Develop Bugs

[Q] Unable to Install Apps from Play Store Post ROM Installation.

Hello Team,
When i try to install any app (for eg: facebook) from play store after I installed the ParanoidAndroid 4.0-beta [12-31-13] from this link i get this message. "Insufficient Storage Available"
Few Inputs you might require to help me:
Recovery Software Used:
I used CWM v hercules-6.0.4.3 as recovery software.
ROM File Used:
http://forum.xda-developers.com/devdb/project/dl/?id=2793
GA APPS File used:
http://goo.im/devs/paranoidandroid/roms/gapps//pa_gapps-full-4.4-20131126-signed.zip
I followed the steps mentioned in below URL to install the kitkat update:
http://www.theandroidsoul.com/t-mob...te-now-available-paranoid-android-custom-rom/
When i go to Settings>Storage i see attached screenshot.

cnish_09 said:
Hello Team,
When i try to install any app (for eg: facebook) from play store after I installed the ParanoidAndroid 4.0-beta [12-31-13] from this link i get this message. "Insufficient Storage Available"
Few Inputs you might require to help me:
Recovery Software Used:
I used CWM v hercules-6.0.4.3 as recovery software.
ROM File Used:
http://forum.xda-developers.com/devdb/project/dl/?id=2793
GA APPS File used:
http://goo.im/devs/paranoidandroid/roms/gapps//pa_gapps-full-4.4-20131126-signed.zip
I followed the steps mentioned in below URL to install the kitkat update:
http://www.theandroidsoul.com/t-mob...te-now-available-paranoid-android-custom-rom/
When i go to Settings>Storage i see attached screenshot.
Click to expand...
Click to collapse
I don't understand why you flashed PA 4.0 beta, when you want 4.4? Also, the gapps file you used should only work with 4.4. I have no clue how it would have worked for PA 4.0?
And for future purposes, if it makes it any easier, try TWRP instead of CWM - it's a lot more user friendly. In terms of the insufficient storage, I'm having a feeling that you either haven't wiped your SD card before flashing, or something has gone wrong and the system is not detecting the SD card...

Real Big Problem

Hey Everyone,
I tried my hands on installing cyanogenmod 11 for xperia m. Did not take the backup of the current ROM, and did not transfer the package file to the SD card. However, the Fastboot and Unlocking BootLoader went fine.
Now the situation is, Current ROM erased, no backup, cant seem to install the cyanogenmod package either by "Sideload" or "Push and install".
While trying the SideLoad method, i get the error "E: can't open tmp/update.zip" .
Dont know where to start and how to revert back. Please can someone here help me?

This may be the solution.
hey brother,
Seems like you messed up with your phone and i think i have a solution for that.
Firstly as u have mentioned that your bootloader is unlocked .
Download Androxyde XPERIA Flashtool from here.
Then install it on your PC , later install Fastboot and Flashtool Drivers (the .exe file will be there in c:\flashtool\flashtool drivers,u need not download separately) , as u are using Sony Xperia M , Check Flashtool drivers , Fastboot Drivers and Drivers for Xperia P,S when prompted.
Then Connect your Phone in Fastboot Mode ( by holding Volume Down button ,check for ur phone ) and Flash the recovery.img / boot.img which will be in the Zip file of CM11. Download Gapps for your phone Then copy the zip file and the gapps.zip into your sdcard and put that sdcard into ur phone and boot via recovery(holding volume up button). Then Do the following
Wipe factory/data cache
wipe cache partition
wipe dalvik cache
go to install zip>install from sdcard1>select ur Cm11 file
In the same way Flash Gapps too
reboot and Enjoy
It worked for me and i am sure it will work for u too. if it didnt i am so sorry i cant help u.plz msg me if u have any doubts
all the best :laugh::good::angel:

166
Hey there....
Thanks for the reply. Appreciated!!
Sorry for being late, i kinda made it. I was only working with the Boot.img file and not the whole zip package. Copied the Zip to the SD and installed CM11.
Although i have one more question.
Internal is still 2.05, whereas Xperia M has 4gb of internal.
And also is there any way to swap internal with external in CM11. i have a 16gb SD Card.

