Related
Forgot the pattern or password of your ANDROID device ??
Need to unlock the device without formatting the data ?? Here's the way
Download the attatched file which can be found at the end of this post
Let , e explain this in 4 simple steps.
STEP 1: Download the attatched File Manager
Thanks to XDA RECOGNISED MEMBER AMARULLZ
Click to expand...
Click to collapse
STEP 2: Enter recovery mode and mount /system,/cache and all others
STEP 3: Install Aroma file manager andsoon after installation you will see the app
Enter menu, which is at the left corner of the screen and check "MOUNT ALL PARTITIONS IN STARTUP". Now exit Aroma file manager from the menu itself.
Here goes the final step
STEP 4: Install the same file once again and now go to DATA / SYSTEM and search for
GESTURE.KEY if u want to remove Pattern or Password. Key if u want to remkve password
Click to expand...
Click to collapse
Exit recovery mode and reboot your device
If it asks for pattern or password enter any pattern or password.
Whoala !!!!!!! You have unlocked the pattern without clearing out your valuable data.
If it works never forget to thank AMARULLZ
♡♥⊙○■GÏRîDHÅR■○⊙♥♡
Giridharbavana said:
Forgot the pattern or password of your ANDROID device ??
Need to unlock the device without formatting the data ?? Here's the way
Download the attatched file which can be found at the end of this post
Let , e explain this in 4 simple steps.
STEP 1: Download the attatched File Manager
STEP 2: Enter recovery mode and mount /system,/cache and all others
STEP 3: Install Aroma file manager andsoon after installation you will see the app
Enter menu, which is at the left corner of the screen and check "MOUNT ALL PARTITIONS IN STARTUP". Now exit Aroma file manager from the menu itself.
Here goes the final step
STEP 4: Install the same file once again and now go to DATA / SYSTEM and search for
Exit recovery mode and reboot your device
If it asks for pattern or password enter any pattern or password.
Whoala !!!!!!! You have unlocked the pattern without clearing out your valuable data.
If it works never forget to thank AMARULLZ
♡♥⊙○
Click to expand...
Click to collapse
kickkiran said:
Giridharbavana said:
Forgot the pattern or password of your ANDROID device ??
Need to unlock the device without formatting the data ?? Here's the way
Download the attatched file which can be found at the end of this post
Let , e explain this in 4 simple steps.
STEP 1: Download the attatched File Manager
STEP 2: Enter recovery mode and mount /system,/cache and all others
STEP 3: Install Aroma file manager andsoon after installation you will see the app
Enter menu, which is at the left corner of the screen and check "MOUNT ALL PARTITIONS IN STARTUP". Now exit Aroma file manager from the menu itself.
Here goes the final step
STEP 4: Install the same file once again and now go to DATA / SYSTEM and search for
Exit recovery mode and reboot your device
If it asks for pattern or password enter any pattern or password.
Whoala !!!!!!! You have unlocked the pattern without clearing out your valuable data.
If it works never forget to thank AMARULLZ
♡♥⊙○
Click to expand...
Click to collapse
Yeah unlocked. Just deleted lock settings.db file also. Thanks. :fingers-crossed:
Sent from my Lenovo A6000/Plus using XDA Labs
Click to expand...
Click to collapse
First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!
If anything Goes wrong...How to revert Back ?
Sent From My Redmi
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
can we use rom??and can i install custom kernel for both roms??
as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa
how can i restore my data on my first rom? help me plz
chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!
sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!
very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Great, Thanks for info, will try after my exams, one again Thank You Very Much.
@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...
as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!
bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!
internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately
Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ
I'm not the Author, the author is wzsx150 from LR.TEAM
WZSX’s TWRP is well-known as the Chinese version of TWRP due to the language default is in Chinese. However, you can switch to English within TWRP user settings it's easily. switched. You can follow the instructions on this link to change the language to English: https://miui.blog/any-devices/lr-tea...inese-english/
Xiaomi 8's LR.Team customized version of Twrp
Automatically decrypts data, Includes root functionality, clear the power-on password, multi-function restart.
