Develop Bugs

HOWTO: Install Windows 10 for Phones on Non-supported devices (and other hacks)

This is only confirmed working for the AT&T Lumia 1520 and may work as is for other phones but also might require tweaks to the XML (see below). It is very possible to brick your phone with this. Your mileage may vary!
From a high level this works by using FiddlerCore to intercept the traffic going to the Microsoft WPflights server that controls the Insider app and responds with our own custom data. The app accepts registry editing information from the web responses and acts upon that. This allows us to write stuff to select locations in the registry. In the case of the Windows 10 Preview, it appears to only look for your phone's PhoneManufacturerModelName to decide if it should be offered previews. Windows Update also checks this value. Other devices like Samsungs or HTCs may need different settings. My phone did revert to it's factory values after Windows 10 was installed (I actually think it might have done it after Windows 8.1 was installed but it continued with 10 nonetheless).
1. For the Lumia 1520 (and other phones?) reset your phone using the Windows Phone recovery tool. I recommend not logging in and setting everything up yet and just waiting til the end and doing a reset and letting it restore after you’re on Windows 10. This may not be required for your device but most likely is due to the space issue cited by Microsoft. You can see your available space in the About menu of the Windows Insiders app. Before resetting mine was ~200mb and after it was ~600mb. You can try without resetting but may get an error after it tries to download and install the update.
2. Install the [url=http://go.microsoft.com/fwlink/?LinkId=522524]Windows Insider app on your phone (you will need to have a store account configured)
3. Open the insiders app and go to the about options in the app bar and screenshot/make notes/email the settings to yourself. You may need this later.
4. Download and extract the WPInsidersHacks app (attached to this post) to your computer
5. Start the WPInsiderHacks app on pc, approve any firewall requests
6. Connect to the same WiFi that your PC is on. Edit the settings for the WiFi connection to turn on the Proxy and set it to use the PC’s IP address and enter 8877 for the port
7. Open Internet Explorer on your phone and navigate to http://[pc.ip.add.ress]:8877 where [pc.ip.add.ress] is the IP address of the PC running the WPInsidersHacks app
8. Tap on the link at the bottom to the fiddler root certificate
9. When prompted click open and then install to trust the cert and ok at the confirmation
10. Run the Windows Insider app and tap get preview builds
11. Tap on which custom action you’d like to perform. In my case I hit "Set to ATT Lumia 635" and click the arrow at the bottom
12. Accept the agreement and click the check mark at the bottom. the app will close
13. Now clear your proxy settings and run the insider app again
14. Tap get preview builds and login with your Microsoft account
15. Select the fast branch (if you’re reading this of course you want the fast branch) and click the arrow at the bottom
16. Go into the phone settings and check for updates. With any luck you should have Windows 10 there for you to install. On my AT&T 1520 it had to do 8.1 first but it kept going to 10 after 8.1 installed (had to check for updates again)
17. You’ll probably want to go into the settings and do another reset and then log into the phone and let it restore your previous data
The Windows Insider options are populated from the WPFlights.xml file. Feel free to edit/add stuff. I've experimented with writing to other keys but had mixed results. I wasn't able to write to the Software\Microsoft\Settings\{1DEF9B7D-2322-40eb-A007-16A75D5CDA6F} for example (seemed to not like the curly braces?). It should have all the same permissons as the preview for developers app. You'll just need to run the WPInsiderHacks app on your PC and point your phone's proxy settings to it if you want to go back and set something again (such as enabling tethering).

I just used this to install the TP on my Lumia 930 and .. it worked like a charm! phone is booting, OS is working! Thank you very much for the work you put into this! Really excited to try out the Preview now..
Edit: I did change the target device ID from ATT though.
Confirmed working for the Lumia 930
Confirmed working for the Lumia 920

I will try tomorrow on Lumia 520 and post result.

Not working on my Lumia 535
tried it on a Lumia 535. After Setting no proxy again the Windows Insider app shows that there is no update available.
the about-setting Shows RM-975 correctly instead of RM-1089, but I think the FW Version needs to be changed too.
Does anyone know a fix? Tried it several times by now.

LogString: DefaultCertMaker: GetRootCertificate() did not find the root in t
he Windows TrustStore.?

error0x0000034 said:
tried it on a Lumia 535. After Setting no proxy again the Windows Insider app shows that there is no update available.
the about-setting Shows RM-975 correctly instead of RM-1089, but I think the FW Version needs to be changed too.
Does anyone know a fix? Tried it several times by now.
Click to expand...
Click to collapse
Which carrier are you on? Sometimes you have to use device information for a phone on the same carrier as you're on for it to work.