Well Done
saggiboy231 said:
Hey there....
Thanks for the reply. Appreciated!!
Sorry for being late, i kinda made it. I was only working with the Boot.img file and not the whole zip package. Copied the Zip to the SD and installed CM11.
Although i have one more question.
Internal is still 2.05, whereas Xperia M has 4gb of internal.
And also is there any way to swap internal with external in CM11. i have a 16gb SD Card.
Click to expand...
Click to collapse
Hey there!!
i am glad u have made it and i heard we can make sdcard as default storage via adb commands but i didnt try it and i am not sure about any method related to it.
plz post here if u came across any
thanks

My Point Of View (operation cm9)

ASALAMOALIKUM Friends,
I really agree that ICS on Galaxy y gt s5360 is a blessing.
The question arises that why i download cm9 on my SGY? If Stock rom is working good and is stable
The answer is very simple.
#REASONS
1.You can download apps which are not compatible on stock rom. (but those apps which requires android version 4.0.4)
2.You can taste the sweetness of ice cream sandwich.
########################################################################
BUGS which i founded in this rom are,
1.Voice call serious issue sometime.
2.Music app so called apollo need minor fix(Cannot detect album image).
3.Lock screen become black while running music app(reason #2).
4.Wifi issue so called time out after flashing the Gapps. Without flashing Gapps wifi works normal.
5.Cannot download a single app from play store due to errors. Google u are responsible for it
6.Video recording.
7.Gallery disappear after flashing Gapps.
############################################################
BUGS fixed are,
1.Re-newed device tree from scratch.
2.Optimized libgralloc and libhwcomposer.
3.Fixed laggy bootanimation.
4.Completly removed artifacts on screen due to bad HW drivers.
5.Finally improved and fixed whole HW system.
6.Imporved Nexus S audio libs.
7.Fixed microphone.
8.New liblight lib open source - future support of BLN.
9.New camera library based on QCOM msm7x27 devices.
10.Camera preview working.
11.Camera pictures working too on native camera app.
12.Added all propietary necessary camera libs.
13.Panorama mode also working.
14.New binary for get_macaddrs and patched libbrcm_ril.so.
15.New WIFI configurations.
16.FIxed WIFI signal bars.
17.Fixed GPS, need more tests.
18.Stop using old Bluetooth system, and swithced to CM9.
19.Renewed and swithced to AOSP open offline charging.
20.Vold now built from source, and faster media scanning.
21.Fix battery capacity of some devices, and imrporved battery stats.
22.Init and adb binaried built from source.
23.Fixed whole adb system (adb shell, su).
24.Force adb to work on the first boot without debug options.
25.CWM6 built from ICS source and integrated on kernel build.
26.New kernel worked from 0 for all three devices.
27.New ramdisk full compatible with CM9 and built from source.
28.Common kernel is present on this build.
29.Switched to Alcatel libv3d kernel drivers.
30.Adapted cooperve camera drivers to common kernel.
31.New recovery.fstab partitiont table.
###########################################
Next: Operation CM11.
Allah Hafiz

woow
thnx for it can you share download link ?

Yes of course
CM 9 ROM : http://www.mediafire.com/download/4b87zagaw494x3h/CM9_totoro_Beta_05.zip
Kernel : http://www.mediafire.com/download/lzw3ddt9dtd9tw3/kernel_CM7_v4.0_totoro.zip
Gapps : http://www.devfiles.co/download/4DW4yYPf/gapps-ics-20120429-signed.zip
EXT formatting tool : http://www.4shared.com/zip/****of6jce/ext4_formatter.html?
CWM : http://www.4shared.com/zip/vWsAwiM8ba/CWM_Recovery_.html?

Installation Instructions:
Turn off your device and wait till it vibrates.
After it vibrates enter the recovery mode by pressing the three button combination (volume up+home+power button)
Using the volume up/down keys select apply update from sd card and select CWM Recovery.zip
Now go to mounts and storage mount all partitions except sd-ext (mount system, data, cache, sd card)
After you mount all partitions go to install zip from sd card and then select choose zip from sd card
Select ext_formatter.zip and wait till the installation completes.
Now go advanced and then select reboot recovery
Again select CWM Recovery.zip
Now install zip from sd card and then choose zip from sd card
Select kernel_CM7_v4.0_totoro.zip
Wait till the install completes and then go to advanced>reboot recovery
The device will automatically reboot in CWM Recovery
Now again to mounts and storage and format all partitions except sd card and sd-ext (format system, data and cache)
Again mount all partitions
Then press the back button and select wipe data/factory reset
After the factory reset is done go to install zip from sd card>choose zip from sd card> CM9_totoro_Beta_05.zip
Wait till the installation completes and then select reboot system now.
The first boot will take some time (approximately 3 minutes) but please be patient
You finally have Cyanogenmod 9.2 Android 4.0.4 Ice Cream Sandwich on your Galaxy Y GT-S5360.
Installation of Google Apps:
Boot the device in CWM Recovery
Mount all partitions in mounts and storage
Select install zip from sd card>choose zip from sd card> google apps.zip

