[rom][6.0.1] aokp mm [jfltetmo][unofficial] - T-Mobile Samsung Galaxy S 4

[rom][6.0.1] aokp mm [jfltetmo][unofficial] - T-Mobile Samsung Galaxy S 4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To God be the glory, my AOKP project finally works!
This is not a dirty unicorn. This is the original unicorn, the AOKP. Now made out of a marshmallow! That's right, all of the AOKP stuff you love, plus CyanogenMod's theme engine, plus Paranoid Android's Pie, and more! All wrapped up into one! With tons of settings from status bar tweaks to home button remaps, it's all here and ready to rumble!
**** This is an UNOFFICIAL ROM. Install at your own risk! ****
Downloads:
Rom Download link:
http://www.mediafire.com/download/y669np9yxsahxdn/aokp-jf-mm-20160913.zip
Gapps link:
http://opengapps.org/
-Which I personally tested Pico and Nano. Be sure to choose "Arm" and "6.0".
Old Rom Download:
http://www.mediafire.com/download/2g225ob9ga5a34b/aokp-jf-mm-20160830.zip
This Rom has been very stable for me. Be sure to follow these installation steps very carefully, as they may be different then what you are used to.
Installation instructions:
-Download ROM and gapps, and put them on your phone or external storage.
-Reboot into recovery mode - TWRP (I personally installed this using 3.0.2-0).
-Backup what you had. (Just to be safe.)
-Wipe. (I personally wipe everything prior to flashing new roms, but at least do the basic wipe.)
-Install Rom.
-Wipe Cache and Davlik.
-Install Gapps. - Optional
-Reboot to system and enjoy!
Code:
What works:
So far everything that I have tried works, such as
- Camera for pictures and video!
- Phone calls/receiving
- Data 2g/3g/LTE
- Bluetooth
- WiFi -First boot WiFi does not work, but reboot and it will work just fine after that.
- MTP
- GPS
etc....
What doesn't:
- None that I know of, but if you find one, please let me know so we can try to fix it!
- Post #2 will be updated with notes.
This AOKP MM ROM was built for the JFLTETMO, the T-Mobile Samsung Galaxy S 4. I have not tried this on any other device, but you are welcome to try it AT YOUR OWN RISK. See post #3 for successful tests on other devices.
A huge thanks to the Android Open Kang Project team!
Disclaimer: AOKP is not responsible for any damages to your device.
All of my work is completely available for any who wish to use or modify it. I didn't make AOKP, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.
AOKP XDA Forum: http://forum.xda-developers.com/aokp
Source Code: https://github.com/AOKP
Official website: http://aokp.co/
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.112
Based On: Overall AOSP and some CyanogenMod.
My device tree: https://github.com/alaskalinuxuser/
Features the AKLU kernel:
http://forum.xda-developers.com/gal.../kernel-marshmallow-lollipop-kernels-t3411543
Created 2016-06-03
Last Updated 2016-12-20
Change log:
Code:
20160913
-Now built with openjdk-8-jdk - Java 8!
-Sync with AOKP source.
-Security patch updates to September 6th, 2016.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160830
-Now built with openjdk-8-jdk - Java 8!
-Sync with AOKP source.
-Old school boot animation from the AOKP team.
-Updated AudioFX app.
-Security patch updates to August 5th, 2016.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160801
-Sync with AOKP source
-Security patch updates to July 5th, 2016. - Important Qualcomm security updates for our phone.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160720
-Added GPU Overclock - use with Kernel Adiutor
-Edited updater script so that it may be flashed on any JFLTE phone.
20160718
-Set SELinux to permissive.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160716
-Fixed video recording, now works properly! (Praise God!)
-Dropped Android browser and added CM13's Gello browser.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160710
-Synced with AOKP source
-PA Pie added!
-Lots of great updates and fixes!
-Removed NFCPU in favor of Kernel Adiutor app
-Edited updater script so that it may be flashed on any JFLTE phone.
20160707
-Added Kernel Adiutor app
-Added Fast Charge commits to the kernel.
-Edited updater script so that it may be flashed on any JFLTE phone.
20160623:
-Added Lionheart and Smartmax kernel governors
-First boot WiFi does not work, but reboot and it will work just fine after that.
20160619:
-Synced with AOKP source
-Edited default background
-Added "No Frills CPU" app to build
-Fixed mGerrit app
20160603:
-First build release.

Here are some screenshots:

Let me know what you guys think!
Noteworthy features:
Code:
-CyanogenMod Theme Engine (CMTE)
-Kernel Aduitor App
-Rom Control
+ Wakelock blocker
+ Slim Recents
+ PA Pie
+ Lockscreen DT2S
+ Status Bar AOKP logo
+ Breathing missed calls
+ Status Bar icon control
+ Status Bar network traffic
+ Smart Pulldown
+ Hardware key settings
+ Power menu screenshots and screen record
+ Volume step adjustments
+ Gesture Anywhere
+ Toast Animations changer
+ App Circle Bar
And more!
I highly recommend setting your LCD density to 320 to get the most from this screen.
Bluetooth work around:
Okay, so I finally got a cheap Bluetooth speaker so I could better understand the Bluetooth problems, and I too received the call of death.
However, I realized what darazor has been trying to tell everyone all along, and now I want to expound on that to help others.
When using Bluetooth, if you pair with an audio device (speakers, car, headset, etc.) And you have not adjusted any settings, the default for each audio device is phone and media. This will cause the COD if you get a phone call while playing music or other media.
So, if you want to use Bluetooth devices to play music:
Go to settings, Bluetooth, and click on the gear (settings) icon next to your paired speakers, and choose media, and unchecked phone. (See picture.) Now, when playing music, my phone vibrates and the screen comes on to tell me I have a call. Then, I can answer it, and the music stops. All is well.
If you want to use your hands free headset, choose phone and unchecked media. (See picture for reference.) And it should work for calls.
I now understand what everyone was talking about, and will do my best to look into it. Thanks @darazor for pointing this out, hopefully this lengthy explanation makes it clearer.
Governors:
Code:
If you want to save battery life, I recommend that you use the Kernel Aduitor app, and set your Governor to SmartMax, and your I/O scheduler to Noop. This may affect performance slightly, but will save on some battery power.
If you want to increase performance, I recommend that you use the Kernel Aduitor app, and set your Governor to Lionheart, and your I/O scheduler to CFQ. This will boost performance slightly, but will have a negative impact on battery power.
The governor is currently set to Interactive, which is a good balance.
Fast Charge:
To use Fast Charge, you must enable it in the Kernel Adiutor app. If you want to set custom settings, you will need to get another app from the Play Store, such as Device Manager or other apps that allow you to control the fast charge settings. Note that some fast charge settings apps do not change the appropriate values to function. The lockscreen may still say "slow charge" as the rom itself does not natively support fast charge, even though the kernel does.
Thanks @khaoticking for sharing that this rom works on jflteaio!
Thanks @alesu69 for sharing that this rom works on jfltexx (i9505)!
Thanks @darazor for testing and finding that Xposed modules work on this rom!

Standard bluetooth issues?
.
Thanks for the hard work!!
Sent from my SGH-M919V using XDA-Developers mobile app

always cool to have more ROMs for our phones! Many thanks, and yes also wondering about BT stability.

kazzxtrismus said:
Standard bluetooth issues?
.
Thanks for the hard work!!
Sent from my SGH-M919V using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks.
As for the Bluetooth, I do not have any devices to test with, so I test it by sending and receiving a file to and from someone else's phone, which works great. However, I would think the standard Marshmallow Bluetooth issues would apply here as well.
I took the base of the device tree from the SlimLP build, in which the Bluetooth was great, but I had to use vendor blobs from Marshmallow ROMs to make it work, so it will probably have the same Bluetooth issues as the other CM Marshmallow ROMs.
Sent from my SGH-M919 using XDA-Developers mobile app
EDIT: The Bluetooth does work, but you need to adjust a setting. For working Bluetooth see post #3 "Bluetooth Workaround".

