Related
Hello Everyone I been reading a lot of forums on cases and right now I can't decide on the Spigen, ACase, or the UAG cases. I am looking for a case that protects decently, doesn't add so much bulk, good button access for the home/side buttons. I am extremely careful with my phone and work a corporate job, meaning I don't foresee it needing to be all out tough.
So what you do?
Thanks in Advance
Hi, I was in the same position you were, and wanted a case with not too much bulk, but good protection (just in case by some awful chance I DO drop my phone).
So I went with the Acase Superleggera Pro.
I personally love it. It adds a certain amount of bulk I feel the phone needed, the silicon does not attract dust in my pocket, the polycarbonate back doesn't show smudges or fingerprints much, and the buttons require no extra force to push either.
I have a Zagg Invisible Shield HD on the screen, but am considering removing it because I never scratch my screen (my Droid X STILL doesn't have a scratch on it after two years) and the lip from the case that goes around the phone, PREVENTS the screen from touching the surface when layed face down.
The cut outs for all the ports are perfect, and look great as well. Overall, I suggest the case if these features appeal to you.
However, I'm also buying a Spigen Neo Hybrid to see what all the fuss is about
Thanks for the reply and the info, I am just like you as I really take care of my device. But I just read the review on the ACase the paint is rubbing off? Have you had that happen to you yet?
Blutonic said:
Hi, I was in the same position you were, and wanted a case with not too much bulk, but good protection (just in case by some awful chance I DO drop my phone).
So I went with the Acase Superleggera Pro.
I personally love it. It adds a certain amount of bulk I feel the phone needed, the silicon does not attract dust in my pocket, the polycarbonate back doesn't show smudges or fingerprints much, and the buttons require no extra force to push either.
I have a Zagg Invisible Shield HD on the screen, but am considering removing it because I never scratch my screen (my Droid X STILL doesn't have a scratch on it after two years) and the lip from the case that goes around the phone, PREVENTS the screen from touching the surface when layed face down.
The cut outs for all the ports are perfect, and look great as well. Overall, I suggest the case if these features appeal to you.
However, I'm also buying a Spigen Neo Hybrid to see what all the fuss is about
Click to expand...
Click to collapse
I can't speak for two of the cases you mentioned, but I do have a black UAG case and I really like it. It's actually thinner than I thought it would be and is unique looking, if you like the look of it.
The screen protector it came with is pretty crap and not full coverage. I'm using a Zagg and so far (fingers crossed) it hasn't caused it to bubble up anyplace beyond the few spots I screwed up myself removing my metal bumper case I had picked up when I first got the phone.
How is the Button Issue that you have to hard press on the UAG case?
UlaTek said:
I can't speak for two of the cases you mentioned, but I do have a black UAG case and I really like it. It's actually thinner than I thought it would be and is unique looking, if you like the look of it.
The screen protector it came with is pretty crap and not full coverage. I'm using a Zagg and so far (fingers crossed) it hasn't caused it to bubble up anyplace beyond the few spots I screwed up myself removing my metal bumper case I had picked up when I first got the phone.
Click to expand...
Click to collapse
BEERINAT0R said:
How is the Button Issue that you have to hard press on the UAG case?
Click to expand...
Click to collapse
A little firm to push but nothing to worry about, on mine at least. I have a TPU case that is way harder to push. I saw somewhere (maybe this site) that someone cut one of the long sides of the power button and said it worked great after that. I never had to so YMMV
I had the spigen neo hybrid and sent it back the day after receiving it. I had the same button problem as everyone else although in fairness I don't think I had the revised edition.
I have had my Acase superlegerra pro now for about 5 days and I love it! plenty of grip and not too much bulk. buttons press perfectly and cutouts line up exactly.
I can't comment on the paint coming off issue as I haven't had it for long enough yet.
I am going to send my Spigen Neo back I got last week, buttons are bad on it, must be the non revised version. Seller has no clue and says its the latest stock they have.
twe69 said:
I am going to send my Spigen Neo back I got last week, buttons are bad on it, must be the non revised version. Seller has no clue and says its the latest stock they have.
Click to expand...
