Develop Bugs

[Q] bricked (challenge to members)

MARVEL PVT SHIP S-ON RL
HBOOT 1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Hello,
Recently my htc wildfire S crashed and only boots to Hboot mode..
cannot go to recovery and cannot do factory reset.. when i press these options the phone just reboots to hboot mode
the phone can be detected via usb and i do get hboot usb plug detection as well fastboot usb mode..
I have tried hundreds of possibilities to flash but failed..
Have tried the RUU method via computer whereby i get different errors and also tried different RUU but unsuccessful
The last RUU that i had used to root my phone was
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed
which worked well for one year but crashed after reseting to factory settings
now..
when my bootloader is unlocked i got error 155 image error
when my bootloader is relocked i get error 140 bootloader version error
both ways it stops during verifying for signature
and on the phone it shows main version older.. update failed
have tried to place PM76IMG.zip on sdcard but the phone reads as wrong or no image
(and this goes for different RUU as well)
have tried to use fastboot via cmd commands but get
FAILED (remote: 12 signature verify fail)
or
FAILED (remote: 43 signature verify fail)
images do load without problem but fail after signature checking
there is no other RUU newer than 2.26
cannot downgrade hboot cause cannot access my phone just hboot mode only
cannot do flash recovery as i have tried many recovery images all failing as well as clockword mode recovery image
PLEASE HELP load the ROM and make the phone usable again

Did you make a Gold card before placing PG76IMG in SD card?

tahaice said:
MARVEL PVT SHIP S-ON RL
HBOOT 1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Hello,
Recently my htc wildfire S crashed and only boots to Hboot mode..
cannot go to recovery and cannot do factory reset.. when i press these options the phone just reboots to hboot mode
the phone can be detected via usb and i do get hboot usb plug detection as well fastboot usb mode..
I have tried hundreds of possibilities to flash but failed..
Have tried the RUU method via computer whereby i get different errors and also tried different RUU but unsuccessful
The last RUU that i had used to root my phone was
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed
which worked well for one year but crashed after reseting to factory settings
now..
when my bootloader is unlocked i got error 155 image error
when my bootloader is relocked i get error 140 bootloader version error
both ways it stops during verifying for signature
and on the phone it shows main version older.. update failed
have tried to place PM76IMG.zip on sdcard but the phone reads as wrong or no image
(and this goes for different RUU as well)
have tried to use fastboot via cmd commands but get
FAILED (remote: 12 signature verify fail)
or
FAILED (remote: 43 signature verify fail)
images do load without problem but fail after signature checking
there is no other RUU newer than 2.26
cannot downgrade hboot cause cannot access my phone just hboot mode only
cannot do flash recovery as i have tried many recovery images all failing as well as clockword mode recovery image
PLEASE HELP load the ROM and make the phone usable again
Click to expand...
Click to collapse
Your recoverys are not flashing as you have relocked your bootloader pal. Try flashing the stock recovery from hboot this should at least have a factory reset option. Failing this, you should try re-unlocking your bootloader and then flashing cwm.
If all of this fails then you will need to gain access to an xtc clip, make the phone s-off and then flash any ruu you want bump this thread if you need anymore help
Sent from my Nexus 7 using Tapatalk HD

varun26296 said:
Did you make a Gold card before placing PG76IMG in SD card?
Click to expand...
Click to collapse
thanks for reply
i did not make a gold card.. my phone crashed on me without consent lol..
and i cannot make one now coz there is no shell or rom on my phone.. just bootloader and thats it..
unless there is a way around to make a goldcard via fastboot menu??

heavy_metal_man said:
Your recoverys are not flashing as you have relocked your bootloader pal. Try flashing the stock recovery from hboot this should at least have a factory reset option. Failing this, you should try re-unlocking your bootloader and then flashing cwm.
If all of this fails then you will need to gain access to an xtc clip, make the phone s-off and then flash any ruu you want bump this thread if you need anymore help
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for reply
none of the recoverys are flashing either bootloader is unlocked or relocked.. Tried even flashing CWM but all i get is errors that image verify fail!! unless i am going somewhere wrong..??
My phone is S-ON is there no around this without an xtc clip..?? coz thats another issue

tahaice said:
Thanks for reply
none of the recoverys are flashing either bootloader is unlocked or relocked.. Tried even flashing CWM but all i get is errors that image verify fail!! unless i am going somewhere wrong..??
My phone is S-ON is there no around this without an xtc clip..?? coz thats another issue
Click to expand...
Click to collapse
What errors are you getting when trying to flash cwm via fastboot while the bootloader is unlocked. Be specific please
Also their is no other way to s-off bar the xtc clip. But, once you have s-off trouble shooting bootloader/ruu issues is far easier
Sent from my Nexus 7 using Tapatalk HD

heavy_metal_man said:
What errors are you getting when trying to flash cwm via fastboot while the bootloader is unlocked. Be specific please
Also their is no other way to s-off bar the xtc clip. But, once you have s-off trouble shooting bootloader/ruu issues is far easier
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
#heavymetal
when UNLOCKED
image update error
when RELOCKED
signature verify fail
i tried flashing CWM version 5.0.2.8 image file..
(the same happens while flashing other files!!)