For what it is worth, here was the benchmark result:
Not bad, but not as good as the benchmark from the SlimLP ROM.
Sent from my SGH-M919 using XDA-Developers mobile app

AlaskaLinuxUser said:
For what it is worth, here was the benchmark result:
Not bad, but not as good as the benchmark from the SlimLP ROM.
Sent from my SGH-M919 using XDA-Developers mobile app
Click to expand...
Click to collapse
I found your marks to be pretty accurate even with AdAway, Task Killer, lookout and nova launcher running I got just under 39900.

darazor said:
I found your marks to be pretty accurate even with AdAway, Task Killer, lookout and nova launcher running I got just under 39900.
Click to expand...
Click to collapse
Thanks, I am glad that the ROM is measuring up!
Sent from my SGH-M919 using XDA-Developers mobile app

AlaskaLinuxUser said:
Thanks, I am glad that the ROM is measuring up!
Sent from my SGH-M919 using XDA-Developers mobile app
Click to expand...
Click to collapse
I can report that Bluetooth seems to work fine. Connected to my Garmin Nuvi and was able to make calls from same. While not a definitive test it is very promising.

Great Rom
So far in a week of using this rom, it works pretty damn good. very stable only a couple of issues...
Contacts list disappears randomly.
Takes about 2 -3 minutes to reboot.
Waze app force closes.
The bluetooth works without problems.
Overall, I'm pretty happy with the results.

cirrus97 said:
So far in a week of using this rom, it works pretty damn good. very stable only a couple of issues...
Contacts list disappears randomly.
Takes about 2 -3 minutes to reboot.
Waze app force closes.
The bluetooth works without problems.
Overall, I'm pretty happy with the results.
Click to expand...
Click to collapse
Cirrus97,
Thanks for the feedback. Yes, the reboots seem a bit slow to me as well. As for the contacts issue, I haven't seen it here, but for reference, which gapps did you use?
Also, does Waze app fc on startup, or randomly during use, or is there a specific action that causes it?
If you have the time, pulling a logcat for when these errors happen would be great! If not, that is okay, too.
Sent from my SGH-M919 using XDA-Developers mobile app

AlaskaLinuxUser said:
Cirrus97,
Thanks for the feedback. Yes, the reboots seem a bit slow to me as well. As for the contacts issue, I haven't seen it here, but for reference, which gapps did you use?
Also, does Waze app fc on startup, or randomly during use, or is there a specific action that causes it?
If you have the time, pulling a logcat for when these errors happen would be great! If not, that is okay, too.
Sent from my SGH-M919 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have not encountered this either. Using open gapps nano date 20160604. Contacts version 6.0.1

Bluetooth issues slightly
(works great but may experience a Sim disconnected, Bluetooth share stops responding and some other issues that dont effect to much)
Bluetooth audio / call works tested both on speaker and car
Have not used default music app
Notice that audio effects makes the audio alot lower (bluetooth)
Battery life is great compared to last rom I was running just ate all my battery in a hour with screen off
Superuser enabled/disabled for quick settings (for those who use snapchat an ect)
------------
Just some ideas about status bar/notification center
Anyone want a challenge? Notification drawer quick settings (make it like Samsung quick settings which is a single row with scroll)
Wish they made different notification drawers would be a lot nicer then current. Or at least a way to replace parts. Or even a horizontal status bar/notifications.

Hi
I'm new to relatively new xda. I have tried this custom rom on my s4 m919 and it works great. The only problem i have is that my battery dies really fast, Any suggestions or kernels that i can try?
Thanks

djrddragon said:
Hi
I'm new to relatively new xda. I have tried this custom rom on my s4 m919 and it works great. The only problem i have is that my battery dies really fast, Any suggestions or kernels that i can try?
Thanks
Click to expand...
Click to collapse
I'm actually getting better battery life than on my lollipop rom. Some thoughts:. Gapps nano so that you only use what you need. I use advanced Task Killer Free (by ReChild) . Also use Disable Service, AdAway, and Net Guard No Root Fire wall. You can read more about each one and see if they help. There are olther settings in the rom that will help reduce battery drain as well. If You don't use an app uninstall it. Good Luck.

Better battery life options: kernel tweaks.
When I put this together, I figured most AOKP users would be more on the power user scale, so I set the kernel for Performance and IO scheduler for BFQ. Pretty standard for average to heavier loads. However, if you want better battery life, you can download this free app on the play store. No-frills CPU Control found here (there are other apps, but I can vouch for this one working):
https://play.google.com/store/apps/details?id=it.sineo.android.noFrillsCPU
With this, you can set your kernel governor and io scheduler to anything you want. From a battery only perspective, you can set it for:
Powersave
Noop
But that is a bit extreme. You will notice "stuttering" when doing any task. A good alternative is to set your system for:
Conservative
Noop
Which can give moderate gains while not sacrificing too much performance.
Conversely, if you want more speed, use this:
Performance
CFQ
Which will just eat through your battery, but will really give your phone some "pep in it's step".
Many will argue facts and fiction, but the general community accepted power saving to performance chart looks like this:
I/O scheduler: Noop > BFQ > CFQ
(Row is Read over write, so it is really smooth for video playback, but very slow on writing to disk, which makes it hard to judge power saving vs performance.)
Governor: Powersave > Conservative > Interactive > Ondemand > Performance
(Userspace governor lets the app tell the kernel what speed it requires, this is unusual for a phone, usually used on servers. Most apps do not know how to use this function. I like to include it though, as a power user may have a use for it.)
Hope that helps.

L-Speed from the Store is also a good tool for some simple tweaking

Fixed
OK fixed the contacts & waze issue, cleared the cache & family, imported the contacts & reinstalled wake. Works great now! the battery life seems to be excellent and really good memory management. Like I mentioned the only issue is the long boot time. Keep up the great work.
AlaskaLinuxUser said:
Cirrus97,
Thanks for the feedback. Yes, the reboots seem a bit slow to me as well. As for the contacts issue, I haven't seen it here, but for reference, which gapps did you use?
Also, does Waze app fc on startup, or randomly during use, or is there a specific action that causes it?
If you have the time, pulling a logcat for when these errors happen would be great! If not, that is okay, too.
Click to expand...
Click to collapse

does this rom support my device , See below details
sprint galaxy s4 L720T
baseband : OH1
Please help guys !!!!

