R800x above 4.1.2? (4.4+ ?) - Xperia Play Q&A, Help & Troubleshooting

So right now I have my phone updated successfully (after messing it up...twice...) to 4.1.2. To be honest after using so many kernels trying to fix it, I can't remember the exact name but info says my kernel is 2.6.32.9-FXP, and I see a unicorn thing when it boots up. CM10 for the CyanogenMod version.
I tried using this: https://www.youtube.com/watch?v=4_fIiwfEnsQ
But when I did it just vibrated once when I turned it on and the screen stayed off. (reinstalled my old kernel and it works fine)
I'm wondering if I missed a step or perhaps it doesn't work on the R800x?
I just want to be able to play Pokemon Go, to be honest , so 5.0.2 isn't exactly necessary. Battery life and reliable phone calls would be top priority given at least Android 4.4

Related

[Q] Microphone stops working with latest roms

Right now my G2 is running Cyanogenmod-7.1.0 RC1. For the last few months any time I try to update past this version of the rom I lose my microphone. It works absolutely fine with 7.1 but when I go to 7.2 it breaks. For example, When I am on a call I can hear the other person but it is silent on my end. Voice recording programs do not work either, all that it records is a low level of static noise.
I have also tried CM9 and audacity beta4 with the exact same results. When I flash my phone back to 7.1 everything is fine.
Is there some way that I can flash just the old microphone drivers onto the new roms? I am competent enough to follow instructions but not enough to start breaking builds apart for the individual pieces so I don't know where to start.
I have always done a full wipe on everything before I flash.
Does anyone have any ideas? Thank you!
Currently I am running:
Radio: 12.52.60.25U_26.08.04.30_M3
Kernal: [email protected] #1
Mod: Cyanogenmod-7.1.0 RC1 vision
Build number: GRJ22
a
Didn't try any of those,
but this rom:
http://forum.xda-developers.com/showthread.php?t=1492461
works great on my HTC Desire Z with absolutely no issues
It does take a bit of customizing.
I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?
haymaker said:
I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?
Click to expand...
Click to collapse
Hi! Do you solve your problem? I have the same thing there. All the CM roms above 7.0.3 not working with microphone. Do you have still the Cyanogenmod-7.1.0 RC1 file rom and can you upload for me?
Thank you!

[Q] Phone deactivated?

I was running latest paranoid android and I wiped cache/dalvic cache after flashing Cerberus in recovery and when the phone booted up it was asking me to Activate (sprint service) my phone. I've never seen this with flashing roms and was wondering if this is a known issue with flashing roms on the S3 or something that can randomly occur from time to time.
Anyone have experience with this before? I had been running Paranoid Android for less than 24 hours but initially didn't have any problems whatsoever.
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
youdoofus said:
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
Click to expand...
Click to collapse
This didn't have anything to do with my Google account. I guess I should have been more specific, I mean that my phone is deactivated on Sprint's network as in I can't make phone calls and all the info is missing in about phone. Phone number, PRL and such. I am flashing back to stock right now and hope this fixes it. Will probably give paranoid another go but this doesn't sound like a common issue because I haven't been able to find anything by searching.
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Ahhh... could try manually flashing your modem after the install too
sent from my thumbs
billard412 said:
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Click to expand...
Click to collapse
Soon as I flashed the stock rom it tried to activate and initially failed and prompted me to reboot. Second attempt it was successful and then I immediately flashed back to PA and it is working. Going to give it another shot and keep the stock rom on my sd card this time in case I get stuck in a pinch.
I jumped the gun, phone activated fine but signal drops in and out randomly and will not connect to 3g. Just reflashed to stock again and everything seemed fine but signal was still back in and out. Checked under status and PRL read "0" tried updating to no avail so did the dialer code and it did the activation and all is right in the world again, or at least for the moment.
Just trying to figure out why when I flash Paranoid all my settings just disappear
*edit*
Just flashed back to PA this third time after fully making sure that the phone was working and had 3G data and all was right with the world (my phone). Will update if it goes South again but as of right now the phone is behaving properly. Maybe it just wasn't working right the first time and I didn't notice since I was on wifi. Only thing that keeps me from thinking that is I didn't get the Activation message until 12 hours or so after I had flashed and had been using the phone. /shrug
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
youdoofus said:
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
Click to expand...
Click to collapse
how do you flash a modem? I am new to this and this is also a problem that I am having with the same rom. I tried searching for a fix and this is where i landed.
Thank you,
and sorry if i am breaking forum rules

