Develop Bugs

Using this methode CM11 w/ new partition layout. +9 GB /data

Hi everyone,
when i use this methode: http://forum.xda-developers.com/showthread.php?t=2796232
Can i update my fone with the nitghlies and snapshot normaly or i must patch the system with the patched Archive?
Sorry for my bad question
Regards
Sven

TheVaiper said:
Hi everyone,
when i use this methode: http://forum.xda-developers.com/showthread.php?t=2796232
Can i update my fone with the nitghlies and snapshot normaly or i must patch the system with the patched Archive?
Sorry for my bad question
Regards
Sven
Click to expand...
Click to collapse
I'm not sure with that setup, I honesty didn't read through the whole thing.
But you should give this a read: http://www.oppoforums.com/threads/tutorial-unified-storage-layout-for-oppo-find-7a.17952/
It is laid out pretty easily and it also has links to unified nightlies that are supported.

It is super easy. All you do is run one .exe file in Fastboot mode, wait 5 mins, and you're done. Only NamelessROM and Gummy ROM are supported. Cm11 won't be supported.

azeem40 said:
It is super easy. All you do is run one .exe file in Fastboot mode, wait 5 mins, and you're done. Only NamelessROM and Gummy ROM are supported. Cm11 won't be supported.
Click to expand...
Click to collapse
Hmm, but i would use CM11 so this won't use for me

TheVaiper said:
Hmm, but i would use CM11 so this won't use for me
Click to expand...
Click to collapse
Yeah, you will have to choose. Can't have both unfortunately. I wouldn't recommend the first method in this post. The one I mentioned only requires an exe file to be run.

azeem40 said:
Yeah, you will have to choose. Can't have both unfortunately. I wouldn't recommend the first method in this post. The one I mentioned only requires an exe file to be run.
Click to expand...
Click to collapse
And Nameless Rom is based off CM nightlies with cherry picks and fixes before CM gets to it with extra options. It's really a great ROM.

[Q&A] [OTA] romBUZZ v1.4 -October 17

Q&A for [OTA] romBUZZ v1.4 -October 17
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OTA] romBUZZ v1.4 -October 17. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

how to install new OTA updates?
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!

adi8837 said:
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!
Click to expand...
Click to collapse
hey! just install v1.1 and then using the ota service from the device, update it.
or else, download all the updates from the thread and install them

Please help
Do i need to download version 1.3 directly or first il have to download v1.0..?

apuhira93 said:
Do i need to download version 1.3 directly or first il have to download v1.0..?
Click to expand...
Click to collapse
1.1 > 1.3 > 1.4
only 1.1 is big in size
EDIT I meant 1.0 > 1.1 > 1.3 > 1.4 > 1.5
Only 1.0 is big.

query
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom

Simply awesome
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal

bhargav.k said:
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
naruto1997 said:
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal
Click to expand...
Click to collapse
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.

downloading error
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0

pranjal18 said:
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.
Click to expand...
Click to collapse
No problem.Do you make note 3 roms?

bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed

aishwar98 said:
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0
Click to expand...
Click to collapse
link is working. I checked. You check again.
naruto1997 said:
No problem.Do you make note 3 roms?
Click to expand...
Click to collapse
not at the moment. But I think Note 3 rom has already been ported to this device.
bhargav.k said:
bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed
Click to expand...
Click to collapse
You do not have meta-inf and updater script right?
You will have to make your own updater script...depending upon in which partition your system, boot, etc are. Google these two and you will find proper guide threads.
Also, you can use (after editing) another rom's updater script. That rom should belong to your device.

pranjal18 said:
link is working. I checked. You check again.
not at the moment. But I think Note 3 rom has already been ported to this device.
Click to expand...
Click to collapse
No i mean roms that i can flash on note 3.

naruto1997 said:
No i mean roms that i can flash on note 3.
Click to expand...
Click to collapse
No. Not working on those

unable to install rombuzz on canvas 4
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra

smahapatra said:
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra
Click to expand...
Click to collapse
Are you using Master Awesome's CWM recovery? The background colour of recovery should be Grey. The link is present in post 1.

guys i flashed a self created rom got boot loop so tried to backup rombuzz rom but started imei issue so flashed stock imei issue still there so followed karthiks method and solved issue but whenever i flash new rom i get imei issue how to solve permanently

karthik's method is?

