Related
OK - I've been using the ATT store Body Glove case since I bought the Captivate, which is ok but I don't really like the stripes on the back, and it is a bit too slippery for me.
I just ordered the Seidio case because it has more of a matte finish and I liked the felt interior. So I don't know if I like it or not.
A few minutes ago I took the phone out of it's case to dust it and clean out the case when I got a call. I was surprised at how slim the phone felt without it's Body Glove case on. I liked it. But I also found it a bit slippery. ( A speaker phone call was put on the arm of the chair I was in - with the case it would hold - without it slid away)
Now I am wondering if I should just use some skateboard tape or something similar on key areas to allow me to set it down and hold it comfortably (where it won't slip) instead of using a case. I don't use a screen protector and I don't think this phone needs it.
Any comments or suggestions?
Now that I've thought about it for a few minutes - I think what I want is a rubberized battery cover. That would be the bomb.
I don't use a case on mine and I've yet to get a single scratch on the front or back - the glass is very tough. I cringe at having to use a case, losing accuracy, clarity, and brightness on the screen and having to touch through that...having it hard to slip in and out of my pocket...not looking as nice. It's like if your wife made you use a condom every time.
just "paint" it with some Elmer's Rubber Cement. Im really kidding but I'm with you I like the feel of the phone and I hate the rubber case I got it makes it a pain to get in and out of the pocket. Personally I plan on selling this phone in a couple of months so I want it in good condition.
vsboxerboy1 said:
I don't use a case on mine and I've yet to get a single scratch on the front or back - the glass is very tough. I cringe at having to use a case, losing accuracy, clarity, and brightness on the screen and having to touch through that...having it hard to slip in and out of my pocket...not looking as nice. It's like if your wife made you use a condom every time.
Click to expand...
Click to collapse
Agreed that the screen is fine on its own. But I still think the back needs some help.
Also, I do not like condoms. Neither do my wife and kids.
Ah, well I saw something a while back where someone basically took four little rubber/plastic stickers and put one on each corner of the back of the phone to lift the back up off whatever surface you set it on just a hair. I would imagine that you'd get good traction with that too - I can't seem to find the exact application of it though......
This thread is mostly me think out loud.
I believe that what I want is a rubberized battery cover.
The cover is slightly recessed - it is lower then the bottom locking section and the top section with the camera. It also wraps around the sides almost 1/2 of the way.
I think that if the battery cover were coated with a rubberized, non-slip material, it would be better. If the rubberization made the cover stick out slightly, rather than be recessed, it would allow the phone to be set on it's back and not slide away and keep the camera off the deck. Also, the wrap around side parts of the cover would help when holding the phone.
Now, can someone tell me of a place/process that might do this? (Not rubber cement but close) My pickup has a Rhino Lining coating that I love. There is a place nearby that does that work but the coating is like 1/8-1/4 inches and that is a bit to thick for the phone.
Any Ideas?
http://www.plastidip.com/home_solutions/Plasti_Dip
http://www.brownells.com/.aspx/pid=1150/Product/GUN_KOTE_trade__OVEN_CURE__GUN_FINISH
http://www.goboatingamerica.com/products/DM_article.asp?id=3645
Found these
Bought this stuff at Home Depot.
Then tested in on this beer can. I didn't clean or prep the can, just picked it up off of the floor.
This is 5 coats. It is still thin. Dries fast and feels just about how I'd like it to. Not tacky - sort of a hard rubber feel. It is flexible, the can bends and the stuff stays with it.
It can be scratched, you may be able to see a scratch I made with my nail. It didn't go all the way through to the can though - and I had to scratch hard. It looks like it would be easy to spray another coat over any scuffs.
I plan to do the back of the battery cover - thick enough to make it a bit taller than the top and bottom sections of the phone. The way it is going it seem like that may take 15+ coats. I'll keep testing.
Two things about that though, the battery cover is used not only as the speaker output but the battery cover itself also dissipates a good amount of the heat that the phone generates. You probably want to be a more careful than usual in designing something that is going to smother this part of the phone.
not sure how much you're looking to spend but I put the Zagg total protection on mine. You get full protection on your phone but you can't see it, so you still get the sleek look and it's still very thin as well. The clear plastic is also great for gripping, I can set it on the dash of my car and drive normally and it won't budge.
I've had good luck with bestskinsever.com
Used it on my Nexus One and the fit was good, buddy got one for his vibrant and the fit is good as well.
journeyman82 said:
not sure how much you're looking to spend but I put the Zagg total protection on mine. You get full protection on your phone but you can't see it, so you still get the sleek look and it's still very thin as well. The clear plastic is also great for gripping, I can set it on the dash of my car and drive normally and it won't budge.
Click to expand...
Click to collapse
Looks interesting. I wish they had the leather skin for the captivate. I would be all over that. In fact I may need to take a trip to the fabric store to see what they have.