I tried this with both a 520 and a 920. Everything works fine until I tap Get preview builds. I get the no builds message, but I know it's using the proxy because the WPInsiderHacks window gives this message:
** LogString: !SecureClientPipeDirect failed: System.IO.IOException Authenticati
on failed because the remote party has closed the transport stream. on pipe to (
CN=login.live.com, O=DO_NOT_TRUST, OU=Created by http://www.fiddler2.com)
** LogString: !SecureClientPipeDirect failed: System.IO.IOException Authenticati
on failed because the remote party has closed the transport stream. on pipe to (
CN=sn3301.storage.live.com, O=DO_NOT_TRUST, OU=Created by http://www.fiddler2.co
m)
Click to expand...
Click to collapse
Both devices get exactly the same result.
EDIT: I should clarify something: both the 920 and the 520 get this script. The 920 differs a bit on the device itself. Instead of going directly to the no builds page, an error pops up that says:
Server error
A connection error prevented us from downloading programs for you. Please check the date/time of your device and its network connection and try again.
Click to expand...
Click to collapse

Lumia 920
OK certificate installed
Windows insider no change ?

What would the registry entry for MOID be?
I have a non AT&T carrier, and I want to change that entry to be AT&T

Tried it on my Lumia 530 don't work i get we weren't able to find a preview build for you please confirm

Working fine on my 920 now.

I just installed. Working fine here on my Lumia 720.

For those asking, I've found you absolutely have to modify the WPFlights.xml PhoneManufacturerModelName to one that matches the carrier your device is from. In my case, I have a //Build/ (Rogers Canada) Lumia 920, and a Hong Kong unlocked 620 & 1520.
I managed to spoof the build check by using the following:
Unlocked/Hong Kong: RM-1027_1007
Rogers/Canada: RM-985_1004
http://twitter.com/stroughtonsmith/status/566460948291260417
Also, wiping the devices first /with the Windows Phone Recovery Tool/ (not Reset in Settings->About) for the most part isn't optional; only the 920 for me had enough space to install without doing that
Hope this helps

stroughtonsmith said:
For those asking, I've found you absolutely have to modify the WPFlights.xml PhoneManufacturerModelName to one that matches the carrier your device is from. In my case, I have a //Build/ (Rogers Canada) Lumia 920, and a Hong Kong unlocked 620 & 1520.
I managed to spoof the build check by using the following:
Unlocked/Hong Kong: RM-1027_1007
Rogers/Canada: RM-985_1004
http://twitter.com/stroughtonsmith/status/566460948291260417
Also, wiping the devices first /with the Windows Phone Recovery Tool/ (not Reset in Settings->About) for the most part isn't optional; only the 920 for me had enough space to install without doing that
Hope this helps
Click to expand...
Click to collapse
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.

ajay003 said:
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.
Click to expand...
Click to collapse
You just need to change the phonemanufacturermodel to whatever phone that supports windows 10 from your carrier/region.

ajay003 said:
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.
Click to expand...
Click to collapse
The line in the screenshot is what you'd need to change; nothing too complicated, but finding a valid model for your phone's carrier is the hard part (took me a lot of Googling to find the two I needed), hence why I posted mine

stroughtonsmith said:
The line in the screenshot is what you'd need to change; nothing too complicated, but finding a valid model for your phone's carrier is the hard part (took me a lot of Googling to find the two I needed), hence why I posted mine
Click to expand...
Click to collapse
Not working for me. I'm having Lumia 920 and the carrier rom is RM-821_apac_australia_new_zealand_218. Here's my file attached. Am i doing something wrong?

What exactly did you google ? because the i am with is Telstra in Australia they have a prepaid Nokia Lumia 635 so where would i get the PhoneManufacturerModelName ?

German, Unlocked 830: RM-984_1002
For googling help: some forums automatically include the model variant in signatures of members, I just started with RM-984_10XX for 830 and tried increasing numbers for XX in order to find one that was posted a lot on german forums. Good luck!

ajay003 said:
Not working for me. I'm having Lumia 920 and the carrier rom is RM-821_apac_australia_new_zealand_218. Here's my file attached. Am i doing something wrong?
Click to expand...
Click to collapse
Yeah, you just placed RM-821_apac_australia_new_zealand_218 into the XML - that's your existing device. You need to use the correct form for a 63x/730/830 on same carrier, not your existing 920. That's the hard part to find.
My 1520 was "RM-937_apac_hong_kong_222", which I substituted for "RM-1027_1007" (a Hong Kong Lumia 636) - from what I could tell it doesn't need the "apac_hong_kong" part, but it needs the valid number at the end, and I don't know an easy way to find out what that should be (took me 50 mins of Googling to find that one).
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
th0mas96 said:
German, Unlocked 830: RM-984_1002
For googling help: some forums automatically include the model variant in signatures of members, I just started with RM-984_10XX for 830 and tried increasing numbers for XX in order to find one that was posted a lot on german forums. Good luck!
Click to expand...
Click to collapse
lmfao. I was far too lazy to try bruteforcing it, but again, that's why I posted my working ones!