Disclaimer: I have installed it and for me it works fine. However, it is not guaranteed to work for you especially if you currently have encryption. Use at your own risk
If you need help flashing TWRP : Follow instructions here: https://miui.blog/mi-8/flash-twrp-root-mi-8/
Downloads
Latest
Version for Miui 11 Android 10/Q : https://www.androidfilehost.com/?fid...26312261636230
MD5: 2f5f2e7dc8f32b5a999828c9370b7de2
Version for Miui 10 or 11 Android 9/P : https://www.androidfilehost.com/?fid...26312261636232
MD5: 4681f9bd6367f934218da71fd528e39b
Old Versions
TWRP-3.2.3.1-FireDance-Edition (English) ( img)
TWRP 3.2.3-1208 (English) ( zip - img )
TWRP 3.2.3-1110 (English) ( zip - img )
TWRP 3.2.3-1110 ( zip - fastboot - img )
TWRP 3.2.3-0918 (zip - fastboot - img)
TWRP 3.2.3-0908 (zip - fastboot - img)
TWRP 3.2.2-0703 (zip - fastboot - img)
TWRP 3.2.2-0611 (zip - fastboot - img)
TWRP 3.2.2-0609 (zip - fastboot - img)
Changelog (Google Translated)
2018.11.10 update Contents:
1. Update the new rom that supports the official Android 9.
2. Update and optimize some functions
3. Increase the option to restart after the automatic upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box and you can not restart. After the automatic upgrade, some operations are performed to prevent twrp from being overwritten, etc.
4. Update the built-in root to magisk 17.1, and fix the problem that the module cannot be brushed. Other features are also updated and optimized
5. After the new version of the system root, restarting the system requires manual installation of the magisk app, the official system problem, this can only be so
. 6. If Kami may need the root system or remove the dm check operation.
7. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc.
2018.9.8 update:
1. Support the official Android 9.0 system, including automatic decryption data
2. About data decryption, this may not be particularly stable now, sometimes need to reboot into the system and then restart Twrp can be decrypted.
If the new version of twrp is not supported, you can try to use the old version of
2018.8.6 update:
1. Update twrp 3.2.3 source code
2. Built-in magisk16.7, temporarily build this version first
3. Optimize data decryption problem, fix some problems
4 Support the new version of miui10 data decryption
5. Decrypt the plaintext display input password, easy to check whether the password input is correct
6. Update to try to repair the decryption data scheme, set the lock screen password to the machine, enter twrp need to enter the lock screen Password, otherwise you cannot temporarily decrypt data.
7. After brushing in twrp, the first time you enter twrp may restart once. This is normal. If you restart repeatedly, or you can't decrypt data, please give me feedback on Weibo.
8. Regarding data decryption, this may not be particularly stable now. Sometimes you need to reboot into the system and restart into twrp to decrypt.
If the new version of twrp is not supported, you can try to use the old version of
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
arifqur said:
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
Click to expand...
Click to collapse
@gulp79 is to thank for the English version
mikefallen said:
@gulp79 is to thank for the English version
Click to expand...
Click to collapse
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/fm/M4oDgLxA
Click to expand...
Click to collapse
that link doesn't seem to work for me, just redirects to the home page of mega
mikefallen said:
that link doesn't seem to work for me, just redirects to the home page of mega
Click to expand...
Click to collapse
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
Click to expand...
Click to collapse
yup added to OP Thanks!
Help!!!
It works for mi 8 miui 10.0.3.0 global?, i cant figure out how install the eu rom, in the twrp show me only folders encrypted :C, somebody knows how ?
Looks like you will have to format Dara partition in recovery by typing yes
So, boot the img and then flash the zip for TWRP to stick permanently?
Can't use gapps Aroma installer using twrp .. any ideas ?
could this twrp support amora installer
could this twrp support amora installer?