Thanks.
Ok to finish up my saga...
I liked the faux leather on the cover mentioned in the post above so I went to the fabric store and ended up with some black, I believe they call it marbled vinyl. It looked and felt similar to the back of a blackberry I once held.
I tested it on my trusty Busch Light can with some 3M spray adhesive and it seemed to hold fairly well.
So I went for it. I taped off the inside and the prongs of the battery cover. Sprayed glue on the cover and the back of a piece of vinyl cut too big. Stuck it on and smoothed it out. I sat the cover on a bag of rice and and put a bag of brown sugar on top (to push around the curves) and topped it off with a gallon jug of tile grout.
Waited an hour, probably longer than needed, and used a pointy x-acto knife to trim off the excess. I had also put a piece of tape over the speaker holes so I cut that back open to. The underside of the vinyl has a white background so once it was trimmed to fit I went around the edges with a fine tipped sharpie, which blended well.
Overall I like it. It is just a bit thinker that the top and bottom bands, so if you lay her on her back those parts don't touch a flat table. It has a leathery, grippy feel without being tacky, which is what I was going for. I do already miss the front edge lip that the Body Golve provided but it is also almost it;s original thickness.
Pics below. (Sorry about the crappy last pic. I had the phone with new back all set up on a white surface, ready for it's glamor shot, when I realized that the phone is my camera)
Staplebox: great job!
Wow that is a nice, careful job.....
staplebox said:
Ok to finish up my saga...
I liked the faux leather on the cover mentioned in the post above so I went to the fabric store and ended up with some black, I believe they call it marbled vinyl. It looked and felt similar to the back of a blackberry I once held.
I tested it on my trusty Busch Light can with some 3M spray adhesive and it seemed to hold fairly well.
So I went for it. I taped off the inside and the prongs of the battery cover. Sprayed glue on the cover and the back of a piece of vinyl cut too big. Stuck it on and smoothed it out. I sat the cover on a bag of rice and and put a bag of brown sugar on top (to push around the curves) and topped it off with a gallon jug of tile grout.
Waited an hour, probably longer than needed, and used a pointy x-acto knife to trim off the excess. I had also put a piece of tape over the speaker holes so I cut that back open to. The underside of the vinyl has a white background so once it was trimmed to fit I went around the edges with a fine tipped sharpie, which blended well.
Overall I like it. It is just a bit thinker that the top and bottom bands, so if you lay her on her back those parts don't touch a flat table. It has a leathery, grippy feel without being tacky, which is what I was going for. I do already miss the front edge lip that the Body Golve provided but it is also almost it;s original thickness.
Pics below. (Sorry about the crappy last pic. I had the phone with new back all set up on a white surface, ready for it's glamor shot, when I realized that the phone is my camera)
Click to expand...
Click to collapse
love it, im stealing that!
Go for it. Usually I prefer to buy a second of whatever I am defacing before I deface it but I didn't find any battery covers online. I also didn't look to hard.
It is still on and I still like it. The only thing I don't like too much are the sides. I completely covered the back, right up to the side edges. It is a perfect thickness on the back but feels too thick on the sides. I wish I could have found a thinner material that I could have built up on the back and tapered to one layer on the sides. I really wanted grippyness on the sides so, oh well, it's good enough.
I'm still on the look out for a better spray on rubber. I'll update if I find anything good.
Hopefully someone will start making aftermarket battery covers with some options.
Thanks and good luck,.
Second the stealing. Awesome idea and writeup. Thanks for sharing.
From a phone on an app
I scrapped the vinyl. The edges were just bugging me to much. I still think a thinner material would work well though.
I cleaned up the cover - looked fine again with all the glue off of it.
I went back to the rubber spray. I've got about 8 coats on in the attached pic. Need to wait about 30 min in between coats. I'll keep going until I go to sleep, let it dry overnight - and test it out tomorrow.
ETA - put it on the phone the today. Love it. Doesn't add any bulk and provides a grippyness to the back and sides. I'll find out how durable it is.
Is there a rubberized battery cover? I just tried to install a full coverage Zagg but it wont stick to the textured back. I need to add some grip to this thing as i almost launch it every time i want to open the keyboard. This phone is slick! Especially coming from HTC phones.
Yeah I iknow where you're coming from, I'd appreciate a new cover too. It'd make the phone easier to open too.
Sent from my SAMSUNG-SGH-I927 using XDA App
I got the zagg to adhere to the back. It takes some time and patience to get it on there.
-Use minimal spray.
-Use extra bits of the zagg material as tape to hold the corners down.
-Let it sit over night on top of a radiator or some where warm.
-CAREFULLY remove the bits of zagg.
-Use your thumb to gently, but firmly rub the zagg into the texture.
