[KERNEL][BETA]CM 12.1 fix offline charging v1.3 (thread reopened) - Galaxy S3 Neo Android Development

THREAD CLOSED
now the changelog are in the second post (inserted in sliding lists)
THE RED TEXT AT BOOT IT'S NORMAL (kernel is not seandroid enforcing)
I have extracted the kernel of the 18.5.2015 build of CyanogenMod 12.1 ROM that I still found on my pc. this kernel does not know what but when you flash, you can charge the phone when it is off (offline charging is fixed)
installation procedure (recommended for CWM recovery):
1) download the "kernel 12-1 cm fixed offline charging.img"
2) download "Flashify_FULL_v1-9-2.apk"
3) flash the kernel image with the app "flashify
4) reboot the device
it is not necessary to wipe the Dalvik cache / cache, the next boot is equal to all others.
those with any version of TWRP recovery may also flash conveniently selecting "install zip" and the lower right corner select IMAGE. (After select "boot")
This kernel can also be flashed in the resurrection remix and blisspop and an other ROM based on cyanogenmod running 5.1.1 (100% fix the offline charging)
I recommend making a backup before changing the device's kernel
thanks for your installation
(press thanks if you fix the offline charging and not have problem)
kernel info:
Status:BETA(work)
OS version: only for 5.1.1
Linux version: 3.4.0
based on: cyanogenmod 12.1
data build: Mon May 14:27:02 CEST 2015
gcc version: 4.8
min freq CPU: 300 MHz
max freq CPU: 1401 MHz
min freq GPU: 200 MHz
max freq GPU: 450 MHz
Device:
GT-19301I work
GT-19301IQ don't tested
BUG:
WiFi doesn't work:
if you find other bug write a comment
[POSSIBILE FIX FOR WIFI](100% testing but not dangerous):
in the version 1.1 the "modules" can also be flashed with any recovery you have (I do not guarantee to 100%), I tried to flash with the TWRP and have successfully flashed the fix which contains the modules.
the difference of the "1st wifi fix" and "2nd wifi fix" is that the former contains the "modules" of the build 5.18.2015 from where I extracted the kernel while the second contains the "modules" of last build (25-12-2015 of rox). you try the first fix, if it does not work try the second. if you want to create a fix do it and how, if you have one working with this kernel share it and publish it on the thread. thanks for your testing
v1.2:
-added a fix with folders (/system/etc/firmware/wlan) e (/system/etc/wifi) with modules of build 18-5-15 relative of wifi when possibile can improve the fix (download file "1.2 wifi fix(FLASHABLE).zip" in "attach files")
recommended installation:
download the wifi fix in "attach files" at the end of thread
flash the zip with your recovery o the app flashify (you can find the app also in '"attach files"
reboot the device (do not wipe the dalvik cache, it is not necessary )
if you try manually to put the modules on system, download the "modules" folder (folder "modules.zip" and "modules folder last (build 25-12-15) (not for flashing).zip" in "attach files") extract the zip with any zip extractor and put in this folder(and not on the other side):
/ system / lib /
after, reboot the device
[/LIST]
if the wifi fix works great press "thanks" of the thread, if you have any problems please write a comment and try to solve it
FUTURE NEWS:
-if the renix63's kernel will be fixed thanks to this successfully and has no other bugs, I do not think that I continue with my updates.
-i'm trying to port the offline charging of galaxy s6 (animation on charge) to our cyanogenmod 12.1 (only) stay tuned
OTHER KERNEL VERY BEAUTIFUL FOR CM12.1 AND ROM BASED ON THEM:
(RENIX63): Renix Kernel
(N1KOLAA): N1KOLAA Kernel
OTHER CUSTOM KERNEL:
STOCK ROM (ONLY):
for stock rom's lover exits a special custom kernel to have performance very good and haven't fast battery drain. you can use this kernel for stock rom. this kernel overclock the cpu and gpu.DOWNLOAD CUSTOM KERNEL FOR STOCK ROM
MOTION ROM (and based on them):
for motion rom user (or rom based), you can use the "xmotion" kernel of renix63. it work very good. have cpu and gpu overclocked and haven't fast battery drain DOWNLOAD "XMOTION" KERNEL
CYANOGENMOD (and based on them):
for cyanogenmod 12.1 user (and rom based on them ) exist a very good custom kernel that also overclock cpu and gpu and have low consumption:laugh:. i recommend to install this kernel if you use the cyanogenmod 12.1 rom (or based on it). DOWNLOAD KERNEL NEOX

STATUS THREAD: THREAD IS CLOSED
CHANGELOG:
ATTUAL VERSION:
Code:
v1.3:
- reopened the thread, apply some changes
- apply some changes at changelogs: show only changelog if you want see
- added link of another kernel for Every rom
- no updates for this kernel, you install the kernel in link on thread because they work very good. I'm work for port the s6 offline charging animation in remix kernel for cm 12.1; I DON'T APPLY ANY CHANGES TO KERNEL BUT ONLY OFFLINE CHARGING STYLE ANIMATION!
OLD VERSION:
Code:
v1.0:
-initial release
v1.1:
-you can flash the wifi fix with any recovery (testing)
-now there are a new fix zip file
v1.2:
-added a new fix when can improve the wifi fix
NEXT VERSION:
Code:
v1.∆ (.../.../...):
- for cm 12.1 kernel you can use the kernel of n1kolaa or renix63, they work very well. i recommend
- [STRIKE]I try to bring the offline charging of galaxy s6 for cm 12.1[/STRIKE] there is a project than i trying to port
- flash my kernel and WiFi fix TOGHETER! [B]I'M NOW WORKING ON THEM[/B]

can you shere sources what you edited?