tahaice said:
#heavymetal
when UNLOCKED
image update error
when RELOCKED
signature verify fail
i tried flashing CWM version 5.0.2.8 image file..
(the same happens while flashing other files!!)
Click to expand...
Click to collapse
Ok while unlocked, take your cwm recovery image and rename it to recovery.img if you have not already.
Then boot into fastboot and use the command
Fastboot boot recovery recovery.img
Hopefully it will boot into the recovery. This is only tempoary, do not reboot until you have wiped everything. Check and see if it boots after full wipes.
If this fails you will need a xtc clip...
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
---------- Post added at 09:45 PM ---------- Previous post was at 09:04 PM ----------
heavy_metal_man said:
Ok while unlocked, take your cwm recovery image and rename it to recovery.img if you have not already.
Then boot into fastboot and use the command
Fastboot boot recovery recovery.img
Hopefully it will boot into the recovery. This is only tempoary, do not reboot until you have wiped everything. Check and see if it boots after full wipes.
If this fails you will need a xtc clip...
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
Edit: the more i look into this the more it doesn't look good to be honest pal, most people who get into this state send it back to the manufacturer and get the motherboards replaced....
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

heavy_metal_man said:
Ok while unlocked, take your cwm recovery image and rename it to recovery.img if you have not already.
Then boot into fastboot and use the command
Fastboot boot recovery recovery.img
Hopefully it will boot into the recovery. This is only tempoary, do not reboot until you have wiped everything. Check and see if it boots after full wipes.
If this fails you will need a xtc clip...
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
---------- Post added at 09:45 PM ---------- Previous post was at 09:04 PM ----------
Edit: the more i look into this the more it doesn't look good to be honest pal, most people who get into this state send it back to the manufacturer and get the motherboards replaced....
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
tried again all possibilities..
with fastboot boot recovery recovery.img it does download successfully and writes booting.. however after the phone has booted by itself the htc screen shows up (with white background) and directly goes into fastboot menu without other options...
Maybe i am uploading wrong recovery image??
if its loading into bootloader menu that means my phone is soft bricked right?? which can be undone??
my dilemma is that i live in a third world country with no htc service providers or good phone repair shops who would have an xtc clip..

tahaice said:
tried again all possibilities..
with fastboot boot recovery recovery.img it does download successfully and writes booting.. however after the phone has booted by itself the htc screen shows up (with white background) and directly goes into fastboot menu without other options...
Maybe i am uploading wrong recovery image??
if its loading into bootloader menu that means my phone is soft bricked right?? which can be undone??
my dilemma is that i live in a third world country with no htc service providers or good phone repair shops who would have an xtc clip..
Click to expand...
Click to collapse
The main issue is that it should still boot into the recovery via fastboot regardless of its working state from what i have read the main nand seems to have some sort of error that it cannot over write so its not letting you boot anything weither that is a fail safe or not i dont know. At this point a xtc clip would be your last hope, but i cannot guarrentee it would work... I have an xtc clip, but i dont want to post it outside of the uk ......
Sent from my Nexus 7 using Tapatalk HD

Were you overclocked ? Were you using some sort of memory script ?
I'd say your best option is to have it sent back, smells like a burnt motherboard.

heavy_metal_man said:
The main issue is that it should still boot into the recovery via fastboot regardless of its working state from what i have read the main nand seems to have some sort of error that it cannot over write so its not letting you boot anything weither that is a fail safe or not i dont know. At this point a xtc clip would be your last hope, but i cannot guarrentee it would work... I have an xtc clip, but i dont want to post it outside of the uk ......
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
thanks for your help heavy metal.. seems i am left with a dead fone after all RIP :crying:

omnomnomkimiiee said:
Were you overclocked ? Were you using some sort of memory script ?
I'd say your best option is to have it sent back, smells like a burnt motherboard.
Click to expand...
Click to collapse
no didnt mess with phone settings.. didnt overclock it.. and no memory scripts.. though had installed avast anti-theft software.. would it have played a part? but i remember uninstalling the software before resetting my to factory settings!!

im sorry for your loss man what do you think you will do with the device? bin?

Recover soft-bricked HTC Wildfire S
tahaice said:
no didnt mess with phone settings.. didnt overclock it.. and no memory scripts.. though had installed avast anti-theft software.. would it have played a part? but i remember uninstalling the software before resetting my to factory settings!!
Click to expand...
Click to collapse
Hi tahaice!.
I just recovered an HTC Wildfire S A510e for a friend with a problem similar to yours!
He entered on HBOOT and wiped & format some partitions: data/factory reset, system, data, sdcard, etc.....
I read quickly your problem and I think that this can help you:
1.- Download the correct RUU from: androidfiles.org/ruu/?developer=Marvel_MarvelC
For instance, I used RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed for Spain (Device was with last update, my friend was sure).
You can check it on HBOOT:
MARVEL PVT SHIP S-ON RL
HBOOT 1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Click to expand...
Click to collapse
And when you finish restore: go to Settings/About phone/Software info/More. Base band version must match the file you used (you will not restore radio.img, if not needed).
2.- Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be folders with long names (C:\Users\lefe\AppData\Local\Temp\{9739F95A-99D7-43BA-8AB6-E4F02264D361}\{50F2F878-636A-496F-A7CB-544C067E0C4B} for instance).
Inside one of them you will find the file rom.zip from RUU. Open it with 7zip and extract recovery.img, boot.img and system.img. Put it in the location you preffer (C:\Users\lefe\HTC Wildfire S A510e\ADB in the example).
You also need adb.exe, AdbWinApi.dll and fastboot.exe. Copy from the folder you found the file rom.zip (or from Android SDK tools if you have installed it).
3.- Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
As you say, this is not needed in your case because your phone goes directly. Just plug.
4.- Open a command prompt in Windows and navigate to the folder where you unpacked ADB / installed Android SDK tools. Flash the stock images extracted in step 2 above using the following commands (Remember to turn your firewall off):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Click to expand...
Click to collapse
Example (what I did):
Code:
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash boot boot.img
sending 'boot' (2870 KB)...
OKAY [ 1.336s]
writing 'boot'...
OKAY [ 1.650s]
finished. total time: 2.994s
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash recovery recovery.img
sending 'recovery' (3494 KB)...
OKAY [ 1.572s]
writing 'recovery'...
OKAY [ 1.970s]
finished. total time: 3.554s
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash system system.img
sending 'system' (259862 KB)...
OKAY [ 31.535s]
writing 'system'...
OKAY [ 64.846s]
finished. total time: 96.393s
5.- Finally, in your phone go to HBOOT menu and make a FACTORY RESET.
If needed, PowerOff device (remove battery for 3 seconds) and Boot the phone into bootloader (hold down volume and press power).
That's all!!.
I hope you get lucky!
[Plz, mark thread as Solved if that helped you, other users will love to read it when googling]