Related

[ROM]{4.3_r2.3}(Linaro optimized) Commotio/Vanir - B59 9/18/13

It has been some time since I posted on XDA. But I think it is finally time to post some of my ROMs here.
What is Commotio? I am a member of the Vanir development team, and this is my personal take on Vanir. It includes different features, scripts, and themes.
Support can be best found here or in our Google Community
Sometimes live support can be found here #vanir on freenode, please be patient.... we have day jobs too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Status Bar
- Quick Setting including numerous customizations
- Customize clock display and location, customize signal bar
- % displayed in battery + circle mod
- Transparency
Navigation Bar
- Customizable buttons + colors
- Customizable height + width
- Navi Ring
- Transparency
Lockscreen
- Fully customizable targets/rotation/widgets/ and more
- Transparency
General Tweaks
- Ad blocking
- PIE: with extended options
- Tablet UI Chooser
- DPI/LCD changer + force tablet settings mode
- Theme Chooser: Including inverted theme
- Galaxy Nexus Parts
- ADB over network
- Bravia Engine 3.0
- Custom Carrier text
- Custom backlight
- Expanded Desktop: with different modes
- Extended Power menu
- A-GPS. - Kang PrimeDirective –> Credit happily1986
- Long press back to kill (in developer options)
Application Tweaks
- Selectable Gtalk
- Expanded Phone: noise reduction, advanced settings, speaker proximity
- Expanded MMS including Quick Emoji
- Camera: Enhanced settings (credit CM)
- Functional Sound Recorder
- Koush’s Superuser
- Vanir Keyboard – removed tracking/logging – highly optimized
Performance Manager
- Processor governor + speed
- Voltage control
- I/o Scheduler
- Disable boot animation
- Enhance recent menu
Sound
- Hightly customized DSManager with 96k sample rate and more options/butter
- Quiet Hours
- DSP Manager included (Credit CM)
- Volume wake / rocker music controld
- Rewritten Speaker proximity designed for Commotio/Vanir
Debloated
- All inclusive ~180 MB –> 60 MB of Bloat removed
- Fully featured LatinIME Keyboard, but only 2.2 MB (normally 16-20 MB), removed tracking/logging
- And soo much more
Butter
- Compiled with linaro keychain
- GCC 4.8 w/ -O2 -fstrict-aliasing AKA highly optimized compiling for better results (like Linaro)
- Vanir.cfg – Set your CPU frequencies, colors, ZRAM, and much more. Set and once and forget; it stays on your SD card
- DHOtheory: Sets up the kernel/ROM the way I like it, then self destructs on first boot, so you can change it later
- Go-faster Axiom scripts
- Vanirice – makes everything just a bit smooth
- For every 1 user settings there are 5 power saving + performance tweaks tweaks
Theme
- TRIAGE theme – (Inspiration DroidTh3ory)
Gapps
- Included. Cherry-picked from numerous repos, and the Play store
- Added File Manager + Titanium BU (for easy crack flashing)
- Terminal added
Kernels
- Tuna - Uses Vanir's Custom Kernel
- This masterpiece of speed is the orginal work Dan Triftan is only distributed with our team's distributions.
Not Tuna? Search for your device here for the current included kernel
Source
Want to contribute? Please do, we are open to any type of help. Coding, website, art, forum support, everyone is encouraged to help
Want to Kang? Go for it, just cherry-pick to leave history/authorship intact (whether ours or other's).
Github/gerrit
Screenshots:
Look here
Files: MD5 found on download page
__________Goo.im__________NuclearMistake’s Server (use 2nd)
M# = Monolith/Milestone build
B# = build number
Recommended Settings: Set on first boot automatically with DHOtheory
InteractiveX 230-1350 with smartreflex
Color 220/200/265 -6/0/8 Gamma 1.2

Reserved why not?
I will also be happy to try to anser questions about Vanir here.
My Vanir nightlies are here:
http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/

I'm assuming this includes gapps since it's not listed in the steps? Happy Festivus. May your movie line be short and your Chinese food be hot.

gorillabiscuit said:
I'm assuming this includes gapps since it's not listed in the steps? Happy Festivus. May your movie line be short and your Chinese food be hot.
Click to expand...
Click to collapse
Correct everything is included. Apps, wiping, everything.

Can the nav size be change on this ROM ?
Thanks
Sent from my Galaxy Nexus using xda app-developers app

Blanko6 said:
Can the nav size be change on this ROM ?
Thanks
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
If you read the op, your questions would be answered

Does this have Facebook Contact Sync?
In screenshot the icon looks different.
Thanks.

Dammit...looks good. Going to flash!
Sent from my Galaxy Nexus using Tapatalk 2

After a month or so on a ROM that was working good for me, I got bored and thought I'd flash this over the holidays.
Just finished and got it all set-up. Everything generally seems to be working OK. I'll report back on battery life later.
One issue I noticed right away is that the symbols key next to the spacebar on the keyboard doesn't display the symbols if you long press. I believe that has something to do with the inverted look. I think menu selections for several apps including Chrome are also affected.
Another minor issue (for me) is that I'm not a fan of the search icon being gone from the Play store. Having to choose it from the menu just seems like an extra step.
Finally, I'd love to see more settings options in the notification pulldown. GPS should be there for sure, but I'd also like to see Torch or flashlight as well.
If the battery seems OK, I may keep this for awhile and just deal with the keyboard issue and other missing menu selections.

know8677 said:
After a month or so on a ROM that was working good for me, I got bored and thought I'd flash this over the holidays.
Just finished and got it all set-up. Everything generally seems to be working OK. I'll report back on battery life later.
One issue I noticed right away is that the symbols key next to the spacebar on the keyboard doesn't display the symbols if you long press. I believe that has something to do with the inverted look. I think menu selections for several apps including Chrome are also affected.
Another minor issue (for me) is that I'm not a fan of the search icon being gone from the Play store. Having to choose it from the menu just seems like an extra step.
Finally, I'd love to see more settings options in the notification pulldown. GPS should be there for sure, but I'd also like to see Torch or flashlight as well.
If the battery seems OK, I may keep this for awhile and just deal with the keyboard issue and other missing menu selections.
Click to expand...
Click to collapse
I think all the above will be fixed in next build. A good intendioned commit went awry.
flipped192 said:
Does this have Facebook Contact Sync?
In screenshot the icon looks different.
Thanks.
Click to expand...
Click to collapse
I run it as ab option. It is not included

It definitely looks like it has a lot of potential and I really liked some of the features.
Unfortunately, it wouldn't wake up at some point so I re-flashed my old ROM.
More unfortunately, it looks like since Ad Free was baked in, it now won't let me reinstall Ad Free on another ROM. It must have made some changes somewhere and I get a message that Ad Free can't start because it looks like I have an old version. I uninstall, reinstall and get the same thing. Any ideas on how to fix would be appreciated. I really like using Ad Free.
I'd definitely be interested in trying your ROM again once the wrinkles get ironed out.

know8677 said:
It definitely looks like it has a lot of potential and I really liked some of the features.
Unfortunately, it wouldn't wake up at some point so I re-flashed my old ROM.
More unfortunately, it looks like since Ad Free was baked in, it now won't let me reinstall Ad Free on another ROM. It must have made some changes somewhere and I get a message that Ad Free can't start because it looks like I have an old version. I uninstall, reinstall and get the same thing. Any ideas on how to fix would be appreciated. I really like using Ad Free.
I'd definitely be interested in trying your ROM again once the wrinkles get ironed out.
Click to expand...
Click to collapse
I am including leankernel with newer builds as Zen kernel is was not doing it for me... that should fix the reboot issue
And I do believe ut us an issue with Ad Free and not the ROM though I could be mistaken (all I have is the host file, there is no components). When I delete this host file is has no affect. App was last updated in May, soo hoping it is on their side.

New features or just a kernel swap!??
Sent from my Galaxy Nexus using Tapatalk 2

Gamma
so in the OP in the recommended settings it says gamma 1.2 .... I have a feeling this is not correct... or am I wrong?

DHO said:
I am including leankernel with newer builds as Zen kernel is was not doing it for me... that should fix the reboot issue
And I do believe ut us an issue with Ad Free and not the ROM though I could be mistaken (all I have is the host file, there is no components). When I delete this host file is has no affect. App was last updated in May, soo hoping it is on their side.
Click to expand...
Click to collapse
I was running Ad Free before flashing with no problem, but now when it tries to open it says something about a fatal error and an older version of Ad Free. I doubt it just stopped working on my phone on its own.