Notification and music/radio
Hello,
I found a bug: when i listen music or fm radio and a notification arrive : the music stops playing, the screen is black and the power button is disabled.
LED notification flashes but nothing more.
The only solution is to remove the battery and cut the next time connexion data
Otherwise it is one of the most successful ROM I've tested, thank you !

pranjal18 said:
karthik's method is?
Click to expand...
Click to collapse
i used sn write tools and got my imei number back bro but again i flashed a rom same issue
bro i made a rom elie e3 kitkat system and boot.img in kitchen it created updater script itself the rom shows installation complete but stuck at boot loop how to make a kitkat rom using system and boot.img of other stock rom

Cyanogen OS 13

Hey guys
Does anyone know when we will get Cyanogen OS 13? I have been on stock for 2 weeks now due to a rumour of COS13 coming. If you have any news or even a beta build then please post it below.
Regards
Yasteel

AFAIK it's already released.
Android one Second Gen user here

nhmanas said:
AFAIK it's already released.
Android one Second Gen user here
Click to expand...
Click to collapse
really? I do not see it on https://cyngn.com/support

Dior DNA said:
really? I do not see it on https://cyngn.com/support
Click to expand...
Click to collapse
Ota released. Not ROM.

I though it was only the one plus one and only in india that rec'd the update
and still without the Modlife implementation

nhmanas said:
Ota released. Not ROM.
Click to expand...
Click to collapse
thanks! and what is name like cm-12.1 was YOG7DAS2FI crackling?

Dior DNA said:
thanks! and what is name like cm-12.1 was YOG7DAS2FI crackling?
Click to expand...
Click to collapse
I don't know we're discussing in a Turkish forum

nhmanas said:
I don't know we're discussing in a Turkish forum
Click to expand...
Click to collapse
once someone receives OTA cm 13 let us know, then we can ask support to publish file

Dior DNA said:
once someone receives OTA cm 13 let us know, then we can ask support to publish file
Click to expand...
Click to collapse
http://builds.cyngn.com/incremental/crackling/cm-crackling-c295bd1167-to-f865a1ad0e-signed.zip
6.0.1 ota

This is Cyanogen Mod, not Cyanogen OS.

koegs said:
This is Cyanogen Mod, not Cyanogen OS.
Click to expand...
Click to collapse
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well

ReneX10 said:
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well
Click to expand...
Click to collapse
updater-script says
Source 5.1.1 LMY48Y/YOG7DAS2FI
Target 6.0.1 MMB29V/ZNH0EAS25I

ReneX10 said:
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well
Click to expand...
Click to collapse
1. update package was verified without problems
2. installed without problems
3. won't boot... can't even get into recovery

InFlames0r said:
1. update package was verified without problems
2. installed without problems
3. won't boot... can't even get into recovery
Click to expand...
Click to collapse
Mine was a clean stock 12.1 install first, then update applied from recovery to 13
Mine is working just fine, no problems to report at all..... hrmm so, I wonder what's different
http://s32.postimg.org/vz9j03dhx/Screenshot_20160429_190709.png

Me too that's exactly what I did load 12.1 by fastboot to ensure everything is overwritten
note super su stock dosn't work but the beta does

I'm I noob here and I don't understand what everybody's talking about here. From my understanding, a flashable COS13 zip is out in the open and works? How should I go about flashing it if I want to keep TWRP recovery? Do I have to do a clean install?