heavy_metal_man said:
im sorry for your loss man what do you think you will do with the device? bin?
Click to expand...
Click to collapse
right now its hidden deep inside my cupboard.. dont want to see it near me!! a disappoinment

bolzass said:
Hi tahaice!.
I just recovered an HTC Wildfire S A510e for a friend with a problem similar to yours!
He entered on HBOOT and wiped & format some partitions: data/factory reset, system, data, sdcard, etc.....
I read quickly your problem and I think that this can help you:
1.- Download the correct RUU from: androidfiles.org/ruu/?developer=Marvel_MarvelC
For instance, I used RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed for Spain (Device was with last update, my friend was sure).
You can check it on HBOOT:
And when you finish restore: go to Settings/About phone/Software info/More. Base band version must match the file you used (you will not restore radio.img, if not needed).
2.- Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be folders with long names (C:\Users\lefe\AppData\Local\Temp\{9739F95A-99D7-43BA-8AB6-E4F02264D361}\{50F2F878-636A-496F-A7CB-544C067E0C4B} for instance).
Inside one of them you will find the file rom.zip from RUU. Open it with 7zip and extract recovery.img, boot.img and system.img. Put it in the location you preffer (C:\Users\lefe\HTC Wildfire S A510e\ADB in the example).
You also need adb.exe, AdbWinApi.dll and fastboot.exe. Copy from the folder you found the file rom.zip (or from Android SDK tools if you have installed it).
3.- Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
As you say, this is not needed in your case because your phone goes directly. Just plug.
4.- Open a command prompt in Windows and navigate to the folder where you unpacked ADB / installed Android SDK tools. Flash the stock images extracted in step 2 above using the following commands (Remember to turn your firewall off):
Example (what I did):
Code:
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash boot boot.img
sending 'boot' (2870 KB)...
OKAY [ 1.336s]
writing 'boot'...
OKAY [ 1.650s]
finished. total time: 2.994s
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash recovery recovery.img
sending 'recovery' (3494 KB)...
OKAY [ 1.572s]
writing 'recovery'...
OKAY [ 1.970s]
finished. total time: 3.554s
C:\Users\lefe\HTC Wildfire S A510e\ADB>fastboot flash system system.img
sending 'system' (259862 KB)...
OKAY [ 31.535s]
writing 'system'...
OKAY [ 64.846s]
finished. total time: 96.393s
5.- Finally, in your phone go to HBOOT menu and make a FACTORY RESET.
If needed, PowerOff device (remove battery for 3 seconds) and Boot the phone into bootloader (hold down volume and press power).
That's all!!.
I hope you get lucky!
[Plz, mark thread as Solved if that helped you, other users will love to read it when googling]
Click to expand...
Click to collapse
thank bolzass for ur reply..
without doubt we have the same ROM version and i had downloaded the same RUU from androidfiles website.. but still getting those silly errors despite following each step carefully!! i dont know what has gone wrong

BY THE WAY I CANNOT ERASE USERDATA
it says FAILED (remote: not allowed)
can this be causing other errors???

tahaice said:
right now its hidden deep inside my cupboard.. dont want to see it near me!! a disappoinment
Click to expand...
Click to collapse
At this point its probably for the best
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

tahaice said:
thank bolzass for ur reply..
without doubt we have the same ROM version and i had downloaded the same RUU from androidfiles website.. but still getting those silly errors despite following each step carefully!! i dont know what has gone wrong
Click to expand...
Click to collapse
Ops!?!?..., Can you detail these errors?.
I'm also reading your message bellow about erasing Userdata...:$, detail also this scenario so we can think about your concret issues.
Keep fighting till you're sure there's nothing to do...

[Q] Need the right RUU for my device! Please help!