[Q] Fixing the Data Counter Issue

I'm looking to get some information on my what can be done to fix the Data Usage counter on my wife's i927R (Rogers) running the stock GB os. Currently any data counter application that is put on doesn't actually keep track of 3G/4G data correctly.
I have been reading up on just upgrading it to ICS but I recently read all about the phone call issues after it goes to sleep so I'll be holding off on that upgrade to that gets worked out.
I did notice that there were some GB Kernels (like ardatdat's) that say they fix the issue but they also do a bunch of other things like overclock which i'm not interested in.
Is there a way to just patch the existing stock kernal to correct the data counter issue? If so can you point me in the right direction of the files and steps to update?
Any help would be great.
Thanks
If you want a count of your data, message, and phone calls and are on att, dial *3282# into the phone and press call. It is very accurate and gives you the data in the form of a text message. Not sure if this is what you want, but this is what I do.
Sent from my SGH-I927 using xda app-developers app
The standard stock kernel can't be given that feature, you have to recompile it from source and then hope you get a working version. We are a small group compared to the other phones as our model is not quite as epic as the original as the original captivate galaxy s is still a great phone and being an attention whore still lol..
But we are All trying to do our best to get more mods out there.
I personally use ICS 4.0.4 stock (custom modded to my needs)
And run lite kernel 1.1.1 you may want to try an update to your ROM from gingerbread to ICS and I beleive at&t launched an official update with samsung, maybe try it and see if it helpa
Thanks for the replies but i'm not on AT&T but rather Rogers in Canada.
Also, I would update to ICS but from the other ongoing threads there is an issue with the phone not receiving calls\sms on those roms once it goes to sleep mode so i want to avoid that until it is fixed.
From the sounds of it the only solution is to flash a new kernel (such as ardatdat's) thats specifically says it fixes the issue. Perhaps I can figure out how to change overclock settings so that it runs stock speeds.
To flash a Kernel do I just use Odin like a Rom flash? Are there any How To's on Kernel flashing? I haven't found one around here for the glide.
Thanks
The AOSP ROMs default to stock clocks, why haven't you upgraded yet?
Craigatitus said:
Thanks for the replies but i'm not on AT&T but rather Rogers in Canada.
Also, I would update to ICS but from the other ongoing threads there is an issue with the phone not receiving calls\sms on those roms once it goes to sleep mode so i want to avoid that until it is fixed.
From the sounds of it the only solution is to flash a new kernel (such as ardatdat's) thats specifically says it fixes the issue. Perhaps I can figure out how to change overclock settings so that it runs stock speeds.
To flash a Kernel do I just use Odin like a Rom flash? Are there any How To's on Kernel flashing? I haven't found one around here for the glide.
Thanks
Click to expand...
Click to collapse
I come from rogers too.. the ICS update will work fine for you and overclock doesn't affect anything. I was using literom with lite kernel 1.1.1 before upgrading to cm10.. then pacman 18.2 and now on liquid smooth
You should at least upgrade to Ics.. phone runs faster and smoother and GPS is fixed in literom too.
What version of GB are you using ? I upgraded to the latest GB first when I got my glide and I don't recall data stats not working
The current os is 2.3.5 (Kernel 2.6.36.3), The latest one available for the phone through Kies. All the data usage counting apps do not work on this phone. They all report about 1/1000th of the actual usage. Wifi data reports correctly but thats not what's important.
roothorick: I searched for "AOSP Rom" and what i found was an alpha build with a bunch of known issues. As this is my wife's phone, this wouldn't go over well. Keeping the phone looking and functioning the same as much as possible is key.
yohan4ws: I was planning on upgrade to ICS but now i'm reading the threads about the issues with the phone not receiving calls or sms once it goes to sleep. That is unacceptable as it is the main purpose of having a phone. So you aren't experiencing any "no radio wake" issues with your setup?