Counter notification on cm 12.1 works? Like whatsapp with the number of notification is on the icon

n1kolaa said:
can you shere sources what you edited?
Click to expand...
Click to collapse
Yes this evening

It's the may kernel, nothing of new...

n1kolaa said:
can you shere sources what you edited?
Click to expand...
Click to collapse
Yes, this evening i'm will try to extract the source

wetito said:
It's the may kernel, nothing of new...
Click to expand...
Click to collapse
has nothing new but this kernel really fix the offline charging, I have uploaded this kernel for people who want to fix offline charging

But this kernel have some problems of compatibilitu with latest versions of cm 12.1 . Be carefully

Alessandro's said:
Counter notification on cm 12.1 works? Like whatsapp with the number of notification is on the icon
Click to expand...
Click to collapse
I do not know the status bar but on the notifications panel shows how many you received Messages whatsapp and more

Thx for Your work

WiFI doesnt work, I tried with Wifi fix of renix and n1kolaa wlan-modules.zip but no solved.

Upload WiFi modules of the Cyanogenmod 18.5.2015, I believe that this will solve the problem.
Edit: WiFi doesn't work with Cm 12.1 18.5.2015 modules.
Edit 2: WiFi work.

Rebel_00XCV said:
Upload WiFi modules of the Cyanogenmod 18.5.2015, I believe that this will solve the problem.
Click to expand...
Click to collapse
Do you have link?

beksona said:
Do you have link?
Click to expand...
Click to collapse
cm-12.1-20150518

Rebel_00XCV said:
cm-12.1-20150518
Click to expand...
Click to collapse
Thanks bro!

I'm the only one that the WiFi and network don't work? Sfbe

beksona said:
WiFI doesnt work, I tried with Wifi fix of renix and n1kolaa wlan-modules.zip but no solved.
Click to expand...
Click to collapse
Thanks for your comment, i will extract the modules wifi of my ROM and create a fix STAY TUNED

lopezlioju said:
I'm the only one that the WiFi and network don't work? Sfbe
Click to expand...
Click to collapse
Thanks for your comment, i will extract the modules wifi of my ROM and create a fix STAY TUNED

this evening i upload the modules wifi

Related

ROM UPDATED May 19, 2015 [ROM] LP 5.1 Resurection-Remix Hardened Unofficial

Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19
screenshots
Screenshots added
Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy
Thanks for this ROM, are there any known bugs?
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...
optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...
Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers
his profile says Z3. lol
Any further reports on this ROM? Interesting to know how it performs and about stability
Deleted
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.
and where is the link to the update?
shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads
Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.
Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong
shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions

[ROM UPDATED NOV 11 [UB] DirtyUnicorns Lollipop 5.1.1 r29 Unofficial

If anyone has a problem with Dialer crashing, flash this and reboot: http://forum.xda-developers.com/attachment.php?attachmentid=3542888&d=1447583272
November 11: Rom updated. This is the same release 29 with the following changes:
1. Fixed notifications: now you have the correct icons in status bar
2. Network switches in Settings: mobile, wifi and bluetooth
3. Changes in WP8_supplicant: better wifi
You can flash dirty if you are on the previous release.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15160
--------------------------------------------------------------------------------------------------------
November 9: Rom updated to release 29
1. Latest Google sources including stagefright and audioflinger patches
2. Updated M5 kernel compiled with GCC 5.2.1 Ubertc - some say no one has done it before
3. Du has abandoned Lollipop (too bad for them), so, this is final unless there are further releases by Google
Kernel does NOT have recovery builtin. So, have TWRP in Fota/Recovery partition
Download: See download link for November 11 above
You may try to do dirty flashing if you were on a previous release, but full wipe is preferable
Oh, I want to give credit (the second time in this thread) for initial kernel sources to @Myself5
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
October 14. New update to LP 5.1.1 r24. This release includes:
1. Blacklist (call blocking). If you go to Security, you will see Blacklist heading where you can add numbers to block
2. Google October Security Patches.
3. Latest Sources (r.24)
This is probably the final Lollipop release, unless Google does r.25 et al. Virtually no one is doing anything with Lollipop: everyone is on Marshmallow... So, enjoy it while it lasts, as we are looking at the next summer the earliest when Marshmallow could become stable...
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14752
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
September 23. Rom updated to LP 5.1.1 r18, DU release 9.7. Latest sources.
Kernel includes the implementation of the latest Linux commit where persistent ram is replaced with Pstore. Also, the latest Sony 14.6 release with a revamped wifi module. The result: more ram available, better wifi and general stability... This kernel is only available on my Jaguar rom (originally) and this version of DU.
Do a fresh install and then you can restore your data (if you were on my prior release), otherwise, fresh install.
Remember, due to DU implementation of Selinux switch (which in my release is redundant (as Selinux is disabled in kernel), the system will take an extra minute (on first boot only) to have access to Settings. Android may complain that Settings app is not responding, choose wait and then allow root access to Settings, so that it could do its thing with Selinux switch. You only have to do it once...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=14515
____________________________________________________________________________________________________
August 22: Rom updated to LP 5.1.1 r13. Latest sources.
The main change: I have fixed brightness in TWRP 2.8.7. Due to horrendously wrong values, brightness could not be manually adjusted and also exceeded Sony's maximum settings over 18 times, which resulted in temperature rising to over 65 degrees during flashing. So, now the brightness lever works and you have about 52 degrees during backup/restore. I will be pushing commits upstream soon..
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=14132 Download link fixed. There were 4 downloads, please re-download and re- flash.....
You can flash dirty if you are on my previous release.
____________________________________________________________________________________________
August 14: Rom updated to LP 5.1.1 r10 and DU 9.6. Original DU is still release 9, but I used Google's r10 sources.
Latest AOSP/CM/DU sources. Latest M5 kernel with cpu/gpu overclock. TWRP 2.8.7 is in boot image.
You may flash dirty if you were on my previous release. If you use Xposed modules, you must flash Xposed for LP5.1.1 before rebooting.
Otherwise, clean flash. Keep in mind that due to DU changes LockClock app is part of DU Tweaks and if you remove it, you won't have access to Tweaks anymore. The good news is that DU's Lockclock does not have googleplay binaries...
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14022
__________________________________________________________________________________________
August 11: Kernel updated to include the latest CM and M5 commits. Kernel now is 2 mb lighter. Also, the fixed TWRP 2.8.7 is included in boot.img.
Download: http://forum.xda-developers.com/showpost.php?p=62282724&postcount=198
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
August 3: New build. Latest changes. On my end latest M5 kernel with the following additions:
1. CPU frequencies and voltage: 268/300/422/652/729/883/960/1036/1190/1267/1497/1574/1728/1958/2150/2265/2419/2457 and they all show up in voltage
2. GPU two new frequencies: 533/600
I flashed dirty, wiped cache/dalvik and had no problems, but clean flash with the subsequent data restore in TWRP is still preferable.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=13841
P.S. TWRP is in boot, so, get rid of your fota recovery first...
___________________________________________________________________________________________________
July 31: Kernel updated to reflect recent M5 changes. Also, GPU overclock to 600 is added thanks to Androguide.
Download: http://forum.xda-developers.com/showpost.php?p=62126634&postcount=145
____________________________________________________________________________________________________
July 30: New build. This is DU's release 9.5. Latest sources. See changelog in rom.
On my side: Wifi disconnection after 15 min of sleep and excessive draining are fixed. Now, the battery draining is very close to Kitkat
And generally wifi has more power now, as I have increased power cap to 80. All features listed below are also included
On first boot, Settings app is going to hang for about 1 minute due to the fact that SElinux switch is looking for Selinux which is expelled from the rom (as you know), so, just wait for Settings ask for root permission and grant it. If the system says app is not responding, choose wait, because you really want to give Settings that root permission, so that it wouldn't bother you anymore