AHA
Improvement Buddy.
Really appreciate you for your work.
I have also bought a new SGY time to do magic. lol

REALLY
Usman Zen said:
Improvement Buddy.
Really appreciate you for your work.
I have also bought a new SGY time to do magic. lol
Click to expand...
Click to collapse
I AM WAITING for your first rom

No chance for beta 6 update

Our rom lol
Khizar Ali said:
I AM WAITING for your first rom
Click to expand...
Click to collapse
LollipopSandwich rom is almost ready just gallery problem...........................................

man
gallery is not problem . man . beta 5 have big issues . u have fixed its . pls share with me pls i need +4.0 rom pls

tell me some other issues you are facing

look at this thread
denizarca said:
gallery is not problem . man . beta 5 have big issues . u have fixed its . pls share with me pls i need +4.0 rom pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2991826
may be this help u

i looked u have fixed everything i think lets share pls

Well here is my work hope you like it
http://forum.xda-developers.com/galaxy-y/development/android-lollipopcm9-based-rom-t2992238

MOD EDIT
We don't need another thread to discuss or Review CM9. There's [Q&A] [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [TOTORO][Beta 5 - 14/07/20
or the [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [TOTORO][Beta 5 - 14/07/2014]

[ROM][STOCK][Lolipop][deodexed,resigned,zipaligned] D5503 14.5.A.0.270 Enhanced LP

Hi, just to share with you!
Whats this? In short, it is deodexed -> resigned -> zipaligned, installed busybox, supersu, dual recovery (vol up for twrp, vol down for cwm), 5way reboot menu ...and some other changes which you can read about it here -> https://github.com/munjeni/D5503_14.5.A.0.242/commits/master .
How to download rom:
- go to here -> https://github.com/munjeni/D5503_14.5.A.0.242/tree/ae7b18de7faa97eaf01eff1c2b6abeb540feaf6f and on the right side you have "Download zip"
- after downloading rom is not ready, do not flash!!!
How to install:
- after you download rom you must repack zip since git always add things into new folder inside zip so you will need repack it first before installing!
- simple open main zip and go to folder "14.5.A.0.242.master", select all files from these folder, drag and drop it to a new empty zip, you are done. Before you flash rom please read "iportant" section! Flash these new zip with any recovery. Done.
Mirrored download link (using this you no need to repack anything, just download and install!):
- https://mega.co.nz/#!Co1yERia!eJVCBjTZrjXok3KXZxM9xp_28I9Pos-LPYKjigJ6Bok
Important:
- you must fully wipe /data partition (mean delete everything from /data folder)! Or another solution, flash only userdata from any LolyPop ftf! Why? Because all old files from internal storage is not relabeled and you will encounter a lot of problems and all these files can not be accessed from android, pictures, private files... etc is not accessible than! Don't think it will work without wipe, it will not! Wioe data factory reset have no sense, I recomend installing userdata from ftf since its more a safe way!
Changelog:
- https://github.com/munjeni/D5503_14.5.A.0.242/commits/master
Enjoy!

munjeni said:
Hi, just to share with you!
Whats this? In short, it is deodexed -> resigned -> zipaligned, installed busybox, supersu, dual recovery (vol up for twrp, vol down for cwm), ...and some other changes which you can read about it here -> https://github.com/munjeni/D5503_14.5.A.0.242/commits/master . Curently I am stoped development on this rom since I am unable to solve thing like this -> lolipop have two classpaths (BOOTCKLASSPATH and SYSTEMSERVERCLASSPATH) and I not understand how to access classes from one classpath to another classpath, if you have idea how I can get this than I will probably continue development. My plan was implementing privacy guard rom cm12 but since I have problem accessing classes I am temporary stoped
How to download rom:
- go to here -> https://github.com/munjeni/D5503_14.5.A.0.242 and on the right side you have "Download zip"
- after downloading rom is not ready, do not flash!!!
How to install:
- after you download rom you must repack zip since git always add things into new folder inside zip so you will need repack it first before installing!
- simple open main zip and go to folder "14.5.A.0.242.master", select all files from these folder, drag and drop it to a new empty zip, you are done. Flash these new zip with any recovery. I have made some automated scripts so you no need to wipe anything since everything needed will be done auto so just click "install" and wait until rom get installed.
Enjoy!
Click to expand...
Click to collapse
Flashed this ROM and it is amazing.
Debloated it, installed some mods like xposed, xposed fix, modded services.jar for superuser mode, modified mixer_paths.xml for more loudness and some apps like MyAndroidTools, TitaniumBackup, Greenify.
Works like a charm and good battery life.
Only thing is the aweful toogle change by Google (no silent, vibrate toggle on quick settings) - but this depends NOT on your ROM.
Thx munjeni (one more time) for your time, work and effort.
m.