Running fantastic. Very smooth. Thanks DHO.
Sent from my Galaxy Nexus using Tapatalk 2

Only thing I found was the phone would not go into airplane mode.
Sent from my Galaxy Nexus using Tapatalk 2

Does this rom restore your apps without tibu?
Sent from my Galaxy Nexus using xda app-developers app

bigbear6708 said:
New features or just a kernel swap!??
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
A couple new features, Quick settings the biggest
idiotzach15 said:
so in the OP in the recommended settings it says gamma 1.2 .... I have a feeling this is not correct... or am I wrong?
Click to expand...
Click to collapse
There are different color measuring schematas. THe one I use (franco's) gamma 1.2 looks very good. BUt everyone's phone is different. My colors are applied on first boot then the script destroys itself, so you can change them after
know8677 said:
I was running Ad Free before flashing with no problem, but now when it tries to open it says something about a fatal error and an older version of Ad Free. I doubt it just stopped working on my phone on its own.
Click to expand...
Click to collapse
I am looking into this. I cannot see what it would not be working. We do include an ad-block host file, but no other components. And removinf the host file has no affect. I am trying to explore this.
donnyp1 said:
Does this rom restore your apps without tibu?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Not currently
asdecker said:
Only thing I found was the phone would not go into airplane mode.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thank for the feedback. Did you do a dirty or clean install?

Is there a way without tibu to auto restore? The reason i ask is that the last rom was fantastic, fast, great battery. I got a good set up now, but alot of extra work to reinstall everything manually. I dont care for tibu. Thanks dude.
Sent from my Galaxy Nexus using xda app-developers app

CyanogenMod 10 & 10.1 by miroslav_mm (New version 23/10/2013)

CyanogenMOD 10 - Android 4.1.2
New build - Final 1.1 - 23.10.2013
Changelog:
Important patches for wi-fi in the kernel, added support for all regions;
Improved the board, cleaned up the kernel, removed the dead code;
Fix proximity sensor;
Fixed critical bug in the audio kernel's driver;
New-stock wpa_supplicant - full work wi-fi and DLNA software;
Added Post Processing - manual adjustment of HUE, SATURATION, INTENSITY, CONTRAST;
Added Content Adaptive Backlight Control;
Added a new widget - Calendar;
Added weather widget Chronus.
Download clean ROM:
http://dfiles.ru/files/ehhvxomjp
Download ROM with Gapps:
http://dfiles.ru/files/g4gvdh0bo
The Most Stable, Fast, Performance and maximum functionality ROM! Without reboots and bsods!
History version:
Build - Final 1.0 - 18.09.2013
Changelog:
Cleaned up the kernel, removed dead code, (more stable)
Trying to fix the proximity sensor; (Fixed reboot, the stability of the sensor is lame)
The system rebuilt; (stable)
Added Qcom proprietary code in SQlite and Dalvik VM; (performance improvement)
Removed item "Restart in fastboot", (an unnecessary feature)
Improved the ported from CM10, 1 application, (visual changes)
Added a couple of widgets to Desklock;
Adreno libs from official 4.1.2, (more fresh)
Added support for 4x MSAA in EGL;
Rebuild audio libs;
Clean ROM, without Gapps and other apps.
and etc.
Download:
http://dfiles.ru/files/q30jwb2mp
Build CM10.0-RC3-PreFinal - 25/07/2013
Features:
- New kernel 3.4: Kernel clean, hopefully without any extra patches, tweaks and OC, only the most necessary;
- New system libraries JB: taken from the official 4.1 for SU640 for better compatibility: camera, sensors, CPU management, and others;
- CAF patches for framework: surfaceflinger, media, etc.;
- CAF Performance for the CPU;
- Rework audio library: improved sound quality and EQ;
- Transferred and adapted to API16 following applications with CM10.1: Apollo, Trebuchet, LatinIME, CMFilemanager;
- Rework DeskClock, new widgets;
- Added cursor to Messages;
- Fix critical Android bug - http://bluebox.com/corporate-blog/bluebox-uncovers-android-master-key/
- Added new dictionaries into the new keyboard;
- New settings: BLX - to change the maximum percentage of the charge, G-sensor calibration, CPU statistics;
- Remove Reboot to fastboot/bootloader from Power menu;
- Fully removed CM-camera, native LG camera does all the work;
- Improved power consumption, reduced voltage display;
- Improved DeepSleep;
- Added applications: BatteryGuru, FileShare, SmartShare;
- Added updated GoogleApps;
- HDMI; (need test)
- USB-OTG. (need test)
Download:
http://dfiles.ru/files/icu19nuv1
CM10-RC2 - Build - 16/04/2013
Changelog:
- Fixed FC when calling the lock screen settings from menu launcher;
- Added to launcher few beautiful wallpapers from Optimus G;
- Added the stock Weather widget from Optimus G;
- New 3 Themes for Launcher;
- Breathing SMS icon;
- Contact's info in SMS;
- Brand new/recent JB Adreno Libs - AU_LINUX_ANDROID_JB_REL_RB4_2.04.01.02.53.007_msm8 960_JB_REL_RB4_2.1 - Build Date: 02/14/13 Thu - Remote Branch: jb_rel_rb4_2.1;
- Rework display libs to support the new Adreno Libs with supporting MetaData;
- Rework MDP kernel driver, almost full port from LG LTE2;
- Gallery can see few new media formats;
- Support for AC3/EC3;
- New SW MP3Decoder;
- New SW AACDecoder;
- Support for HW AAC;
- Support SmartassV2 & Inteligament in Power HAL;
- Improved "deep-sleep" with WiFi-on; (thanks Tdmcode)
- Kernel edits: GPU and CPU;
- Smooth and pleasant interface speed;
- GoogleApps updated;
- RUSS translation for Camera and Launcher.
Download:
http://dfiles.ru/files/2nd8oyxod
CyanogenMOD 10 - Android 4.1.2 - RC1 - 01.04.2013
Kernel:
Kernel 3.0.31 and from my CM10.1 but with many changes:
Little downgrade for compatibility with 4.1.2;
Ported KGSL and VIDC drivers from official JB Samsung kernel fro 8660 devices;
Partially updated MDP and ported driver from JB kernel LG;
Added Snoopy Compression, the same way he is now, it is used in zRAM;
Reduced voltage WiFi module, I think should eat less;
Includes new decrypts and hashes;
+ 7Mb of RAM;
System:
Last CM10;
Rework all display libs; no more random reboots - VSYNC crashing on stock CM10
Added my "Advanced Nitro Settings";
Ported Stock Camera from Optimus G;
Ported Stock Launcher from Optimus G;
New beautiful Weather icons;
GoogleAps built and updated;
Additional Information:
First start Camera and Cameras observed friezes - this is due to the fact that the camera is looking for sensors and features Optimus G which we dont have! Dont do nothing - just waiting until it creates a new configuration and unfriez!
In Launcher Settings Lockscreen give FC - the reason is simple - we do not have that applications from LG Optimus G!
Download you favorite ROM:
http://dfiles.ru/files/v07sudkca
Dont forgot install - minifix-copybit.zip
CyanogenMOD 10 - Android 4.1.2 - RC0 - 19.01.2013
Features:
Kernel updates:
rework O/C CPU, increase frequency;
rework O/C GPU, increase frequency;
change min/max Voltage;
turn on KSM;
turn on zRam;
turn on Qcache;
Added SYNC & SW_SYNC;
Added 4 new Governors;
Added 2 new Schedulers;
a lot of changes and fixes in ramdisk, permissions/services/mount/....
System updates:
HW audio/video decoders DivX/Xvid/H263/H264/Mpeg2/WMV/WMA/ and others;
fix random reboots in Vold;
Native Haptic feedback options;
Native backlight options;
changes in BT and WiFi;
GoogleAps updates and included;
Download: http://depositfiles.com/files/fboy0ntfr
CyanogenMOD 10.1 - Android 4.2.2
New build CM 10.1 - Build - 15/03/2013
Changelog:
- Latest updates from CM;
- Kernel updates;
- C2D composition by default;
- New Power HAL;
- New good scheduler ZEN;
- Smooth interface;
- Emulation 3th framebuffer;
- Fix BT; (my BT-headset working)
- Added support for multiple users;
- Gapps not include;
Bugs: sometimes bugs/artefacts with 1088p recording and playback.
Download:
http://dfiles.ru/files/ihq0nlsve
History version:
First build CM 10.1
Features:
faster then official ROM;
kernel improvements;
zCache;
new mobile scheduler ROW (using on default);
FIX BSOD (no more black-screen after sleep);
fix reboot UI;
newest Adreno libs from Nexus 4 (4.2.2);
newest KGSL driver from kernel 3.4 (Nexus 4);
new device setting - vibrator control; (more exclusive setting later)
GoogleAps updates and included;
I recommend use Launcher like Apex or Nova for smooth work, Trebuchet working not very good.
Download: http://dfiles.eu/files/3m0nn05uw
CM 10.1 - Build - 06/03/2013
Changelog:
- Smooth interface! - not stable, so del ro.hwc.mdpcomp.enable = true from build.prop
- Latest updates from CM;
- New C2D libs;
- Fixes and optimizations in the kernel;
- New exclusive settings:
SDCard cache;
Turn-on/off button backlight;
Fast charging from PC-USB;
Turn-on/off WiFi_FAST;
- WiFi sleep when screen is off;
- Hardware Encoders/Decoders - Audio/Video - exclusive features only on LG Nitro!
- STEREO sound in the camcorder and increased bitrate to 128kb/s
- Gapps built and updated;
bugs:
- Sometimes blue artefacts in the interface, so recommend, open build.prop and delete the line
ro.hwc.mdpcomp.enable = true
and change
debug.composition.type=dyn
on debug.composition.type=c2d
and reboot device. So we turn-on C2D acceleration by latest Qcom libs with c2dGetDriverCapabilities and c2dCreateFenceFD support.
Download:
http://dfiles.eu/files/4xrh0jk8k
Mirrors are forbidden, support the developer!
Main topic:
http://4pda.ru/forum/index.php?showtopic=421655
My Open Source Project:
CM10 - https://github.com/JellyBeanNitro
CM10.1 - https://github.com/CM-Nitro-HD
If you want support me - Donate on WebMoney
Z385011021297
R105928067702
E355930075366
U267621943817