Click to collapse
they are pretty poor. I was disappointed cos the case looks good.
the case i have makes it hard to swipe from the edges. anyone have a recommendation of a cool case that leaves some room around the edges of the display?
What case you do you have? my O'Box Commuter makes it difficult but my Griffin Reveal is substantially easier.
kthoag said:
What case you do you have? my O'Box Commuter makes it difficult but my Griffin Reveal is substantially easier.
Click to expand...
Click to collapse
i honestly don't know... its the only one they had at the Verizon store when i got it.
the case does not cover the edges of the display, but i can only see a thin thin line of the bezel between the case and the screen.
I have this one and it's pretty cool, no problems with it.
http://www.amazon.com/SUPCASE-Motor...ie=UTF8&qid=1381348838&sr=1-9&keywords=moto+x
I just got this one today it comes up the sides just to the edge of the screen and doesn't come above it, covers the beloved dimple, but hardly adds any size to the phone to wreck the feel in the hand.
http://www.amazon.com/gp/product/B00EDI7QFM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I also have the below Incipio, better protection but ruined the shape of the phone I couldn't even leave it on a whole day.
http://www.amazon.com/gp/product/B00E4205BE/ref=oh_details_o02_s00_i03?ie=UTF8&psc=1
Steve
BackInA88 said:
I just got this one today it comes up the sides just to the edge of the screen and doesn't come above it, covers the beloved dimple, but hardly adds any size to the phone to wreck the feel in the hand.
http://www.amazon.com/gp/product/B00EDI7QFM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Steve
Click to expand...
Click to collapse
Does this have the "sandpaper" texture to it? It looks exactly like this case, except this one is hard: Amazon, Sandpaper Case
I have this case. Very slim, doesn't have a lip to protect the screen when you set it down but it gives you the edge to edge swipe you want.
http://www.amazon.com/Poetic-Palett...&qid=1383968176&sr=1-1&keywords=moto+x+poetic
I'm using the poetic palette as well.
I like it so far, but I also like the diatonic for the protection, button feel, and lip protection. However, the diatonic feels a bit too fat.
Sent from my XT1058 using Tapatalk
natezire71 said:
Does this have the "sandpaper" texture to it? It looks exactly like this case, except this one is hard: Amazon, Sandpaper Case
Click to expand...
Click to collapse
I wouldn't call it sandpaper but it does have a slightly rough texture.
I think the Anker, Sandpaper, Bear Motion and the Poetic are all the same case with different branding.
BackInA88 said:
I wouldn't call it sandpaper but it does have a slightly rough texture.
I think the Anker, Sandpaper, Bear Motion and the Poetic are all the same case with different branding.
Click to expand...
Click to collapse
I think the Sandpaper one is a hard case though. The Anker is flexible. I'm leaning towards the Anker--but yes. You're correct.
i got the quicksand. same as the anker sandpaper bear motion. it feels great and does not slide on slick surfaces. i think its the perfect case. only downside is it does not protect the glass.
i am giving away a couple of them maybe a few. over on the moto x support forums. go comment with an idea for the phone and get a chance to win it.
https://forums.motorola.com/posts/beb8b24717
Anyone try the Reveal case by Griffin? How does it compare to the SUPCASE monkey082506 had posted a link to earlier in this thread?
Let me state it 1st, I like my N5 naked. It really feels good in my hand, but the hard reality of the world is I will drop it, again. 1st time I was sitting on a chair and put the phone on my leg and I said to myself, take it off your leg because when you stand it it will fly off. And boys and girls what did I proceed to do? You guessed it, I stood up and the phone hit the concrete floor on the right corner and kind of popped open. I squeezed it shut and no harm. Anyway, after that I had been looking for a case and bought I think 3 others. They were all thin and 2 with the clear backs and 1 without, but they all added too much bulk and worst of all for me was the fact when I actually used the phone, something sharp would rub my ear and drive me crazy.
So, I had the following criteria; minimal, no top and bottom covering and had to raise the phone up slightly when I put it down on its face.