If you are on a previous DU build, you may flash dirty, but fresh install (and then data restore in TWRP) is preferred.
TWRP is back in boot.img, so, if you have fota recovery, get rid of it in bootloader: fastboot erase recovery
Enjoy
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13759
_______________________________________________________________________________________
July 19: rom updated. This is 5.1.1 release 8. Latest changes
All hardened features
FM radio included
New M5 kernel with TWRP
Slim Launcher
Here is how to update without losing your data, provided you are upgrading from an earlier DU version:
1. Back up your current DU version
2. Factory Reset
3. Wipe System/Data/Cache
4. Flash the rom
5. Do Xposed Framework if you use it
6. Restore Data partition from your previous DU version
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13601
_____________________________________________________________________________________________________
July 14. This is an update in SystemUI.apk and Settings.apk. The first one may (or may not) fix the infamous screen freezing issue and incorporates this AOSPA commit: https://github.com/AOSPA-L/android_frameworks_base/commit/0542d859b7678b40c1e39f46a75cd9eb4af68103.
The second in Settings brings Hotspot idle support based on this: https://github.com/DirtyUnicorns/android_packages_apps_Settings/commit/ccabd57818de51196e7cb82eeae266e90029bb08
Just flash the attached dirty and reboot.
Download Link: forum.xda-developers.com/attachment.php?attachmentid=3404076&d=1436880734
________________________________________________________________________________________
New build is available. Latest changes including Selinux switch, Quick settings access to the respective setting.
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13497
_______________________________________________________________________________________
July 8, new kernel added
Download Link: http://forum.xda-developers.com/showpost.php?p=61766574&postcount=92
________________________________________________________________________________________
July 4, FM Radio added
Download: http://forum.xda-developers.com/showpost.php?p=61699414&postcount=88
Rom updated on June 27. This is LP 5.1.1 release 5. Latest DU and Google sources. All my hardened features included.
Additional changes (by me):
1. Network selection includes all options seen in phone test menu. Now, you can select many combinations of networks in Settings/More/Cellular Networks, as opposed to just 3g/2g/Lte, which means that your selection will stick, unlike when you make changes in test phone menu
2. SlimLauncher instead of Launcher3
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13325
______________________________________________________________________________________________________
New build is up. I think I was able to address most heat issues. There are also a few changes in DU sources in framework, telephony, vendor and DU tweaks. CPUs are running at about 32 degrees idle and about 42-47 under load. You should also see battery life improvement. There is absolutely no screen flickering (because of no overheating). This is experimental, as I have addressed some MP decision triggers, which in generic CM based kernels result in all 4 CPUs being online all the time. No wonder there was overheating.
I have also found that surprisingly the most lag free action is with Conservative governor. This is counter intuitive, but nonetheless true.. You try it and report
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13091
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Rom Updated on June 11. This is 5.1.1 release 4. Numerous changes, see DU update info in Settings:
Add USB Tether title
Various ThemeChooser fixes
Add Volume Rocker Swap button function
Add Wakelock Blocker
Add AOKP System /Listview Animations
Task Manager
Show 4G instead of LTE
Make headset notification dismissable
Allow all files over BT
Increasing ring volume
Unlink ringer and notification volumes
ADB over Network tile
Compass tile
PIN keypad shuffler
My own hardened features
Kernel with TWRP 2.8.0; overclocking, voltage, sound and kcal
Fixed Camcoder mike low recording level
Fixed Thermanager to address low charging and flickering
DOWNLOAD: http://forum.xda-developers.com/devdb/project/dl/?id=12979
___________________________________________________________________________________________________
Here is the latest Dirty Unicorns LP 5.1.1 unofficial compiled from sources on May 25. The lightest rom - only 252 mb in zip. All hardened features enabled including:
1. Removed nefarious IPs (Google, AT&T, Department of Defence and others from over 30 files in sources)
2. Hardened kernel features
3. 256 bit data encryption
4. Background WIFI scanning disabled
5. VOLTe (voice over LTE) provisioned
6. Restoring network selection is handled by system, as opposed to modem (the less control to modem, the better)
7. Latest CM and DU sources
Instructions:
1. Unlocked bootloader, root and recovery
2. Enter recovery, wipe /System/Cache/Data
3. Flash the rom and reboot
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12638
WARNINGS: I am not responsible for your device turning into a paper weight. You are on XDA, which means if anything goes wrong, blame yourself (and Putin)
Credit: DU Team; Slimroms for kernel and CM
XDA:DevDB Information
Dirty Unicorns Lollipop 5.1.1, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP; CyanogenMod
Version Information
Status: Testing
Created 2015-05-26
Last Updated 2015-10-13
New Kernel: Sound, Voltage, Color, Overclock
Here is a new kernel, which is based on CM12.1/M5
New Features:
1. All hardened features included
2. Overclocked to 2457
3. Voltage, Screen Color, Sound
4. TWRP 2.8.0 in boot image
5. Kernel compiled in DU5.1 build environment (with DU ram disk), as opposed to
generic build, which may cause issues because of different init files
Here is my voltage table, which is pretty stable:
300 mhz 730
422 mhz 740
652 mhz 760
729 mhz 770
883 mhz 790
960 mhz 805
1036 mhz 815
1190 mhz 835
1267 mhz 845
1497 mhz 855