Nice work. Is this compatible for SU640 korean model?

Glad to see another developer coming to the NitroHD. Hope you guys can collaborate to eliminate the common CM10 bugs present in our phones!
Definitely will give your ROM a shot over the next few weeks.
Maybe in another year once i learn more about operating systems I'll be able to contribute too, but currently I haven't got the faintest idea where to start. (Taking Bachelor of Computer Systems Engineering)

downloading to give it a try. i think ill visit 4pda more often like i used to.

Thanks, just installed it, so far so good. Ill report any issues if they come up.

Tried, but unable to enable data connection.
Edit: Reflash the ROM again, and data connection works then.

Re: CyanogenMod 10 (4.1.2) by miroslav_mm
Had a few random reboots so far, but could just be my phone. I have never been able to use any of hono's ROMs as think I have a weak chip in my phone, doesn't seem to like anything except stock speed and voltages.
Sent from my LG-P930 using xda app-developers app

Re: CyanogenMod 10 (4.1.2) by miroslav_mm
miroslav_mm said:
Kernel updates:
rework O/C CPU, increase frequency;
rework O/C GPU, increase frequency;
change min/max Voltage;
turn on KSM;
turn on zRam;
turn on Qcache;
Added SYNC & SW_SYNC;
Added 4 new Governors;
Added 2 new Schedulers;
a lot of changes and fixes in ramdisk? permissions/services/mount/....
Click to expand...
Click to collapse
Where is your kernel source?
---------- Post added at 08:04 AM ---------- Previous post was at 07:59 AM ----------
baviskar said:
Had a few random reboots so far, but could just be my phone. I have never been able to use any of hono's ROMs as think I have a weak chip in my phone, doesn't seem to like anything except stock speed and voltages.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
There are known bugs in the cm10 kernel that cause random reboots. I have fixed some already and I will continue to fix them.
I will be submitting my changes to cm soon. Until then, developers can use my fixes. My source is listed in my rom post.

Battery use based on this morning
Here's what I saw from the ROM after using it this morning:
- one "System UI" FC, nothing major
- sleeps well from clean boot, but once engaging into activities the phone awakes pretty frequently
- battery drain is somewhat heavier than CM10 compared to nighties I tried a couple months ago, stock ICS (20f) is still much better
I'm trying to load some tweaks into it to see if battery drain can be reduced.

Lg p930 rom

Re: CyanogenMod 10 (4.1.2) by miroslav_mm
SFIV HD works on this rom oh yeah!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P930 using xda premium

same battery drain issues. phone is not getting into real deep sleep. also i think notifications are not vibrating if im not mistaken. someone else verify that last one. i did a clean flash, no backups or anything like that. btw, i have to say it is a lot smoother and pretty stable so far even compared to cm9.

Good rom !
Very good rom, OC'ed to 1836 without problems, scored 8150 in Antutu, this baby is fast, not seeing any bugs yet, running it as my usual rom unless something's wrong with it, would love to have intellidemand governor in future releases (very good on battery life without sacrifying performance), just saying i know you are workig hard, good work man !
Battery doesnt seem to drain for me, i put min CPU to 192mhz, will report later if i see anything wrong with the rom.
Keep up the good work man! Best CM10 LG930 rom so far and i tested all of them!:good:

just1nsama said:
would love to have intellidemand governor in future releases
Click to expand...
Click to collapse
ok.
Some body have problem with smartassv2?
my device dont want wake up with it after long sleep (all night). Can some confirm that? Think smartassv2 not adaptive for 2 Cores device. Think need delete it from kernel.

miroslav_mm said:
ok.
Some body have problem with smartassv2?
my device dont want wake up with it after long sleep (all night). Can some confirm that? Think smartassv2 not adaptive for 2 Cores device. Think need delete it from kernel.
Click to expand...
Click to collapse
im using smartassv2 since day 1 and still no BSOD. this is common on cm10 builds although.

How to undervolt?
Hi Miroslav,
Thanks for the nice ROM, i have a query regarding Undervolting.. right now the ROM is smooth and fast, would like to better the battery performance by undervolting,. how do I do it?
Also i tried installng Samsung Touchwiz launcher. for some reason it doesnt work.. but it worked fine before on CM10 and JelyBam ROMs..
Any help is muchj appreciated,
Thanks

All of the CM10 ROMs seem to have the same random reboot issues, here's the ones I experienced:
1.) Random reboots where the phone will just stop responding in the middle of doing something and completely restart.
2.) Issues waking from sleep on occasion (seems to happen after receiving a notification, I'll hear the phone chime then a few minutes later go try and wake it up and it wont wake, the buttons light up but the screen will NOT come on). I have to hold down the power button for ten seconds or so and it will restart.
Also, I don't know if it has anything to do with your ROM but about a day after installing this ROM, I pulled out my SD card and reformatted it on my PC and when I put it back in, the phone constantly kept freezing and restarting. EVEN AFTER I DID FULL WIPE AND FLASHED multiple different ROMs! All would start up and freeze within seconds! I had no choice but to use unbrick method and reroot. I've been playing with ROMs like crazy the past few days, trying to find a stable one, and so far this is the only ROM I've had this issue with. It's also the only ROM I formatted my SD card with, so maybe that's the issue. Just wanted to point it out, it almost had me returning the phone, I thought it was a hardware issue.

screwregi said:
All of the CM10 ROMs seem to have the same random reboot issues, here's the ones I experienced:
1.) Random reboots where the phone will just stop responding in the middle of doing something and completely restart.
2.) Issues waking from sleep on occasion (seems to happen after receiving a notification, I'll hear the phone chime then a few minutes later go try and wake it up and it wont wake, the buttons light up but the screen will NOT come on). I have to hold down the power button for ten seconds or so and it will restart.
Also, I don't know if it has anything to do with your ROM but about a day after installing this ROM, I pulled out my SD card and reformatted it on my PC and when I put it back in, the phone constantly kept freezing and restarting. EVEN AFTER I DID FULL WIPE AND FLASHED multiple different ROMs! All would start up and freeze within seconds! I had no choice but to use unbrick method and reroot. I've been playing with ROMs like crazy the past few days, trying to find a stable one, and so far this is the only ROM I've had this issue with. It's also the only ROM I formatted my SD card with, so maybe that's the issue. Just wanted to point it out, it almost had me returning the phone, I thought it was a hardware issue.
Click to expand...
Click to collapse
Thats weird, not having those reboot issues with any of the CM10 roms i used for the LG930 so far and i tried them all ... maybe something wrong with the hardware of your phone ?