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
in twrp go to file manager, data, system and delete locksettings file. reboot and you're good to go again
Hi!
Help me, please!
I can't exit from recovery mode on MI8
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
Go into recovery mode, format internal memory.
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
Coolesha said:
Hi!
Help me, please!
I can't exit from recovery mode on MI8
Click to expand...
Click to collapse
You need to format your device.
bahuy2003 said:
Go into recovery mode, format internal memory.
Click to expand...
Click to collapse
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
cyaneo said:
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
Click to expand...
Click to collapse
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
bahuy2003 said:
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
Click to expand...
Click to collapse
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
cyaneo said:
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
Click to expand...
Click to collapse
Flash this zip in TWRP and your login password would be deleted, which by the way gets jumbled up after a restore.
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
All your data will be lost
Read all the steps correctly
* I am not responsible for bricked devices, dead SD cards,or lost your phone
*You will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help.
*Software updates won't work once you root device.
You will need:-
1. Your phone stock frimware:-
https://www.sammobile.com/firmwares/
2. Pc
3. Your phone with unlocked bootloader
4. Odin software:- https://samsungodin.com/download/Odin3_v3.13.1.zip
5. Samsung usb drivers:- https://samsungusbdrivers.me/
6. Internet
7. Some time
Download stock frimware
Download your device stock frimware and extract AP from your stock frimware and place it in your phone.
You can get your stock frimware from here:- https://www.sammobile.com/firmwares/
Download magisk manager
1. First of all, download magisk manager from this link.
Magisk manager:- https://www.apkmirror.com/apk/topjo...magisk-manager-0850bca9-android-apk-download/
2. Install the magisk manager.
3. Open the magisk manager and tap install.
4. Then select next and select patch a file.
5. Select your AP which we extracted above from your device stock frimware.
6. Then tap on let's go.
7. It will patch your AP file and it will save In your internal storage download folder.
Now, save that magisk_patched.tar in your pc.
Now unlock the bootloader
For unlocking bootloader:- This will wipe all your data. So, take a backup of your phone before doing anything.
1. First of all,*Enable*Developer Mode.
2.Launch the Settings application
3.Scroll down and tap on the Developer Options option
4.Toggle the*OEM*Unlock option on*
5.Confirm by tapping the enable option.*
6.Power off your device.
7.Press*volume up+Volume Down at the same time*and plug in your device to a PC to boot into download mode
8.Long press volume up to unlock the bootloader.*This will wipe your data and automatically reboot.
Rooting the phone
1. Go into download mode and press volume up button once.
2. Download odin from the link given above.
3. Lauch odin and tap on AP and select the magisk_patched.tar.
4. Then flash the file.
5. Don't boot your device.
6. Go into recovery mode by pressing volume up and power button and wipe all the data. ( Because if you will not do this it will show only 16 gb storage in your device)
7. Then reboot the device.
8. Then setup the phone.
9. Install magisk manager. It will show that it is not rooted for that go to settings-about phone-reset and select factory data reset.( This will not reset your phone).
IF YOU WANT TO REBOOT YOUR PHONE THEN DO IT USING MAGISK MANAGER.
(Don't install any incompatible magisk module because it can un root the phone)
I hope that someone make twrp for A30s so we can easily root the phone and also install gsi roms.
Congratulations . Your have successfully rooted your phone.
Akshar1420 said:
6. Go into recovery mode by pressing volume up and power button and wipe all the data. ( Because if you will not do this it will show only 16 gb storage in your device)
Click to expand...
Click to collapse
Thanks for the great how-to. I'm looking at buying an A30s, but rooting and retaining encryption on the data partition is key for me. I gather that step 6 above will format the data partition, leaving it unencrypted (which is why you get more than the 16 gb if you wipe it - correct?) Will this method allow me to re-encrypt the phone after rooting?