Well, the new release Ringke Slim going for around $7.99 is perfect for me. I covers the corners so if I dropped it I feel it would absorb the blow. It's raised just a little so when I lay it down it is off the surface. It has no top and bottom so does not hurt my ear and its cheap! I would of paid pretty much anything for a really good case, but I found it for cheap. I still have to put my glas screen protector on, like I say I really like it naked, and with that on it should be pretty safe.
I can't really see anything being thinner, except maybe just a bumper, but I have not seen one I like. I will be leaving the Slim on my phone.
It's a great case for those of us who like a more professional look with a minimalist form factor and the feel of the naked N5 back with an added grip factor. I'm with you
There is a similar case that's cheaper and believe it or not thinner, albeit minor. Bear Motion. I have 2 and while they are slightly thinner and have very smooth edges unlike the stock rearth slim, they are very slippery in the hand. Too slippery for me.
NX5
The spigen ultra fit and ringke slim are both good minimal cases. You can't go wrong with either.
Sent from my Nexus 5 using Tapatalk
Thanks for the additional case suggestions, I'm going to investigate the Bear Motion. I could not imagine slimmer but the slippery factor may be an issue. The slim is not as nice, to me, as the naked back, but not bad in terms of grip.
Sent from my Nexus 5 using Tapatalk
jackpollard said:
Thanks for the additional case suggestions, I'm going to investigate the Bear Motion. I could not imagine slimmer but the slippery factor may be an issue. The slim is not as nice, to me, as the naked back, but not bad in terms of grip.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yeah when it is new you are correct. How long have you had it? Reason I ask is because after your finger/hand oils get on the case it then becomes very grippy like rubber. At least that has be my experience.
I'd also imagine it can be dependent on where you live and the weather. If it's cold and dry this case could have a little slip to it.
NX5
The Ringke Slim is a terrible case. It scratches the device, sharp corners all over it. Do not recommend it unless you want to scratch your phone.
klin1344 said:
The spigen ultra fit and ringke slim are both good minimal cases. You can't go wrong with either.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yes ultra fit is too tight that it scratches the phones corner
I'm not quite sure it would protect your phone from a drop. There was a post on here not to long ago with a cracked nexus 5. In the picture it was wearing the spigen ultra slim which is very similar to the ringke. The glass screen was cracked at the bottom where it took full force of the fall because there was no protection there.
Sent from my Nexus 7 using Tapatalk
cipsaz said:
The Ringke Slim is a terrible case. It scratches the device, sharp corners all over it. Do not recommend it unless you want to scratch your phone.
Click to expand...
Click to collapse
It's the best case I've used so far. Highly recommended if you want a case that doesn't take away from the look and feel of the N5. I've taken the case off and on over a dozen times and I have no scratches at all on my phone corners. As for the sharp corners of the case, about 30 seconds with a nail file takes care of it
NX5
Isn't Dzitronic swimmer?
GoatsTech said:
I'm not quite sure it would protect your phone from a drop. There was a post on here not to long ago with a cracked nexus 5. In the picture it was wearing the spigen ultra slim which is very similar to the ringke. The glass screen was cracked at the bottom where it took full force of the fall because there was no protection there.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Sure it does. It depends on many factors. How high it drops from, how it lands, what it lands on, etc....
This is a minimalist case with form factor, scratch resistance, and looks as the priority. Not drop protection. If one wants strong drop protection then this case is NOT the one to buy. One should then purchase a thicker bulkier 2 or 3 piece "fat case" like an otter box or similar.
NX5
---------- Post added at 11:28 AM ---------- Previous post was at 11:12 AM ----------
dicecuber said:
Isn't Dzitronic swimmer?
Click to expand...
Click to collapse
No it is thicker
NX5
I agree both the spigen and the ringke scratch the phone but the rinkge is extreme.
Sent from my Nexus 5 using XDA Premium 4 mobile app
dicecuber said:
Yea these cases are probably the worst/cheap cases in spigen/ringke's lineup. Stop making lousy recommendations.
Close this thread please
Click to expand...