[Lumia 925] Cannot upgrade using Windows insider

Dear,
A few months ago, I've upgraded my Lumia 925 to Windows 10 (preview) using Windows Insider: it went smoothly.
I decided to go back to WP8.1 using the Lumia Recovery Tool.
Today, I tried to update (again) to one of the Windows 10 previews, but I'm unable to upgrade: no updates found.
I know MS decided to exclude Lumia 925 to Windows 10 final: but: is there any possibility to upgrade to one of the developer previews?
When I download Windows Insider, I select fast ring: no updates are found (my account is enabled for developer previews).
Is this normal behaviour? I also tried to edit the registry to get Windows 10 redstone: unable to update: Update is downloading but when I try to install: unable to open update it says.
Any thoughts?
Thanks!
Pieter

No one?

cyberbozzo said:
No one?
Click to expand...
Click to collapse
If I could help dude I would , recently moved from android to windows phone and can say the community bad, ignorance seems to be a major player. I can kinda see why the app developers don't want create any or port any over.

use release preview ring

Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cyberbozzo said:
Dear,
A few months ago, I've upgraded my Lumia 925 to Windows 10 (preview) using Windows Insider: it went smoothly.
I decided to go back to WP8.1 using the Lumia Recovery Tool.
Today, I tried to update (again) to one of the Windows 10 previews, but I'm unable to upgrade: no updates found.
I know MS decided to exclude Lumia 925 to Windows 10 final: but: is there any possibility to upgrade to one of the developer previews?
When I download Windows Insider, I select fast ring: no updates are found (my account is enabled for developer previews).
Is this normal behaviour? I also tried to edit the registry to get Windows 10 redstone: unable to update: Update is downloading but when I try to install: unable to open update it says.
Any thoughts?
Thanks!
Pieter
Click to expand...
Click to collapse
Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I need help too, root tool and vcreg don't install for xap deployer (error menssage) CustomPFD need SD card, so this are hard to solve, I've used wpinternals too to edit the registre file !!!!!!!
Some one in this FORUM PLEASE HELP US !!!!!!!!!!!!!!

r_x4 said:
Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I need help too, root tool and vcreg don't install for xap deployer (error menssage) CustomPFD need SD card, so this are hard to solve, I've used wpinternals too to edit the registre file !!!!!!!
Some one in this FORUM PLEASE HELP US !!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hey out there !
Upgrading to W10M works actually !!
Yesterday i upgraded my 925 from 8.1 Denim to W10M 10.0.14393.89
In Short:
All you need is the same 8.1 Firmware (.ffu)-File as is installed on your Phone.
Grab your FW on lumiafirmware Site
You need WP Internals 1.2 to unlock Bootloader and enable the Root access.
-YOU DIDN´T need Root-Tool and vcreg and all the other Stuff, ONLY WP Internals !!
Reboot Phone
After that, you must Boot your Phone via WP Internals into the Storage Mode
On PC open regedit and point to your Phone, called MainOS
In Regedit, you load the Registry of your Phone and do some Hacks and write the registry back to Phone
Reboot your Phone, go to MS Store and download Windows Insider App, start it and register for the Insider programm.
All done, you can use the fast ring, Slow ring and Preview .
If you wish, i can do a complete tutorial here !
Cya

http://forum.xda-developers.com/win...le/installing-windows-10-mobile-tech-t3431454
visit this.

Broken phone
Ok people... Process failed after tried flashing the FFU and guess what? phone doesn't boot anymore, keeps on looping.. when i try the down and power botton and then down again, i get the gear screen but either it gets stuck there or it gives me a bad face.. non of the relative software (WPinternals - Windows Device Recovery) recongize the phone. I guess it's pretty dead, any ideas on what can i do??

aris7la said:
Ok people... Process failed after tried flashing the FFU and guess what? phone doesn't boot anymore, keeps on looping.. when i try the down and power botton and then down again, i get the gear screen but either it gets stuck there or it gives me a bad face.. non of the relative software (WPinternals - Windows Device Recovery) recongize the phone. I guess it's pretty dead, any ideas on what can i do??
Click to expand...
Click to collapse
With the phone turned off, press and hold "volume up" + "power". Keep pressing them until you see a lighting with a gear. From there, flash using "Windows Phone Image Designer".

Updating lumia 1320 to windows 10

I had some recent problems with the battery on the latest cumulative of windows 10 mobile. So I wanted to restart fresh and I downgrad it to windows phone 8.1 . I forgot that now i can't update the phone to windows 10 mobile with windows insider app any more. Can someone give me a tutorial to how to get to windows 10 now ? My phone has an sd card , I read that you can if you have an sd card. Please help..

EmanuelManole said:
I had some recent problems with the battery on the latest cumulative of windows 10 mobile. So I wanted to restart fresh and I downgrad it to windows phone 8.1 . I forgot that now i can't update the phone to windows 10 mobile with windows insider app any more. Can someone give me a tutorial to how to get to windows 10 now ? My phone has an sd card , I read that you can if you have an sd card. Please help..
Click to expand...
Click to collapse
Hi, were you able to upgrade to Windows 10 Mobile. If not let me know, i will provide the complete walkthrough with all supporting files needed.

shahidkazi said:
Hi, were you able to upgrade to Windows 10 Mobile. If not let me know, i will provide the complete walkthrough with all supporting files needed.
Click to expand...
Click to collapse
I have to figure it out, thank you!

EmanuelManole said:
I have to figure it out, thank you!
Click to expand...
Click to collapse
Sorry a little confused .. did not understand what you meant. I can post the steps if you want. I just upgraded mine today to 14393.321 from WP 8.1

shahidkazi said:
Sorry a little confused .. did not understand what you meant. I can post the steps if you want. I just upgraded mine today to 14393.321 from WP 8.1
Click to expand...
Click to collapse
Sorry for my bad english , i had figure it out * . Whit what registry values did you changed?

