Develop Bugs

Waiting for Galaxy Note black TPU case with stand

I have been using these on my Galaxy S2 and Tab. I didn't like the idea when I was browsing for a new case on Ebay, but when I got it, I soon changed my mind!
If anyone finds anything like it then please post on this thread!
http://www.ebay.co.uk/itm/Gel-TPU-C..._MobilePhonesCasesPouches&hash=item43a90b8802

looks like a great idea....but i think i would prefer if the clear stand part be black or grey in colour instead

They come in many different colours and styles. And with stand / without stand

I found something very similar (or identical):
http://www.alibaba.com/product-gs/522134318/S_Line_Crystal_Plastic_TPU_Protector.html
There are other variants on alibaba, the only problem is that the minimum quantity is usually 50-100 pieces :-/
EDIT: found it on ebay: http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9

I bought one before seeing this thread.
When I receive it, I'll tell you if its good/bad etc

when i find something good
，will let you know

I searched on ebay for "galaxy note kickstand case TPU" and got a result:
http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9
I eneded up ordering for around $8 the kickstand case with included car charger and 3 screen protectors. Will reply here with a review here once I get it.

I bought one of these too. I figure you can't go wrong for $5.
Sent from my GT-N7000 using Tapatalk

For $8 I got a car charger, 3 screen protectors and the case.
The case:
Black TPU and Grey Silicon.
Kickstand is Silicon and a part of the case's mainframe.
The Kickstand works well.
The TPU is knife-proof and tamper proof, but dont drop it from a 2.5+ metre height.
The TPU has textured sides which help with grip A LOT.
All the holes and ports (pen) are easily accessible.
The buttons are covered but NOT hard to press.
Whole case is quite thin, so its not very "drop proof" but very resistant to heat and cuts.
Did I say it is thin, so it still fits in my pockets easily.
Verdict: 9/10
This has replaced my Carbon Fibre case (which was protective). This case is a MUST HAVE for any NOTE owners.
Sidenote: I also bought the GPS holder ($6) from the same seller "telegaming", it is also a high quality piece.

Nillkin Fruit/Fresh: Reviews?

Hey guys, I'll make this short and sweet. I've been looking around the boards for a few weeks for a simple flip cover that wont break the bank or damage my phone.
All I need is a good fit, earpiece hole and sleep/wake function (not spending $50 on the official LG flip cover though)
I came across this one on amazon:
http://www.amazon.ca/Nillkin-Fruit-...2338300&sr=8-1&keywords=Nexus+5+Nillkin+fruit
I haven't seen any reviews of this case other than a single sentence saying they didn't like the thickness and it is only one person's opinion.
Has anyone else had experience with this case? I'm mostly concerned about the polycarbonate inside scratching the corners of my Nexus.
Any input on this case is appreciated, but I am also open to other suggestions for cases that meet the above criteria.
Thank you!

I just got this in the mail today. Only $7.99 shipped from this seller:
http://www.ebay.com/itm/271320259952
I've always liked Nillkin products. Good quality stuff. This case is no exception. I got the black one. The case is a glossy polycarbonate. Fairly thick. It's a gunmetal metallic color. The flip cover is a sturdy leather like cover. The magnetic closure works really well. Sleep/Wake works great. The design of the magnetic closure reminds me of the great Poetic cases for tablets. The entire case gives the phone some weight and a very premium feel and look. Wireless charging works fine with the case on. I think it's better than the LG case and for only $7.99!

Hello
The serial number of the Nillkin Fresh Fruit can be used on a single device? I've first tested the case on my phone but now I want to use it on another phone. On the second phone it does not accept the serial number. What can I do ?

[Video] TPU case shootout for the OnePlus one

Hey Everyone-
Hope you all have been enjoying the videos. I mentioned in a video i was considering doing a TPU case shootout and you guys let me know that would be appreciated so ... here you go!
For additional OnePlus and technology videos, check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on I [Video] OnePlus One quick thoughts I [Video] OnePlus One Clear Case unboxing and hands-on I [Video] OnePlus One FlipCover unboxing and hands-on I [Video] DayJoy Aluminium bumper for the OnePlus One I [Video] IMAK Crystal clear case for the OnePlus One. I [Video] Cruzerlite TPU case for the OnePlus One I [Video] OnePlus One extended review. I [Video] Tudia lite case for the OnePlus One. I [Video] Boxwave minimus case for the OnePlus OneI [Video] Diztronic TPU case for the OnePlus OneI [Video] Boxwave Blackout TPU case for the OnePlus One

Good job.......totally agree with the Tudia and Diz reviews......

Great review, I've seen reviews saying that the Boxwave Blackout cracks and chips after little use or removing it from the phone a couple of times, can anyone confirm this? That's the one I like the most. Thanks.
Sent from my A0001 using Tapatalk

I have the nillkin case, not in your review but it has cut outs for the power and volume. Great fit even with tempered glass it still has a small gap. I couldn't say its a dime distance since I'm in the uk but even with the glass there is still a 1 mm gap. Cheap and seems OK so far.
Also have a diztronic on the way and an official OnePlus tpu. Who knows may do another mini review once they all arrive.

disk0360 said:
I have the nillkin case, not in your review but it has cut outs for the power and volume. Great fit even with tempered glass it still has a small gap. I couldn't say its a dime distance since I'm in the uk but even with the glass there is still a 1 mm gap. Cheap and seems OK so far.
Also have a diztronic on the way and an official OnePlus tpu. Who knows may do another mini review once they all arrive.
Click to expand...
Click to collapse
None of the cases included in this video are PC, they are all TPU. The nillkin case is PC. All PC cases have cutout buttons because PC doesn't flex its made for abrasion protection. I have reviewed a couple of PC cases on my channel if you want to check them out, the BoxWave minimus, the official 1+ cover, and the nillkin PC case video will be live soon.
A PC case will be much much more friendly towards screen protectors. TPU cases will be more likely to push against the sides of the glass and cause bubbles.
The Nillkin PC case is surprisingly high quality. Like, really high quality ::cough:: better than the official case ::cough::
I'm lookin forward to your review. No matter how many accessories I own I always always read and watch other reviews too. I think we have a sickness

What was your favorite case amongst all the ones you tried, regardless of material?

KuduIO said:
What was your favorite case amongst all the ones you tried, regardless of material?
Click to expand...
Click to collapse
hmmmmm ..... man that's tough. I'll answer it without answering it. Here's my personal thought process behind this question.
1) I don't drop my phone very often. One broken phone in 10+ years and I'm comfortable replacing parts on my own phone if need be, so impact resistance isn't too important to me. This means TPU cases and combination PC/silicone/TPU type cases ( think otterbox) are more than what i need.
Plus if i did blow up a phone beyond repair, I've got more phones.
2) I prefer a slim design case. Since all i need is abrasion protection, I don't want to add too much fat to my phone.
3) I like texture. I don't want to add a case which is slippery because that defeats point #1 cause i might drop my phone
So right now I'm really liking the Nillkin snap on PC case. It's what's currently on my phone. Ask me again in a week and it might be a different case but my logic above remains the same.
Hope that helps.

KSmithInNY said:
hmmmmm ..... man that's tough. I'll answer it without answering it. Here's my personal thought process behind this question.
1) I don't drop my phone very often. One broken phone in 10+ years and I'm comfortable replacing parts on my own phone if need be, so impact resistance isn't too important to me. This means TPU cases and combination PC/silicone/TPU type cases ( think otterbox) are more than what i need.
Plus if i did blow up a phone beyond repair, I've got more phones.
2) I prefer a slim design case. Since all i need is abrasion protection, I don't want to add too much fat to my phone.
3) I like texture. I don't want to add a case which is slippery because that defeats point #1 cause i might drop my phone
So right now I'm really liking the Nillkin snap on PC case. It's what's currently on my phone. Ask me again in a week and it might be a different case but my logic above remains the same.
Hope that helps.
Click to expand...
Click to collapse
Very useful information, thanks. Just wondering, have you also tried the Pelosi case? It's what I'm thinking of getting and it seems like it would really satisfy your requirements.

Has anyone tried the Orzly TPU? Is there a lip on the TPU case? if so, how thick is the lip?

KSmithInNY said:
None of the cases included in this video are PC, they are all TPU. The nillkin case is PC. All PC cases have cutout buttons because PC doesn't flex its made for abrasion protection. I have reviewed a couple of PC cases on my channel if you want to check them out, the BoxWave minimus, the official 1+ cover, and the nillkin PC case video will be live soon.
A PC case will be much much more friendly towards screen protectors. TPU cases will be more likely to push against the sides of the glass and cause bubbles.
The Nillkin PC case is surprisingly high quality. Like, really high quality ::cough:: better than the official case ::cough::
I'm lookin forward to your review. No matter how many accessories I own I always always read and watch other reviews too. I think we have a sickness
Click to expand...
Click to collapse
Actually the unique design of the OPO doesn't push the case against the screen so you're safe, I do have a TPU case(as I has to my previous Desire HD phone ..no issues)
P.S. I do have tempered glass in the OPO which is way better but still in my DHD I has matte film which was nice(there still didn't have any issues with bubbles and do mind I'm a perfectionist..)

Thanks for the vid, very useful!

[Q] Bumper Cases?

Hey, I'm looking for a bumper case for my One. (I really want to be able to feel the back of my phone - it's so nice.
The ones I've seen have some reviews of scratching the back plate. I was wondering if anyone had any experiences with any that were solid?

Take a look on amazon, a majority of the cool stuff I purchased for my One has been from there.

You could use Sugru (google it).

I've heard that the Aluminum ones are supposed to be pretty good and can protect your sides from impact, however apparently they scratch the metal frame surrounding the OPO.

case suggestion

I should be receiving my new device next week :laugh:and I can't decide what case to pickup.
I use a magnetic phone mount in my car so I will have to put the magnetic plate between my device and the cell phone case. That being said anything with a transparent back is out of the question. If the case has legs it would be ideal as well. I work at a desk all day and I would rather not have it wobbling around if I'm trying to use it while it's on my desk.
I have used a UAG case on my S5 for the past two years and I was very happy with it. Right now I'm considering the TUDIA Slim-Fit HEAVY DUTY [MERGE] Extreme. Any other suggestions would be greatly appreciated.

Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?

ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
That's a good point. I guess we will find out soon enough!
The TUDIA case I mentioned above is a 2 piece case so I was planning on putting the metal place between the two parts of the case that way the metal plate doesn't have to physically touch my device.
Otherwise I'm probably going to at the very least place a small piece of paper between the metal plate and my device to prevent it from scratching the rear of my device.

Aluminum generally isn't magnetic, and I'd be slightly afraid to put a magnet right onto the phone and risk damaging some internals. I'm going with the Spigen Neo Hybrid, and will likely put the plate on the phone itself as well.

I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.

Generally I prefer clear case and put some good pictures on the back.

all oneplus3 accesories are compatible just goto oneplus3 forum and check it out

ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
Aluminium is not magnetic ...

Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......

I ended up ordering the Spigen Neo Hybrid as well. I will let you guys know it fits with the metal place once I receive it next week.

cultofluna said:
Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......
Click to expand...
Click to collapse
I watched a YouTube video and they made it look like a breeze. But to get it perfect I think would be very difficult and stressful. But when successful it's well worth it in my mind. One imperfection would just flip me out

LMcR92 said:
I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.
Click to expand...
Click to collapse
Let me know if the screen protector fits.
Already have the spigen case, just not sure if it works with the curved screen protector.

I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.

jemeljsh said:
I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.
Click to expand...
Click to collapse
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk

I have a friend who bought and likes the Spigen Neo Hybrid case, and I bought the OtterBox. I personally prefer the OtterBox, but the Neo Hybrid case looks pretty nice too.

Picked up the Cruzerlite Spartan case for my 3T. Got it yesterday and seems like it'll be a good rugged case. It's also not to thick. Get to try it when the phone finally gets here tomorrow.
Edit: posted the onepluse2 case but they do have it for the 3T also.

kirdroid said:
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I usually go without cases but with the camera bump on 3T it makes me too cautious when putting down the phone on the table. Original Karbon Case does not create too much bulk as its quite slim and in the same time it does protect the camera and actually it has bumps on the front (corners) so you can put it face down too and not worry about scratches.

I bought Ringke Fusion. Awesome case. It has nice clicky buttons.
https://www.amazon.com/OnePlus-Ring...=1480301837&sr=8-1&keywords=ringke+oneplus+3t

I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.

GiSS88 said:
I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.
Click to expand...
Click to collapse
I ordered that one too but not available to me till 2nd of December so I have this till then.