Click to collapse
It's really a nice case. Very affordable and adds to the grip of the phone. It also looks and feels like the back of the N5. Before offering advice on a product it would be a good idea to try it first
Sent from my Nexus 7 using XDA Premium 4 mobile app
Not everyone has the scratch problem like you guys have had. I have a Ringke Slim and have never had it damage my phone, and I quite like the case. I also switch between different hardcases often and there are no scrapes in sight.
Also, it's unfortunate dice that you damaged your phone from your drop with a hardcase case on it. But don't criticize a person for recommending one because his good experience differed from yours.
It seems you've got some personal vendetta and drive to go into every hardcase thread and badmouth them.
dicecuber said:
Isn't Dzitronic swimmer?
Click to expand...
Click to collapse
I wouldn't recommend swimming with the Diztronic.
Is the texture matte or glossy on the INSIDE of the case? I only ask because those wet-apply skins get stuck on the glossy cases...
raichur0xx0rz said:
Is the texture matte or glossy on the INSIDE of the case? I only ask because those wet-apply skins get stuck on the glossy cases...
Click to expand...
Click to collapse
Matte finish inside and out
NX5
jackpollard said:
Nope, 55 and just stating the facts, thanks for the comment, appreciate you taking the time out of your day
I'm hoping we can get back on topic, I checked my phone last night and not a scratch or mark anywhere pictures on demand.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Are you using a White or a Black Nexus? I have a feeling that the sides of my white one will end up getting damaged over time with this case, just because that's how glossy stuff is... Regardless, thanks for mentioning the case and it's nice to hear that the interior is matte. I just wish that there was a case similar to the 360 Spigen case that covers the top and bottom as well, and is matte on the inside.
But for now, i guess the Ringke will do.
raichur0xx0rz said:
Are you using a White or a Black Nexus? I have a feeling that the sides of my white one will end up getting damaged over time with this case, just because that's how glossy stuff is... Regardless, thanks for mentioning the case and it's nice to hear that the interior is matte. I just wish that there was a case similar to the 360 Spigen case that covers the top and bottom as well, and is matte on the inside.
But for now, i guess the Ringke will do.
Click to expand...
Click to collapse
I do have the black N5 and the black case, on the black phone you almost have to take a 2nd look to see it has a case. I do like the way on a white case the white would show on the top and bottom. You may be right but, the rubbing of just the day to day may be enough to wear it down. Well good luck in finding a case and let us know what you decide on.
Sent from my Nexus 5 using Tapatalk
jackpollard said:
I do have the black N5 and the black case, on the black phone you almost have to take a 2nd look to see it has a case. I do like the way on a white case the white would show on the top and bottom. You may be right but, the rubbing of just the day to day may be enough to wear it down. Well good luck in finding a case and let us know what you decide on.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I think I'll have to just settle for this one, as every time a company creates a minimal case such as this (like Incipio's feather line), they will always leave the top and bottom exposed.
I'm slightly concerned regarding the buttons being exposed, but I'm sure that since Google has a rev. 2 variant with better buttons, any issues I come across during the warranty period will be addressed.
I remember with my HTC EVO I had left that it in a Seidio Surface case which wrapped around all sides and it still got dents/scuffs/scratches just sitting in the case because of small bits of dirt or something would slip in. Oh well, such is life
DBrand just released its new dragon skin today, and I think it looks incredible. They're also offering 20% off site wide today, so it's a good day to order if you want one. This is my first DBrand skin, so I'll post my thoughts after I get it. I really wish I had the black G6 now, because I think that would have looked even better, but I'm still excited to put it on my platinum version.
Ordered some for myself and my wife as well.
It'll be interesting to see if it actually is grippy since they bragged about that when releasing it.
I like the dragon skin a lot. I was able to get just the pieces to go around the cameras. It was pointless to get front and back because I already have a case covering back (so it wouldn't be seen) and tempered glass on front, which has slots cut out for camera and speaker, so the skin would lay flat.
Poloki said:
I like the dragon skin a lot. I was able to get just the pieces to go around the cameras. It was pointless to get front and back because I already have a case covering back (so it wouldn't be seen) and tempered glass on front, which has slots cut out for camera and speaker, so the skin would lay flat.
Click to expand...
