Hi- I've recently gotten ahold of a old SE xperia arc, it was stock ICE, non-bootloader unlocked, not rooted etc.
I've unlocked the bootloader w/ sony's webpage where you fill in imei etc,
I go for installing a custom rom, namely the cm13 from the LX Project page ( http://legacyxperia.github.io )
i extracted the boot.img from the zip, did fastboot flash boot boot.img .
when i enter recovery after doing this, I have no option to flash from sdcard, where i've put the romzip, the only option i see is sideload, I've never used adb sideload functionallity before, i'm used to do it from the sdcard inside the clockwordmod recovery.
Anyway, formated /system, etc., fired up adb, did the sideload of rom & gapps (Mardon's Mini GApps), and then rebooted.
Now the device is stuck in boot animation of marshmellow. What to do?nevermind, the power of trying, trying and trying again 10 times actually made it boot, yet- ive done nothing different.
Related
okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.
flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart
but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.
Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly
ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[
Boot.img must be flashed via fastboot. Not via recovery !
ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!
Good, thanks to @tomascus. He summed it up real nice
Cheers
Hello!
My Oppo Find 7 (international) seems to be bricked.
I'm on stock ROM COS 1.2.5 with stock recovery 1.0
After booting it stuck in the Setup-Wizzard with "settings has stopped"-Loop.
Unfortunately in stock-ROMs the USB-debugging is disabled, so i can't acces via adb fastboot to flash other recoverys.
And cause of the loop i can not enable USB-debugging...
The recovery (stock 1.0) let me only flash 1.2.5, no other ROMs work.
Things that work:
- entering fastboot (but no access via adb as i wrote)
- entering recovery and execute "zip from sd" (while sd means only internal sd here)
- normal boot to the f****** Setup-Assistant, enter PIN. At slect Language the "setting has stopped"-loop starts
- while the device is in loop, i can access the internal and external SD-card via PC, copy and delete files works
Please, has anybody an idea what to do ?
Thanks to all
Marco
Since you can get into fastboot, download a custom recovery, go to fastboot, type
fastboot flash recovery x
Replacing x with the full name and extension of the file, and install a ROM. Alternatively, if you want ColorOS, try downloading 1.2.4i, and installing it through the stock recovery. Then you can update from there
Hmmmm....
Positive! At this moment i learned that USB-debugging is needed for adb-access on a booted device, not for fastboot-access
Yes, i could flash TWRP via fastboot (puuhh, not bricked)
THANKS !!
Now i can mess around the "settings has closed"-Loop, wich is still in place.
(No wiping fixes the problem, even 1.2.1 nor 1.2.3 or whatever)
But i'm on the road again and can check out fixes.
Thanks again!!
That's weird. Did you ever install custom ROMs before having this issue?
Did you try formatting System in TWRP? But be careful, when you format System you have to install stock Color OS BEFORE rebooting your device. That means stay in TWRP after you format and install the ROM, then reboot.
I had formatted all things including internal storage using twrp. After that I flashed oxygen os 4.0 with USB using twrp.Installation is successfull.But when I rebooting the system it still boots into TWRP screen.I am not able to see one plus boot logo as it always boots to twrp screen even after successfully installation.I am wondering why even after succesfull flashing still the phone always boot into twrp screen.Pls help in resolving the issue
Flashing a lower version and then the 28 version back helped me... Had the same problem
jaganmohans said:
I had formatted all things including internal storage using twrp. After that I flashed oxygen os 4.0 with USB using twrp.Installation is successfull.But when I rebooting the system it still boots into TWRP screen.I am not able to see one plus boot logo as it always boots to twrp screen even after successfully installation.I am wondering why even after succesfull flashing still the phone always boot into twrp screen.Pls help in resolving the issue
Click to expand...