Investigated and got solution for 5 way reboot menu
Where you got moded services with superuser mod? I wanted to start porting it from cm12 but if it is allready exist I will be glad to look into it

munjeni said:
Investigated and got solution for 5 way reboot menu, you can download from here (just download android.policy.jar and replace) -> https://github.com/munjeni/D5503_14.../system/framework/android.policy.jar?raw=true enjoy
Where you got moded services with superuser mod? I wanted to start porting it from cm12 but if it is allready exist I will be glad to look into it
Click to expand...
Click to collapse
http://forum.xda-developers.com/sony-xperia-z1-compact/themes-apps/mod-accent-systemui-t3088719

moonryder said:
http://forum.xda-developers.com/sony-xperia-z1-compact/themes-apps/mod-accent-systemui-t3088719
Click to expand...
Click to collapse
I have no idea why it is caled SuperUser Mod since it have nothing related to SuperUser. It is just SignatureDisable mod, author stupidly gave these name to these mod which apsolutly have nothing related to superuser If you look into commits on my git you will notice that you no need his services.jar since my rom allready have disabled signature verification, I not guarant you how his services is patched, but I can sugest you to replace services.jar whith one from my rom since compatibility is guaranted
This http://www.androidauthority.com/cyanogenmod-12-superuser-577985/ is what I call superuser mod (I have plan to port it here), and diferencie between "wrongly named" superusermod and real superusermod like one from cm12 is like this and this

munjeni said:
...and diferencie between "wrongly named" superusermod and real superusermod like one from cm12 is like this and this
Click to expand...
Click to collapse
LOL
Ok bro will wait for a "real" PrivacyGuard for LP 5.0.2, modded by the master munjeni itself

When trying to install an app from sd card, I am getting out of space message, can't install apps from sd card
btw.. already wiped everything, and system storage shows correct info

nemphis said:
When trying to install an app from sd card, I am getting out of space message, can't install apps from sd card
btw.. already wiped everything, and system storage shows correct info
Click to expand...
Click to collapse
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?

I can install apps from sdcard [emoji18]
But I am unable to download some apps from playstore

munjeni said:
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?
Click to expand...
Click to collapse
NO problems here, i can install apps from sd card am on stock rooted lollipop with unlocked boot-loader.
I'll wait for another simplified flashable version of your rom.

Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !

Freshly installed and everything is perfect ! Thank you very much brah !!
D5503 UB Dstriker ROM KK.157

Winb33 said:
Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !
Click to expand...
Click to collapse
i tried that and / or replaced some things like bootanimation, fonts etc.
Flashing failed, so flash it untouched and remove / add things then.

pathaniya said:
NO problems here, i can install apps from sd card am on stock rooted lollipop with unlocked boot-loader.
I'll wait for another simplified flashable version of your rom.
Click to expand...
Click to collapse
I'm trying to solve this but have no idea how to do it, it is selinux restriction (if somebody have idea how it can be solved let me know please), but temporary solution is: via terminal emulator disable selinux, than install app, than enable selinux. To disable selinux write "setenforce 0", than install app, than enable selinux "setenforce 1"

Winb33 said:
Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !
Click to expand...
Click to collapse
You can but only if you propertly remove lines from updater-script since it is hardcoded with our rom, instead recovery will abort installation if you missed something in updater-script ! My sugestion is, remove things manualy using an root file explorer, or at least add some lines in updater script which will remove things that you want

munjeni said:
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?
Click to expand...
Click to collapse
First when installed FR version same problems with SD card. Also ESexplorer had problems accessing SD card
Now on stock rooted works everything fine related to SD card.
Run also SDfix app becouse Titanium problem
Sent from my D5503 using XDA Free mobile app