Re: CyanogenMod 10 (4.1.2) by miroslav_mm
screwregi said:
All of the CM10 ROMs seem to have the same random reboot issues.
Click to expand...
Click to collapse
Help me find and fix them so we can have a, stable cm10. I have already fixed several kernel bugs.
http://forum.xda-developers.com/showthread.php?p=37059802

tdmcode said:
Help me find and fix them so we can have a, stable cm10. I have already fixed several kernel bugs.
http://forum.xda-developers.com/showthread.php?p=37059802
Click to expand...
Click to collapse
I'm going to try your ROM later tonight. I will report back the logs if it has any reboots. It's nice to see there's people working on it.

[ROM] [4.4.2] [d2lte] [OFFICIAL] LiquidSmooth v3.0 Beta

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
CPA Poke
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth/android_kernel_samsung_d2"]Deathly Kernel Source[/URL]
Code:
[url="http://goo.gl/azhHsk"]Main Thread (Download links and explanation)[/URL]
Please Support Liquid by Donating HERE

Deathly Kernel (Built in!)
*Deathly 1.3 Features*
Updated frequently from kernel.org and CM
CPU Related
CPU Voltage Control
CPU OC/UC
MSM_SLEEPER mod (max screen off frequency)
Will force the cpu cores to be set at 486Mhz to make battery life better.
Fast Charge
CPU Governor's:
Performance
PowerSave
UserSpace
Ondemand
OndemandX
Conservative
Lulzactive
Interactive
InteractiveX
LionHeart
Smartass2
Adaptive
Hyper
Intellidemand
Abyssplug
AbyssplugV2
Smartass
SmartassH3
Wheatley
BadAss
DanceDance
Intelliactive
SmartMax
Nightmare
AssWax
GPU Related
GPU Voltage Control
GPU OC (480Mhz, and 500Mhz steps)
GPU Governor:
Simple
TCP Congestion Control (Info http://goo.gl/GJ73jf )
Veno Set as default instead of cubic
The following were added
Advanced
BIC
HYBLA
HSTCP
ILLINOIS
LP
SCALABLE
VEGAS
RENO
VENO
YEAH
IO's
deadline
row
cfq
bfq (Default)
noop
sio
vr
zen
fifo
fiops
tripndroid
Dynamic F-Sync
This is a goodie by faux123, so all credits go to him for creating this unique feature !
Many kernels just disable synchronous writes to file to speed up system. While this works neatly, it is also dangerous as processes believe that file writes are actually synced to disk (or mmc media in our case) while this is not yet true ! The gain is a noticeably smoother user experience, but the risk of doing so is to have a corrupted filesystem if the device crashes, user pulls battery, battery fully depletes ... so that the device is turned off unexpectedly. To allow for the benefit, but to minimize the risk, faux123 created dynamic fsync, which while the screen is on, will defer file sync temporarily, but when screen gets turned off, a flush is called to synchronize all outstanding writes keeping your data safe.
SLIMBus OverClocked
This means SLIMbus will use its maximum potential to give the best audio quality for the hardware. Takes advantage of both hardware and the mods from zeroinfinity, also opening the door for more things that were previously limited by this. Researched and experimented by ZeroInfinity and Poondog

Is this KitKat? Havent used this rom (older version) Since last year when I first got my GS3 but the lack of updates so that's why I was wondering I loved this rom because of the many customizations .
edit: Yes it is, sweet.. And you offer nightlies now, flashing! :]

Download complete.... Now flash for test...
Cyanogenmod 4.4.2 (sgh-t999l) kt747

Flashed the 3rd beta version and have a strange issue when hitting the home key - instead of taking me to my launcher home (Apex), it brings up the list of recent apps. And I'm not pressing down on the home key that long - just the regular press seems to cause it to happen.

I do a clean flash... Change the kernel to overclock,install all my app and for now...no issue.....really smooth and fast....is a found any issue a report to the forum
Cyanogenmod 4.4.2 (sgh-t999l) kt747

[/COLOR]First issue: when a charge the phone the battery circle in the status bar disappear and the phone lock and restart....
Liquid-Smooth 4.4.2 (sgh-t999l) kt747
---------- Post added at 12:19 AM ---------- Previous post was at 12:12 AM ----------
When charge the phone lock and sometimes reboot
Liquid-Smooth 4.4.2 (sgh-t999l) kt747

Pretty darn smooth over here, love it, thanks, this had so many options it's ridiculous, only thing missing is multi
Window lol
Sent from my SGH-T999 using Tapatalk

pretty good so far, didn't notice anything to serious just that:
Proximity sensor lights up when on lockscreen until you turn screen off. Stays on when screen turns itself off on lock screen.
sound from ear speaker lags for a sec when ending call.
the notification drop down would lag when there's a lot of notifications.
lockscreen wallpaper turns black when u disable see through option until I reboot. Might also be a bug, but is blur lockscreen suppose to be the same like in PA? It doesn't look it it.
Status bar would sometimes flicker black transitioning from translucent when entering an app.
Also, this just occurred to me once, downloading and installing apps stalled until I reboot.
And lastly, the loading circle spins crazily.
The Kitkat version is still on beta. It doesnt yet have the features I miss from 2.37 such as changing the color of status bar, battery bar, power widget in notification w/ brightness control, the iOS emoji, and a few others.
Some things I dislike about kitkat:
Those orange accents for data and wifi when connecting Google services.
The phone and contacts app: all the white hurts my eyes..
Some things I dislike about liquidsmooth:
The bootanimation: a simpler one needs to be made..
Sent from my SGH-T999 using Tapatalk

culson_35 said:
[/COLOR]First issue: when a charge the phone the battery circle in the status bar disappear and the phone lock and restart....
Liquid-Smooth 4.4.2 (sgh-t999l) kt747
---------- Post added at 12:19 AM ---------- Previous post was at 12:12 AM ----------
When charge the phone lock and sometimes reboot
Liquid-Smooth 4.4.2 (sgh-t999l) kt747
Click to expand...
Click to collapse
You need to disable charging animation, it is disabled by default for now.
ayeitschris said:
pretty good so far, didn't notice anything to serious just that:
Proximity sensor lights up when on lockscreen until you turn screen off. Stays on when screen turns itself off on lock screen.
the notification drop down would lag when there's a lot of notifications.
lockscreen wallpaper turns black when u disable see through option until I reboot. Might also be a bug, but is blur lockscreen suppose to be the same like in PA? It doesn't look it it.
Status bar would sometimes flicker black transitioning from translucent when entering an app.
Also, this just occurred to me once, downloading and installing apps stalled until I reboot.
And lastly, the loading circle spins crazily.
The Kitkat version is still on beta. It doesnt yet have the features I miss from 2.37 such as changing the color of status bar, battery bar, power widget in notification w/ brightness control, the iOS emoji, and a few others.
Some things I dislike about kitkat:
Those orange accents for data and wifi when connecting Google services.
The phone and contacts app: all the white hurts my eyes..
Some things I dislike about liquidsmooth:
The bootanimation: a simpler one needs to be made..
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Proximity sensor is on because pocket mode is on for lockscreen notifications.
Loading circle issue is a old bug still looking into it
power widget in notification w/ brightness control will never return we will be adding cm's implemtation of it
Orange Accents our a kitkat thing we wont be messing with it
Phone and contacts you can enable trds (Dark Liquid) and they will be dark
If you do not like the boot animation flash a different one
I will look into the notification drop down lag and the lockscreen wallpaper going away.