seb5049 said:
I'm I noob here and I don't understand what everybody's talking about here. From my understanding, a flashable COS13 zip is out in the open and works? How should I go about flashing it if I want to keep TWRP recovery? Do I have to do a clean install?
Click to expand...
Click to collapse
as far as I am aware there is NO COS 13 zip for the crackling, only this incremental update (ie an update from 12.1, so that needs to be installed as a base first and then the update flashed from recovery)
There is CM 13, both snapshots and nightlies that an be flashed from TWRP as ZIPs
TWRP an be flashed from fastboot whenever you like, so that shouldn't cause you any major concerns :good:

ReneX10 said:
as far as I am aware there is NO COS 13 zip for the crackling, only this incremental update (ie an update from 12.1, so that needs to be installed as a base first and then the update flashed from recovery)
There is CM 13, both snapshots and nightlies that an be flashed from TWRP as ZIPs
TWRP an be flashed from fastboot whenever you like, so that shouldn't cause you any major concerns :good:
Click to expand...
Click to collapse
I have the stock rom already (COS 12.1), so does that mean I'm good if I flash it then?

seb5049 said:
I have the stock rom already (COS 12.1), so does that mean I'm good if I flash it then?
Click to expand...
Click to collapse
Personally I would ensure I have backed up, but in theory ..Yes, though if it were me.. I would, backup, wipe, flash stock recovery, update
I am afraid I can't answer fully, as I always flash clean...soz

ReneX10 said:
Personally I would ensure I have backed up, but in theory ..Yes, though if it were me.. I would, backup, wipe, flash stock recovery, update
I am afraid I can't answer fully, as I always flash clean...soz
Click to expand...
Click to collapse
Ok. Well, if I backup beforehand then I should be fine if anything goes wrong. One last question though, do I need stock recovery in order to flash the zip?

T.A.R.S. 5.9.20s by Steve Mars Final Version Google Play Installed for Le Pro 3 x720

Thanks to STEVE_MARS the roms cooker.
Google Translate from Spanish
Very good to everyone, compis.
I present my first Custom Rom for the new LeEco Le Pro2 X720, a piece of terminal that arrived yesterday.
It is based on the 20s version of EUI 5.9, with the following changelog:
- Clean of Chinese applications.
- Play Store installed.
- Synchronization of contacts and calendar with the Google account.
- Rooted.
- Busybox installed.
- Bloated.
- Changed the splash so that the boot is not in Chinese.
- Changed the animation boot by Google.
- Included Root Explorer.
- Including Google Pixel Launcher, for those who do not like the Launcher EUI.
- Including animated wallpapers of Google Pixel, very cool.
- Small and very light tweaks of performance improvements.
In my blog you have several catches, one of them with the punctuation of Antutu:
http://tars-lepro3.blogspot.com.es/
Download Link: https://mega.nz/#!n1UHEbaA!y1Z0Lkz7I...VbFqNaGcNlwutM
Click to expand...
Click to collapse
Original Thread
02/12/2016 Download T.A.R.S. 5.9.20s Final Version : Main Mirror
28/11/2016 Download T.A.R.S. 5.9.20s : Main Mirror

thanks....i am dl it....will try it to flash later...[emoji122]
so far so good..!!
i flashed it over the 20s with dalvik and cache clean only....no problem......and nice bootanimation..!!
one problem i have found out on 20s is...when i turn off the animations in developer options they do not stay off after i reboot the phone.... they`re on again...
Sent from my LEX720 using XDA-Developers mobile app

Peter-C said:
Thanks to STEVE_MARS the roms cooker.
Google Translate from Spanish
Original Thread
Download Link : Main Mirror
Click to expand...
Click to collapse
Many, many thanks my friend
I didn´t want to share my ROM yet, because I can´t test it. My phone will arrive this weekend (I hope so), but if you install it and all work fine, it´s great ¡¡¡¡ Well done ¡¡¡
I want do it better when I have my phone, I´ll check this rom and make best perfomance.
A big hug for you.
P.D. Sorry for my english... it´s a pity that I didn´t study more when I was young