Hi Dudes,
as I'm about to sell my HTC Wildfire S for a few bux. In order for that, I want(/need) to go back to stock firmware, but I can't seem to find the fitting RUU for my device.
I'd take the rom.zip out of this RUU, rename it to PG76IMG.zip and then I'd flash it throught HBOOT.
I already tried two RUUs:
1)RUU_Marvel_S_HTC_Europe_2.13.401.3_Radio_47.23c.35.3037_7.54.39.28M_release_236989_signed.exe
..as it had the right ending of the Radio version respectively the one shown when I boot into bootloader (7.54.39.28M)
...Error: Main Version is older! Update Fail!
2) RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
...as it is the latest one available for the Wildfire S Europe
...Error: Main Version is older! Update Fail!
So, please help me!
Thank you all in advance!
P.S.:
*** RELOCKED ***
MARVEL PUT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.54.39.28M
Feb 8 2012, 18:29:31

iH8ra!n said:
Hi Dudes,
as I'm about to sell my HTC Wildfire S for a few bux I want to go back to stock firmware, but I can't seem to find the fitting RUU for my device.
I'd take the rom.zip out of this RUU, rename it to PG76IMG.zip and then I'd flash it throught HBOOT.
I already tried two RUUs:
1)RUU_Marvel_S_HTC_Europe_2.13.401.3_Radio_47.23c.35.3037_7.54.39.28M_release_236989_signed.exe
..as it had the right ending of the Radio version respectively the one shown when I boot into bootloader (7.54.39.28M)
...Error: Main Version is older! Update Fail!
2) RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
...as it is the latest one available for the Wildfire S Europe
...Error: Main Version is older! Update Fail!
So, please help me!
Thank you all in advance!
P.S.:
*** RELOCKED ***
MARVEL PUT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.54.39.28M
Feb 8 2012, 18:29:31
Click to expand...
Click to collapse
Try the newest RUU.............or better still,flash the zip via a custom recovery.That oughta do it
If not flash this
http://forum.xda-developers.com/showthread.php?t=1916045
Click to expand...
Click to collapse
Good luck on selling your device :good:

Try extract install file and with cmd and fastboot flash RUU rom easy way- TESTED on my WFS
u need only recovery.img, system.img and boot img

csoulr666 said:
Try the newest RUU.............or better still,flash the zip via a custom recovery.That oughta do it
If not flash this
Good luck on selling your device :good:
Click to expand...
Click to collapse
As I already stated in the OP. I tried 2) because it is the latest on the list from "ShippedROMs". Thanks for the tip but I need pure Stock firmware.
martelinko said:
Try extract install file and with cmd and fastboot flash RUU rom easy way- TESTED on my WFS
u need only recovery.img, system.img and boot img
Click to expand...
Click to collapse
What's the "install file"?! Thanks, will try that later and report if respectively if it didn't work!

Aha , i know what u need
wait i upload files after download only flash boot.img, recovery.img,system.img and have 2.13.401.3 stock rom
if i understand u only say me
If u need 2.26.401.3 say me only
Here is link for 2.13.401.3 stock rom files
http://www.2shared.com/file/QcVxFmch/files.html
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img

martelinko said:
Aha , i know what u need
wait i upload files after download only flash boot.img, recovery.img,system.img and have 2.13.401.3 stock rom
if i understand u only say me
If u need 2.26.401.3 say me only
Here is link for 2.13.401.3 stock rom files
http://www.2shared.com/file/QcVxFmch/files.html
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Click to expand...
Click to collapse
Will my phone not automatically receive an OTA to 2.26?!
Can you upload the files to a platform on which I do not need to sign up if I only want to download a file?! Thanks!

Not automaticaly but u will be choose for update on 2.26 but u can ignore
Yep, download withou sign up only click on DOWNLOAD :angel:
If i was helpfull, click on THANKS

martelinko said:
Not automaticaly but u will be choose for update on 2.26 but u can ignore
Yep, download withou sign up only click on DOWNLOAD :angel:
If i was helpfull, click on THANKS
Click to expand...
Click to collapse
Just download the 2.26 RUU by myself from here and extracted the radio, boot, recovery, system, userdata and ramdisk (-.img) from the rom.zip. Will flash them later and report back if it worked...hopefully it will
EDIT: After every single flash attempt, the terminal gave me sth like this:
fastboot flash boot boot.img
sending 'boot' (2870 KB)...
OKAY [ 1.279s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.910s
Sidenote: Only the bold written part - the "error part" - is important in that case as the rest depends on what I've chosen to flash (i.e. replace 'boot' with 'recovery', 'system')
Any help?!
P.S.: When I boot it boots still into CM (the ROM I come from).

U try format boot and other partition on CWM?
I dont have any problem with this files flashed on first time
Try format all, and again flash (first recovery.img)
Try lock bootloader, and unlock again.Check if u have installed usb drivers on PC.
Or try flash this files with CWM(install zip from SD card).
Or try this method http://forum.xda-developers.com/showthread.php?t=651526
or this http://androidforums.com/wildfire-s...ock-rom-ruu-after-bricking-rooted-device.html

[Q] After downgrade touch don't work

My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?

Here is another thread that discusses a similar issue.
Hope it'll help.
http://forum.xda-developers.com/showthread.php?t=1056767
Sent from my G9 using Tapatalk

Pretendde said:
My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Click to expand...
Click to collapse
Hmmm. This is going to be hard to get out of as you upgraded your Hboot. Does the phone still register fastboot commands? Also what downgrade thread did you follow?
Sent from my HTC Sensation using Tapatalk

It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!