Also, would you mind clarifying about losing root if not using Magisk to reboot - does that include powering off as well?
stgibson said:
Thanks for the great how-to. I'm looking at buying an A30s, but rooting and retaining encryption on the data partition is key for me. I gather that step 6 above will format the data partition, leaving it unencrypted (which is why you get more than the 16 gb if you wipe it - correct?) Will this method allow me to re-encrypt the phone after rooting?
Also, would you mind clarifying about losing root if not using Magisk to reboot - does that include powering off as well?
Click to expand...
Click to collapse
Yes, if you wipe data from recovery mode it will give you your phone's storage. You will lose warranty, Samsung pay, knox, secure folder, etc.. you can't get it back also if you unroot the device or re-flash the frimware. And power off will also unroot the device. For that you can reset the phone from Settings it will not format your phone. And rooting the phone or using custom frimware will give you less security so high changes of hacking.
Thanks! I ended up getting an A7 instead of A30s, but it's good to know. I try to only buy rootable phones, and I know that some phones can be rooted and still encrypted, like the S7, hence the question.
root
Hi,
I have successfully root my a30s with method described above . All root apk works OK only LuckyPatcher dont , dont know why . It is the only program that dont receive root permissions .
Anyway thanks
Regards
Alex
Try re rooting
valexvo1953 said:
Hi,
I have successfully root my a30s with method described above . All root apk works OK only LuckyPatcher dont , dont know why . It is the only program that dont receive root permissions .
Anyway thanks
Regards
Alex
Click to expand...
Click to collapse
Try to re-root phone. Hope works!
1. Open magisk manager
2. Click on the first install button
3. Click on direct install
Then reboot the phone using magisk.
I hope this works
root
I have rerooted twice still the same result
valexvo1953 said:
I have rerooted twice still the same result
Click to expand...
Click to collapse
Can you just message me personally?
Would it possible for you to download the bopt img and mail me the file. Mines A307gndxua4btg1 Thailand version. Please it wud really help me alot.. I am unable to download because of my network connection. I stay with my parents due to corona and we stay far from town and network is very ****ty here in village. I bricked my A30s yesterday using another versions it was different country but same a307gn..Boot img. I think only my exacr mentioned abovee wud work and now I been using an old family phone and tryin to download firmware but it took more than 10 hours and download stopped too..m so stressed. I didnt tell anyone i cant open my phone.. yet cuz this one is also new and i lost my phone last time.. i feel so bad.. i tried reset and wipe factory reset all..not working..if i can get the proper boot img..it wud help so much Please and thank you sooooo much... i wana try flashin proper boot img and see if it wud solve problem since i cant download whole 3.68 GB with bad network here. please help me
Is there a .tar of Lineage 18 to flash via Odin?
Sorry wrong thread
Dear pls tell me this AP file i patched is ok !!! A307FN u3 os11
A lot of people rooted are having issues with DEX with either systemUI closing, systemuidex closing or the app only staying open on PC pr TV for a few seconds.
Please can anyone who is rooted please let me know if they can access DEX and if so - is it working for you?
Please show a pic of magisk front screen with version number and state your exact rooting procedure
Hopefully we can then find out what is breaking dex
UNLESS anyone knows what sort of log may diagnose the issue? I have a dumpstate/logcat but not sure what part im looking at
exocetdj said:
A lot of people rooted are having issues with DEX with either systemUI closing, systemuidex closing or the app only staying open on PC pr TV for a few seconds.
Please can anyone who is rooted please let me know if they can access DEX and if so - is it working for you?
Please show a pic of magisk front screen with version number and state your exact rooting procedure
Hopefully we can then find out what is breaking dex
UNLESS anyone knows what sort of log may diagnose the issue? I have a dumpstate/logcat but not sure what part im looking at
Click to expand...
Click to collapse
We're do I get root how to for the u version
The only version that is rooted is the B version. The international, European, and North American versions are not able to be rooted.
We have root on the B variant
I believe the issue is related to having the "Data" folder being decrypted - This "Decrypting" process is on step # 4 under the 2nd process "PROCESS IF COMING FROM STOCK A12"
I have tried the process without the "Formatting the data" step which allows me to boot with root + Dex working. The only issue is that I'm limited to storage, It's fixed to 32gb out of the original size(512gb). Is there a way to resolve the limited storage issue?