Click to collapse
I got it for the back and the camera. I have tempered glass on the front, but if the skin is as grippy as they say it is, I might use the phone without a case a little bit more...Maybe...I'm also waiting for Best Buy to get the Speck Presidio Grip in stock so I can see how that looks/feels.
Obscure Reference said:
Ordered some for myself and my wife as well.
It'll be interesting to see if it actually is grippy since they bragged about that when releasing it.
Click to expand...
Click to collapse
Yeah, I'm really hoping for some significant grip.
I also bought the dragon dbrand skin for the back and camera. I'm hoping to be able to use it without a case at times when I'm home. Whenever I leave home, the case will always be on it.
Here are a couple pictures I took of the skin on my platinum G6. It isn't as grippy as I thought it would be, but I still really like it.
mhill1986 said:
Here are a couple pictures I took of the skin on my platinum G6. It isn't as grippy as I thought it would be, but I still really like it.
Click to expand...
Click to collapse
Nice! Same feel as their other skins with just another pattern?
Obscure Reference said:
Nice! Same feel as their other skins with just another pattern?
Click to expand...
Click to collapse
Sorry, this is my first DBrand skin, so I can't comment on that. They claim this is their grippiest skin.
mhill1986 said:
Sorry, this is my first DBrand skin, so I can't comment on that. They claim this is their grippiest skin.
Click to expand...
Click to collapse
What's the material like? I was hoping they'd start with a rubberized skin at some point.
Obscure Reference said:
What's the material like? I was hoping they'd start with a rubberized skin at some point.
Click to expand...
Click to collapse
It is so thin, it does not feel rubberized...maybe a tiny bit of tackiness to it. You can feel the texture of it--slightly rough. I guess I might compare it to a textured leather feel. It might add more grip if it went around the sides of the phone, but as is, I don't think it adds a ton of grip, though I am more confident that it won't slide out of my pocket when I'm sitting.
mhill1986 said:
It is so thin, it does not feel rubberized...maybe a tiny bit of tackiness to it. You can feel the texture of it--slightly rough. I guess I might compare it to a textured leather feel. It might add more grip if it went around the sides of the phone, but as is, I don't think it adds a ton of grip, though I am more confident that it won't slide out of my pocket when I'm sitting.
Click to expand...
Click to collapse
Sounds pretty close to their old skins then. Maybe the pattern gives a bit more grip. Looking forward to trying it out when it arrives.
Cheers mate!
DBrand Leather
I just got mine! Leather Back with Matte Yellow Camera. The leather back isn't as grippy as I thought it would be but still better than before.
chanakyashah said:
I just got mine! Leather Back with Matte Yellow Camera. The leather back isn't as grippy as I thought it would be but still better than before.
Click to expand...
Click to collapse
Nice!
I've had their leather skin before and yeah, it's not all that grippy. Neither were their wood or matte either. Sounds like the dragon skin isn't revolutionary either, but it might be a bit better at least.
Looks nice though.
Obscure Reference said:
Nice!
I've had their leather skin before and yeah, it's not all that grippy. Neither were their wood or matte either. Sounds like the dragon skin isn't revolutionary either, but it might be a bit better at least.
Looks nice though.
Click to expand...
Click to collapse
I think I should have gone with Slickwraps, I think the leather feel is more genuine with them.
chanakyashah said:
I think I should have gone with Slickwraps, I think the leather feel is more genuine with them.
Click to expand...
Click to collapse
Well yeah, they've got actual real leather as well. ?
Got mine the other day, pretty nice. Not quite as grippy as I'd hoped but it helps a bit and protects against scratches at least.
Looks good though.
chanakyashah said:
I think I should have gone with Slickwraps, I think the leather feel is more genuine with them.
Click to expand...
Click to collapse
Huge Thanks!
slickwraps said:
Huge Thanks!
Click to expand...
Click to collapse
What's the point now
I'm actually considering removing mine again and just keeping the part for the cameras.
It looks good and provides great scratch resistance but not really that much grip really. In some cases I actually think it's more slippery than the naked glass back. Depends on if your fingers are dry out not I guess.
Still deciding. It makes for a harder fit in some cases as well.
I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .