Hey, i own an israeli H815L G4. Im currently running MM 6.0 , and i want to root my phone so in order to do that I need to downgrade my phone to LP . I have someone who uploaded his v10K rooted img, so all I need is a v10k stock of H815L and I cant find it anywhere. Also, I managed to find some v10H downloads, but none worked. looks like I came late to the party. Another question : If ill install the rooted img v10k I mentioned on my 6.0 MM , what will happen? will it work?
Please help, thanks.
You're In Luck
Hi there, I also own an Israeli LG G4 (H815L) and somehow I still have a H815L v10f kdz (5.1)
I am just notifying you that i am uploading it to a website and I'll PM you the link later
Lucky you, not afraid of loosing your warranty/ don't have a warranty.
TBH, if I knew there was no such defect as "The bootloop problem" i would of rooted my phone too.
you can't know with LG, i heard even a few G5 users got the defect :/
EDIT: You will have to OTA till you reach V10K tho, also, I downgraded once because of battery life issues, and this kdz worked for me.
Uploading right now
Wow! Thank you very much!
Just so you know, my phone died before and the motherboard already replaced once, to a 6xx serial num .. Im not sure the problem wont come back tho, but if it would, Im pretty sure that LG wouldnt even notice that my phone is rooted, since it wont even start-up.. so I'm taking my chances.
A question about needing to OTA to v10k, is it possible? I mean, wont it just "jump" to the most validated version there is ? (using LG Bridge)
Thanks again man .
Nirsassy said:
Wow! Thank you very much!
Just so you know, my phone died before and the motherboard already replaced once, to a 6xx serial num .. Im not sure the problem wont come back tho, but if it would, Im pretty sure that LG wouldnt even notice that my phone is rooted, since it wont even start-up.. so I'm taking my chances.
A question about needing to OTA to v10k, is it possible? I mean, wont it just "jump" to the most validated version there is ? (using LG Bridge)
Thanks again man .
Click to expand...
Click to collapse
Do the OTA through the actual phone, not LG Bridge.
You are correct, LG Bridge would jump you to the most validated version of this country (In Israel it would be V20D, but using kdz you can push officialy to UK V20H or Poland V20I)
But, in OTA, on the actual phone, it will jump you from version to version.
So, from V10F to V10G (you get the point).
Also my internet died on me a few mins ago so i have to restart the upload, so it should be done in an hour approximately. happy to help by the way
Edit: Hopefully i don't fall asleep by then lel. its 1:35 am here XD (Israel time zone is ****ed next to other countries, if you live here, then you probably know that already.)
Related
Last week, LG G3 notified me of software upgrade, I was running 10i at that time. So I went ahead and upgraded. I was expecting to get 10L but somehow it upgraded from 10i to 10J. So now I am running V10J-SEA-XX. I am not able to get OTA update as it shows that I am running the latest version which is not true. It shows last update on 24th Oct 2014. I am in India, phone was purchased from Dubai.
In hope to get 10L, I installed the LG Mobile Software Tool and to my pleasant surprise, it showed me an upgrade. I started the upgrade process, it download 1136.13MBytes of upgrade and started upgrading my phone. It failed in first attempt and it prompted me to remove battery, restart and press retry button which I did.
On Second attempt, everything went smooth, phone was rebooted in the firmware download mode, I could see 0-100% progress and the entire upgrade completed as expected.
However, when phone was restarted, I see that I am still on the same software, V10J-SEA-XX. It even shows last update on 24th Oct 2014 ( OTA date). I restarted LG Mobile Software Tool and it again shown the update available. When I choose to upgarde, it again downloaded the same 1136.13MBytes file. This time upgrade process completed in first time itself. Unfortunately, I am still on the same version.
Any help will be appreciated.
I read on the thread somewhere exactly same issue as yours and someone suggested that u should change your port to 41...
Doa bit of research and u will find the solution !
mustang2012 said:
I read on the thread somewhere exactly same issue as yours and someone suggested that u should change your port to 41...
Doa bit of research and u will find the solution !
Click to expand...
Click to collapse
Well, I saw a few threads, not sure the one you suggested but that solution is possibly applicable if the device was not recognized. Here I could see the progress on both LG tool and mobile so both are communicating fine. Pls correct me if I am wrong.
Anyway, changed the port to COM41 and trying again.
Update: Repeated the entire procedure with COM41. This solution doesn't work. I am still on the same V10J-SEA-XX.
.
Bump...can anyone help?
Thanks
Same Problem
Hi there sorry I can't help but I have the same problem.
Live in the UK but purchased an SEA version. Didn't realise it would cause me such an issue.
Unfortunately, I don't want to root my phone as it will possibly disable my Barclays Bank Mobile Banking app which is pretty useful to me.
My only hope is that LG will upgrade the SEA version to L when it does all the other regions as well.
KaidM said:
Hi there sorry I can't help but I have the same problem. Live in the UK but purchased an SEA version. Didn't realise it would cause me such an issue. Unfortunately, I don't want to root my phone as it will possibly disable my Barclays Bank Mobile Banking app which is pretty useful to me.
....
Click to expand...
Click to collapse
I am fine with rooting if that solves an issue. Any lead?
I just received an OTA update but it only updated to v10K, strangely no v10L yet.
contacted lg
Someone asked lg uae this question and what they have said is that the v10j or which ever one youve got for the region of ur phone is the same as the other regions' v10L or v10n and it isnt more advanced than ur version of v10...
(I cant post links because i am a new user)
Evidence is on the LG UAE twitter @lggulf approx 25 postd down
I live in uae and my g3 updated to 10k today
Hi,
I bought a LG G3 from Ebay which was blocked on AT&T for using it both in the USA and in Europe (I choose this model for its frequencies supported). It is a D850 model as you can expect.
After receiving it, I unlocked it to run different carriers. I rooted it as well.
I want to install the AT&T 5.0.1 update from OTA (I don't care about root right know). But I have one big problem. I keeps saying that my software is up to date which is wrong. Is it because I'm on T-Mobile right know and AT&T blocks the update ?!
I'm using build D85010d. right know and I never had a software update notification. I've tried to set my phone date to a couple days forward as suggested by Android Police. No luck.
I just want to have the update. After that if it says "you are rooted, you can't install", I will unroot it and reinstall.
Is there any way to update manually ? I heard it's impossible thanks to AT&T.
This is beginning to irritate me.
Thank you in advance
picobuntu said:
Hi,
I bought a LG G3 from Ebay which was blocked on AT&T for using it both in the USA and in Europe (I choose this model for its frequencies supported). It is a D850 model as you can expect.
After receiving it, I unlocked it to run different carriers. I rooted it as well.
I want to install the AT&T 5.0.1 update from OTA (I don't care about root right know). But I have one big problem. I keeps saying that my software is up to date which is wrong. Is it because I'm on T-Mobile right know and AT&T blocks the update ?!
I'm using build D85010d. right know and I never had a software update notification. I've tried to set my phone date to a couple days forward as suggested by Android Police. No luck.
I just want to have the update. After that if it says "you are rooted, you can't install", I will unroot it and reinstall.
Is there any way to update manually ? I heard it's impossible thanks to AT&T.
This is beginning to irritate me.
Thank you in advance
Click to expand...
Click to collapse
have you found any solutions to this? i'm using an unlocked att G3 as well (although not blocked) and I can't figure out how to update. i even tried to put someone's ATT sim in it and it still said it was up to date, which is completely false. god i hate att. can't update, can't use Qi charging, can't do anything.
I can't update my lg g3(d855) too. It's have the 4.4.2 kitkat and i want upgrade it to 5.0.1 lollipop.
Plzz help if u find a solution to this problem
Same issue .......how to update to lollipop manually ....................... if someone can help it will be appreciated :good:
I am having an issue with the AT&T Lollipop update, as well. I bought a D850 from eBay on KitKat 4.4.2, and when I inserted my AT&T MVNO SIM and checked for updates, it found the Lollipop update. It started downloading, but about 2/3 of the way through, the display shut off (I had it set for 15 minutes). When I got the display back, this action had stopped the download, and it did not continue. Now, when I check for updates, it just says I have the current version. I have run system resets, and tried a different AT&T SIM, but I can't get the Lollipop download again. Does the start of a FOTA download set a flag somewhere that prevents re-downloading?
Only thing I could think of is asking for a .kdz file for your phone and carrier and then flashing that using the LG Flash Tool
unable to update D850
I have the same issue. I have a D850 AT&T version and my is not showing any update available. I am in 4.4.2. Any solution how to update? Please help. Thanks to all
I'm another victim of this. Have someone found a solution? I'm desperated. And sad, I feel scammed.
At&t LG g3 d850
Hi, I'm New in the XDA forum.
My name is Neeraj
And when I saw your post, I found me.
What ever you do please don't do custom rom update.i found that in a hard way.
Like you I too bought one from ebay, at&t logo but unlocked, and while trying to update says it's up to date.
Later I found out I need at&t SIM to update the phone. Because it's only network unlocked not the entire phone. It still got some sorts of at&t restrictions.
Any way I went and rooted, installed twrp, and cm13 6.0.1 then Walla my phone goes into reboot loop and when it finally opens up the network doesn't work.
By the I'm in Australia , temporary residence and I don't have at&t SIM.
So good luck and infact i'm hoping some one will guide me too
I fixed it, don't know exactly if it will work on others.
But what exactly I did was search Google download official stock rom for at&t LG G3 D 850 ( KitKat or lollipop), flash the rom and Walla got my IMEI number restored and it fixed my boot loop problem.
Then backed up by all data, IMEI, etc and then flashes back to custom CM marshmallow. Now all is well. ?
Hope it this will help some one aleast a newbie lie me
Hi guys, I need some help.
Two weeks ago my mic stopped working so I installed the latest stock rom for my G3 D855 (D855P20C_00.kdz) with the KDZ method so I could use the warranty. (I followed this procedure http://forum.xda-developers.com/showthread.php?t=2785089 and downloaded it here http://lg-firmware-rom.com/ )
Somehow LG find out that I had root before, they show me their software and it was displaying "rooting".
I don't know how, because it was totally formatted, I followed the procedure, I had lost twrp, root and it was in the same version I had when I bought my G3 which was 20C.
I was lucky, they had a lot of warnings in the room saying that 27/01/2016 was the last day that they would accept the warranty for cell phones with root, but they accepted mine.
Today I received my G3 back and they changed the main board, now I am afraid that if I root it again I won't be able to use my warranty without sue them first, which takes a lot of time.
I'm from Brazil, I read that in some countries in Europe they already separated the hardware warranty from software warranty, but here it's all the same, only one kind of warranty.
I am really suspicious that the technical assistance could have installed a faulty or old main board hoping that I would root my device again and then I would have to pay for the assistance in a next time.
Btw the new board also has the 20C rom..
I really want to install stock marshmallow again or fulmics rom, if anyone could help it would be really appreciated.
Sorry for my english and thank you in advance
Hi I bought a refurbished LG G4 and I set it up and used it for one day and it was great. But I went into the about section and noticed that it wasn't running Android 6.0 yet so I connected it to LG bridge and updated it through the program. Next thing I know after it finished updating it booted into encryption mode asking for a password. I try enter something and it goes to 29 attempts out of 30 if I try it again it just stays there and doesn't change or or go below 29 it has now randomly changed into Chinese too.
I contacted the company I bought it off and explained it to them and said there should have been an explanation in my package. But there wasn't.
It's not allowing me to boot into recovery and I have no idea what to do.
I used this phone for one day and spent a lot of money on this phone and I have no idea what I can do to fix this situation.
thomas.wesley said:
Hi I bought a refurbished LG G4 and I set it up and used it for one day and it was great. But I went into the about section and noticed that it wasn't running Android 6.0 yet so I connected it to LG bridge and updated it through the program. Next thing I know after it finished updating it booted into encryption mode asking for a password. I try enter something and it goes to 29 attempts out of 30 if I try it again it just stays there and doesn't change or or go below 29 it has now randomly changed into Chinese too.
I contacted the company I bought it off and explained it to them and said there should have been an explanation in my package. But there wasn't.
It's not allowing me to boot into recovery and I have no idea what to do.
I used this phone for one day and spent a lot of money on this phone and I have no idea what I can do to fix this situation.
Click to expand...
Click to collapse
not sure if flashing stock firmware will help... now the question is what version of android has right now.?
you can try the back to stock guide... not sure if it will erase everything .. but if you going to downgrade lets say you took the last update antiroll back 3 you can only downgrade to a firmware that its the same antiroll back version.. the last update from my variant its v3.. so ask first... then download firmware flash an d hope its wipes all and start from scrath..
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
It says on the website that it's running Android 5.1.
I tried the KDZ method last night and I would get and error when the upgrage was at 9%.
It's a refurbished phone, if that makes all the difference?
thomas.wesley said:
It says on the website that it's running Android 5.1.
I tried the KDZ method last night and I would get and error when the upgrage was at 9%.
It's a refurbished phone, if that makes all the difference?
Click to expand...
Click to collapse
not sure, you best bet is to post that problem in that thread and provide all info and pic of error..
Use LGUP or LG FLASH TOOL 2014 for going back to the same kdz u were on? Also try to remember when u bought the phone did it had update center when u go into "about" u didnt try OTA via wifi?
I got my lg g3 fixed running v30b and i rooted it got all the lg g5 apps but i dont have custom recovery so i cant flash a rom and everytime i replace the framework and system ui from the lg g5 it gets bricked and i have to flash a new kdz so can someone help me? Please
what the.... why are u trying to port framework without a custom recovery? it's not hard to install there is a program called g3 autorec that you can find online (not on playstore) that will install an old version of twrp for you and backup your current recovery, just make sure u get the right one, there are diff versions for diff g3 models.
Motherboard doesn't support android kitkat/lollipop partitions
Now thats my problem my motherboard doesnt support android kitkat or lollipop so if my use autorec my motherboard is fried thats what happened last time when i tried to downgrade to kitkat i want to get a working port of framework and systemui and maybe lge-res so i can get a taste of the white theme from lg g5 that works for all variants after that i'll use root explorer
Cool?
My software version is
D85230B
V30B for short
Android 6.0 marshmallow
Can somebody please help me?
moreogthanu said:
Now thats my problem my motherboard doesnt support android kitkat or lollipop so if my use autorec my motherboard is fried thats what happened last time when i tried to downgrade to kitkat i want to get a working port of framework and systemui and maybe lge-res so i can get a taste of the white theme from lg g5 that works for all variants after that i'll use root explorer
Cool?
My software version is
D85230B
V30B for short
Android 6.0 marshmallow
Click to expand...
Click to collapse
First downgrade to kitkat (with a d852 tot or kdz), then root, then use autorec. After that you can flash what you want.
RapHaeL_4_4_4_ said:
First downgrade to kitkat (with a d852 tot or kdz), then root, then use autorec. After that you can flash what you want.
Click to expand...
Click to collapse
now i want you to read my reply again what does it say i can't downgrade or i have to pay for a new motherboard because my phone was manufactured in 2016 and believe me I've tryed
moreogthanu said:
now i want you to read my reply again what does it say i can't downgrade or i have to pay for a new motherboard because my phone was manufactured in 2016 and believe me I've tryed
Click to expand...
Click to collapse
Pretty sure you just did something wrong. You say your device is a D852 (from your software version), the fact that a D852 kdz or tot is not compatible with your D852 because it was manufactured in 2016 is very unlikely. You also said that your motherboard was "fried" when you tried to downgrade (which is again, VERY unlikely), if your motherboard was fried you phone would be dead right now.
"now i want you to ...(blablabla)", don't ever say that if you want to get some help.
RapHaeL_4_4_4_ said:
Pretty sure you just did something wrong. You say your device is a D852 (from your software version), the fact that a D852 kdz or tot is not compatible with your D852 because it was manufactured in 2016 is very unlikely. You also said that your motherboard was "fried" when you tried to downgrade (which is again, VERY unlikely), if your motherboard was fried you phone would be dead right now.
"now i want you to ...(blablabla)", don't ever say that if you want to get some help.
Click to expand...
Click to collapse
ok my dude. number 1 chiiiiiiiilllllll number 2 listen to this listen very carefully it says on the box ok note this is the lg g3 box it says. Manufactured: 10/2016 alright so dont come to me talking about it is very unlikey cause when i did it my phone wouldnt charge anymore and several partitions were missing. ok. Chill bruh
moreogthanu said:
ok my dude. number 1 chiiiiiiiilllllll number 2 listen to this listen very carefully it says on the box ok note this is the lg g3 box it says. Manufactured: 10/2016 alright so dont come to me talking about it is very unlikey cause when i did it my phone wouldnt charge anymore and several partitions were missing. ok. Chill bruh
Click to expand...
Click to collapse
I said it was unlikely that the kdz or tot wont work because your phone was manifactured in 2016, not that your phone was manifactured in 2016.
That being said, I guess you don't understand really well english and that's causing some misapprehension.
I was not rude or anything, I was just trying to help you.
Have a nice day, I wont answer anymore.
I strongly recommend this thread is closed.