Hello so on my s3 whenever i connect to my home WiFi it says authentication error. I know its not the router because it works great on my tv laptop and xbox. Also its not the phone because i can connect to public hotspots and my moms hotspot. If you know how to fix this problem and thanks in advance.
Maybe there's a certain limit to how many devices can connect to the router? Go into your router settings and check, if not go to your phone and try unchecking automatically connect to wifi then rebooting your phone. See if that helps!
MrPeebles_ said:
Maybe there's a certain limit to how many devices can connect to the router? Go into your router settings and check, if not go to your phone and try unchecking automatically connect to wifi then rebooting your phone. See if that helps!
Click to expand...
Click to collapse
I forgot to say this, I was able to connect before but i was in the middle of using it shut down
PLS READ THIS BEFORE U REPLY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Related
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Try this ...
kman79 said:
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Click to expand...
Click to collapse
Click-start>settings>connections tab>wi-fi>network adapters>
make sure your ieee 802.11b/g compatible wi-fi Ad....is connecting you to "The Internet" and not "Work." Cheers
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Check these as well...
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
start>settings>connections>wi-fi:
1. Click on your wirless SSID which should say connected.
2. Make sure it says connected to the internet.
3. Select the "This is a hidden network."
4. Make sure all of your keys/passwords are correct.
start>settings>connections>wireless LAN:
1. Make sure it is connected with good strength.
2. Verify It gave you an ip on the Advanced Tab.
3. Turn the Power Mode all the way up to Best Performance.
In your router verify you are not blocking or mac address filtering this connection. You might want to reserve the IP address for you device MAC.
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
Worked for myself and others... http://forum.xda-developers.com/showthread.php?t=300887&page=5
(post #44)
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Yes It does matter....
kman79 said:
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Click to expand...
Click to collapse
TURN IT OFF!!!
Inside of activesync you must tell it allow wireless / data connection. If you press and hold the hangup red button the GRPS connection will drop. You can also turn it off in the comm manager.
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Wam7 said:
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Click to expand...
Click to collapse
My guess is that the version of PIE you are using (or PIEPlus) has a hard-coded proxy address that your device cannot reach. I use Opera myself, works much better than PIE (IMHO).
John
Have you tried changing the authentication to Shared instead of Open?
This worked for me.
I have the same problem with these newest roms, just after set up 3G connection(Softbank by using ConnSBM).
It worked fine with roms before 5/15th.
i just upgraded to shaps latest wm6 rom. the wifi works at first; but when i came back from school, it wont connect anymore. it gives the error 'cannot connect to the networ and service provider settings and try again. i tried setting my router to an open network. but it still wont connect. i tried it on a different router. it gives the same error. did a hard reset twice. connects as soon as i finish hard reset. but after like i come back from school. it gives the same error. i even re-flashed the rom this morning and it was working. i just got in now and its still giving me the same error. can someone help me please??
Check that your mac address is still ok and you are getting an ip address. There is a thread on here for fixing dead WLAN if your mac address is blank.
http://forum.xda-developers.com/showthread.php?t=322225
markafreeman said:
Check that your mac address is still ok and you are getting an ip address. There is a thread on here for fixing dead WLAN if your mac address is blank.
http://forum.xda-developers.com/showthread.php?t=322225
Click to expand...
Click to collapse
yes. my desktop makes use of a wifi adapter to connect to it. and its working fine.
Be sure the Proxy's are disabled for connections using the phones WAN. here is a cab to allow you to turn it on & off easily.
http://forum.xda-developers.com/attachment.php?attachmentid=59995&d=1196392341
not sure if this is gona help, but when i had wifi problems i found that going to settings, wireless lan, then the power mode tab and changing the power save mode from best battery to best performance fixed my wifi issues.
get your email address out of your login name
Try removing the network connection settings and let it redetect the network.
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.
There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.
I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.
Yeah, I mis-read your first post, sorry!
For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.
jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.
Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.
Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking
hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?
Hey all,
I searched but couldnt find the same issue for the touch pro 2/ tilt 2, not sure if anyone has any ideas.
So every time I try to connect to ANY wifi, my phone goes through the attempting connect phase and drops the connection then says the connection is unavailable, refreshs the networks and shows the same connection is available.
Does anyone on have any ideas?