EasySR said:
First when installed FR version same problems with SD card. Also ESexplorer had problems accessing SD card
Now on stock rooted works everything fine related to SD card.
Run also SDfix app becouse Titanium problem
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
No man, you no need sdcard fix. I allready included sdcard fix https://github.com/munjeni/D5503_14.5.A.0.242/commit/21b396daf721791c3675de417c543ba6184e21d1 and you can read / write any storage without problems, but we speak about problem related to the "installing apps from sdcard"! For example, if you try to install blablabla.apk which is on any storage you will get "no free space" error since selinux DENIED installing it, I don't have idea why it happen since I am not familiar with selinux, only very basic things by now. I will try to solve this problem!

munjeni said:
No man, you no need sdcard fix. I allready included sdcard fix https://github.com/munjeni/D5503_14.5.A.0.242/commit/21b396daf721791c3675de417c543ba6184e21d1 and you can read / write any storage without problems, but we speak about problem related to the "installing apps from sdcard"! For example, if you try to install blablabla.apk which is on any storage you will get "no free space" error since selinux DENIED installing it, I don't have idea why it happen since I am not familiar with selinux, only very basic things by now. I will try to solve this problem!
Click to expand...
Click to collapse
Just installed app on stock rooted lolipop (3G Watchdog) from SD card
Sent from my GT-P5110 using XDA Free mobile app

Hey guys, I'm having a hard time installing xposed installer, I get "not enough space" error. Could any of you help out a fellow user..?
D5503 UB Dstriker ROM KK.157

EasySR said:
Just installed app on stock rooted lolipop (3G Watchdog) from SD card
Sent from my GT-P5110 using XDA Free mobile app
Click to expand...
Click to collapse
Ok thanks for info. On my rom selinux must be disabled temporary before installing any app from sdcard, than enabled. I will try to understand why it happening. For sure it is related to selinux. I replaced platform key in selinux_policy.xml since all apks on our rom is resigned and zipaligned but it was not solved problem related to the installing apks from sdcard.

