Related
hello dear sir
i have ASUS Fonepad 7 FE170CG
so i download
all firmware from here
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_FE170CG/HelpDesk_Download/
but can not know how to flsah my device
plz help thanx
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
nokia alkng said:
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
Click to expand...
Click to collapse
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
edors said:
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
Click to expand...
Click to collapse
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
vks.sud said:
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
Click to expand...
Click to collapse
Rename your downloaded firmware to K012_sdupdate.zip then copy to your MICROSD. Now you just have to go into droidboot mode.
Follow the step below to go into droidboot. (Start by turn off your device).
1. If you had never update to kitkat before, go into droidboot by holding VOL DOWN + POWER until droidboot menu is present.
2. If you have update to kitkat before (or currently on kitkat), boot into droidboot by holding VOL UP + POWER until menu is present.
Next step depend on menu that appear on your droidboot menu:
1. If you had SD UPDATE option presented on the MOST BELOW option, go on and select it. (Beware, you should choose SD UPDATE not SD DOWNLOAD)
2. If your menu doesnt show SD UPDATE, then you had to choose RECOVERY.
I think thats all to do, your device must have start the update process by now.
CMIIW
But there is no recovery mode in this device like cwm or twrp..............
have a look.....
in the video below i have started in recovery without puting the firmware archieve in sdcard....will it surely work...
and one thing more is there ant way to install cwm or twrp or any other recovery on this device......
Flash fonepad firmware
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Ali Erfani said:
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Click to expand...
Click to collapse
but this can be done when the device starts what if it is in bootloop or hang on boot logo
vks.sud said:
but this can be done when the device starts what if it is in bootloop or hang on boot logo
Click to expand...
Click to collapse
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
vks.sud said:
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
Click to expand...
Click to collapse
I mean before you had this problem. The fastboot menu is different for Android 4.3 and 4.4
I don't know if there is a custom ROM for this tablet or not!!!
Help! I cant access my fastboot, how can flash rom? Or is there a way to flash flashboot? Thanks
Everyime i turn on my device its just usb icon them turns off.
Thank You!
Your procedure worked perfectly.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
some thing wrong
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
alirezajalilii said:
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
Click to expand...
Click to collapse
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
HELP
neondragon1909 said:
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
Click to expand...
Click to collapse
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
What can i do if the device is unknown and fail to communicate with device?I follow the steps but ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2 cannot be install,0 files copied when installing adb and fastboot ?HELP!
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img)
I cannot find these three .img files.Where can i download them?
Hello, do you knw which rom without all the asus bloatware I could install ?
My fonepad 7 is rooted but when I uninstall the shiiite asus programs they come back on restart.
Please help <3
I did the procedure and now is with this screen
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
arthurmdiniz said:
i did the procedure and now is with this screen
Click to expand...
Click to collapse
where can i dl the three .img help!!!!!!!!!!
HoLA!
If you are here then you have probably bricked your redmi 1s
You need not worry about it. :good:
Just follow the steps mentioned below:
1) Download the adb.rar from the attachment.
2)Connect your brick to your computer using the usb and wait for the drivers to get installed.
3)Extract the adb.rar wherever you want.
|---------For flashing stock mi recovery copy the recovery.img from miRecovery folder to minimal adb and fastboot folder
4)---|
|---------For flashing TWRP recovery copy the recovery.img from TWRP folder to minimal adb and fastboot folder
5)Open minimal adb and fastboot folder and click on MAF.
6)A terminal window will open and then type "fastboot flash recovery twrp.img" (If you have copied twrp) or "fastboot flash recovery recovery.img" (If you have copied mi stock recovery)
7)The installation will be done and then type reboot-bootloader or just remove the battery and long press volup+power button to boot into recovery.