-Avoid sitting the phone down on glass and other smooth surfaces it can stick to.
I can now open it with out sliding out of my hands
For most of the time there was a fog that developed in the air gaps under the zagg, they eventually went away.
I know the feeling, especially here in the cdn winter, where my hands are cold and dry. This phone becomes slippery.
I'm almost thinking we could do a back cover, MacGyver style.
Maybe order a spare back cover if possible or take the current one and coat the back of it with rubberized spray. There's the infomercial for Flex Spray [seems dodgy] or hit your local auto parts store for bed liner such as this one.
http://www.amazon.com/Dupli-Color-BAA2010-Bed-Armor-Aerosol/dp/B004SJ16QG
I would guess to take off the back, tape around the small flat edge that goes around the back cover and spray!
That's how I would tackle it.
clockwork58 said:
I know the feeling, especially here in the cdn winter, where my hands are cold and dry. This phone becomes slippery.
I'm almost thinking we could do a back cover, MacGyver style.
Maybe order a spare back cover if possible or take the current one and coat the back of it with rubberized spray. There's the infomercial for Flex Spray [seems dodgy] or hit your local auto parts store for bed liner such as this one.
http://www.amazon.com/Dupli-Color-BAA2010-Bed-Armor-Aerosol/dp/B004SJ16QG
I would guess to take off the back, tape around the small flat edge that goes around the back cover and spray!
That's how I would tackle it.
Click to expand...
Click to collapse
I have thought of that, but at the time i could not find a new battery cover, and did not want to try this on the only one i had.
The stuff on the TV is the same stuff as natural spray rubber, only twice the price for a half-size bottle. With some practice, you can get it to spread thinly and evenly, but something like undercoating or bed liner will apply thick and lumpy usually...
Hi
I bought a oneplus one about 3 months ago and I absolutely love it however I dropped it a while ago and everything is fine but the frame area to the left of the charging port is completely jacked up :/ chunks of it are missing too...
I'm currently using the oneplus flip cover however it doesn't cover it up, so my question is: is there any light tpu/hard shell case that covers up the entire silver bezel, or at least the bottom of the phone so I don't have to look at this anymore xD. All cases I've seen so far leave a bit of the bottom frame exposed just enough so you can see the damage :'(
Anyone know any case that can cover it up?
Thanks!
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Guess it all depends on what kind of protection you want. If you just want mild protection and to just cover the sides, then go with the tpu case. If you want heavy protection, I would suggest the Tudia Omnix Hybrid, http://www.amazon.com/TUDIA-Full-body-Protective-Protector-Resistant/dp/B00SO4XYHA . I have the Tudia case and it has taken a beating and protected the phone very well, even from some pretty high falls. Only con about the Tudia case, is that the front covers the sides of the screen a bit and prevents touch at the the very edges of screen. This can be a bit bothersome if using apps in full screen/landscape when you have to swipe down to exit full screen.
noahvt said:
Hi
Anyone know any case that can cover it up?
Thanks!
Click to expand...
Click to collapse
kenboyles72 said:
I would suggest the Tudia Omnix Hybrid
Click to expand...
Click to collapse
I too have a Tudia--Slim-fit Cygen.
thanks
thanks
Bino92 said:
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Click to expand...
Click to collapse
I totally agree, couldn't have said it better. Here are some visuals for you. I got the Diztronic case when I bought the phone, it has protected it from falling out a car, off the desk, and off a moderately high shelf. You can get a tempered glass screen protector off eBay, have to search a bit (TechArmor don't have one). I got one from user dreamlight2004 for around 5 dollars. I made the mistake of getting the OPO screen protector when i first got my phone and it went bad a month ago, a hard scratch from a key. Tempered glass protector looks so much better. Just loaded COS13, it should keep me busy until the OP3 gets announced - so far it's looking to be a really good phone (boo on the OP2 and OPX)
Case view
Phone view
I agree, Diztronic bumpers are terrific.
I'm using this one http://www.ebay.com/itm/Rearth-Case-OnePlus-One-Folie-Ringke-Fusion-Schutzhulle-Cover-Tasche-klar-/121715293296?hash=item1c56cbfc70:g:gAUAAOSwT6pVt5tV And it is awesome. You can also print your designs for this case!
Ringke Fusion for me is great. It covers the OPO completly.
DO NOT BUY THE TUDIA CASE.
I bought it because I thought it looked pretty sweet. It's the worst case I have ever owned, and I have owned a few. Half the case is slippery nonsense plastic. You grab your phone "wrong" (by this I do not mean insecurely, but simply you happen to not have your fingers on enough of the case's rubber outline), it's like holding an eel.