[PATCHER][APP][OFFICIAL] Dualboot/Multiboot For Nokia X/XL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am proud to present the first dual boot project for the Nokia X/XL/X+ (normandy) .This will allow any number of ROMs to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/multiboot, /cache/multiboot, and /data/multiboot). Because of the way this is implemented, no changes to the primary ROM are necessary
What is DualBootPatcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 198 supported devices and their variations.
Information:
I have managed to support for Nokia X/XL/X+ to the DualBootPatcher App, I am not the creator, just the supporter.
It's awesome and useful for testing out roms or if you want, switching ROMS.
Disclaimer:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Requirements:
1. A Custom Recovery (Tested using TWRP 3.1)
2. A ROM
3. Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
What does the app do ?:
It patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
What's supported ?
Except Toaster and Alarm clocks pretty much everything is supported.
Click to expand...
Click to collapse
How to use the App?
Before you start using the app, take note of these:
1- You must have re-partitioned storage (1gb system + 2gb data), we are taking about Dualboot on 4gb emmc
2- Before you start, it's important to change ro.product.device value to "normandy" without quotes in your build.prop, if you don't do this, you can't use the app.
3- You must be on KK ROM or higher to use this app (primary ROM), but you can use any ROM (JB/KK/LP/MM) as secondary ROM.
Now, you can use the app:
1- Download, install and open the app.
2- Swipe to the right to open the menu. Click "ROMS". Now if this is the first time you use it, it will ask you if you want to set kernel. Do so!
3- After it has finished go to ROM Settings (primary ROM 3 dot menu) and select Update Ramdisk. It will update it and will ask you to reboot. Press Reboot Now.
4- Now Download any ROM you like and open the app again and open the menu and open Patch Zip File from the menu. Ensure that your Device is set to "normandy" and under Partition configuration select secondary (will install 2nd ROM in /system) or data slot.
- I did't test booting from ext-sd card, so if you will do it I'M NOT RESPONSIBLE of any possible BRICKS!
5- Click continue and select where to save the patched file.
6- You should see the file is being put in "Queue". Just click the confirm button to the upper right.
Note: If you want to go back, just swipe the ROM in queue to right and start over.
7- The app will patch the zip. When done, go back to "ROMs".
8- Click "Flash zip files" (the big pink button on the lower right). Click the pink plus button to add your previously patched zip file.
9- Locate the file you have patched in step 7. Unless you have changed the name there, it should be something like ROM_name_partition_config_ID.zip (like AOSPA_4.4.4_NOKIA_XL_UNOFFICIAL_BY_YSH_dual).
10-Click on that file and choose "Keep location". Now confirm the flash with the button on the upper right side.
Note: You can also install the patched zip files in recovery.
11- It will now open the terminal and begin flashing the file. This requires some patience. After it has flashed the file you'll see success message in green.
11- Now click back and you should see your newly installed ROM along with the Primary ROM.
Note: You can find more options by clicking on the three buttons on each ROM.
12- Now reboot and wait till finishing 2nd ROM first boot. if ROM was 4.4+ install DualBootPatcher apk so you can easily switch ROMs, if not there is another way to change ROMs: flash DualBootUtilities.zip and switch ROM manually.
13- return back to your primary ROM, open app then select settings and press install (update) bootui. then Swipe to the right to open the menu. Click "ROMS" again and open secondary ROM Settings) and select Update Ramdisk.
14- Now you can change ROMs simply using boot ui (some thing like grub bootloader but it works like twrp)
Partitions Configurations:
The patcher offers several locations for installing ROMs -but i recommend only /system and /data-:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage. (The best choice for normandy)
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition. Our normandy's cache partition is about 100MB which is not enough to install a ROM on.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
How to boot to another ROM ?
This is simple ... There is no reboot to primary, secondary or whatever. So all you have to do is:
1) Go to ROMs section of the App.
2) Click on the ROM you want to boot to. You should see "Switching ROM" message. After few seconds, you should see a report message saying that "ROM successfully switched".
3) Now just do a normal reboot of your device. See the magic! It should boot to the ROM you have switched on step 2.
Note: You can find more options by selecting the three buttons on each ROMs (like creating reboot widgets for directly rebooting to specific rom).
You also need to install the App to all of the ROMs you install. Otherwise, you want be able to boot to other ROMs!
Apps and Data sharing:
DualBootPatcher very recently got support for sharing apps and their data across ROMs. Maybe sharing is somewhat of a misleading term. The feature actually makes Android load the shared apps and data from a centralized location, /data/multiboot/_appsharing. So you're not sharing apps from one ROM to another per se. The ROMs are just loading the apps from one shared location. Let me make this clearer with an analogy.
Think of the people in a company office as ROMs. You want to share with your coworkers some documents (apps). Instead of telling them to come over to your desk to see those documents (sharing apps from one ROM to another), everyone goes to the conference room to look at the documents together (loading apps from a shared location). That's how app and data sharing is implemented.
Click to expand...
Click to collapse
To use app sharing, follow these steps in every ROM that you want to use app sharing: (doesn't work with JB ROMs)
Install the app you want to share
Open DualBootPatcher and go to "App Sharing" in the navigation drawer
Enable individual app sharing
Tap "Manage shared applications" and enable APK/data sharing for the app
Reboot
When you uninstall an app that's shared, it simply become unshared for the current ROM. That way, other ROMs are not affected. To continue the analogy above, if you quit your job, you won't shred the documents that everybody else was looking at.
If you unshare an app's data, it will go back to using the data it had before it was shared. In other words, you leave the conference room and go back to work on your own documents at your desk.
Click to expand...
Click to collapse
Other How to ?
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
All Downloads Here​Cheers ! we are officially supported ​
Note: You can download any version since "9.2.0.r86.gfc253e2"
Screenshots:
In screenshots tab
Click to expand...
Click to collapse
Sources:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
DualBootUtilities: https://github.com/chenxiaolong/DualBootZips
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
Known issues:
- Can't use any LP ROM as primary on XL.
- Data sharing won't work if you are using JB ROM.
Credits:
 @chenxiaolong for the awesome DualBootPatcher.
 @androidlover5842 for helping me always
 @veez21 for testing on Nokia X and Bootui screens
XDA:DevDB Information
[PATCHER][APP][OFFICIAL] Dualboot/Multiboot For Nokia X/XL, Tool/Utility for the Nokia X
Contributors
yshalsager, androidlover5842, chenxiaolong
Source Code: https://github.com/chenxiaolong/DualBootPatcher
Version Information
Status: Snapshot
Current Beta Version: 9.2.0.r86.gfc253e2
Beta Release Date: 2017-04-30
Created 2017-05-02
Last Updated 2017-05-02

Reserved

Created 2017-05-02
Last Updated 2017-05-02[/QUOTE]
hello dualboot?
hey, i literally have no space in data and system partitions...so if i install rom on ext sd and do app sharing on data
does that mean i will have a secondary rom with the same data?