1574 mhz 860
1728 mhz 870
1958 mhz 885
2265 mhz 955
2342 mhz 965
2457 mhz 980
Instructions: Unzip boot.img and flash in fastboot:
fastboot flash boot boot.img
fastboot reboot
Credit to MyselfM5 and to anyone who contributed to overclocking/sound/screen color
Source: https://github.com/HonamiZ1/android_kernel_sony_msm8974
soon i test this rom very thanks for the work
I have run this rom for about 24 hours and here are my impressions:
Most stable rom so far and I have tried them all. Also, good on battery. Flickering issue has been definitely fixed (by CM) and I have used their honami device with new values in thermanager. It was not easy to build, but doable, as opposed to Omnirom, which as of now, has no chance for our device. Thanks to DirtyUnicorns, they have a separate calf branch which is suitable for Z1. Don't try to use another kernel with this rom unless you copy modules too. This kernel has screen, sound settings, but no voltage, and I don't recommend tinkering with default values. I have also given up on TWRP 2.8.6, as it has major bugs resulting in overheating and failure to backup/restore. Use any version below.
The rom requires some tinkering: as such, Adaway defaults to disabled on reboot, because of DirtyUnicorn's internal adblock. If like myself, you like Adaway more, then disable adblock in Dirty Tweaks and also delete /system/etc/hosts.alt file. This way, Adaway will work fine.
A separate word on battery. It takes me 3-3.5 hours on OEM charger for a full charge from about 16%. If it takes you more or less, don't blame the rom/kernel, it is your battery dying. Forget about fast charging, it will do nothing good and for sure will destroy the battery. Heat just kills it like nothing else. If the charging is slow, the battery can't get the required voltage and the phone wouldn't report it fully charged. If it is too fast, that means that it attained the required voltage, but holding capacity has been severely reduced, which in turn means, the battery won't hold the load. Trust me, I have recently put a new battery (and new battery door) after using the phone for less than a year. Changing the battery was not a pleasant experience (the sticky they put on glass did not hold, so, I had to use glass glue,.) Why it was a battery? Because, while the phone would say battery heath is good, youtube wouldn't last for more than 20 minutes. Considering that the phone appeared in 2013, that's a miserable battery life, bit it was my fault: too much flashing and heat.
Screen freezes?
Any screen freezes on this ROM? Stayed away from AOSP cause my panel has issues with it. Would be nice to have a ROM which doesn't freeze
Wow, I've been waiting for this!
The only thing that's bothering me now is the lack of advance WiFi and Bluetooth option in the tiles (no arrow below WiFi and Bluetooth icon).
What things do or do not work? I honestly want to flash this so bad, but I'm afraid I might want to go back to my previous ROM when I find out my camera/shutter key doesn't work :/
I'm running a debloated version of the stock ROM, and I'm looking into this for an even lighter experience.
Thanks!
Quick question regarding C6902...would it be required to flash the modem separately like before on kitkat? Or has that been integrated into the rom?
Thanks.for understanding
kpbotbot said:
What things do or do not work? I honestly want to flash this so bad, but I'm afraid I might want to go back to my previous ROM when I find out my camera/shutter key doesn't work :/
I'm running a debloated version of the stock ROM, and I'm looking into this for an even lighter experience.
Thanks!
Click to expand...
Click to collapse
Camera shutter button will never work on AOSP. Just saying.
LOL. I just checked the camera hardware button and it works...
optimumpro said:
LOL. I just checked the camera hardware button and it works...
Click to expand...
Click to collapse
The launch from sleep?
AnrgKrshn said:
The launch from sleep?
Click to expand...
Click to collapse
Not the launch, but shutter...
optimumpro said:
Not the launch, but shutter...
Click to expand...
Click to collapse
I thought he meant the launch
Camera Mike Low Level Fix
This takes care of low level camera sound recording:
http://forum.xda-developers.com/xperia-z1/themes-apps/camera-low-recording-sound-permanent-fix-t3121958/post61044646#post61044646
Enjoy...
I had this bug in all 5.1 ROMs where the camera preview would work fine in low light but after pressing shutter, the photo would come out dark.
Is it still here in this ROM?
Hi, have some problems installing. When I install it seems to remove recovery and I think the efs as well since the network doesn't work at all. I've flashed it three times, each time losing recovery and having to flash the stock rom back. Thanka for your help
Reserved
bigmeech084 said:
Hi, have some problems installing. When I install it seems to remove recovery and I think the efs as well since the network doesn't work at all. I've flashed it three times, each time losing recovery and having to flash the stock rom back. Thanka for your help
Click to expand...
Click to collapse
Just do a search for Xperia Z1 recovery fota solution or fastboot any kernel with good recovery.
I don't know what efs is, but I have absolutely no network/wifi problems: works straight on boot. If you have C6902, you need to flash a file that is posted in general section.
Kernel with TWRP integrated
http://forum.xda-developers.com/showpost.php?p=60569243&postcount=136
Here is a 5.1 kernel with TWRP integrated.
Unzip it and flash in fastboot: fastboot flash boot boot.img
Remember, if you have TWRP in FOTA, don't flash this one, because you wouldn't be able to get to recovery at all.
optimumpro said:
Just do a search for Xperia Z1 recovery fota solution or fastboot any kernel with good recovery.
I don't know what efs is, but I have absolutely no network/wifi problems: works straight on boot. If you have C6902, you need to flash a file that is posted in general section.
Click to expand...
Click to collapse
Thank you. It's c6902, Could you direct me to the file Im meant to flash? Maybe efs is the wrong term, but no network and when I dial *#06# to check imei, it doesn't send a code back and doesn't seem to recognize a Sim, reflashed to stock and got network back

