I just clean installed Fulmics ROM 5.1 and after that, I flashed 5.2 and 5.3 zip but camera app force closes. I did nothing fancy no mods nothing but it still force closes. I also cleared the cache and data of camera app but no luck. I'm using D852 the Canadian variant. Any idea why?
Edit: I have also attached logs from catlog
Edit 2: Tried Google Camera but that too force closes
Edit 3: Restored from stock backup and in stock rom camera is working fine
Edit 4: Replaced stock camera app and now camera opens but only in front facing. I couldn't switch to the primary camera.
Related
So I used to be able to use the front facing camera no problem for video chats. There used to also be a button to swap back and forth from front to back cameras. Now the button is gone and I'm stuck on the back camera. Any suggestions? Reflash the Talk app?
What ROM are you running?
evodeck...but it fixed itself. No idea what the problem was after searching all day on the forums today. I was just about to reflash some different modded versions too.
I installed an APK for Gtalk 1.3 video on my stock rooted EVO 4G (android 2.3.3 build 4.24.651.1) and it caused the stock camera app to close when switching to front facing camera. I have tried everything from clearing data for camera app, clearing dalvik cache and reflashing gtalk video apk, restoring stock gtalk with Titanium backup, Full factory reset (still rooted), and finally flashing stock RUU 4.53.651.1 and then running RUU 4.54.651.1 .exe. Even after full RUU reset with no apps installed the camera app still closes upon attempting to switch to FFC. Could it be that somehow Gtalk 1.3 video actually killed the camera hardware? Any suggestions would be appreciated.
I've noticed this on other roms as well that other than the stock rom, the camera closes imediately without any force close warning or anything. I just get a black screen and it suddenly closes. I think on X3 rom or something like that (ics, LB) it worked fine but on xzxperience and other LB ics roms, the camera app didn't work.
I wiped everything (cache,dalvic, data, system) and i also "unmount /system" when flashing the rom. There's no problem with any other app except camera app. I also tried clearing the data for the camera but still doesn't work.
Any idea?
Please, there has to be something that i'm not doing. It is just the camera app that's causing the problem as other apps from market are working (camera ics etc..).
I tried to flash the cybershot zip as well but still the same results.
So guys i installed the lg g3 camera mod v2 fixed from here
http://www.droidviews.com/jishnus-camera-mod-for-lg-g3/
But when i tried to open the front camera i got a black screen then a message "camera has stopped" and now i can't open the camera anymore!
Does anybody knows how to fix this?
Also I have the D855 with 16GB and V10i.
mohdd said:
So guys i installed the lg g3 camera mod v2 fixed from here
http://www.droidviews.com/jishnus-camera-mod-for-lg-g3/
But when i tried to open the front camera i got a black screen then a message "camera has stopped" and now i can't open the camera anymore!
Does anybody knows how to fix this?
Also I have the D855 with 16GB and V10i.
Click to expand...
Click to collapse
Try deleting camera cache, if that doesnt work, remove the mod you did and go back to stock - or reflash your backup you SHOULD have made
Have you changed the camera .apk? Check if the .odex file is removed from the folder aswell.
I have a known camera issue in which I cannot solve.
My camera does not work. Any app that tries to get to the camera fails.
I know that is not an hardware issue because on stock ROM the camera works.
Crash report:
java.lang.RuntimeException: startPreview failed
at android.hardware.Camera.startPreview(Native Method)
at com.android.camera.AndroidCameraManagerImpl$CameraHandler.handleMessage(AndroidCameraManagerImpl.java:261)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:136)
at android.os.HandlerThread.run(HandlerThread.java:61)
NOTES ַ& UPDATES
- I updated my firmware to NE4 so I cant install CM11
- I noticed that on CWM recovery its asks to ROOT my phone if I dont have one. This ROOT makes to phone to not detect the camera even on stock ROM.
- I used S3Rx_UCUFNE4_AROMA_11-9-14 to install the stock ROM. The camera wont work until I removed the KNOX app.
- I have tried to install ROM cm-10.2.1-d2att_for_NE4 and its the same problem
- Installing different kernels make my phone stuck on bootloop.
- The camera worked for one time only on CM10 after enabling " temp unroot" and than remove it in superuser app. But after this its not working.
Here is that things that I have tried:
- I checked to camera with no SD card so that gallery is empty.
- I updated my firmware from UCUFNE4 to UCUFNE4.
- I have installed different camera apps.
Threads that I have looked at:
http://forum.xda-developers.com/showthread.php?t=2542700
http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
https://play.google.com/store/apps/details?id=com.billgbennett.camerafix
I have tried this ROM and I have the same problem
http://forum.xda-developers.com/galaxy-s3-att/development/rom-dirty-unicorns-t2844362
IDEAS
I think that the problem is with the kernel or something with the ROOT.
Any room expect the stock one have broken camera.
I WILL GIVE BIG DONATION TO THE ONE WHO WILL SOLVE THIS ISSUE
There is a corrupt image or video file in your gallery that is preventing the camera from connecting. Look in your gallery for any recent files that just show a black square for their thumbnail and then delete them.
After that, clear data for your camera app and maybe even restart your phone just to be safe. It should work.
ScOULaris said:
There is a corrupt image or video file in your gallery that is preventing the camera from connecting. Look in your gallery for any recent files that just show a black square for their thumbnail and then delete them.
After that, clear data for your camera app and maybe even restart your phone just to be safe. It should work.
Click to expand...
Click to collapse
Thanks for trying to help but my gallery is empty and I still got this error.
Bump
I WILL GIVE BIG DONATION TO THE ONE WHO WILL SOLVE THIS ISSUE
Have you tried to revert all OS updates and flash original stock with odin and then root and install cm11 ?
Sent from my LG-D802
I tried various of the recommended fixes , nothing worked for me, but installing the nexus camera from the google play somehow fixed the problem and my camera works again
So, everyone's talking about the new google camera 4.3 apk working with oneplus 3. I have open beta 13, and everything works except when i click on the Slow Motion option the app force closes. Everyone is talking about slow motion with sound and I can't even get it to work without sound! I am running stock everything except im rooted with twrp. Please help me fix this.
https://forum.xda-developers.com/oneplus-3/how-to/op3-3t-unlock-720p-slowmotion-video-t3566276
Hey I followed the instructions: replaced the xml, wrote permissions to rw-r-r (0644) in TWRP, then booted and installed the apk. Still force closes app when I click on the "slow motion" option
scottwitha5 said:
Hey I followed the instructions: replaced the xml, wrote permissions to rw-r-r (0644) in TWRP, then booted and installed the apk. Still force closes app when I click on the "slow motion" option
Click to expand...
Click to collapse
Ask it on the app thread... ?
I'm a OP3T user and i have the same problem
With google camera slow-motion doesn't work
And with stock camera slow motion is zoomed a lot
I'm on latest stock 4.1.3 and not rooted
vip57 said:
I'm a OP3T user and i have the same problem
With google camera slow-motion doesn't work
And with stock camera slow motion is zoomed a lot
I'm on latest stock 4.1.3 and not rooted
Click to expand...
Click to collapse
Hey man! What I did was follow the thread about enabling 720p slomo with sound ( https://forum.xda-developers.com/oneplushttpsw-to/op3-3t-unlock-720p-slowmotion-video-t3566276 ), you must be rooted, and after replacing the xml I went into TWRP, mounted system, then went to the file in system>etc by clicking the xml, clicking chmod, then typing 0644, then rebooting! If that doesn't work, Add the line persist.camera.HAL3.enabled=1 to your build.prop too