EmanuelManole said:
Sorry for my bad english , i had figure it out * . Whit what registry values did you changed?
Click to expand...
Click to collapse
No worries.. I used the following
PhoneManufacturerModelName = RM-1089_1087
Phone Operator Name = 000-DE
Phone Model Name = Lumia 735
I found this model to be closest to 1320 in terms of internal hardware specs and the build is far more stable.

Thanks
shahidkazi said:
No worries.. I used the following
PhoneManufacturerModelName = RM-1089_1087
Phone Operator Name = 000-DE
Phone Model Name = Lumia 735
I found this model to be closest to 1320 in terms of internal hardware specs and the build is far more stable.
Click to expand...
Click to collapse
Thank you, it worked perfectly!!

Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?

Inarus said:
Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?
Click to expand...
Click to collapse
I update often with insider windows to build (not Redstone) and then I unlock.
I then apply these settings to get the Redstone build.
You can try this >>http://forum.xda-developers.com/win...-interop-unlock-root-wp8-8-1-windows-t3450239
Or to manually unlock creating your own rom >>http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
Sorry I have no time to upload my custom rom
Sorry my bad english.

Inarus said:
Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?
Click to expand...
Click to collapse
I did the following:
1. Restored to 8.1 with WDRT (Windows Device Recovery Tool)
2. Disable automatic app updates from Store (to prevent extras+info from updating)
3. Unlocked bootloader using WPInternals
4. Unlocked phone using Developer Phone Registration
5. Deployed custom pfd xap
6. copied mixradio vcgreg bootstrap to sd card root folder (mixradio is available if you recover using WDRT), or else you can stick to extras+info bootstrap
7. Executed CustomPFD to deploy vcreg via the mixradio bootstrap
8. Once vcreg was installed, go to settings do Interop Unlock
9. Change the registry settings to have the phone as Lumia 735 (check my post above)
10. Install Windows Upgrade Advisor and execute it
11. It will detect the phone as 735 and schedule updates
12. Go to updates and install update (The first update will take you to windows 10 build 10586 (TH1).
13. Check for updates again (you will get an update for the Anniversary Update)
Recommended to install the Anniversary Update. It has been by far the most stable version for 1320 (for me atleast).
Let me know if you have any other issues.

Thank you very much, but I have not been succesful.
llucas_br: I tried it many times but it does not work for me. I am stuck at 9) because i am unable to replace the app. It seems to be installed not on SD card. I tried Insider preview instead and no luck.
shahidkazi: Well, I stucked on 5). Do you really mean custom pfd or it shoudl be customWP? If custopWP I have the same problem as mentioned...
And after WDRT I do not have Mixradio app :/ (iam using this firmware: RM994_3058.50000.1424.0003_RETAIL_eu_hungary_1156_03_445314_prd_signed.ffu)

I am guessing the file image for the model from hungary does not have mixradio. You may want to look for the extras + info bootstrap. maybe @emanuelMode can post the xap here for you to try bootstrapping with it instead
Adn yes you were right, i meant custom wp system (which is used to apply the bootstrap)
custom pfd is a registry editor which i generally use to edit registry after doing the interop unlock via vcreg. It makes it easier to edit the registry values.
Were you able to unlock boot loader using WP internals?

Try deploy this xap
Inarus said:
Thank you very much, but I have not been succesful.
llucas_br: I tried it many times but it does not work for me. I am stuck at 9) because i am unable to replace the app. It seems to be installed not on SD card. I tried Insider preview instead and no luck.
shahidkazi: Well, I stucked on 5). Do you really mean custom pfd or it shoudl be customWP? If custopWP I have the same problem as mentioned...
And after WDRT I do not have Mixradio app :/ (iam using this firmware: RM994_3058.50000.1424.0003_RETAIL_eu_hungary_1156_03_445314_prd_signed.ffu)
Click to expand...
Click to collapse
Extract, and deploy.
Good luck

Hi,
shahidkazi: that did not work....
llucas_br: I was unable to deploy because lack of interpol unlock...
So I downloaded Indian firmware with Mixradio (RM994_3058.50000.1424.0_RETAIL_im_india_906_03_482446_prd_signed), flashed and it all work Now I am updating 8.1 to be able to update to 10
Thank you very much

Inarus said:
Hi,
shahidkazi: that did not work....
llucas_br: I was unable to deploy because lack of interpol unlock...
So I downloaded Indian firmware with Mixradio (RM994_3058.50000.1424.0_RETAIL_im_india_906_03_482446_prd_signed), flashed and it all work Now I am updating 8.1 to be able to update to 10
Thank you very much
Click to expand...
Click to collapse
Great. Enjoy
Additional Tip:
After upgrading to Windows 10, the phone will still remain as Lumia 735 or any other model that you spoof it to with the registry hack. Keep it the same to get future updates.
In case you have to reset your phone for some reason, it will go back to being Lumia 1320, in that case, simple deploy VCReg 1.5 for Windows 10 using app deploy, interop unlock and change it back to Lumia 735.
I may be wrong or just superstitious but keeping it as Lumia 735 and not 1320, the freezing issue is less frequent.