[ROM][GEEHRC] AOSP 6.0.1 + Omnirom 6.0.1, CyanogenMOD 13

This is first marshmallow build you guys have been waiting for a long long time (few days since source has been released )
Flashing instuctions:
Download TWRP.
Make full wipe
Unmount /system
Download and flash the ROM zip
Working:
WiFi
Bluetooth
RIL
Everything not listed in bugs
Bugs:
Selinux permissive as of now
Download: AOSP for GEEHRC
OMNIROM for GEEHRC
CM13 for GEEHRC
Kernel Sources: Kernel (Branch : master-exp)
AOSP device tree
CM13 device tree
OMNIROM 6.0.1 device tree
AOSP Manifest
Changelog:
Code:
Changelog:
Updated release (v2) (11.10.15):
Changelog:
-Fix NFC (bring back nxp stack which google removed and make relocations of api23+ apps warnings instead of fatal errors again)
-Add the GMS location provider name (important for apps uisng gps)
-GPS: Update blobs from nexus 7 2013 (flo) m release
-Build powerhal for msm8960 (fix touchboost)
Updated release (v3) (11.10.15):
Changelog:
build:
-do not build quicksearchbox (makes launcher look weird xD)
kernel:
-fix undervolt up to 750mhz down
-add kernel mode neon
-ALSA+ASOC patches for sound
-hide a warning in kernel/return_address.c while building kernel
Rom update (v4) 14.10.15
Changes:
-Fixed NFC the proper way by building NFc hardware lib from source without relocations therefore making bionic hack unneccessary (Abhinav2)
- Revert flo m gps blobs (I feel mako ones works better)
- Update rest of adreno blobs to flo m release
- Fix browser fc bug by downloading a file (storage perms granted, others stil untouched)
-Show optimizing apps on first boot
-Updates to device tree from flo (n7 13) m branch
-Kernel: introduce lower frequencies
- More I forgot
Update release 15.11.15:
Changelog:
ROM:
-Merge AOSP r1 -> r26
Kernel:
-Switching to bricked kernel
-Updates in WIFI code
-Decrase kmsg logging when battery is under 10%
Proprietary files:
-Add missing drm widevine libs for netflix google play movies
Special Thanks:
Abhinav2
Dmitry Grinberg: Mako port
XDA:DevDB Information
AOSP - 6.0, ROM for the LG Optimus G
Contributors
Kevinjoa, All OG developers
Source Code: https://github.com/marshmallow-og
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2015-12-29
Created 2015-10-09
Last Updated 2016-12-01
why on ROM information says: "5.1.x lollipop"? would you make some port for E970? Thanks in advance!
Nice. Very nice @kenvinjoa sir! Will try when its more stable.
Amazing you made what appears to be a pretty stable build and are optimising already. Thank you so much Kevinjoa, you are brilliant dev and generous person. The LGOG community would be lost without you.
working gapps https://www.androidfilehost.com/?fid=24052804347833783
@Kevinjoa you can add this in first post
great job Kevin and others. OG's got a new life now
This is for GEEHRC, can I flash it with CWM philtouch recovery? It says status 7. Anyone can help? My device is F180
Thanks
thangbomhl said:
This is for GEEHRC, can I flash it with CWM philtouch recovery? It says status 7. Anyone can help? My device is F180
Thanks
Click to expand...
Click to collapse
+1 for e970
OMGMatrix said:
+1 for e970
Click to expand...
Click to collapse
Its ok now after flashed TWRP. Thanks Kevin
Latest SuperSU Beta from chainfire also works for root access: https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
You can set undervolt with KernelAdiutor from playstore, for example.
thangbomhl said:
Its ok now after flashed TWRP. Thanks Kevin
Click to expand...
Click to collapse
Does this mean the ROM can be flashed on the E970 and it works?
Im not sure with e970. Why dont u try.
Sent from my AOSP on Geehrc using Tapatalk
RRO/Layers works as it should also just in case anyone was wondering
thangbomhl said:
Im not sure with e970. Why dont u try.
Sent from my AOSP on Geehrc using Tapatalk
Click to expand...
Click to collapse
I have installed it on my E970 and it's up and running. Will report any issues tomorrow.
@Kevinjoa seems browser fc while downloading is due to lack of storage permission. giving the permission to browser via App permission setting fixes the problem.
If you use jolla-TWRP or other recovery, you should fix update script to flash normally.
akahroba said:
@Kevinjoa seems browser fc while downloading is due to lack of storage permission. giving the permission to browser via App permission setting fixes the problem.
Click to expand...
Click to collapse
Hmm, I've seen this in logcat but for apps permissions only play services are shown to me.
edit: wrong place, need to look in apps and then browser and permissions, activating write external storage permisison fixes it.
Gesendet von meinem Optimus G mit Tapatalk
@Kevinjoa Can I upload your rom with fixed update-script?
And, I think you can delete abort parts from update-script for e975 recovery users.
Genie's said:
If you use jolla-TWRP or other recovery, you should fix update script to flash normally.
Click to expand...
Click to collapse
Yes hope i can flash it with philztouch because all my backup and stuff is there
Sent from my AOSP on Geehrc using Tapatalk
Update AOSP 6.0 rom
Updated release (v2) (11.10.15):
Changelog:
-Fix NFC (bring back nxp stack which google removed and make relocations of api23+ apps warnings instead of fatal errors again)
-Add the GMS location provider name (important for apps uisng gps)
-GPS: Update blobs from nexus 7 2013 (flo) m release
-Build powerhal for msm8960 (fix touchboost)
Download

