinda lurker. Forgive me if i make mistakes. I have oneplus 5t and there is this annoying screen rotation bug that keeps auto rotating though i locked it to portrate, it is not in all apps but some like mx player, vidmate, drive and some others. At first i thought it was my phone, restored it to factory defaults and clean installed with OOS 5.1.0 but nothing has changed then i checked my friend's oneplus 5t and it is the same. I think this is a universal oneplus 5t problem. Is there any way to fix this or a 3rd party app that can control screen rotation?
Click to expand...
Click to collapse
I dont know about the other apps, but mx follows its own rules when it comes to rotation, you should choose the rotation rules in mx settings, to only rotate with system rotation.
bihariel said:
I dont know about the other apps, but mx follows its own rules when it comes to rotation, you should choose the rotation rules in mx settings, to only rotate with system rotation.
Click to expand...
Click to collapse
I know that and i chose the settings but still it is forcing me to auto rotate ?
nadiration said:
I know that and i chose the settings but still it is forcing me to auto rotate
Click to expand...
Click to collapse
I was having the same issue with 5.1.0, I thought I was going mad. I had turned off auto-rotate and phone would be locked and still always turn on in landscape mode. The problem seems to be gone in the latest 5.1.1. update though. I'm assuming your on stock, because that's the only build that was giving me the problem.
blas4me said:
I was having the same issue with 5.1.0, I thought I was going mad. I had turned off auto-rotate and phone would be locked and still always turn on in landscape mode. The problem seems to be gone in the latest 5.1.1. update though. I'm assuming your on stock, because that's the only build that was giving me the problem.
Click to expand...
Click to collapse
Yes i am on stock 5.0.1 and thank you i will update to 5.1.1
Hi I have the same problem. The problem "appeared" when i updated to a crdroid version with the treble update and the new vendor partiton, i was already on a non-stock rom. I also tried to install stock rom but the problem persist. I attach some screenshot of the accelerometer value and based on what I found on internet it seems that the axis X and Y are inverted
This is my first time making a module, so it's probably held together with tape compared to other modules made by competent people.
A simple module, just installs OPCam and needed dependencies. I've only tested this on the Derp A12 ROM, and it works fine.
Macro mode doesn't show up, I've no idea why, if you do, let me know and I'll update it.
DOWNLOAD:
opcam.zip
drive.google.com
CREDITS:@topjohnwu
XTENDED XR-vX.r team as I pretty much just looked through their ROM to see what files they used to get OPCam working.
The app seems to crash when I open the video function, and only when using the normal camera.
It works fine with the selfie camera but the second I switch the app disappears.
Using latest derp. Any advice?
d4m4s74 said:
The app seems to crash when I open the video function, and only when using the normal camera.
It works fine with the selfie camera but the second I switch the app disappears.
Using latest derp. Any advice?
Click to expand...
Click to collapse
I have the same issue, gonna look into it once I've got some free time.
L4WL13T said:
I have the same issue, gonna look into it once I've got some free time.
Click to expand...
Click to collapse
Good luck.
I switched back to oxygen because I was missing some features derp didn't offer, but since you've got the same issue you should be able to test it yourself.
Thanks,
But is it possible to make a zip that is flashable from recovery instead?
Thanks a lot, this is working well. Portrait mode works great as well. I prefer GP over the OOS Gallery app so I disabled it, but everything works great, just had one question. Is this version latest for the 7tpro?
L4WL13T said:
I have the same issue, gonna look into it once I've got some free time.
Click to expand...
Click to collapse
Hey, did you find some time?
The app keeps on crashing for me
Running it on a Oneplus 8 Pro with Lineage OS 19.1