STEVE_MARS said:
Many, many thanks my friend
I didn´t want to share my ROM yet, because I can´t test it. My phone will arrive this weekend (I hope so), but if you install it and all work fine, it´s great ¡¡¡¡ Well done ¡¡¡
I want do it better when I have my phone, I´ll check this rom and make best perfomance.
A big hug for you.
P.D. Sorry for my english... it´s a pity that I didn´t study more when I was young
Click to expand...
Click to collapse
Hi, so sorry that I didn't ask for the permission to share the Rom, your rom very fast and smooth. Thanks for your work hope you will get your device soon.

Peter-C said:
Hi, so sorry that I didn't ask for the permission to share the Rom, your rom very fast and smooth. Thanks for your work hope you will get your device soon.
Click to expand...
Click to collapse
Dont worry !!! Its ok!!!
I had read about problem of 2nd SIM if you install on x720 a developed rom of x727, because x727 hace only one SIM. I check it this when my phone arrive.

STEVE_MARS said:
Dont worry !!! Its ok!!!
I had read about problem of 2nd SIM if you install on x720 a developed rom of x727, because x727 hace only one SIM. I check it this when my phone arrive.
Click to expand...
Click to collapse
Does your ROM contain bootloader and baseband?
Thanks for your work.
Sent from my LEX727 using Tapatalk

phidung3721 said:
Does your ROM contain bootloader and baseband?
Thanks for your work.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
No, my ROMs never contain bootloader and baseband. I think that this are a LeEco responsability, a wrong flash or this files may cause damage on our phones.
Youre welcome ¡

This rom Turkish Language?

Very good ROM so far
I'm still using your ROM since yesterday night and so far its solid and I removed even more leeco bloat with root uninstaller. So far your ROM has the lowest RAM usage by far.
When I do clear all recent apps still have a 2.6GB RAM free!
If there is anything you like to ask or know just reply and I will do my best to answer. I'm using the Chinese Leeco Le Pro 3 from Honorbuy (X720). Been flawless after rooting and flashing TWRP with the Grossoshop ROM and now yours.

klapcos said:
I'm still using your ROM since yesterday night and so far its solid and I removed even more leeco bloat with root uninstaller. So far your ROM has the lowest RAM usage by far.
When I do clear all recent apps still have a 2.6GB RAM free!
If there is anything you like to ask or know just reply and I will do my best to answer. I'm using the Chinese Leeco Le Pro 3 from Honorbuy (X720). Been flawless after rooting and flashing TWRP with the Grossoshop ROM and now yours.
Click to expand...
Click to collapse
I´m glad to hear this ¡¡¡
Two sims work fine, data and 4G, camera with all features?.
Many thanks.

STEVE_MARS said:
I´m glad to hear this ¡¡¡
Two sims work fine, data and 4G, camera with all features?.
Many thanks.
Click to expand...
Click to collapse
I only have 1 SIM and yes 4G works and tested the camera, all works fine. No issues yet....
I will off course report back during the week on how I get on with it.
I'm on three.ie network in Ireland FYI

On my device (X720) the Rom doesnt boot.
I wiped dalvik/Cache and data and installed the Rom.

Check if your file are wrong, download again please.
I dont test yet, but other users had installed it without problems.

STEVE_MARS said:
Check if your file are wrong, download again please.
I dont test yet, but other users had installed it without problems.
Click to expand...
Click to collapse
Hi,
i tryed out another time with a new twrp version.
But same problem.
It stucks on splash screen
i wiped dalvilk, cache, data and system before install rom.