[Z00L][KERNEL]Better Battery Backup v2

UPDATE: I really no longer have the time to update the custom kernels, I now work 16 hours days, 5-6 days weekly. With travelling time added, I barely have time to sleep.
Battery optimization is about choosing the right rom, tuning cpu governor interactive, disabling Google Play Services (use microG & tune GCM), forcing doze immediately, disabling ads, using black/white screen, app optimization (disable analytics, instant messaging), plus many other things.
Identify the rom, the base (aosp or lineage), can choose to use any of the kernels below if it is based on the same base. A backup of your original rom's kernel is in the rom.zip file, simply extract it and restore if encounter any problems.
I have created a guide here
(Please don't quote the original 1st post when replying, as everything is in progress, not written yet,
Please don't ask for ETAs, I'm only doing this in my limited spare time, thank you)
My kernels are NOT flash-and-forget, please READ through post #1, then CONFIGURE using Kernel Adiutor Mod (see post #2)
[Z00L][KERNEL]Enhancements For Increased Battery Backup v1 the original thread (now locked/closed)
DISCLAIMER
I bear no responsibility towards any malfunction of your device. Use my kernels at your own risk.
BACKUP YOUR PARTITIONS!!!
Before attempting to flash any kernel/rom, backup your critical partitions! It's meaningless to ask for help when disaster strikes. Follow the links below, root is required.
Partition Dump - Complete STEP 1
Partition Backup by wanam (save as both .img & tar.gz, plus the 1st 100MB - see 'spanner tool')
There's no need to backup the System or Data partition.
Credits & Thanks
abhishekr700 | source
Fabb2303 | source
LuK1337 | source
prakharluv | source
For Z00L & variants only, meaning these kernels are for Asus Zenfone 2 Laser models
- ZE550KL
- ZD550KL
- ZE600KL
Change Log (nothing new)
v05
added cpu hotplug: autosmp
v04
added USB Fast Charge, credits to @ENGstk
v03
removed CRC Check for 30% Performance Boost
v02
added SeLinux: Set to permissive
v01
added tcp-algorithm: westwood (default), bic, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
added memory: samepage merging, frontswap, cleancache
added filesystem: ntfs
added config: kernel config.gz can be found at /proc
removed hotplug: msm performance
removed cpu: touch boost
v00
same as stock boot.img from rom
DOWNLOAD
Unzip, copy to phone, then flash kernel via TWRP (select BOOT partition), re-flash SuperSU if you use it, reboot directly.
(Note: if you need to revert to original kernel, either use :
v00 of my kernel - its the same as your stock rom boot.img,
or extract boot.img from the rom)
If you use Magisk, refer to this thread 1st post - Installation Instructions, section "If you're not rooted, or something went wrong and you need a clean start"
Marshmallow
Lineage OS 13, latest is v05 for ROM lineage-13.0-20170226-UNOFFICIAL-Z00L.zip
Kernel Source
Nougat
AOSP-based Slim7 Nougat, latest is v05 for ROM Slim-Z00L-7.1.1.build.0.13-UNOFFICIAL-20170227-1643.zip
Kernel Source
Note: Rom's dev recommend Slim7 as the best battery backup ROM (AOSP-based) under his care
AOSP-based Tesla Nougat, latest is v05 for ROM Tesla-Z00L-7.1.1.Beta.v3.6-UNOFFICIAL-20170224-0757.zip
Kernel Source
LineageOS-based AOKP Nougat, latest is v05 for ROM aokp_Z00L_nougat_unofficial_2017-02-07_1615.zip
Kernel Source
Note: Rom's dev recommend AOKP as the best battery backup ROM (LineageOS-based) under his care
LineageOS-based OctOS Nougat, latest is v05 for ROM OCT-N-WEEKLY-20170224-2334-Z00L.zip
Kernel Source
LineageOS-based Resurrection Remix Nougat, latest is v05 for ROM RR-N-v5.8.2-20170218-Z00L-OFFICIAL.zip (note: this rom is not the latest one from RR-N, I didn't manage to download it coz it was released yesterday (Feb 28th), maybe next update. Could probably use this kernel on the latest rom, if nothing major was released, check the rom dev changelog)
Kernel Source
After flashing kernel, configure using Kernel Adiutor
if you can't wait, maybe try your hand in compiling a kernel, full workflow HERE
reserved 3
reserved 4
Finally
Finally pokipokipxorn is back with his awesome kernels
Nice work bro :good: We all are waiting your kernels
I suggest you to create a poll on this thread, as we are doing all our work for our beloved users and let them decide for which rom they want your battery saver kernel
prakharluv said:
Finally pokipokipxorn is back with his awesome kernels
Nice work bro :good: We all are waiting your kernels
I suggest you to create a poll on this thread, as we are doing all our work for our beloved users and let them decide for which rom they want your battery saver kernel
Click to expand...
Click to collapse
Agreed with @prakharluv, he's right @pokipokipxorn add a poll here that will be more handy for us
I'm getting problems trying to upload to Google Drive, if any of u experience file corruption after downloading the kernels, please post.
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Polls will be up much later, gotta collect rom list, ty for the suggestion.
pokipokipxorn said:
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Click to expand...
Click to collapse
Do we have to wipe cache or just reboot directly after flash kernel img?
HanszRN said:
Do we have to wipe cache or just reboot directly after flash kernel img?
Click to expand...
Click to collapse
Just reboot directly, but if you use SuperSU, you have to flash it again
Did you make a backup of your critical partitions? follow 1st post.
pokipokipxorn said:
I'm getting problems trying to upload to Google Drive, if any of u experience file corruption after downloading the kernels, please post.
Click to expand...
Click to collapse
pokipokipxorn said:
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Click to expand...
Click to collapse
Flashed OctOS kernel on latest OctOS weekly build and its working fine Nice work bro :good:
pokipokipxorn said:
Just reboot directly, but if you use SuperSU, you have to flash it again
Did you make a backup of your critical partitions? follow 1st post.
Click to expand...
Click to collapse
hai,brother
please u can compile this kernel for device ZE500KL aka Z00ED too?
thanks
Kernel are up for roms
- Tesla Nougat
- Resurrection Remix Nougat
Adhe_88 said:
hai,brother
please u can compile this kernel for device ZE500KL aka Z00ED too?
thanks
Click to expand...
Click to collapse
Which ROM? Note that I don't own the device, and I need you to post a screenshot of the kernel version or commits if any. (Phone Settings > About Phone > Kernel Version). I won't be able to flash or test the kernel.
pokipokipxorn said:
Which ROM? Note that I don't own the device, and I need you to post a screenshot of the kernel version or commits if any. (Phone Settings > About Phone > Kernel Version). I won't be able to flash or test the kernel.
Click to expand...
Click to collapse
maybe u can compile AICP rom and this source kernel my device https://github.com/Rygebin/android_kernel_asus_msm8916
thanks ?i appreciate it ?
Adhe_88 said:
maybe u can compile AICP rom and this source kernel my device https://github.com/Rygebin/android_kernel_asus_msm8916
thanks i appreciate it
Click to expand...
Click to collapse
So it's AICP 7.1.1 for Z00ED? Kernel source should be this one, note the commit gba1e18b from your screenshot.
I will try, it's 2am now, I got to go. cyall tomorrow.
pokipokipxorn said:
So it's AICP 7.1.1 for Z00ED? Kernel source should be this one, note the commit gba1e18b from your screenshot.
I will try, it's 2am now, I got to go. cyall tomorrow.
Click to expand...
Click to collapse
yeah ??
thanks brother ?
There is two files. Which one have to flash?.
prakharluv said:
Flashed OctOS kernel on latest OctOS weekly build and its working fine Nice work bro :good:
Click to expand...
Click to collapse