Note: If we decrypt the data(Format data via twrp), we are restricted to:
- Cannot share pics in Samsung Gallary
- Dex's system ui constantly crashes
- Cannot install apps such as games that requires external downloads from installing an apk
- GMail cannot download embed files from an email
- ETC anything related to storage within the data, we cannot access/delete/edit when the data is decrypted
lilplanet said:
I believe the issue is related to having the "Data" folder being decrypted - This "Decrypting" process is on step # 4 under the 2nd process "PROCESS IF COMING FROM STOCK A12"
I have tried the process without the "Formatting the data" step which allows me to boot with root + Dex working. The only issue is that I'm limited to storage, It's fixed to 32gb out of the original size(512gb). Is there a way to resolve the limited storage issue?
Note: If we decrypt the data(Format data via twrp), we are restricted to:
- Cannot share pics in Samsung Gallary
- Dex's system ui constantly crashes
- Cannot install apps such as games that requires external downloads from installing an apk
- GMail cannot download embed files from an email
- ETC anything related to storage within the data, we cannot access/delete/edit when the data is decrypted
Click to expand...
Click to collapse
Thats some great info thanks very much
although that would also effect the download and install of Magisk potentially and that works - do you have an example of an app or game doing this so i can test?
i can confirm i cannot share pics directly from gallery but can within apps such as telegram
Downloading docs from Gmail is buggered
Dex is RIP.
@ianmacd do you think there is something we could be missing - we are effectively doing the disabler's job manually on F926B and its not unreasonable to think we may have missed something - could running the multidisabler be useful to see if it picks something up (even if it completely breaks things) so that we can then do the required modification manually?
exocetdj said:
Thats some great info thanks very much
although that would also effect the download and install of Magisk potentially and that works - do you have an example of an app or game doing this so i can test?
i can confirm i cannot share pics directly from gallery but can within apps such as telegram
Downloading docs from Gmail is buggered
Dex is RIP.
@ianmacd do you think there is something we could be missing - we are effectively doing the disabler's job manually on F926B and its not unreasonable to think we may have missed something - could running the multidisabler be useful to see if it picks something up (even if it completely breaks things) so that we can then do the required modification manually?
Click to expand...
Click to collapse
Me again
BVA9 STOCKRooted !
No sharing issues , and 100% working DEX
I used your BL file , extracted recovery from your AP File to make an Odin flashable TWRP.tar to sideload and flash your app-debug.zip
pvillasuso said:
Me again
BVA9 STOCKRooted !
No sharing issues , and 100% working DEX
I used your BL file , extracted recovery from your AP File to make an Odin flashable TWRP.tar to sideload and flash your app-debug.zip
Click to expand...
Click to collapse
whats your internal storage size? and have you reset device since you last managed to get this working?
Yes , I have reseted the phone.
When flashing to stock I used CSC ( the one that wipes data )
Did a stock recovery factory reset and also format data when I used the twrp recovery .
There is something with wrong with your AP file Bro , because I first used that file , and I tried the camera and had the sharing issue . Same happened with your older build , So I think the problem is there.
I Have the 256gb version
pvillasuso said:
Yes , I have reseted the phone.
When flashing to stock I used CSC ( the one that wipes data )
Did a stock recovery factory reset and also format data when I used the twrp recovery .
There is something with wrong with your AP file Bro , because I first used that file , and I tried the camera and had the sharing issue . Same happened with your older build , So I think the problem is there.
I Have the 256gb version
Click to expand...
Click to collapse
Ok sounds promising
Please can you provide a step by step procedure here and if i can replicate it i will amend the first post and files in the rooting thread
looks like formatting in TWRP could be the issue then - and we need to format at a different stage? (please still provide full process)
exocetdj said:
looks like formatting in TWRP could be the issue then - and we need to format at a different stage? (please still provide full process)
Click to expand...