Click to collapse
1 ) flash stock recovery and sideload full zip of 3.2.8 oxygen os
2) boot to system
3) reboot to stock recovery
4) sideload full zip of 4.0.1
5) boot to system
6) boot to bootloader and flash twrp -28 recovery (adb fastboot flash)
7) after flashing boot to twrp recovery from bootloader
8) flash SU SR2 v2.79 and boot to system
Hi everyone,
I tried to update my rooted Pixel C with Android 8 and TWRP 3.1.0.0 from August build to September build with FlashFire.
All of the following have I done on my Nexus 5x as well and it worked as a charm there.
Therefore i dl'd the corresponding zip-file from google dev page and started the update with FF. It said to me it can update the boot, system, recovery and vendor partition so I unchecked the recovery partition only to keep TWRP. I also told FF it should include SuperSU again to root the new Android.
After the update the device was unrooted, so i tried to start into recovery to install superSU manually. But TWRP was gone and i get everytime the android on the back with the text "no command".
Therefore I tried to flash TWRP with NRT again. But after the flash the device always starts into TWRP and Android isn't starting anymore.
I can use NRT again to flash Android without loosing my data but than TWRP is gone again.
So either the device always starts into TWRP or I have no recovery installed.
Anyone an idea what i can do to flash TWRP again and to fix the boot order or whats broken than?
Regards,
flattervieh
I don't have the C but here's what I would try. First, have your device booting normally with the stock recovery. Then use fastboot to boot into TWRP, not flash it. When it boots into TWRP then flash supersu. From TWRP then boot back into the bootloader and then flash TWRP with fastboot.
Flash the latest (beta?) TWRP. It allows reading the encrypted data folder.
Short notice, i'm still struggling with the problem.
In the meantime I tried the following:
1. I temporarely booted TWRP 3.1.0.0, with this version I was not able to encrypt the data partion (always invalid key) but I was able to see the system partition and I installed SuperSU. After that i restarted into the bootloader and flashed TWRP 3.1.0.0.
This led to the same phenomenon, that my pixel always boots into TWRP and not into Android itself.
2. Same thing as before but with TWRP 3.1.1.1.
With this version I was able to see the size of the data partition, but I was also not able to read or write onto it. (Again invalid code) I installed SuperSU and made a device restart without flashing TWRP 3.1.1.1.
This led to a totally softbricked device with a boot into "no command" screen.
After flashing Android again via fastboot Android starts correctly and I can use the device but root is still not working.
Regards
I'm not sure why twrp isn't sticking. But the android on its back with "no command"is the stock recovery. To get into it simultaneously press and release the power and vol up keys. You might have to try it a few times as the timing can be very finicky. From there you can boot into the system, you don't need to flash the factory image and start all over.
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
mkohan said:
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Click to expand...
Click to collapse
I'm new to this phone as well (but not to Android). Try the following:
Download TWRP from here -> https://androidfilehost.com/?fid=6006931924117884758
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip from here -> https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Power off phone. Hold down volume down and power button to boot into fastboot
Give the command fastboot flash recovery twrp-3.3.1-1-whyred.img to flash the recovery you downloaded earlier.
Boot into recovery
Flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip that you downloaded earlier
The above steps will at least ensure that you retain TWRP and it doesn't get overwritten by stock MIUI recovery
After that, check whether or not your phone/ROM has anti-rollback enabled and take appropriate steps accordingly.
Ok so i flashed PE 10 plus today and was met with the same problem.
Heres how i solved it
Goto fastboot option by pressing volume down and power button
Connect to pc (If it doesnt recognize, reinstall Adb drivers and phone drivers)
If it asks for decryption password just press cancel
Wipe data/internal/vendor (wont be able to wipe dalvik as it wont mount)
Flash PE 10 Plus and nothing else.
It should boot just fine.
However i run into bootloop if i flash latest magisk so i cant root my phone :/
Hope this helps
mkohan said:
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
Click to expand...
Click to collapse
hey read your post
actually adb and fastboot are two different things.
and recovery is flashed using fastboot commands not adb.
sometimes if a rom is not booting it may have issues with encryption.