[ROM][P][9.0] AospExtended v6.5 for Amami [27.04.2019]

Download
AospExtended-v6.2-amami-20190114-1925-UNOFFICIAL
AospExtended-v6.3-amami-20190215-1418-UNOFFICIAL
AospExtended-v6.4-amami-20190324-1711-UNOFFICIAL
AospExtended-v6.5-amami-20190427-1006-UNOFFICIAL
TWRP 3.2.x-0
Magisk
GAPPS arm/9.0
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install Gapps
7. Install XREN-kernel (optional)
8. Install SuperSU or Magisk
9. Done![/SIZE]
Credits
SpiritCroc: big thanks to him for maintaining the device trees
115ek: thanks to him for local manifest
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
Local manifest - how to build...
XDA:DevDB Information
Aosp Extended for Amami, ROM for the Sony Xperia Z1 Compact
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-01-14
Created 2019-01-15
Last Updated 2019-04-27
14.01.2019
- initial release
15.02.2019
- Update from source
- Camera button to wake up
24.03.2019
Add Doze Pulse (Ambient Display, Hand wave, Pocket), thank's Roker2
Update thermanager
Switch to XREN Kernel
Linux kernel v3.4.113
High frequency CPU and GPU
USB fast charging mode
Added Governor's(zzmove, Elementalx)
Removed Governor Interactive
Dinamic ASYNC/FSYNC (memory optimization)
Intelliplug instead a MPDecision
I/O Sheduler "tripndroid"
Arch Power
Config TCP "westwood"
Adreno Idler
27.04.2019
- LED Notifications (Thank's NeoArian)
- Update from source
- Update thermanager.xml
- Minor fixes
Update AEX 6.3
15.02.2019
- Update from source
- Camera button to wake up
I'm using AEX on another device and it's pretty smooth - one of the best ROMs around, in my opinion. Unfortunately I cannot download from mega, it would be nice to allow for mirrors, thanx:good:
EDIT: Downloaded successfully via PC :good:
What's your problem with maintaining authorship?
Why can't you give proper credits? Only a very tiny part of this was done by you!
+ beautifull rom :good:
- not working equalizers
Jerri7 said:
+ beautifull rom :good:
- not working equalizers
Click to expand...
Click to collapse
Equalizer not working only in Stock Music Player
I've been running this ROM for approximately 24h and the overall impression was good. For some reason I had an increased battery drain (~10% over night with airplane mode). Could it be related to the camera button wake feature? I didn't find any option to turn it off, so I wasn't able to do before/after check.. I don't experience this drain on AICP Pie. (Maybe I'm the only one having that problem - in that case forget my post, since I didn't make any logs )
Edit: I used the stock (AICP) kernel
Hello everyone. Thank you for this software, I really like, despite some flaws. So yesterday, the battery charge remained 16%, turned the phone into flight mode, and in the morning the phone did not turn on. The battery is completely discharged. The radio doesn’t tune in auto frequency search; it only finds one frequency. For that, the camera works fine; the phone does not lag, as happened on the AISP; The phone works smoothly and quickly. I also liked setting the contact photo in full screen and recording the conversation on the phone. In general, if you modify it with autonomy, you can consider this software to be one of the best. (I tried all custom software)
problem solved. deleted
any screenshots?
_Pano_ said:
any screenshots?
Click to expand...
Click to collapse
Sent from my Xperia Z1 using XDA Labs
Hi. When I wait for the update, the best software on our device. Thank.
Hi there. Unfortunately the download link of version 6.3 seems to be broken. Can someone help?
justjoshy said:
Hi there. Unfortunately the download link of version 6.3 seems to be broken. Can someone help?
Click to expand...
Click to collapse
Today I'm share AEX 6.4
Changelog
Add Doze Pulse (Ambient Display, Hand wave, Pocket), thank's Roker2
Update thermanager
Switch to XREN Kernel
Linux kernel v3.4.113
High frequency CPU and GPU
USB fast charging mode
Added Governor's(zzmove, Elementalx)
Removed Governor Interactive
Dinamic ASYNC/FSYNC (memory optimization)
Intelliplug instead a MPDecision
I/O Sheduler "tripndroid"
Arch Power
Config TCP "westwood"
Adreno Idler
Changelog
Rom is really good. Thank you a lot!
Is there a trick for magisk or SU? Installed both (seperate installations) without having root or find any trace of them in the system.
The mentioned Magisk did not work for me. I installed magisk manager and let it download the zip and installed that. That worked.
27.04.2019
- LED Notifications (Thank's NeoArian)
- Update from source
- Update thermanager.xml
- Minor fixes
I have just installed this rom and it is working very well but one major problem. Screen is very bright. I turned off adaptive brightness but the manual brightness bar does not seem to work as it is the same from 0 to 100. I am not able to use it unfortunately as it is hurting my eyes

Categories

Resources