Pretendde said:
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Click to expand...
Click to collapse
That's not what I mean, to unlock your bootloader you would have had to issue the command fastboot OEM unlock, or fastboot flash OEM unlock unlock_token.bin or something similar. These types of commands are the ones I'm interested in I want to see if you can flash clockworkmod recovery pal.
Sent from my HTC Sensation using Tapatalk

I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom

Pretendde said:
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Click to expand...
Click to collapse
Ok so fastboot works, good good. Do you have clockworkmod recovery installed? If not follow my thread for rooting hboot 1.02.0000 and install clockworkmod but go no further.
Also just for your information the ruu will not install because of
1. Your honor is higher than the ones in the RUU,
2 your bootloader is unlocked.
We need to downgrade you to the WWE rom with hboot 1.01.0001 and hopefully that will restore your touch panel to working order
Sent from my HTC Sensation using Tapatalk

Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?

Pretendde said:
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Click to expand...
Click to collapse
ok so what we want to do know is downgrade your hboot to 1.01.0001 so to do that we need your misc partition to be edited. as such i would like you to boot the phone into clockworkmod recovery and connect it to the pc with a usb cable. windows should install the drivers if it has not done so already.
next you will need to set up your command prompt for using adb/fastboot commands.
then we will pull a copy of your misc partition to your sdcard and then copy it into your windows adb folder.
then you will upload that image to me, i will make the necessary changes and then re-upload for you.
then you will flash it to the phone all going well, re-lock your bootloader and then downgrade your hboot and rom and hopefully regain touch input
then as an extra if you want to use a rooted version of that german ruu you were trying to flash i can make you a "safe to flash" version
ok, so....
step 1. Connect your wildfire up to your pc In clockworkmod recovery mode.
step 2. open a command prompt within your adb/fastboot folder. (the same one you used to flash clockworkmod recovery)
step 3. enter the following commands one at a time. copy paste is recommended.
Code:
adb shell
su
cat /dev/mtd/mtd0 > /sdcard/misc.img
exit
exit
adb pull /sdcard/misc.img misc.img
step 4. Upload this file to somewhere like dropbox or media fire and then send me a link to it.

in command prompt
su
/sbin/sh: su: not found
what i do wrong?

Pretendde said:
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Click to expand...
Click to collapse
OK just skip that and move onto the next bit.
Sent from my Nexus 7 using Tapatalk

I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before

Pretendde said:
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Click to expand...
Click to collapse
okey dokey, here is your new misc image. extract it into your adb folder.
i have edited this so it will re-lock your bootloader automatically once you have flashed it. one problem solved
also download this package, it has some tools you will need and the WWE rom you need to flash
lastly we need to make a goldcard. this will be hard given that your touch screen is non-functional. as such you will need a different, working android phone and YOUR sdcard. this trick is sdcard specific so dont swap them about
ok once you are ready with the right stuff, do these steps.
step 5. now we need to make a gold card. if you already have one, you can skip this part. first using your working android phone, download and install Goldcard helper from the android market. Run the app and copy down your SD cards reverse cid. double check it
step 6. now go to this website here and enter in your reverse cid. it will then let you download a goldcard.img.
step 7. now go back to the package you downloaded earlier with the WWE rom (named 1.01.zip) in it and run the goldcardtool.exe, this will flash the goldcard to your sd card. Warning! this will format your card!! in order to achieve this you will have to mount the sdcard from clockworkmod recovery to the computer, use mount usb storage and not mount sdcard.
step 8. once that is done we are now ready for the final push

Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?

Pretendde said:
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Click to expand...
Click to collapse
ok from here copy the Nmisc.img to your sdcard and do not rename it, leave it on the sd card within no folders.
then connect up the phone in clockworkmod recovery again, and mount the sdcard with mount sdcard and not usb mass storage.
lastly make sure that the 1.01.zip is in your adb folder.
issue the following commands.
Code:
adb shell
(your shell symbol should be a #)
flash_image misc /sdcard/Nmisc.img
exit
(now it should not be a #)
adb reboot bootloader
The phone should not reboot into bootloader and should say at the top locked OOW.
This is ok, if it does not say this then your misc image was not flashed.
if all is well issue these commands.
Code:
fastboot oem rebootRUU
fastboot flash zip 1.01.zip
This will state an error, and that it needs to be reflushed. this is what we want, if any other issue your goldcard may have failed.
repeat the last command to reflush.
Code:
fastboot flash zip 1.01.zip
(this will take a while.)
fastboot reboot
the phone should reboot into the WWE stock rom and hopefully your touch screen will be working again. if it is proceed to s-off with revolutionary here ignore all but revolutionary and then if you want the german ruu as a safe flash rom send me a link to the ruu and I will make it. but it make take a few days.
im at work atm so my replys will be delayed pal, good luck

INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....