[Q] Kernel problems on Arc LT15

Hi, I recently tried to install a nightly build from CyanogenMod, after a bit of messing around (because im not totally great at doing stuff like this) i managed to install the right kernel but quickly realised some glitches so decided to revert back to the stable 9.1 anzu build. but now all of a sudden today my kernel changed all by itself back to the nightly 10.x build kernel after i turned my phone off and back on which causes the screen to shake constantly on the 9.1 build. Ive tried using the flashtool and entered into fastboot mode via ADB but my phone just remains in the same state and wont go into fastboot mode.
My phone still works fine for receiving calls etc but obviously its very hard to see the screen with it shaking violently, as im pretty much a noob can anyone tell me how i can flash the right kernel back onto my phone and maybe delete the unstable kernel so it wont happen again?
I have tried my hardest to explain my problem so sorry if i'm making very little sense but any help/ideas would be very much appreciated
Thanks
Sem
Well my suggestion is to flash stock firmware and then try to flash cm9 again.
Sent from my GT-I9305 using Tapatalk 2

Shut off after LG logo

D851 here, When ever i switched from cloudy 2.5 to blisspop 4.0 and after wiping everything i flashed a various of radios bootstacks and etc to make it boot after many failed attempts to boot ( it boots up but after 4 or so seconds after the lg logo the screen turns black and doesnt turn back on until after i pull out the battery) it worked after i flashed the rom WITHOUT a custom kernel so naturally i booted up just fine and thought maybe now i set up everything on my phone and tweaks i should go back and flash a custom kernel i used to use (777 r16) but then it gave me the problem i faced before the black screen after the lg logo no kernal would work. THEN another problem arised similar to the freezing on the black screen randomly during a usage thru my day the phones screen would be unresponsive animations but touch wouldnt work and i know its not my screen cause when i flash back to cloudy it works fine the freezing happens at least every 5 mins. someone halp?
i know this thread is kinds old...
but i have this same issue too... I found if I switch batteries the problem isn't as bad... but, then it becomes bad again. Its weird. Before I swapped batteries I couldn't even login with my google account, after a fresh flash. then after I swapped batteries (gf has same phone) I was able to get through to the end and setup the phone. But, then an hour later it started happening again....
OP, did you find a solution?
warrior420 said:
i know this thread is kinds old...
but i have this same issue too... I found if I switch batteries the problem isn't as bad... but, then it becomes bad again. Its weird. Before I swapped batteries I couldn't even login with my google account, after a fresh flash. then after I swapped batteries (gf has same phone) I was able to get through to the end and setup the phone. But, then an hour later it started happening again....
OP, did you find a solution?
Click to expand...
Click to collapse
i actaully did i think one of the problems was maybe flashing over the same kernel? see what happened was after i gave up flashing the kernel i just flashed without it and to my surprise the build actually came with the kernel pre-installed...shocker and so i had no need to flash over the kernel that i wants because the maker of g3 tmo blisspop already had it in his build and it boots up fine( DISCLAIMER: i cant say this about other roms because the only one i actually tested and wanted was blisspop)
thelgog said:
i actaully did i think one of the problems was maybe flashing over the same kernel? see what happened was after i gave up flashing the kernel i just flashed without it and to my surprise the build actually came with the kernel pre-installed...shocker and so i had no need to flash over the kernel that i wants because the maker of g3 tmo blisspop already had it in his build and it boots up fine( DISCLAIMER: i cant say this about other roms because the only one i actually tested and wanted was blisspop)
Click to expand...
Click to collapse
Okay.
Well, when I was flashing I never flashed a kernel.
Ill be getting a brand new Anker Battery in the mail today. Ill report my findings.
I ended up going to a stock based rom and the issue never happened. So I stuck with it. Ill have to do some testing later and ill let you know how the battery works.
It's not the battery
I downgraded my T-Mo G3 since I couldn't root it with LP on it. Went back to 4.4.2., rooted it, TWRP'd it, and installed the latest CM12 Nightly, Gapps, SU, etc.
As long as the sim card was OUT the installation was great on wifi only, As soon as I put it in it shut off right after, or during boot up. Take the sim out and it works. And yes, the only way to get back into recovery was pulling the battery and doing the key press to recovery. Mystified.
If I find out anything, I'll post it here.
I'd say do a complete return to stock, upgrade via LG Mobile Support tool all the way to 20G, see how it works stock for a while. Then root ( http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197 using the first method) and see what happens.

Categories

Resources