shahidkazi said:
I did the following:
1. Restored to 8.1 with WDRT (Windows Device Recovery Tool)
2. Disable automatic app updates from Store (to prevent extras+info from updating)
3. Unlocked bootloader using WPInternals
4. Unlocked phone using Developer Phone Registration
5. Deployed custom pfd xap
6. copied mixradio vcgreg bootstrap to sd card root folder (mixradio is available if you recover using WDRT), or else you can stick to extras+info bootstrap
7. Executed CustomPFD to deploy vcreg via the mixradio bootstrap
8. Once vcreg was installed, go to settings do Interop Unlock
9. Change the registry settings to have the phone as Lumia 735 (check my post above)
10. Install Windows Upgrade Advisor and execute it
11. It will detect the phone as 735 and schedule updates
12. Go to updates and install update (The first update will take you to windows 10 build 10586 (TH1).
13. Check for updates again (you will get an update for the Anniversary Update)
Recommended to install the Anniversary Update. It has been by far the most stable version for 1320 (for me atleast).
Let me know if you have any other issues.
Click to expand...
Click to collapse
please take a video
please

Arshen said:
please take a video
please
Click to expand...
Click to collapse
Video would be a little difficult with a lot of kids at home (they wouldnt let me even breathe in peace ), but i will try and get you a guide with screenshots and relevant files, so you can use it to get to Windows 10 Mobile

shahidkazi said:
Video would be a little difficult with a lot of kids at home (they wouldnt let me even breathe in peace ), but i will try and get you a guide with screenshots and relevant files, so you can use it to get to Windows 10 Mobile
Click to expand...
Click to collapse
i change regedit to 735
install windows upgrade
windows upgrade messaged "Ready to upgrade, Go to Phone update..."
but when go to Phone update in setting, and check for update messaged "your phone is up to date"!!!!
next install insider and get build, but messaged "A connection eeror orevented us from downloading program for you. Please check the date/time of your device and it's network connection and try again."
why? (
help me

Arshen said:
i change regedit to 735
install windows upgrade
windows upgrade messaged "Ready to upgrade, Go to Phone update..."
but when go to Phone update in setting, and check for update messaged "your phone is up to date"!!!!
next install insider and get build, but messaged "A connection eeror orevented us from downloading program for you. Please check the date/time of your device and it's network connection and try again."
why? (
help me
Click to expand...
Click to collapse
It could be some registry setting wrong or you may have Extras + Info installed.
I have created a complete step by step walkthrough with screenshots, you can check what you may have missed.
Link - http://shahidkazi.blogspot.in/2016/11/upgrade-lumia-1320-to-windows-10-mobile.html

TH2 Lumia 1320
shahidkazi said:
Great. Enjoy
Additional Tip:
After upgrading to Windows 10, the phone will still remain as Lumia 735 or any other model that you spoof it to with the registry hack. Keep it the same to get future updates.
In case you have to reset your phone for some reason, it will go back to being Lumia 1320, in that case, simple deploy VCReg 1.5 for Windows 10 using app deploy, interop unlock and change it back to Lumia 735.
I may be wrong or just superstitious but keeping it as Lumia 735 and not 1320, the freezing issue is less frequent.
Click to expand...
Click to collapse
If I get W10 TH2 on my Lumia 1320, and reset the phone, did it automatically changes the register to show it is a 1320 again? And only receive the last TH2 to the Lumia 1320? Sorry 4 my english Thank you

[pls help] Update from 10586.107 to 10.393.67 allways throws error 0x80070020

1st,
I know there are some threats concerning this issue, but did not found the right hint.
I was going forward and back, again and again - also by offline update, which went well only for the 1st stage:
-1st stage to 10586.107
-2nd stage, only found the cab links for 10586.962 full
but this did fail with same error, does not matter if starting from 8.1 or from 10
Lastly have completly gone back to original ffu 8.1 and than went forward only by using MS-servers...still always the same error <initial download works, then the preparation and install procedure as well, but shortly before 100% the error shows up>
My device should be supported, but later I even spoofed for an RM-1085 from which were used the obviously right boot loader files...I did this before knowing of the log output thought it has to do with lifecycle of the product
pls refer to attached update/install log @the last third - saying there are collisions (0x80070020 - ERROR_SHARING_VIOLATION) and not found files (iot device relelateds?).
Would be fine if someone could inspect the log - escpecially one of the build collector cracks

maybe to try online update or update over USB?
on 10586 make hard reset
enable developer settings and device portal
install Interop Tools https://forum.xda-developers.com/showpost.php?p=74628972&postcount=1071
make interop unlock
change registry to any W10M device (depend did you want AU or FCU), for AU use x30 device, for FCU use x50
now use online update or tool for update over USB https://www.microsoft.com/en-us/download/confirmation.aspx?id=56726
i always do n this way and never have any problem for old 8.1 lumia devices.... but i not recommend upgrade to FCU because AU work much better with old devices

you made my day dxdy
:good::good::good:
can't enough thank you...I will achieve this by pinning your advises onto the wall
not a word too much...this is so useful!
I think I had not the best packages and from now on I do not use "iutool"; the "OtcUpdater" seems so much more reliable - only it is hard to find which packages the files are representing (name scheme)
Also I'll do make hard resets even directly after flashing an full ffu
...will follow your suggestion to stay on AU; currently 14393.1066 - all updates by offline mode
so, :good::good::good:

[GUIDE] Install Windows 10 mobile on a Nokia Lumia 530 (post-discontinuation friendly)

While the Nokia Lumia 530 isn’t officially supported, it’s still possible to get Windows 10 mobile running on it. At the time of writing, it has become a bit tricky to get it to work, since most official Microsoft tools are discontinued and will therefore not work. I will be linking the files which I’ve used. The credits to the people who made or shared the tools and guides I used will be at the bottom of this guide.
Note that I am not responsible for any damage made. Proceed at your own risk!
Prerequisites:
- A Nokia Lumia 530 running the Windows 8.1 Denim Update (will be referred to as "device")
- A stable Windows 7 system or VM, with .NET Framework 4.5.x or 4.6.x (on Windows 10, the IUTool will fail to synchronize, hence this requirement)
- An internet connection that can handle a download of approximately 2GB data on the computer and about the same on the phone
- A good USB cable (a flimsy one with a loose fit could brick the device while it’s updating)
- The programs linked below
First part of the installation:
1. Make sure the device is fully charged. If it’s not fully charged the device could get (soft-)bricked.
2. Factory reset the device, so you have as much storage as possible available on the device. After the reset is done, leave it at the language selection screen, because it doesn’t do anything there.
3. Extract HCTSW_WXMSOUP_V5.3beta6.update.lzma2.7z with 7zip or whatever you prefer.
4. Download the Visual C++ libraries from here: https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ and run the install script.
5. The next thing you are going to do is download the updates, push them to the device and install them. This will take some time, but it depends on your internet connection for the most part. The files will be downloaded from the official Microsoft servers. Now here’s what to do: open run_en.cmd and follow the steps. These are pretty clear, so I don’t think I need to point all of them out here. It will open a webpage where you can download WDRT, you will need to install that for the tool to work.
6. Now you can move on to the second part.
Second part of the installation:
In this part of the installation, you will be updating the device from version 1511 to the latest available build, which should have a working Microsoft store.
1. The setup of the device. The version that just got installed doesn’t have a lot of options yet, including language packs. If you have a device that’s not English United States, the keyboard will bug out on setup, because it’s trying to access a language pack that doesn’t exist. Therefore, the first step, setting the language should be English (United States), so the OS itself won’t bug out. Once you’ve set the language (it will prompt to reboot, do that), you can go through the rest of the setup. Don’t log it into your Wi-Fi, don’t log it into your Microsoft account and don’t turn on automatic app updates. It’ll say it needs to set up apps, that takes some time but eventually you’ll get to the home screen. Now is when you need a few tools, which brings us to step 2.
Now is a good moment for me to point out that, if you have a non-English-US device, the keyboard for another language is still "installed". It can be removed by holding it in settings -> time and language -> keyboard and choosing “Delete”.
2. Installing Interop Tools. In order to get updates, you’ll need to modify your device a bit. This won’t be very hard, but it involves some registry modifications so you’ll have to pay close attention.
Go to settings -> update and security -> for developers and enable developer mode, so you can sideload the Interop Tools (Linked below). Copy the contents of the Interop Tools zip to the device first. Then, go to the file manager on the phone and go to the directory where you put the files. INSTALL THE DEPENDENCIES IN THE \ARM FOLDER FIRST, THEN THE INTEROP TOOLS FILE ITSELF! Check if the Interop Tools installed on the “all apps screen” and get ready to open it.
3. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
3.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Then, put PhoneManufacturerModelName in the “Registry Value Name” box and tap the “Read” button at the bottom. You’ll see some text appear in a box. This will need to be edited to the following value: RM-1089_1048. After you did that, tap the “Write” button.
3.2. Now put PhoneModelName in the the “Registry Value Name” box and tap “Read” again. Now change the value to Lumia 535 and tap “Write”.
3.3. Exit out of Interop Tools and go to the next step.
4. Logging in to the Wi-Fi and checking for updates.
4.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
4.2. Checking for updates. This is the part that always went wrong with me, because of storage limits (gotta love that 4GB eMMC). But if I’ve explained this well enough, you might not have to do a lot of weird stuff. Oh well, to the instruction we go. Go to settings -> update and security -> windows update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got two updates: from 1511 to early 1607 and from that to late 1607. Maybe you can get a newer version with WDRT or OTC but I doubt that to be honest.
Hooray! Now you should have a fully functional Nokia Lumia 530 with Windows 10 mobile!
Credits:
nemesis from Realmtech (for the registry changes) (https://www.realmtech.net/user/1)
@hikari_calyx (for the semi-offline update tool)
@STALKER18 (for the tips on how to clear storage)
@gus33000 (for the Interop Tools)
My dad (for the device)
Everyone who encouraged me to do this mod
Files:
Interop Tools: https://forum.xda-developers.com/attachments/interoptools_rc2_1-9-400-0_arm-zip.3995811/
And it's dependencies: https://forum.xda-developers.com/attachments/dependencies_arm-zip.3995814/
Windows 10 mobile semi-offline updater: https://forum.xda-developers.com/attachments/hctsw_wxmsoup_v5-3beta6-update-lzma2-7z.4955261/
PS: If you brick the device, the WDRT can restore it. If it just puts it in flashing mode, you can use Windows Phone Internals to download and flash a ROM. That tool can be found here: https://www.wpinternals.net/index.php/downloads/doc_download/46-wpinternals-2-8-zip