If i want to use JB ROM as secondery rom, I needed a zip file. Right?
---------- Post added at 04:23 AM ---------- Previous post was at 04:21 AM ----------
ani00 said:
Created 2017-05-02
Last Updated 2017-05-02
hello dualboot?
hey, i literally have no space in data and system partitions...so if i install rom on ext sd and do app sharing on data
does that mean i will have a secondary rom with the same data?
Click to expand...
Click to collapse
I have nearly same question. I want to know if I install a app in primery one and data sharing on and does the app will show on secondery one or just data of it will be share between roms? If we have to install same app in both of roms then we will have very limited space for installing.

ani00 said:
hello dualboot
hey, i literally have no space in data and system partitions...so if i install rom on ext sd and do app sharing on data
does that mean i will have a secondary rom with the same data?
Click to expand...
Click to collapse
I think you didn't read this :
The feature actually makes Android load the shared apps and data from a centralized location, /data/multiboot/_appsharing. So you're not sharing apps from one ROM to another per se. The ROMs are just loading the apps from one shared location
Click to expand...
Click to collapse
abhijit1998 said:
If i want to use JB ROM as secondery rom, I needed a zip file. Right?
Yes, or you can simply switch using boot ui like screenshots
---------- Post added at 04:23 AM ---------- Previous post was at 04:21 AM ----------
I have nearly same question. I want to know if I install a app in primery one and data sharing on and does the app will show on secondery one or just data of it will be share between roms? If we have to install same app in both of roms then we will have very limited space for installing.
Click to expand...
Click to collapse
Just data sharing - storing in same location -

how can i flash rom patch zip in secondary or primary rom?

ani00 said:
how can i flash rom patch zip in secondary or primary rom?
Click to expand...
Click to collapse
Please read the guide carefully. I've answered all possible questions
To install zip to primary
Patch zip file to primary. Flash it using recovery or inapp flasher through second rom.
To install zip to secondary
Patch zip file and flash using app

Awesome!!

We are on XDA news!
I was checking xda as I always do and I surprised for seeing our project on homepage. Thanks XDA ?

Awesome. Just awesome. I dont own this device now. But i remember. I flashed this device twice. CM and stock Nokia OS. Nice phone but lack of ram.

I tried to use as you told in description. First I was using Nexus X ROM as primary. When I update ram disk and pressed reboot. But while starting phone vibrates five time in a raw. Then stuck at Nokia logo. Did not started. Later I tried one more without updating ram disk and installed stock Nokia ROM. I booted to stock ROM. Later I tried to go back to primary one by the zip file. but when trying it shows some error like. But I rebooted and it booted to stock JB ROM. Don't know why this happened.
Secondly I installed nameless ROM. I tried all procedure and updated ram disk too. For this ROM my phone booted. But I saw some thing which I did not expected. The ROM is not showing SD card. No storage details in settings menu. I rebooted and saw same thing. Tried to unmount but nothing happens. But SD card is working fine.
I go back to Nexus X ROM by flashing it by TWRP recovery. I used TWRP 3.0.0-0.
I tried all Installation of ROM by the app in build flasher.
Anyway, Good thing that it is not hard. I will try another ROM for my device. Don't know what ROM veez21 used. But thanks. Tell me if you fount anything about this.

abhijit1998 said:
I tried to use as you told in description. First I was using Nexus X ROM as primary. When I update ram disk and pressed reboot. But while starting phone vibrates five time in a raw. Then stuck at Nokia logo. Did not started. Later I tried one more without updating ram disk and installed stock Nokia ROM. I booted to stock ROM. Later I tried to go back to primary one by the zip file. but when trying it shows some error like. But I rebooted and it booted to stock JB ROM. Don't know why this happened.
Secondly I installed nameless ROM. I tried all procedure and updated ram disk too. For this ROM my phone booted. But I saw some thing which I did not expected. The ROM is not showing SD card. No storage details in settings menu. I rebooted and saw same thing. Tried to unmount but nothing happens. But SD card is working fine.
I go back to Nexus X ROM by flashing it by TWRP recovery. I used TWRP 3.0.0-0.
I tried all Installation of ROM by the app in build flasher.
Anyway, Good thing that it is not hard. I will try another ROM for my device. Don't know what ROM veez21 used. But thanks. Tell me if you fount anything about this.
Click to expand...
Click to collapse
I don't know what kernel Nexus ROM is using. Try changing it.
Without updating ramdisk you won't be able to change roms.
In KK ROMS after updating ramdisk internal storage is disabled not sdcard.
Veez21 tested it using Cm13