Pretendde said:
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Click to expand...
Click to collapse
Your gold card has failed. Format the sdcard and then reissue the fastboot commands.
Sent from my HTC Sensation using Tapatalk

Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error

Pretendde said:
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Click to expand...
Click to collapse
Does your bootloader still say locked?
Sent from my HTC Sensation using Tapatalk

heavy_metal_man said:
does your bootloader still say locked?
Sent from my htc sensation using tapatalk
Click to expand...
Click to collapse
yes
*** locked (00w) ***

Soft-bricked D820n a51_ul after upgrading just firmware from OTA

Hello,
i have single sim d820 (europe)
Code:
***************************
Software status: Modified
A51_UL PVT SHIP S-ON
hboot-3.19.0.0000
radio-01.01.010_U10305041_08.01.50512
os-2.10.401.2
***************************
Before i messed it up it was unlocked and rooted and S-ON, then i wanted to install OTA and i flashed firmware.zip extracted from OTA zip file (bad idea). Now i'm unable to get my phone working...
What i can do:
-enter bootloader
-fastboot commands
-enter recovery
What I've tried and didn't work:
-flash stock recovery, lock, flash RUUk44.zip via fastboot (signature verify fail)
-flash stock recovery, lock, flash lollipop OTA (signature verify fail)
-flash TWRP, restore k44 backup (bootloop after reboot from recovery)
The question is, if I would somehow obtain firmware from k44 stock, is it possible to downgrade on S-ON using "fastboot flash zip" and then restore backup or flash RUU?
I cannot find magical RUU.exe for this model there are only zip files...
Guys maybe someone can dump kitkat firmware i would be grateful...
I appreciate any idea, please help me solve it

Look here: http://www.easy-firmware.com/index.php?a=browse&b=category&id=725
The first zip ist the europa version kk 4.4. for 51 ul.
Rename it as OPFJIMG.zip and put it on your external sd car. boot into bootloader and let it run. I hope it works for you!
By the way, is it possible for you to upload and share your complete OTA zip? Would be wonderfull.

Oel said:
The first zip ist the europa version kk 4.4. for 51 ul.
Rename it as OPFJIMG.zip and put it on your external sd car. boot into bootloader and let it run. I hope it works for you!
By the way, is it possible for you to upload and share your complete OTA zip? Would be wonderfull.
Click to expand...
Click to collapse
Zip method does not work for me neither from fastboot nor from sdcard. In fastboot i get "signature verify fail", via sdcard it says sth like "fail due to large image failed".
I'm now downloading exe file from your link.
edit: RUU.exe from link above failed - stuck at 4%(checking header or sth like that)
I will upload OTA zip this night.
Maybe i don't understand something, but i wonder why RUU zip doesn't contain firmware.zip like OTA update package.. ?

Good luck and thank you for the upload bro!

cr3h said:
I will upload OTA zip this night.
Click to expand...
Click to collapse
Do you have the OTA uploaded ?
Today it was possible for me to install the orange version spain from the ruu.zip what i mentioned to you!
I was following this tut:
"You can extract the ROM.zip from any RUU to install via ZIP
Start the RUU and once at the first main screen click Start>Run and type
%temp%
now, find the newest folder and in there will be a ZIP file called Rom.zip - copy this to your desktop and rename it to OPFJIMG.zip Now copy this to your SD card and start the phone in HBOOT (turn it on whilst holding volume down). It will find the file and start the update. Just follow the instructions...
It will wipe your phone, though"
Than with the zip on the sdcard i started fastboot and adb on my computer, i entered the command "fastboot oem lock", the message "Unlocked" and Security Warning" appeared, than i pressed the On/Off button, it changed to bottloadermodus, and voila, it was eating the zip!
Only this zip was good enough, the other zips was not running, not the europe version and not the english orange version. But with the spanish version ist was ok. But only with the extracted Rom.zip. When i started the Ruu.zip it stops the update Process after some %. But the Rom.zip from the same ruu works without bad messages.
Now i have a clean firmware on y desire 820n 51 ul.
The languages in this version are: Deutsch, English, Español, Francais, Portugues.

Oel said:
Do you have the OTA uploaded ?
Today it was possible for me to install the orange version spain from the ruu.zip what i mentioned to you!
I was following this tut:
"You can extract the ROM.zip from any RUU to install via ZIP
Start the RUU and once at the first main screen click Start>Run and type
%temp%
now, find the newest folder and in there will be a ZIP file called Rom.zip - copy this to your desktop and rename it to OPFJIMG.zip Now copy this to your SD card and start the phone in HBOOT (turn it on whilst holding volume down). It will find the file and start the update. Just follow the instructions...
It will wipe your phone, though"
Than with the zip on the sdcard i started fastboot and adb on my computer, i entered the command "fastboot oem lock", the message "Unlocked" and Security Warning" appeared, than i pressed the On/Off button, it changed to bottloadermodus, and voila, it was eating the zip!
Only this zip was good enough, the other zips was not running, not the europe version and not the english orange version. But with the spanish version ist was ok. But only with the extracted Rom.zip. When i started the Ruu.zip it stops the update Process after some %. But the Rom.zip from the same ruu works without bad messages.
Now i have a clean firmware on y desire 820n 51 ul.
The languages in this version are: Deutsch, English, Español, Francais, Portugues.
Click to expand...
Click to collapse
Here is link to uploaded OTA: http://forum.xda-developers.com/des...ta-d820n-single-sim-a51ull50-europe2-t3226897
I'm getting this error, after hboot detects 0PFJIMG.zip: Device halted due to Large Image update fail, and my bootloader is relocked.
Did you flash this onto OS-2.10.401.2??