Couldnt get the d2lte to flash on full wipe with TWRP 2.6.3.0
Sent from my SGH-T999 using XDA Premium 4 mobile app

wyldkard said:
Couldnt get the d2lte to flash on full wipe with TWRP 2.6.3.0
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Look at the FAQ on the main thread it will tell you how to do it.

deadman96385 said:
Look at the FAQ on the main thread it will tell you how to do it.
Click to expand...
Click to collapse
Tried that with failed results. I actually had to roll back to 2.6.3.0 from 2.6.3.1 because LS 3.0 nightlies would fail on the newest TWRP.
Given that its a LS issue, is it being looked at to be fix in the next release?

I had done a dirty flag of this rom over last Gummy nightly and the only issue I had was Bluetooth connectivity, it would not stay connected.
So I made wiped, wiped, wiped and wiped some more, installed rom and gaps again. Without installing anything else first thing I did was test Bluetooth again and it will not stay connected. Other than that everything was working great for me. Thanks
Sent from my unknown using Tapatalk

mexicandroid said:
I had done a dirty flag of this rom over last Gummy nightly and the only issue I had was Bluetooth connectivity, it would not stay connected.
So I made wiped, wiped, wiped and wiped some more, installed rom and gaps again. Without installing anything else first thing I did was test Bluetooth again and it will not stay connected. Other than that everything was working great for me. Thanks
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
what recovery version are you using?

Deleting or adding widgets
Something I did that now I can add or delete widgets.... any clue? Everything else this is a smoothie!

wyldkard said:
what recovery version are you using?
Click to expand...
Click to collapse
I'm using TWRP v2.6.3.1, but I must say Bluetooth has a been a little weird in all 4.4.x rooms I have tried but for some reason this version it will not stay connected. It will connect for a few seconds and then disconnect. I have to reboot the phone for it to even connect for a few seconds. I even tried installing another kernel since I listen to music throughout the day through my Bluetooth
Sent from my unknown using Tapatalk

Fixed
trr4luvpr said:
Something I did that now I can add or delete widgets.... any clue? Everything else this is a smoothie!
Click to expand...
Click to collapse
Got it!! thanks anyway

mexicandroid said:
I'm using TWRP v2.6.3.1, but I must say Bluetooth has a been a little weird in all 4.4.x rooms I have tried but for some reason this version it will not stay connected. It will connect for a few seconds and then disconnect. I have to reboot the phone for it to even connect for a few seconds. I even tried installing another kernel since I listen to music throughout the day through my Bluetooth
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
I have merged a bluetooth fix, the next build will have it, next build will be up sometime today.

deadman96385 said:
I have merged a bluetooth fix, the next build will have it, next build will be up sometime today.
Click to expand...
Click to collapse
Awesome....i can't wait....last night i flash the ROM but I go back....the reason is for the issue when connect to charge the battery...but this ROM have the feature a need....:thumbup:
Beanstalk 4.4.2 (sgh-t999l) kt747

[BHB27 Kernel MOD] IntelliProfiles 8.0 [CM-RR-MOKEE-STOCK]

I started a project to myself use and shared this with some users in the brazilian Moto Maxx community. This project is based on doing profiles for BHB27 Kernel for our device: Quark.
These profiles are based on tests and new changes are tested before released.
These profiles are hardly tested by me and the beta testers. When released for beta testers the focus is to see if there are improvements between the tested version and the latest version available, find the best configuration for each usage profile and, for sure, search for bugs (as lags, microlags, battery drain, etc). After that tests I release it to Xda and keep searching for bugs for all the users.
I'M DEFINITELY NOT A DEVELOPER!
ALL I KNOW I DID READ A LOT TO MAKE THESE TWEAKS AND CHANGES (I 'STUDIED' EACH TWEAK IN ZZMOVE, FOR EXAMPLE).
THIS DOES NOT UNDERVOLT YOUR DEVICE OR ENABLE WAKE CONTROLS. ACTIVE WAKE CONTROLS OR UNDERVOLT YOUR DEVICE BY YOUR OWN RISK.
- Intelligent Tasker profiles (Temporarily removed)
- Intelligent notifications based on circumstances (Temporarily removed)
- Kernel adiutor profiles constantly updated
- Profiles based on users needs
- Multi profile
- Better battery life on stand-by and usage time
- Better configuration for daily usage
- Better performance for gaming
- No overheat in daily usage
- Screen balance (fix the yellow screen bug on quark)
- Low memory killer tweaked
- Virtual memory tweaked
AVAILABLE PROFILES
Daily Profile: The best balance possible between battery and performance. Reduce frequencies as fastest as possible, deactivate unnecessary cores the fastest possible, only go for high frequencies (above 1497) only if really needed, extremely good cores management to prevent battery drain and overheat.
PowerSave Profile: Maximum optimization for battery. CPU/GPU underclocked, CPU limited to 2 cores, a lot of optimizations for the best battery possible without much smoothness sacrifice.
Gaming Profile: Maximum optimization for games. CPU/GPU tunes and optimizations for a better gaming experience.
***YOUR BATTERY MAY DRAIN FASTER.
***YOUR PHONE MAY OVERHEAT.
I'm so happy to introduce IntelliProfiles, an integration from Tasker and ProfilesMod. This are Tasker profiles based on circumstances which change kernel adiutor profiles, change system configuration and much other actions.
**Every change made will be asked if the user would like to do so by a notification. Nothing will be done automatically.**
Every profiles were hardly tested by 20 users and all the profiles are correctly working.
RecommendationsFor daily usage the recommended is daily profile. Other profiles may decrease the battery faster because they stay at high frequencies for longer times.
Don't change anything in the profiles, so you may find bugs and help me developing and fixing it.
Try to run every game with daily profile, if it do lag then you try the Gaming. Gaming keeps all cores and GPU at maxed frequency and may heat and decrease battery really fast.
Always have the up-to-date IntelliProfiles mod. It's really important to be updated and have the newest version.
Report any bug, so I can fix it the fastest possible. Do not hesitate to report any bug or problem you have with the mod.
REQUIREMENTS
Custom Recovery (TWRP recommended)
BHB27 Kernel
The latest BHB Kernel Adiutor
Kernel and Kernel Adiutor may be found at: http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
INSTALLATIONEXTRACT THE FILE, COPY TO EMULATED/0/KA_PROFILES AND APPLY THE PROFILE IN KERNEL ADIUTOR APP.
OPTINAL --- Add Kernel Adiutor widget to your homescreen for an easy profile switch.
DONE!
TO DO LIST (LISTED BY PRIORITY)
• Nothing at To Do List at this moment. You may request me right here or at Telegram @Debuffer)
All under progress since it will take a while to everything work like it should.
"TO DO LIST" priority order may suffer changes based on the user's reports, user's requests faster and/or success rate in profile tests.
This list is variable and may be changed anytime.
All profiles will be hardly tested before being released.
None profile will be released if it presents bugs or instability.
PROFILES SUGGESTIONS ARE ALWAYS WELCOME! I'M SO EXCITED TO DO IT SO YOU CAN ASK FOR ANY PROFILE AND I WILL DO MY BEST TO DO IT.
MORE BETA TESTERS ARE ACTUALLY NEEDED
ACTUALLY IT'S ME AND TWO FRIENDS TESTING IT ONLY ON XT1225 QUARK
NEED TESTERS FOR XT1250
IF YOU ARE AVAILABLE AND WOULD LIKE TO TEST YOU CAN POST HERE OR CALL ME ON Telegram: @Debuffer
CREDITS
@baybutcher27 for this awesome kernel and for the slogan image
@Paget96 for teaching me a lot of things related to kernel and for features image
@hpbrasil for teaching me a lot of things related to kernel
@xdadevelopers for bringing us this awesome website where I could learn a lot of stuffs
ALL THE KERNEL CREDITS GOES FOR @baybutcher27