Click to collapse
Yes , do that factory reset from stock recovery .
I also think the twrp format is not working as expected
edit : about the full process...
I ended again in a mess , and did several random stuff (as I got stuck some times in Download mode)
But .. If you ask me what I think that works , it would be like this:
1. Flash odin to stock , NOT using HOME_CSC
2. Do the initial setup (usb debugging and OEM status ( if shown ) checked
3. Flash odin the BL file , and TWRP.tar
4. TWRP , format ( I think nothing happened in this step ), reboot to TWRP , sideload and flash app-debug.zip
5. Reboot to download mode and flash stock recovery , and do the factory reset there ( at this step I tought I woud lose the previously flashed magisk stuff , but that didnt happen, and I got booted & rooted )
******
So I'm sure the BL file helped me to flash TWRP , because I tried it alone (TWRP) and it didn't work ( got bootloops ending in download mode ).
What I didn't try , now that Im reading myself , was to do a factory reset from stock , after doing that initial setup , and tried to flash that TWRP file right after that.
links to files :
AP_twrp_F926B_A12_BVA9
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
AP_stockrecovery_F926B_A12_BVA9
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
pvillasuso said:
Yes , do that factory reset from stock recovery .
I also think the twrp format is not working as expected
edit : about the full process...
I ended again in a mess , and did several random stuff (as I got stuck some times in Download mode)
But .. If you ask me what I think that works , it would be like this:
1. Flash odin to stock , NOT using HOME_CSC
2. Do the initial setup (usb debugging and OEM status ( if shown ) checked
3. Flash odin the BL file , and TWRP.tar
4. TWRP , format ( I think nothing happened in this step ), reboot to TWRP , sideload and flash app-debug.zip
5. Reboot to download mode and flash stock recovery , and do the factory reset there ( at this step I tought I woud lose the previously flashed magisk stuff , but that didnt happen, and I got booted & rooted )
******
So I'm sure the BL file helped me to flash TWRP , because I tried it alone (TWRP) and it didn't work ( got bootloops ending in download mode ).
What I didn't try , now that Im reading myself , was to do a factory reset from stock , after doing that initial setup , and tried to flash that TWRP file right after that.
links to files :
AP_twrp_F926B_A12_BVA9
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
AP_stockrecovery_F926B_A12_BVA9
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
do you have stock recovery or TWRP installed now you have root?
exocetdj said:
do you have stock recovery or TWRP installed now you have root?
Click to expand...
Click to collapse
Stock recovery now
I can try to flash twrp , and can go back to stock recovery if it doesnt work
exocetdj said:
do you have stock recovery or TWRP installed now you have root?
Click to expand...
Click to collapse
the key is that if you install TWRP now and dex and file sharing etc etc is still working then i need to look at these files
As far as im aware = the DEX issues are a result of having TWRP installed
exocetdj said:
the key is that if you install TWRP now and dex and file sharing etc etc is still working then i need to look at these files
As far as im aware = the DEX issues are a result of having TWRP installed
Click to expand...
Click to collapse
Well, then I can try to install twrp , and launch DEX to see how it goes
Be right back and let you know
edit :
Flashed TWRP successfully !
No sharing issues , Dex working fine !
pvillasuso said:
Well, then I can try to install twrp , and launch DEX to see how it goes
Be right back and let you know
edit :
Flashed TWRP successfully !
No sharing issues , Dex working fine !
Click to expand...
Click to collapse
ok so i am now rooted with stock recovery and everything is working - Dex, sharing etc etc
so i am missing TWRP
please can you go into finer detail into what you then did to install TWRP i need to have as much information as possible - please also confirm if you can mount data and flash files in TWRP if not then there is not really much point in having TWRP installed - i am thinking this is unlikely as you have not disabled forcencryption
I have managed to follow this far
1. Flash odin to stock , NOT using HOME_CSC
2. Do the initial setup (usb debugging and OEM status ( if shown ) checked
3. Flash odin the BL file , and TWRP.tar
4. TWRP , format ( I think nothing happened in this step ), reboot to TWRP , sideload and flash app-debug.zip
5. Reboot to download mode and flash stock recovery , and do the factory reset there ( at this step I tought I woud lose the previously flashed magisk stuff , but that didnt happen, and I got booted & rooted )
I am now rooted with stock recovery - i find it hard to see how we can just install TWRP and use it normally and mount /data without having to at least destroy user data each boot as forcencrypt has NOT been disabled
what is making things far too hard is a process that follows things like this:
"
edit : about the full process...
I ended again in a mess , and did several random stuff (as I got stuck some times in Download mode)
But .. If you ask me what I think that works , it would be like this: "
there are just too many variables - for instance, forceencryption could have been disabled without you realizing when doing the random bits - did you reflash my AP files at any point?
exocetdj said:
ok so i am now rooted with stock recovery and everything is working - Dex, sharing etc etc
so i am missing TWRP
please can you go into finer detail into what you then did to install TWRP i need to have as much information as possible - please also confirm if you can mount data and flash files in TWRP if not then there is not really much point in having TWRP installed - i am thinking this is unlikely as you have not disabled forcencryption
I have managed to follow this far
1. Flash odin to stock , NOT using HOME_CSC
2. Do the initial setup (usb debugging and OEM status ( if shown ) checked
3. Flash odin the BL file , and TWRP.tar
4. TWRP , format ( I think nothing happened in this step ), reboot to TWRP , sideload and flash app-debug.zip
5. Reboot to download mode and flash stock recovery , and do the factory reset there ( at this step I tought I woud lose the previously flashed magisk stuff , but that didnt happen, and I got booted & rooted )
I am now rooted with stock recovery - i find it hard to see how we can just install TWRP and use it normally and mount /data without having to at least destroy user data each boot as forcencrypt has NOT been disabled
what is making things far too hard is a process that follows things like this:
"
edit : about the full process...
I ended again in a mess , and did several random stuff (as I got stuck some times in Download mode)
But .. If you ask me what I think that works , it would be like this: "
there are just too many variables - for instance, forceencryption could have been disabled without you realizing when doing the random bits - did you reflash my AP files at any point?
Click to expand...
Click to collapse
I agree with you about the variables
In short
I was rooted with stock BL6 and twrp
So I flashed to this newest stock , and tried to keep my setup and get rooted again
I flashed HOMECSC and after that gave a shot with newest twrp ( to flash newest app-debug.zip )
I ended with a download mode bootloop
So I used your guide with your files , everything went fine .. except for the sharing and dex issues
This is when the forceencryption could have been disabled , exactly !
Then , I did the steps above , back to 100% stock ( steps above ) , without your AP File this time .
TWRP , is useless at this point , it cant mount data , it is the same behaviour as with BL6 version
Edit : Nice that you could replicate it !
"ok so i am now rooted with stock recovery and everything is working - Dex, sharing etc etc "
pvillasuso said:
I agree with you about the variables
In short
I was rooted with stock BL6 and twrp
So I flashed to this newest stock , and tried to keep my setup and get rooted again
I flashed HOMECSC and after that gave a shot with newest twrp ( to flash newest app-debug.zip )
I ended with a download mode bootloop
So I used your guide with your files , everything went fine .. except for the sharing and dex issues
This is when the forceencryption could have been disabled , exactly !
Then , I did the steps above , back to 100% stock ( steps above ) , without your AP File this time .
TWRP , is useless at this point , it cant mount data , it is the same behaviour as with BL6 version
Click to expand...
Click to collapse
Thanks for the info
looks like using TWRP at a starting point is the only way thats going to be of any use - rooted stock is the way forward!!!
exocetdj said:
Thanks for the info
looks like using TWRP at a starting point is the only way thats going to be of any use - rooted stock is the way forward!!!
Click to expand...
Click to collapse
Sure Bro , no problem