It looks like i have to wait for lollipop RUU and/or for S-OFF possibility.... am I correct?
Maybe i can try flash separate partition dumps from FW 1.29 (radio, rcdata, etc...)?

cr3h said:
It looks like i have to wait for lollipop RUU and/or for S-OFF possibility.... am I correct?
Maybe i can try flash separate partition dumps from FW 1.29 (radio, rcdata, etc...)?
Click to expand...
Click to collapse
S-OFF would solve the problem, because you can flash (upgrade and downgrade) than every os-version for the desire 820.
Of cource, you can try to flash dumps from 1.29 if this was your original firmware. Maybe it works.

Oel said:
S-OFF would solve the problem, because you can flash (upgrade and downgrade) than every os-version for the desire 820.
Of cource, you can try to flash dumps from 1.29 if this was your original firmware. Maybe it works.
Click to expand...
Click to collapse
If i only have these dumps... :crying:

cr3h said:
Hello,
i have single sim d820 (europe)
Code:
***************************
Software status: Modified
A51_UL PVT SHIP S-ON
hboot-3.19.0.0000
radio-01.01.010_U10305041_08.01.50512
os-2.10.401.2
***************************
Before i messed it up it was unlocked and rooted and S-ON, then i wanted to install OTA and i flashed firmware.zip extracted from OTA zip file (bad idea). Now i'm unable to get my phone working...
What i can do:
-enter bootloader
-fastboot commands
-enter recovery
What I've tried and didn't work:
-flash stock recovery, lock, flash RUUk44.zip via fastboot (signature verify fail)
-flash stock recovery, lock, flash lollipop OTA (signature verify fail)
-flash TWRP, restore k44 backup (bootloop after reboot from recovery)
The question is, if I would somehow obtain firmware from k44 stock, is it possible to downgrade on S-ON using "fastboot flash zip" and then restore backup or flash RUU?
I cannot find magical RUU.exe for this model there are only zip files...
Guys maybe someone can dump kitkat firmware i would be grateful...
I appreciate any idea, please help me solve it
Click to expand...
Click to collapse
Hello. Did you managed to fix your phone? I have exactly the same problem as you. I don't know how to fix it ;d

Hello. Did you managed to fix your phone? I have exactly the same problem as you. I don't know how to fix it ;d
Click to expand...
Click to collapse
No, i did not.
I think there are 2 maybe 3 options:
- Wait for s-off (or pay for it now), then downgrade
- Wait for lollipop RUU for our current firmware
- Try to flash twrp backup of someone's lollipop - but im not sure if twrp works on llpop already, does it?
- Maybe try to flash firmware partitions separately, dumped from someone's d820n, but i don't know if it's even possible to reflash device that way. This can also be a last step to totally brick

I made s-off and cid-11111111 also flash with ( RUU_A51_UL_K44_DESIRE_SENSE60_Orange_ES_1.28.75.2_Radio_01.01.010_U10305041_08.01.41222_2_release_421565_signed 0
this ruu.Flash successful but still hang on logo and restart.

hello, can you share the Orange_es .zip file?

cr3h said:
Hello,
i have single sim d820 (europe)
Code:
***************************
Software status: Modified
A51_UL PVT SHIP S-ON
hboot-3.19.0.0000
radio-01.01.010_U10305041_08.01.50512
os-2.10.401.2
***************************
Before i messed it up it was unlocked and rooted and S-ON, then i wanted to install OTA and i flashed firmware.zip extracted from OTA zip file (bad idea). Now i'm unable to get my phone working...
What i can do:
-enter bootloader
-fastboot commands
-enter recovery
What I've tried and didn't work:
-flash stock recovery, lock, flash RUUk44.zip via fastboot (signature verify fail)
-flash stock recovery, lock, flash lollipop OTA (signature verify fail)
-flash TWRP, restore k44 backup (bootloop after reboot from recovery)
The question is, if I would somehow obtain firmware from k44 stock, is it possible to downgrade on S-ON using "fastboot flash zip" and then restore backup or flash RUU?
I cannot find magical RUU.exe for this model there are only zip files...
Guys maybe someone can dump kitkat firmware i would be grateful...
I appreciate any idea, please help me solve it
Click to expand...
Click to collapse
http://forum.xda-developers.com/des...hip-s-hboot-3-19-0-0000-t3508017#post69879100

ViperOneM9 6.2.0 installed successfully but reboot is cyclic

Hello Team,
I installed ViperOneM9 6.2.0 in my rooted HTC M9.
it did install successfully. However it keeps booting to same screen
*** SOFTWARE STATUS : MODIFIED ***
***UNLOACKED ***
*** S-ON ***
REBOOT
REBOOT TO BOOTLOADER
BOOT TO DOWNLOAD MODE
BOOT TO RECOVERY MODE
POWER DOWN
I tried rebooting it many times but same screen appears everytime.
i did clean up both caches.
Please help. My phone is completely dead now.
Regards