yshalsager said:
I don't know what kernel Nexus ROM is using. Try changing it.
Without updating ramdisk you won't be able to change roms.
In KK ROMS after updating ramdisk internal storage is disabled not sdcard.
Veez21 tested it using Cm13
Click to expand...
Click to collapse
Null kernel is used in Nexus X rom.
Do you know how to make a flashable rom which is installed in our device? I want to make stock rom zip file which is latest. Then I will use duallboot. I wanna keep stock rom as secondery as I play some games. Stock rom's flashable zip file is availabe but they are older versions.
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
yshalsager said:
I don't know what kernel Nexus ROM is using. Try changing it.
Without updating ramdisk you won't be able to change roms.
In KK ROMS after updating ramdisk internal storage is disabled not sdcard.
Veez21 tested it using Cm13
Click to expand...
Click to collapse
you told internal storage is disabled after ram disk update.?? Before starting any dualboot thing I used the swap sd card option in setting which made ext sd card as internal. So that why I was not able to see sd card in my device.??

abhijit1998 said:
Null kernel is used in Nexus X rom.
Do you know how to make a flashable rom which is installed in our device? I want to make stock rom zip file which is latest. Then I will use duallboot. I wanna keep stock rom as secondery as I play some games. Stock rom's flashable zip file is availabe but they are older versions.
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
you told internal storage is disabled after ram disk update. Before starting any dualboot thing I used the swap sd card option in setting which made ext sd card as internal. So that why I was not able to see sd card in my device.
Click to expand...
Click to collapse
Latest stock rom 1.2.4.2 flashable zip https://forum.xda-developers.com/showthread.php?t=2745614

yshalsager said:
Latest stock rom 1.2.4.2 flashable zip https://forum.xda-developers.com/showthread.php?t=2745614
Click to expand...
Click to collapse
I think 1.2.4.2 is not latest. Latest is 1.2.4.3.... and mine is 1.2.4.3.... I can not remember is there a way to flash img file with pached? I have stock image file...

Found
well found a new trick to make zip file of the stock ROM which is installed into our device.
link- https://forum.xda-developers.com/showthread.php?t=2746044
Now have to make zip file with the ROM. It will be not that hard for me.

abhijit1998 said:
well found a new trick to make zip file of the stock ROM which is installed into our device.
link- https://forum.xda-developers.com/showthread.php?t=2746044
Now have to make zip file with the ROM. It will be not that hard for me.
Click to expand...
Click to collapse
Well, you can also use the META-INF from stock deodexed rom to avoid errors with symlinking

yshalsager said:
Well, you can also use the META-INF from stock deodexed rom to avoid errors with symlinking
Click to expand...
Click to collapse
Well I already thought that. I already made one with the help of a old stock ROM and replaced stock kernel with null kernel. Just have to transfer the rom into my phone from pc.

Successfully done. AOSPA ROM as primary and B-ROM as secondary. Both installed in system partition. One problem found. WiFi hotspot is not working in secondary ROM. When no dual boot used, everything works perfectly. But after dual boot, WiFi hotspot is not working in B-ROM. Tried to restore partitions, but no success. WiFi hotspot is Woking perfectly in AOSPA ROM, not in B-ROM.
One more thing. Some time after using boot ui no boot animation of ROMs came up, but ROM still starting. Don't know why.

abhijit1998 said:
Successfully done. AOSPA ROM as primary and B-ROM as secondary. Both installed in system partition. One problem found. WiFi hotspot is not working in secondary ROM. When no dual boot used, everything works perfectly. But after dual boot, WiFi hotspot is not working in B-ROM. Tried to restore partitions, but no success. WiFi hotspot is Woking perfectly in AOSPA ROM, not in B-ROM.
One more thing. Some time after using boot ui no boot animation of ROMs came up, but ROM still starting. Don't know why.
Click to expand...
Click to collapse
Any fix?