Thanks,
JC
on your browser on your computer, enter your ip address and then log in as admin and turn of G in your connection
Hey, yeah no sure if its a setting on the router as i can't connect to other routers. and i was able to connect before.
Either way what do u mean by turn off G, what is G?
JRocca said:
Hey, yeah no sure if its a setting on the router as i can't connect to other routers. and i was able to connect before.
Either way what do u mean by turn off G, what is G?
Click to expand...
Click to collapse
I really dont know much, but that was the problem on my device, when it was stock it worked well but then i put custom roms, it wouldnt connect so i was told to turn of G in the router setting and it worked, can you access as admin on the router?
go to advance settings and switch it from work to internet
Ok i figured it out...very funny one, kinda, I have network filter set on the router and mistyped the mac address of the tilt, fixed the address and it worked fine
Thanks guys
lol user error
Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Flinck said:
Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Click to expand...
Click to collapse
You are getting wifi signal at home but do not have a router? You mean a wifi router? If that's the case maybe you are picking up wifi signals from someone else's router and you cannot connect because you need to sign on? If you are having trouble getting on your own router, could you tell us what it is etc.?
You didn't set up a Blur account? Or you did and it doesn't work? Where are you located? If you tried to set it up and couldn't it may be because some markets (I hear) do not support Blur. For instance, there are some models of Defy that do not have Blur and that's probably why.
Sorry i should have made it clearer: i have not bought any kind of router but the modem i use could have a wifi router incorporate(i don't know if it does i lost its documentation).
I live in a house with no nearby sources of wifi and both networks (the one i use to connect to the internet from my pc and the wifi i find if i scan wth my phone have the same name)
I live in Romania and everytime i try to set up a Blur account and click the start button it cancels.
Flinck said:
Sorry i should have made it clearer: i have not bought any kind of router but the modem i use could have a wifi router incorporate(i don't know if it does i lost its documentation).
I live in a house with no nearby sources of wifi and both networks (the one i use to connect to the internet from my pc and the wifi i find if i scan wth my phone have the same name)
I live in Romania and everytime i try to set up a Blur account and click the start button it cancels.
Click to expand...
Click to collapse
Is there any way you can temporarily disable your modem's wifi security just so you can get on to see if that works? Make sure to turn it back on after, this is just to see if that's the cause of the trouble.
Also about setting up a Blur account - did you try that at home, or at an open Wifi area (eg. the restaurant)? If it doesn't work at home then I guess it's worth trying it at the restaurant or any other place where you can get the connection to work.
Well the network i get here at home is 'open' and i get a connection everytime.. just no internet access on my phone and the computer doesn't seem to recognise the connection (happen exactly he same even on the times i had internet access)
Flinck said:
Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Click to expand...
Click to collapse
exactly what happened to me. is not a router's problem but a DNSes problem.
you must enter the router and disable the "automatic DHCP". enter in the settings of the phone, wifi, advanced DNS settings automatically if not found. and it work.
P.S. after this if you have problems with your computer, right click the connection, and then do "problem solving". good luck ...
powertony84 said:
exactly what happened to me. is not a router's problem but a DNSes problem.
you must enter the router and disable the "automatic DHCP". enter in the settings of the phone, wifi, advanced DNS settings automatically if not found. and it work.
P.S. after this if you have problems with your computer, right click the connection, and then do "problem solving". good luck ...
Click to expand...
Click to collapse
the only problem is that I can't seem to find a router in my devices.. i have a internet modem that might have a wi-fi router incorporated
How does the computer connect to the modem if it uses USB i'm not too sure what you can do but if it uses ethernet what I recommend you do is click on start, and type in "cmd" when this loads type "ipconfig /all" this will then bring up all the details of your connection. What you are looking for is the default gateway, this will be the address of your router. With this add "http" and the default gateway number into a browser,you should then be able to get into the routers config and then you can follows powertony84's guide.
Well i'm pretty sure the network I connect to with my phone is mine because i just changed its security level to WEP using bobdigby advice. But I got lost afterward.
I have attached a prinscr of the DHCP setting i can fiddle with and i really appreciate your help so far
Any idea what channel i should use? i got a tip to chage the channel but i don't know into which one
I don't use any router but I turn my laptop, which supports wifi, into a wifi hotspot so that my defy can use wifi within my apartment. It's wonderful!