I'm using with x720 Chinese model, all working perfectl can't find any issue yet. Thanks @STEVE_MARS
Sent from my LEX720 using Tapatalk

T.A.R.S 20s
Hi all,
I'd like to flash on Grossshop 18s.
just clean cache / dalwik cache and flash is OK?

enrealman said:
Hi all,
I'd like to flash on Grossshop 18s.
just clean cache / dalwik cache and flash is OK?
Click to expand...
Click to collapse
Yes, it worked for me. Made a backup in case.

meuhmeuh51 said:
Yes, it worked for me. Made a backup in case.
Click to expand...
Click to collapse
thanks for reply. one more question, turkish language available in this rom?

enrealman said:
thanks for reply. one more question, turkish language available in this rom?
Click to expand...
Click to collapse
sorry I do not know. I'm on cm13 right now.

I tryed another time.
i flashed over my 17s the GrossoShop 18s Rom. That worked and the rom boots.
After that i flashed the T.A.R.S. Rom over my GrossoShop 18s Rom and wiped cache and dalvik.
But it still stucks in splash screen
I tried also another 20s Rom. "V2_LE_ZL1_LEX720-CN-FN-WAXCNFN5902011181S-5.9.020S". This Rom stucks in TWRP when installing on "patching system image unconditionally"

[ROM] [11] [5 & 5T] FluidOS R

Content of Opening Post removed on request of thread owner @Maitreya29

Very keen to test your new rom. Which Gapps do you recommend? Thank you

CM06 said:
Very keen to test your new rom. Which Gapps do you recommend? Thank you
Click to expand...
Click to collapse
bitgapps recommended

CM06 said:
Very keen to test your new rom. Which Gapps do you recommend? Thank you
Click to expand...
Click to collapse
Bitgapps since they are very battery efficient and have no setup wizard so first boot would be lightning fast.

Do you have a download link for Bitgapps?

I also used FlameGApps full and worked fine.

ok thank you

CM06 said:
Do you have a download link for Bitgapps?
Click to expand...
Click to collapse
here you go
[CUSTOM][GAPPS] BiTGApps for Android
Hi All, Welcome to the official BiTGApps Release thread! BiTGApps is a customized Google Apps Package to sideload Google Apps in Custom Android OS. It comes with many useful features and easy installation. Get features list, instructions...
forum.xda-developers.com

The rom is very good and runs smooth.
Only issue is getting the At A Glance to show the weather.
There doesn't seem to be an option to enable it or get rid of it completely so I can use the google widget.

Just a general question. Does this rom support nightly builds?

Please Share the Screenshots of the ROM, it would be appreciated.
Thank You

Shawnmax1994 said:
Please Share the Screenshots of the ROM, it would be appreciated.
Thank You
Click to expand...
Click to collapse
You should have read the whole post, I have shared link to screenshots.

Makivante said:
The rom is very good and runs smooth.
Only issue is getting the At A Glance to show the weather.
There doesn't seem to be an option to enable it or get rid of it completely so I can use the google widget.
Click to expand...
Click to collapse
Hello, that happens to be a pixel launcher issue. Google has made it impossible to remove it. Only solution is to change launchers.

Mr.Conkel said:
Just a general question. Does this rom support nightly builds?
Click to expand...
Click to collapse
Source changes are only pushed out after they have been thoroughly tested for a few weeks so there's no need for nightly builds.

Option for switching NavBar order is greyed out? How come? I would really like to use that feature

I'm sorry if it's a stupid question. But I'm on another custom rom right now. When I tried to install Fluid, it said firmware 10.0.1 required or something like that. So should I go back to oxygen OS and then install Fluid?

pamalamadingdong said:
I'm sorry if it's a stupid question. But I'm on another custom rom right now. When I tried to install Fluid, it said firmware 10.0.1 required or something like that. So should I go back to oxygen OS and then install Fluid?
Click to expand...
Click to collapse
no, you just need to flash firmware 10.0.1 only. try to search "shadowstep essential" on telegram, you'll got what you need.

Does this rom support face unlock

Added to the OnePlus 5 Index Thread here.

Athreya11 said:
Does this rom support face unlock
Click to expand...
Click to collapse
Yes, I have personally tested it and it works.