[ADDITION] Updating from build 1607 to 1709.
I said it wouldn’t be possible and it would break stuff, but I tried it and it doesn’t break anything some people say it might break. Yeah, it might impact on battery life a bit, but nothing has broken for me (yet), it has only improved.
I’ve learned that the update from 1607 to 1703 is the hardest one yet, but you should be able to get it going. This is because the preinstalled Store in 1607 can connect to the app update servers, but it can’t view the app. This is a difficult situation because many apps will become very large when they get updated. You need to figure out for yourself what gets you the space you need, but I found that uninstalling all the apps that can be uninstalled and deleting system apps through MTP (which can be done by bootloader unlocking, rooting and booting into mass storage mode with Windows Phone Internals (I recommend that you only delete OneNote, SkyDrive (as it’s being referred to in /data/program files/windowsapps) and the Xbox app).
Step 0: you might want to factory reset first
Let’s get to the updating though…
1. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
1.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Now do the exact same as you did before, except use these “registry value names” and put the corresponding information into the box below that. Don’t forget to tap write!
Values you should use:
PhoneHardwareVariantRM-1104PhoneManufacturerMicrosoftMDGPhoneManufacturerModelNameRM-1104_11210PhoneModelNameLumia 950
1.2. Exit out of Interop Tools and go to the next step.
2. Logging in to the Wi-Fi and checking for updates.
2.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
2.2. Checking for updates. Go to settings -> update and security -> Windows Update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got 3 updates, one from 1607 to 1703, one from 1703 to 1709 and another one from old 1709 to last 1709.
Credit to @demon2112 for the registry values

Can you backup your efiesp.bin partition and share?

augustinionut said:
Can you backup your efiesp.bin partition and share?
Click to expand...
Click to collapse
Did you break it?
Edit: WPInternals refuses to put the phone in mass storage mode so uh... Yeah...

I managed to get them off with Interop Tools

How?

augustinionut said:
How?
Click to expand...
Click to collapse
In the Interop Unlock menu, there's a mount entire storage option. Copied the EFIESP from there and compiled it into a bin. For WPI the Windows on the phone is too new :/

Thats why didnt worked
I wanted dumped partition with, WPInternals.

augustinionut said:
Thats why didnt worked
I wanted dumped partition with, WPInternals.
Click to expand...
Click to collapse
Yeah that doesn't work. Rename the .bin to .zip, extract, mount the phone in mass storage mode and copy the files to the EFIESP folder/symlink. If you can't do that, WDRT can probably unbreak it

Please anounce me when you can upload the dumped partition.

Is resulting that efiesp.bin , data.bin and mainos.bin are related, so i cant upgrade my phone to windows 10 mobile without them.

augustinionut said:
Is resulting that efiesp.bin , data.bin and mainos.bin are related, so i cant upgrade my phone to windows 10 mobile without them.
Click to expand...
Click to collapse
Just flash the original FFU. Literally all I did is in the guide and I never had to flash something from another device

Thanks, but: my phone was reflashed with reset protection active. Guess what?

augustinionut said:
Thanks, but: my phone was reflashed with reset protection active. Guess what?
Click to expand...
Click to collapse
Something that might work (according to a friend. Again, I am not responsible for a phone that gets rendered useless)
Mount as mass storage, diskpart clean the thing, hold power button for ~10 seconds, flash a bootloader with WDRT (may fail 2-3 times), flash FFU

_Yep, erase clean DPP partition )) buhahahaha

How do you get to the Denim update? I'm getting the error that I am running a build older than 8.10.14219.341 and need to update first.

EirikrHinnRauthi said:
How do you get to the Denim update? I'm getting the error that I am running a build older than 8.10.14219.341 and need to update first.
Click to expand...
Click to collapse
You can download and flash it in WPInternals (will delete all data so back that up first) or WDRT (not sure if that erases userdata)

BennoMP said:
You can download and flash it in WPInternals (will delete all data so back that up first) or WDRT (not sure if that erases userdata)
Click to expand...
Click to collapse
WDRT already says I'm at the latest version of Windows for my device, so that sucks. I shall try WPInternals! Thanks!