The clips covering the audio jack and usb port are an absolute NIGHTMARE to open, and plugging in your charger for the night would realistically take three hands with 17 fingers each to manage in a reasonable timeframe. Good thing my audio jack's clip, after having been used exactly twice without even the slightest bit of the abuse it deserved, now no longer clips into it's crevice, and is permanently hanging out at a 30 degree angle. The pop-out clip on the back is nail ruining torture to get out, as is the rubber outline holding the front of the case, should you want to get this garbage off to see how far you can launch it through the air in rage.
I wouldn't use this piece of junk if they paid me.
I am using the TUDIA Dual-Layer case+a glass screen protector, which turned my One to a tank
I drop it way too often, but it still works flawlessly, so I can recommend this case. It also coverers the aluminum frame
I can rep the Poetic Case found here:
I took out the screen protector but I have been rocking the case for more than a year. It is kinda bulky but I have no worries about dropping it or tossing my phone on my desk. Also, It is kinda water resistant (with the screen protector). I have dropped like a glass of water on it and quickly cleaned it up with no harm
I recently stumbled onto the DBrand skin website and I am very impressed! I can actually turn my black 2XL into the white colour I wanted originally!
Do these skins protect the phone if I drop it or is more for just an appearance thing? How long do the skins last on the phone before they start to peel away? Can they be removed without any damage to the phone?
It's basically expensive tape.
I have the black camo version.
I guess it could prevent a scratch, as it's covering the area, but no more than that.
I've used these things on two phones, one for a year, and it never started to peel away. Not even a bit.
They come off cleanly, no adhesive left behind etc.
What I did was get the red dragon skin back piece and installed it. Then I put my phone in a Ringke Fusion case. The skin adds some style, and the Fusion protects from the occasional drop. If you place the back piece right and let it sit overnight before installing the Fusion, you'll have no issues with it coming off. I remove and clean my case once a month or so, and the skin underneath still looks great with no lifting anywhere
Sent from my Pixel 2 XL using Tapatalk
I am on my 2nd dbrand skin. My first one was great for 5 months, then one of the corner tabs started to lift and would not stay down even with tacky glue. My 2nd one looks exactly the same as the day I installed it (pristine, and no lifting). If you don't like bulky cases and you aren't constantly dropping your phone, then you will probably love dbrand skins. But they are just big decals, and do not provide the same protection as even the cheapest silicone case. I have dropped my phone on bathroom tile and the dbrand skin looks the same, but I wouldn't be surprised if the frame is slightly dented or cracked underneath. The skin did a fantastic job of hiding any damage. If you decide to purchase a skin, heat the tabs with a hair dryer or heat gun *before* applying it. The instructions tell you to use a heat source after applying it. But also heating them *beforehand* makes them conform and stick better.
Alright, after months of trying to nail this problem down I finally have a good solution!
I've tried a few different cases on my fold3 and none of them really held well on the top screen when folded and in my pocket. It would start sliding off. So I finally have a solution. Get yourself some good double sided tape (I suggest some type of 3m tape This for example) and measure you a piece of tape that is length of the case that touches the phone that isn't on the screen. Then take a sharp knife and cut a very thin strip of tape. Put that strip on your case and then put the case on the phone. Press hard and hold it there for a bit and then BAM it's not going anywhere again. If it's done right it will not be noticable (see pics I've attached) unless you look closely it's really clean and nice looking to me.
In the pictures you can see the black strip of tape that came with the case that wasn't super useful but what useful was my piece of tape.
I have been lucky in that my cases have not had this issue, but I agree, if you need too, there is no shame in using tape to keep this thing protected.
Just use good quality stuff.
This is the stuff I have and I LOVE IT... https://smile.amazon.com/25Meter-Double-Adhesive-Display-Housing/dp/B071D5CKCX
Good solution, just easy.
Unfortunetly fold series and other folded devices need specially cover.
I have fold 2 1,5 year and few covers:
Ringke slim. Good cover but even pieces of double tape after take off i saw particles of dust and sand.
Next i bought Spigen armor pro. Great protection but a lot of bulky and even mount with force for good fit after few weeks and take off i saw few white dots on the frame from probably few particles sand.
It was little frustrating because I always to take care my devices and carry without any other stuff in my pocket.
4 days ago i told "stop" covers with use tape for hold on the device.
Without case fold is really beautifull and touch metal in every time is really pleasant .
I read topics on reddit about "caseless fold devices" and a lot of people have enjoy use folds without case.
After that I use my device only with original leather back cover, without front cover.
Admittedly 2 days ago drop my fold from pocket on the floor. It drop edge front frame but after that is only scratch and rest device survive well
I have béen using a dab of clear silicone sealant. Holds well, and comes off by rubbing it with a cloth.
After a few months of searching, I just gave up and use whichever is the slimmest case without an adhesive. It made more than a few scratches on the side of my screen and I just decided not to give a crap about it, it doesn't go over the main screen anyway.