8) To flash rom and custom kernel(optional) then follow this link http://forum.xda-developers.com/red...rmance-ram-t3131851/post61500479#post61500479
-----------------------------------------------------------------------------NOTE---------------------------------------------------------------------------
For flashing official MIUI ROM you need official mi recovery and for developer miui and other custom rom you can use twrp.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
################################## HIT THANKS :silly: ################################
hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks
This is how I did it.
susbiction said:
hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks
Click to expand...
Click to collapse
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck
ThaiDude said:
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck
Click to expand...
Click to collapse
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you
fuat.meydan said:
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you
Click to expand...
Click to collapse
Try this guide by DerTech99
What i do need?
1.Usb Cable
2.The Zip File
Guide:
1.Download the zip and extract it!
2.Install the minimal fastboot and adb when you dont have it! (is included)
3.Copy the Stockrecovery.img to where you have fastboot installed!
4.Turn your phone off but be fast!
5.Press "Power + Volume down" for 5 Sec until the pinguin shows up!
6.And connect fast the usb cable to the phone good!
7.Then give followed commands in "Fastboot devices"
8.When your phone do show up yes? then your ready to rock
9.Type followed command in "Fastboot flash recovery Stockrecovery.img"
10.When its done type "Fastboot reboot"
11.Disconnect your usb cable and youre are done!
12.Enjoy!
P.S After that you can flash TWRP i put in the zip the latest file!
WARNING: this tutorial is specifically for the Redmi Note 4 [ Qualcomm Snapdragon ] variant. Attempt to try it on other devices may brick your phone.
It is slightly technical but a really easy procedure. So carry on only if you have the skill, patience and confidence. I will not be held responsible for your mistakes, because I have tried this on my device and it works perfectly fine.
***NOTE : All links have been disabled since I am a new user. I'll update them as soon as i am over the restriction. thanks for understanding. (Just google the file you want to download, and they'll easily be available )
This takes barely half hour if you have the proper skill and an unlocked bootloader.
So, let's start.
So there are some steps to be followed over here. You need to complete all of the below steps. Links to the files required will be given below.
1. You need an unlocked bootloader.
2. You need the ADB and Fastboot device drivers installed on your PC
3. The ZIP files required for flashing.
So You will need the Mi Flash tool and MiUnlock tool during the bootloader unlock process. ( The MiFlash tool is available for download. but you can download the MiUnlock tool only if you get the permission to unlock your bootloader from Mi. To apply for a bootloader unlock go here : en.miui.com/unlock )
Once the permission is obtained, download the MiUnlock Tool from the same link, and follow the instructions to unlock bootloader.
The unlocked bootloader is mandatory.
You have to follow all the steps given below once, you have an unlocked bootloader.
Before you perform the below steps, make sure you download the adb and fastboot for your Computer. Download them here : ( *** ) [ONLY FOR DEVICES RUNNING WINDOWS ]
Download the TWRP recovery file for Redmi Note 4 from here : ( *** )
NOTE: You can use either SuperSU or Magisk for rooting your phone. I personally prefer Magisk.
Download the SuperSU ZIP file from here : ( *** )
OR
Download the Magisk ZIP file from here : ( *** )
Once all these files are downloaded,
1> Place the SuperSU file OR Magisk file (whichever you choose) inside your internal storage directory of your mobile device.
2> Place the TWRP recovery file in the folder where the adb drivers (Platform Tools folder) have been downloaded on your computer. Then rename it as "twrp".
3>turn off your device. then switch it on by pressing the volume down button and the power button together.
leave the keys once your device vibrates. This will enable the fastboot mode. (For beginners, It will display a green coloured rabbit on your device with fastboot written ) Connect it to the PC once the fastboot mode is enabled.
4> Come back to your Computer and Open the folder where the adb drivers and the twrp recovery file is copied.
Hold down the Shift key on the keyboard and then right click in the empty space of the folder window.
There will be a menu that pops up with some options. You have to click " Open Command Window Here "
This will open up the terminal/cmd on your computer. (NOTE: Steps given for a PC running the Windows OS only. )
5> In the terminal you have to type a few commands. Again make sure your device is properly connected to the computer and with fastboot mode enabled.
Note: Connect only 1 device running fastboot.
To verify connected devices enter command " fastboot devices " This will show available fastboot devices with a string of letters or numbers.
After verification of connected device,
First enter the command " fastboot flash recovery twrp.img"
Then hit enter.
(twrp can change according to your twrp recovery file name, if you have renamed it as i said above, no wories, carry on)
6> The terminal will indicate completion of the command. once this is done, type in
"fastboot boot twrp.img"
7> You device will restart and the twrp recovery will pop up on your mobile. Now you can disconnect your device from the computer.
8> In the twrp recovery screen click on install, and select the supersu ZIP file OR magisk ZIP file which you had placed in your internal storage. Then swipe to confirm the flash. It will be indicated when the flash is completed.
Once it's done, click clear cache/dalvik and swipe to confirm.
And hit reboot.
Voila! You now have a rooted Redmi Note 4 with TWRP recovery installed.
[
If you install the magisk ZIP or SuperSU ZIP, under some rare circumstances the app might not have installed on the phone. So you might have to download the apk once the phone has started.
Grab the Magisk Manager APK file here ( *** )
Grab the SuperSU APK file here ( *** )
]
[NOTE :
All the steps are important to be followed exactly. Do not mess up the steps or you might brick your device.
Here unlocking the bootloader is key. Do not ignore my Bootloader unlock thread. Otherwise rooting isn't possible.
This thread is a bit long, sorry for that. But it's written in an easy way so it's better for the new users.
Hope this helps guys. Follow the thread accurately, and it'll work perfectly well on your device.
Cheers.
I bricked my phone after flahing EMUI 9.0 and subsequently First Ever ROM build 10/12/2018 as well. My phone was booting in to stock eRecovery only. Ofcourse I was able to boot in to bootloader / fastboot mode. I booked appointment with Huawei recommended service centre. I wanted to give one last try and finally gave life to my phone. Here is the steps that took through.
Note: These steps works for downgrading to EMUI 8.1 as well
For downgrading, skip all the steps and go to step 10 after flashing custom recovery explained in Step 7
Getting the device ready:
1. Download EMUI 9.0 from here https://pro-teammt.ru/firmware-database/?firmware_model=CLT-L29C432&firmware_page=0//
2. Unzip the file UPDATE.APP from Update.zip
3. Using EMUI extraction tool extract following image files (see step 4 below) from UPDATE.APP. Download tool from here https://www.androidfilehost.com/?fid=11410963190603873616
4. Extract, CUST.img, KERNEL.img, RECOVERY_RAMDIS.img and System.img and copy these files in the same folder where you have ADB tools. Download ADB tools from here: https://www.androidfilehost.com/?fid=11410963190603873622 Unzip files. You will find a file cmd-here.exe. Run this file to get to open command prompt in your PC to the same folder where you have this ADB tools extracted.
5. Put your phone in to Fastboot mode (Switch off your phone, Press and hold volumn down button and connect USB with PC)
6. Flash the image files in the same order with fastboot commands as below,
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash system system.img
7. Now flash custom recovery. Download custom recovery from here https://www.androidfilehost.com/?fid=11410963190603866808
Fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte-mod.img
8. Now restart your device with command below,
fastboot reboot
As soon issued this command, pull out of USB cable and keep holding volume up button until HUAWEI logo comes up disappear. It will now boot in to TWRP recovery.
9. Check file names in TWRP (Advanced > File Manager) are readable under folder sdcard. If file names are appearing as a junk, it means that you need to decrypt your data partition. Follow the steps below,
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
>> Download and copy RemoveEncryption-P20Pro.zip file in to sdcard folder (Internal storage). This file can be downloaded from here https://www.androidfilehost.com/?fid=11410963190603866806
>> Flash RemoveEncryption-P20Pro.zip
>> Hit home button and Reboot > Recovery
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
NOW YOU ARE READY TO FLASH OFFICIAL EMUI 8.1 OR 9.0 (as you like). You have no root exploit available for 9.0 at the moment and also Google Pay will see the device as rooted because of unlocked bootloader.
10. Follow the steps below,
## Download the EMUI version that you need from the link https://pro-teammt.ru/firmware-database/?firmware_model=CLT-L29C432&firmware_page=0/
## Rename the file update_full_CLT-L29_hw_eu.zip in to update_all_hw.zip
## Create a folder ZIPS-HERE in the same folder where you have ADB tools (as explained in the section above) and put both update.zip and update_all_hw.zip in this ZIP-HERE folder.
## Download update_data_public.zip for EMUI 8.1 from this LINK and copy to the same ZIPS-HERE folder. You do not require update_data_public.zip for EMUI 9.0
## Download this nocheck.img file and copy it in to the same folder ZIPS-HERE. link here: https://www.androidfilehost.com/?fid=11410963190603873636
## Issue following commands (you can copy and paste in the command window)
adb shell twrp decrypt
adb push ZIPS-HERE/update.zip /data/update/HWOTA/update.zip
adb push ZIPS-HERE/update_all_hw.zip /data/update/HWOTA/update_all_hw.zip
adb push ZIPS-HERE/update_data_public.zip /data/update/HWOTA/update_data_public.zip (this command line is not required for EMUI 8.1)
adb push ZIPS-HERE/nocheck.img /data/update/nocheck.img
adb shell "echo --update_package=/data/update/HWOTA/update.zip > /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_all_hw.zip >> /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_data_public.zip >> /cache/recovery/command"
adb shell dd if=/data/update/nocheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
adb reboot recovery
WAIT AND WATCH THE FLASHING HAPPENING VIA HUAWEI eRecovery. Once done, restart your phone. Your phone is back to life.
So far I have soft bricked several times in the past few days and brought back to life. As long as Bootloader (fastboot) partition is not disturbed, we are good to recover our device.
..
Thank you very useful when needed
smohanv said:
I bricked my phone after flahing EMUI 9.0 and subsequently First Ever ROM build 10/12/2018 as well. My phone was booting in to stock eRecovery only. Ofcourse I was able to boot in to bootloader / fastboot mode. I booked appointment with Huawei recommended service centre. I wanted to give one last try and finally gave life to my phone. Here is the steps that took through.
Getting the device ready:
1. Download EMUI 9.0 from here http://pro-teammt.ru/firmware-databa...rmware_page=0/
2. Unzip the file UPDATE.APP from Update.zip
3. Using EMUI extraction tool extract following image files from UPDATE.APP. Download tool from here https://www.androidfilehost.com/?fid...63190603873616
4. Extract, CUST.img, KERNEL.img, RECOVERY_RAMDIS.img and System.img and copy these files in the same folder where you have ADB tools Download ADB tools from here: https://www.androidfilehost.com/?fid...63190603873622 Unzip files. You will find a file cmd-here.exe. Run this file to get to open command prompt in your PC to the same folder where you have this ADB tools extracted.
5. Put your phone in to Fastboot mode (Switch off your phone, Press and hold volumn down button and connect USB with PC)
6. Flash the image files in the same order with fastboot commands as below,
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash system system.img
7. Now flash custom recovery. Download custom recovery from here https://www.androidfilehost.com/?fid...63190603866808
fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte-mod.img
8. Now restart your device with command below,
fastboot reboot
As soon issued this command, pull out of USB cable and keep holding volume up button until HUAWEI logo comes up disappear. It will now boot in to TWRP recovery.
9. Check file names in TWRP (Advanced > File Manager) are readable under folder sdcard. If file names are appearing as a junk, it means that you need to decrypt your data partition. Follow the steps below,
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
>> Download and copy RemoveEncryption-P20Pro.zip file in to sdcard folder (Internal storage). This file can be downloaded from here https://www.androidfilehost.com/?fid...63190603866806
>> Flash RemoveEncryption-P20Pro.zip
>> Hit home button and Reboot > Recovery
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
NOW YOU ARE READY TO FLASH OFFICIAL EMUI 8.1 OR 9.0 (as you like). You have no root exploit available for 9.0 at the moment and also Google Pay will see the device as rooted because of unlocked bootloader.
Follow the steps below,
## Download the EMUI version that you need from the link http://pro-teammt.ru/firmware-databa...rmware_page=0/
## Rename the file update_full_CLT-L29_hw_eu.zip in to update_all_hw.zip
## Create a folder ZIPS-HERE in the same folder where you have ADB tools (as explained in the section above) and put both update.zip and update_all_hw.zip in this ZIP-HERE folder.
## Download update_data_public.zip from this link and copy to the same ZIPS-HERE folder https://www.androidfilehost.com/?fid...63190603873656
## Download this nocheck.img file and copy it in to the same folder ZIPS-HERE. link here: https://www.androidfilehost.com/?fid...63190603873636
## Issue following commands (you can copy and paste in the command window)
adb shell twrp decrypt
adb push ZIPS-HERE/update.zip /data/update/HWOTA/update.zip
adb push ZIPS-HERE/update_all_hw.zip /data/update/HWOTA/update_all_hw.zip
adb push ZIPS-HERE/update_data_public.zip /data/update/HWOTA/update_data_public.zip
adb push ZIPS-HERE/nocheck.img /data/update/nocheck.img
adb shell "echo --update_package=/data/update/HWOTA/update.zip > /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_all_hw.zip >> /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_data_public.zip >> /cache/recovery/command"
adb shell dd if=/data/update/nocheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
adb reboot recovery
WAIT AND WATCH THE FLASHING HAPPENING VIA HUAWEI eRecovery. Once done, restart your phone. Your phone is back to life.
Click to expand...
Click to collapse
Luis2k33-XDA said:
Thank you very useful when needed
Click to expand...
Click to collapse
Now I am very confident to mess my Huawei P20 Pro as I have been bringing to life several times in the last two days.
smohanv said:
Now I am very confident to mess my Huawei P20 Pro as I have been bringing to life several times in the last two days.
Click to expand...
Click to collapse
Out of curiosity what model do you have?
the links https://androidfilehost.com/?fid...63190603873656 & https://androidfilehost.com/?fid...63190603873636 not working
smohanv said:
Now I am very confident to mess my Huawei P20 Pro as I have been bringing to life several times in the last two days.
Click to expand...
Click to collapse
Luis2k33-XDA said:
the links https://androidfilehost.com/?fid...63190603873656 & https://androidfilehost.com/?fid...63190603873636 not working
Click to expand...
Click to collapse
All fixed just now. Please try.
forever_lol said:
Out of curiosity what model do you have?
Click to expand...
Click to collapse
CLT-L29C432 Huawei P20 Pro
smohanv said:
All fixed just now. Please try.
Click to expand...
Click to collapse
***
nope, i cant see nothing to download, by the way, do you know a way to install emui9 from emui8 with bootloader locked?
now working the links, thanks
Luis2k33-XDA said:
***
nope, i cant see nothing to download, by the way, do you know a way to install emui9 from emui8 with bootloader locked?
Click to expand...
Click to collapse
Sorry. I have not heard of a method to update in locked bootloader devices.
smohanv said:
CLT-L29C432 Huawei P20 Pro
Click to expand...
Click to collapse
Thank you
smohanv said:
I bricked my phone after flahing EMUI 9.0 and subsequently First Ever ROM build 10/12/2018 as well. My phone was booting in to stock eRecovery only. Ofcourse I was able to boot in to bootloader / fastboot mode. I booked appointment with Huawei recommended service centre. I wanted to give one last try and finally gave life to my phone. Here is the steps that took through.
Note: These steps works for downgrading to EMUI 8.1 as well.
Getting the device ready:
1. Download EMUI 9.0 from here https://pro-teammt.ru/firmware-database/?firmware_model=CLT-L29C432&firmware_page=0//
2. Unzip the file UPDATE.APP from Update.zip
3. Using EMUI extraction tool extract following image files (see step 4 below) from UPDATE.APP. Download tool from here https://www.androidfilehost.com/?fid=11410963190603873616
4. Extract, CUST.img, KERNEL.img, RECOVERY_RAMDIS.img and System.img and copy these files in the same folder where you have ADB tools. Download ADB tools from here: https://www.androidfilehost.com/?fid=11410963190603873622 Unzip files. You will find a file cmd-here.exe. Run this file to get to open command prompt in your PC to the same folder where you have this ADB tools extracted.
5. Put your phone in to Fastboot mode (Switch off your phone, Press and hold volumn down button and connect USB with PC)
6. Flash the image files in the same order with fastboot commands as below,
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash system system.img
7. Now flash custom recovery. Download custom recovery from here https://www.androidfilehost.com/?fid=11410963190603866808
Fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte-mod.img
8. Now restart your device with command below,
fastboot reboot
As soon issued this command, pull out of USB cable and keep holding volume up button until HUAWEI logo comes up disappear. It will now boot in to TWRP recovery.
9. Check file names in TWRP (Advanced > File Manager) are readable under folder sdcard. If file names are appearing as a junk, it means that you need to decrypt your data partition. Follow the steps below,
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
>> Download and copy RemoveEncryption-P20Pro.zip file in to sdcard folder (Internal storage). This file can be downloaded from here https://www.androidfilehost.com/?fid=11410963190603866806
>> Flash RemoveEncryption-P20Pro.zip
>> Hit home button and Reboot > Recovery
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
NOW YOU ARE READY TO FLASH OFFICIAL EMUI 8.1 OR 9.0 (as you like). You have no root exploit available for 9.0 at the moment and also Google Pay will see the device as rooted because of unlocked bootloader.
Follow the steps below,
## Download the EMUI version that you need from the link https://pro-teammt.ru/firmware-database/?firmware_model=CLT-L29C432&firmware_page=0/
## Rename the file update_full_CLT-L29_hw_eu.zip in to update_all_hw.zip
## Create a folder ZIPS-HERE in the same folder where you have ADB tools (as explained in the section above) and put both update.zip and update_all_hw.zip in this ZIP-HERE folder.
## Download update_data_public.zip from this link and copy to the same ZIPS-HERE folder
## Download this nocheck.img file and copy it in to the same folder ZIPS-HERE. link here: https://www.androidfilehost.com/?fid=11410963190603873636
## Issue following commands (you can copy and paste in the command window)
adb shell twrp decrypt
adb push ZIPS-HERE/update.zip /data/update/HWOTA/update.zip
adb push ZIPS-HERE/update_all_hw.zip /data/update/HWOTA/update_all_hw.zip
adb push ZIPS-HERE/update_data_public.zip /data/update/HWOTA/update_data_public.zip
adb push ZIPS-HERE/nocheck.img /data/update/nocheck.img
adb shell "echo --update_package=/data/update/HWOTA/update.zip > /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_all_hw.zip >> /cache/recovery/command"
adb shell "echo --update_package=/data/update/HWOTA/update_data_public.zip >> /cache/recovery/command"
adb shell dd if=/data/update/nocheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
adb reboot recovery
WAIT AND WATCH THE FLASHING HAPPENING VIA HUAWEI eRecovery. Once done, restart your phone. Your phone is back to life.
So far I have soft bricked several times in the past few days and brought back to life. As long as Bootloader (fastboot) partition is not disturbed, we are good to recover our device.
..
Click to expand...
Click to collapse
I dont see the CUST.img in UPDATE.APP
MikeYT22 said:
I dont see the CUST.img in UPDATE.APP
Click to expand...
Click to collapse
Found it
If:
I bricked my phone after flahing EMUI 9.0 and subsequently First Ever ROM build 10/12/2018 as well. My phone was booting in to stock eRecovery only. Ofcourse I was able to boot in to bootloader / fastboot mode. I booked appointment with Huawei recommended service centre. I wanted to give one last try and finally gave life to my phone. Here is the steps that took through.
Click to expand...
Click to collapse
There's no need:
Getting the device ready:
1. Download EMUI 9.0 from here https://pro-teammt.ru/firmware-datab...mware_page=0//
2. Unzip the file UPDATE.APP from Update.zip
3. Using EMUI extraction tool extract following image files (see step 4 below) from UPDATE.APP. Download tool from here https://www.androidfilehost.com/?fid...63190603873616
4. Extract, CUST.img, KERNEL.img, RECOVERY_RAMDIS.img and System.img and copy these files in the same folder where you have ADB tools. Download ADB tools from here: https://www.androidfilehost.com/?fid...63190603873622 Unzip files. You will find a file cmd-here.exe. Run this file to get to open command prompt in your PC to the same folder where you have this ADB tools extracted.
5. Put your phone in to Fastboot mode (Switch off your phone, Press and hold volumn down button and connect USB with PC)
6. Flash the image files in the same order with fastboot commands as below,
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash system system.img
Click to expand...
Click to collapse
Only need to:
7. Now flash custom recovery. Download custom recovery from here https://www.androidfilehost.com/?fid...63190603866808
Fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte-mod.img
8. Now restart your device with command below,
fastboot reboot
As soon issued this command, pull out of USB cable and keep holding volume up button until HUAWEI logo comes up disappear. It will now boot in to TWRP recovery.
9. Check file names in TWRP (Advanced > File Manager) are readable under folder sdcard. If file names are appearing as a junk, it means that you need to decrypt your data partition. Follow the steps below,
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
>> Download and copy RemoveEncryption-P20Pro.zip file in to sdcard folder (Internal storage). This file can be downloaded from here https://www.androidfilehost.com/?fid...63190603866806
>> Flash RemoveEncryption-P20Pro.zip
>> Hit home button and Reboot > Recovery
>> Wipe > Format data
>> Hit home button and Reboot > Recovery
Click to expand...
Click to collapse
Later recovery mode nad push files in external memory:
Flash OTAs with HuRUpdater and benefit.
update.zip
update_all_hw.zip (if the downloaded file has different name then rename to update_all_hw.zip)
Reboot and Voilà
dzupert said:
If:
There's no need:
Only need to:
Later recovery mode nad push files in external memory:
Flash OTAs with HuRUpdater and benefit.
update.zip
update_all_hw.zip (if the downloaded file has different name then rename to update_all_hw.zip)
Reboot and Voilà
Click to expand...
Click to collapse
Well done. Good approach splitting the sections of the guide. Thanks.
MikeYT22 said:
Found it
Click to expand...
Click to collapse
Can't see CUST.img, where did you found it?
Thx
dexxa05 said:
Can't see CUST.img, where did you found it?
Thx
Click to expand...
Click to collapse
Did you download 9.0.x.x.xx smtn like that or 8.0.x.x.xx?
MikeYT22 said:
Found it
Click to expand...
Click to collapse
MikeYT22 said:
Did you download 9.0.x.x.xx smtn like that or 8.0.x.x.xx?
Click to expand...
Click to collapse
9.0.x...
dexxa05 said:
9.0.x...
Click to expand...
Click to collapse
Umm...you got discord so we can talk easily?
Hi all,
I think i have bricked my phone, i can boot on fastboot but not in TWRP... Any help ?