You can boot in download? (The black screen)
Sent from my HTC One (M9) using XDA Labs

lucyr03 said:
You can boot in download? (The black screen)
Sent from my HTC One (M9) using XDA Labs
Click to expand...
Click to collapse
Thank you for the prompt feedback.
unfortunately i cannot boot from download mode as well.
this screen has following.
htc download mode
*** UNLOCKED ***
htc_himauh1 PVT S-ON
LK-1.0.0.0000
RADIO-01.04_U11440601_71.02.50709G_F
OpenDSP-v29.2.6-00492-M8994_0702
OS-2.10.401.1
Jul 9 2015,20.:20:56(576582)
system info
show barcode
reboot to bootloader
reboot to download mode
reboot
power down
security warning
if u wish ..................
File /mnt/media_rw/ext_sd/0PJAIMG.zip
File not found.
i tried multiple times to reboot in all options but nothing yet.
Please help.
Regards

sshameel said:
Thank you for the prompt feedback.
unfortunately i cannot boot from download mode as well.
this screen has following.
htc download mode
*** UNLOCKED ***
htc_himauh1 PVT S-ON
LK-1.0.0.0000
RADIO-01.04_U11440601_71.02.50709G_F
OpenDSP-v29.2.6-00492-M8994_0702
OS-2.10.401.1
Jul 9 2015,20.:20:56(576582)
system info
show barcode
reboot to bootloader
reboot to download mode
reboot
power down
security warning
if u wish ..................
File /mnt/media_rw/ext_sd/0PJAIMG.zip
File not found.
i tried multiple times to reboot in all options but nothing yet.
Please help.
Regards
Click to expand...
Click to collapse
This seems to be download mode for me
The problem is that you have corrupted boot.img and recovery.
You just need to flash twrp from download mode("fastboot flash recovery twrp.img" then fastboot erase recovery").
After that you will be able to boot in recovery, format cache, and install a rom.

lucyr03 said:
The problem is that you have corrupted boot.img and recovery.
Click to expand...
Click to collapse
Er, that's actually not the problem. Viper 6.2.0 is based on firmware 4.x. The download mode shows firmware version 2.10.401.1.
Taken from the ReadMe thread's FAQ:
Flippy498 said:
Q10: I flashed a custom rom. TWRP stated the flash was successful but the rom doesn't boot. What's wrong?
A: This can happen if your phone's firmware is outdated. Get back to stock and install all available OTAs. You can flash a newer RUU (if one with a newer firmware version of your phone's SKU is available) for saving some time that would otherwise be needed for installing OTAs. Further information can be found in the RUU section.
Click to expand...
Click to collapse
And this article might be worth reading in this case, as well:
The Difference between Rom and Firmware
It got written for the M8 and not all it mentions applies to the M9 but it gives a good overview of the problem.

Flippy498 said:
Er, that's actually not the problem. Viper 6.2.0 is based on firmware 4.x. The download mode shows firmware version 2.10.401.1.
Taken from the ReadMe thread's FAQ:
And this article might be worth reading in this case, as well:
It got written for the M8 and not all it mentions applies to the M9 but it gives a good overview of the problem.
Click to expand...
Click to collapse
Thank you for the feedback.
i tried the steps suggested above
however it is still the same
it keeps coming back to same black screen and options
reboot
i think i might be doing something wrong here.
can please share steps to bring it back to stock please.
Please help

You need to flash a RUU for your current firmware (or firmware 3.35.401.12 if you want to save some time). I'd suggest using the SD card method but in the end the method doesn't matter.
Step by step instructions and download links can be found in the RUU section of the ReadMe thread. Just use the direct link in the quote that I posted in my last message.
Sent from my HTC One M9 using XDA Labs

Flippy498 said:
You need to flash a RUU for your current firmware (or firmware 3.35.401.12 if you want to save some time). I'd suggest using the SD card method but in the end the method doesn't matter.
Step by step instructions and download links can be found in the RUU section of the ReadMe thread. Just use the direct link in the quote that I posted in my last message.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Thank you once again for the feedback.
i tried flash RUU & getting below errors.
File on laptop
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip C:\Users\emaj
sha\Downloads\3.35.401.12-Firmware.zip
target reported max download size of 800000000 bytes
sending 'zip' (48736 KB)...
OKAY [ 3.989s]
writing 'zip'...
(bootloader) HOSD CL#576582
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) ERR ZIP signature checking failed...
(bootloader) ERR [SD_UPDATE_ERR] Not allow flash image except boot/recov
(bootloader) ery/system
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 14
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 14
(bootloader) [email protected]
FAILED (remote: 14: fail to flash via downloadzip)
finished. total time: 7.580s
C:\Program Files (x86)\Minimal ADB and Fastboot>

Well, as explained in the RUU section you can't flash RUUs for the M9 via fastboot. They're too big.
Sent from my HTC One M9 using XDA Labs

Flippy498 said:
Well, as explained in the RUU section you can't flash RUUs for the M9 via fastboot. They're too big.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Thank you for the feedback.
I am getting below error .
i downloaded the RUU version as mentioned in the above post.
155 INDICATES DIFFERENT THINGS:
The RUU cannot be executed because your phone is S-ON and its Rom and/or Firmware version is newer than the one of the RUU.
from RUU exe installation i have the below
i have this
Verify that you want to upadte the ROM version
From
Image version
2.10.401.1
To
Image Version
3.35.401.12

sshameel said:
Thank you for the feedback.
I am getting below error .
i downloaded the RUU version as mentioned in the above post.
155 INDICATES DIFFERENT THINGS:
The RUU cannot be executed because your phone is S-ON and its Rom and/or Firmware version is newer than the one of the RUU.
from RUU exe installation i have the below
i have this
Verify that you want to upadte the ROM version
From
Image version
2.10.401.1
To
Image Version
3.35.401.12
Click to expand...
Click to collapse
Just to update.
I am able to restore it.
my M9 is up & running.
Thank you so much all for guiding & providing prompt feedback.
Take care.