Would you please transfer a video of the process?
BennoMP said:
While the Nokia Lumia 530 isn’t officially supported, it’s still possible to get Windows 10 mobile running on it. At the time of writing, it has become a bit tricky to get it to work, since most official Microsoft tools are discontinued and will therefore not work. I will be linking the files which I’ve used. The credits to the people who made or shared the tools and guides I used will be at the bottom of this guide.
Note that I am not responsible for any damage made. Proceed at your own risk!
Prerequisites:
- A Nokia Lumia 530 running the Windows 8.1 Denim Update (will be referred to as "device")
- A stable Windows 7 system or VM, with .NET Framework 4.5.x or 4.6.x (on Windows 10, the IUTool will fail to synchronize, hence this requirement)
- An internet connection that can handle a download of approximately 2GB data on the computer and about the same on the phone
- A good USB cable (a flimsy one with a loose fit could brick the device while it’s updating)
- The programs linked below
First part of the installation:
1. Make sure the device is fully charged. If it’s not fully charged the device could get (soft-)bricked.
2. Factory reset the device, so you have as much storage as possible available on the device. After the reset is done, leave it at the language selection screen, because it doesn’t do anything there.
3. Extract HCTSW_WXMSOUP_V5.3beta6.update.lzma2.7z with 7zip or whatever you prefer.
4. Download the Visual C++ libraries from here: https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ and run the install script.
5. The next thing you are going to do is download the updates, push them to the device and install them. This will take some time, but it depends on your internet connection for the most part. The files will be downloaded from the official Microsoft servers. Now here’s what to do: open run_en.cmd and follow the steps. These are pretty clear, so I don’t think I need to point all of them out here. It will open a webpage where you can download WDRT, you will need to install that for the tool to work.
6. Now you can move on to the second part.
Second part of the installation:
In this part of the installation, you will be updating the device from version 1511 to the latest available build, which should have a working Microsoft store.
1. The setup of the device. The version that just got installed doesn’t have a lot of options yet, including language packs. If you have a device that’s not English United States, the keyboard will bug out on setup, because it’s trying to access a language pack that doesn’t exist. Therefore, the first step, setting the language should be English (United States), so the OS itself won’t bug out. Once you’ve set the language (it will prompt to reboot, do that), you can go through the rest of the setup. Don’t log it into your Wi-Fi, don’t log it into your Microsoft account and don’t turn on automatic app updates. It’ll say it needs to set up apps, that takes some time but eventually you’ll get to the home screen. Now is when you need a few tools, which brings us to step 2.
Now is a good moment for me to point out that, if you have a non-English-US device, the keyboard for another language is still "installed". It can be removed by holding it in settings -> time and language -> keyboard and choosing “Delete”.
2. Installing Interop Tools. In order to get updates, you’ll need to modify your device a bit. This won’t be very hard, but it involves some registry modifications so you’ll have to pay close attention.
Go to settings -> update and security -> for developers and enable developer mode, so you can sideload the Interop Tools (Linked below). Copy the contents of the Interop Tools zip to the device first. Then, go to the file manager on the phone and go to the directory where you put the files. INSTALL THE DEPENDENCIES IN THE \ARM FOLDER FIRST, THEN THE INTEROP TOOLS FILE ITSELF! Check if the Interop Tools installed on the “all apps screen” and get ready to open it.
3. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
3.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Then, put PhoneManufacturerModelName in the “Registry Value Name” box and tap the “Read” button at the bottom. You’ll see some text appear in a box. This will need to be edited to the following value: RM-1089_1048. After you did that, tap the “Write” button.
3.2. Now put PhoneModelName in the the “Registry Value Name” box and tap “Read” again. Now change the value to Lumia 535 and tap “Write”.
3.3. Exit out of Interop Tools and go to the next step.
4. Logging in to the Wi-Fi and checking for updates.
4.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
4.2. Checking for updates. This is the part that always went wrong with me, because of storage limits (gotta love that 4GB eMMC). But if I’ve explained this well enough, you might not have to do a lot of weird stuff. Oh well, to the instruction we go. Go to settings -> update and security -> windows update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got two updates: from 1511 to early 1607 and from that to late 1607. Maybe you can get a newer version with WDRT or OTC but I doubt that to be honest.
Hooray! Now you should have a fully functional Nokia Lumia 530 with Windows 10 mobile!
Credits:
nemesis from Realmtech (for the registry changes) (https://www.realmtech.net/user/1)
@hikari_calyx (for the semi-offline update tool)
@STALKER18 (for the tips on how to clear storage)
@gus33000 (for the Interop Tools)
My dad (for the device)
Everyone who encouraged me to do this mod
Files:
Interop Tools: https://forum.xda-developers.com/attachments/interoptools_rc2_1-9-400-0_arm-zip.3995811/
And it's dependencies: https://forum.xda-developers.com/attachments/dependencies_arm-zip.3995814/
Windows 10 mobile semi-offline updater: https://forum.xda-developers.com/attachments/hctsw_wxmsoup_v5-3beta6-update-lzma2-7z.4955261/
PS: If you brick the device, the WDRT can restore it. If it just puts it in flashing mode, you can use Windows Phone Internals to download and flash a ROM. That tool can be found here: https://www.wpinternals.net/index.php/downloads/doc_download/46-wpinternals-2-8-zip
Click to expand...
Click to collapse

Hello! I followed your step with editing values and after checking updates, there was an update which is Windows 10 Mobile (10.0.14393.1066) as of now, May 2022.
my question is what is the size of this update? and will I able to install this with my Lumia 530?
any other way to install this offline? i really need this update because I need working Microsoft Store.
Thanks...