All the old changelogs were and will be deleted. The changelog you may track is only the newest one to avoid too many spoilers in the thread and in the post. If you do like to track the changes being made you can do it in this website: https://trello.com/b/LVa4pRQP/profilesmod
CHANGELOG
30/09/2016Changed CPU governor for the most optimized combination with Govtuner
Configured all new kernel features for the best optimizations
Changed read-ahead value
Changed I/O scheduler for a more responsive one
Enabled double tap to wake
Improved temperature control
Improved GPU tweaks
INSTALLATION --> EXTRACT THE FILE, COPY TO EMULATED/0/KA_PROFILES AND APPLY THE PROFILE IN KERNEL ADIUTOR APP.
12/07/2016Changed I/O scheduler for a more responsive one
Changed read-ahead value
Tweaked virtual memory
Some improvements in CPU
READ CAREFULLY:
Now IntelliProfiles doesn't support any Governor Tunables. What does it means? It means that it will not have custom CPU governor tunables. Instead of it, the users should use GovTuner, my other project which fits perfect with IntelliProfiles.
Users should use both together to have the best experience with our Moto Maxx/Droid Turbo.
The link for GovTuner: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
27/06/2016
IntelliProfiles 6.0 released.
New installation method. Please, check Installation tab to learn the new method. Titanium Backup isn't needed anymore.
Updated Kernel Adiutor to Kernel Adiutor by Baybutcher +12 version.
Tasker is not back yet. Please, vote the pool if it's better with or without Tasker.
New read-ahead value for Daily and PowerSave profiles. This new value might slightly increase the battery.
A lot of optimizations in Daily profile. It's now more smooth and doesn't drain so much battery as the last used to.
Improvements in I/O Scheduler for Gaming Profile.
#2
Installation bug fixed.

Good idea, but maybe it will be better to focus on less complex range of profiles, such as performance/balanced/battery saving? IMO that way it will be easier for everyone to choose the favorite preset.
P.S. Isn't there a built-in utility to create profiles in KA?

Andrey G. said:
Good idea, but maybe it will be better to focus on less complex range of profiles, such as performance/balanced/battery saving? IMO that way it will be easier for everyone to choose the favorite preset.
P.S. Isn't there a built-in utility to create profiles in KA?
Click to expand...
Click to collapse
In future I might do an easier and a more complex range of profiles, in two separated zips. Is that a good idea?
Suggestions are always welcome. Thanks for yours, @Andrey G.

Tomorrow we gonna have a huge update for all the profiles. Stay tuned!

I'm testing this out on my Droid Turbo with CM13. Can I have Lspeed installed too?

Lamarrotems said:
I'm testing this out on my Droid Turbo with CM13. Can I have Lspeed installed too?
Click to expand...
Click to collapse
Yes.
By the way, it's highly recommended. LSpeed is the best mod you'll find over Xda and other forums and it will improve even more if you use both mods together.
Sent by me using my fingers

thanks! Should I turn off the kernel options/settings in Lspeed? I guess I don't even truly understand what it does or how it works!

I recommend to don't use kernel tweaks on lspeed since bhb is a custom kernel, but any other tweaks you might give a try. @Paget96 is my close friend and he helped me to create some tweaks for ProfilesMod
Sent by me using my fingers

Titanium backu didn't restore any data automatically after install, so I can't find any profile on the widget.

mirdones said:
Titanium backu didn't restore any data automatically after install, so I can't find any profile on the widget.
Click to expand...
Click to collapse
After the flash you gotta wait for the automatic reboot and titanium will restore the profiles.

Debuffer said:
After the flash you gotta wait for the automatic reboot and titanium will restore the profiles.
Click to expand...
Click to collapse
That is the problem.
The phone automatically reboots after the flash, but Titanium does not restore anything automacally, even after a 20 minutes wait without touching the phone.
I am a pro user of Titanium and it already have its own folder of backups.
Maybe it has something to do with it.

mirdones said:
That is the problem.
The phone automatically reboots after the flash, but Titanium does not restore anything automacally, even after a 20 minutes wait without touching the phone.
I am a pro user of Titanium and it already have its own folder of backups.
Maybe it has something to do with it.
Click to expand...
Click to collapse
That's weird.
Try cleaning titanium backup data and reflashing the mod. If does not work, let me know and I'll look for a solution.
Sent by me using my fingers

Debuffer said:
That's weird.
Try cleaning titanium backup data and reflashing the mod. If does not work, let me know and I'll look for a solution.
Sent by me using my fingers
Click to expand...
Click to collapse
I cleaned my titanium folder and it still did not restore anything.
By the way, I have kernel auditor already configured for wake controls.

Clean kernel adiutor data.
Sent by me using my fingers

Debuffer said:
Clean kernel adiutor data.
Sent by me using my fingers
Click to expand...
Click to collapse
It also didn't work.

mirdones said:
It also didn't work.
Click to expand...
Click to collapse
Call me on telegram: @Debuffer
I'll send you the backup files and you just restore in titanium backup.
Sent by me using my fingers

I'll start to work on a new project.
It will use ProfilesMod and Tasker together to optimize the phone based on some circumstances.
More details will be revealed soon.
Sent by me using my fingers

A huge update is coming out tomorrow.
Stay tuned with the news!
Sent by me using my fingers

Installed 1.7 restoring data and app manually on titanium an it worked.
Restoring automatically did not work again.

[Oct 31] [Machinex][MarkOneHundred][KERNEL][TW][5.0.1][I9505]

Machinex
MarkOneHundred
Sheer will .
This is machinex.
This is machinex. I have been working on this kernel for over a year now, and am finally comfortable with its release to the public. This kernel builds on the great work of those who have made this device the powerhouse that it is. There are elements here that you have experienced on every GS4 kernel to date, as well as other devices.
The goal I had for this project was upstreaming/updating/experimentally upgrading as much as I possibly could. I have done so, and will continue to do so.
This kernel is ONLY for TW-based, 5.0.1 roms for the I9505!!! NO I WILL NOT DEVELOP FOR DEVICES I DO NOT OWN, SAVE YOUR BREATH!
OBLIGATORY DISCLAIMER:
THIS KERNEL COULD VERY WELL DESTROY YOUR PHONE, YOUR LIFE, YOUR MARRIAGE, Etc. YOU INSTALL AT YOUR OWN RISK!! XDA AND I ACCEPT NO LIABILITY FOR YOUR DECISION TO USE THIS KERNEL!!For noobs: assume that installing this kernel will cause your phone to grow arms and punch you in the face.
PLEASE READ AND UNDERSTAND THIS OP BEFORE LEAVING USELESS "IT DOESN'T WORK" COMMENTS!
Issues that aren't answered here will be dealt with on a case-by-case basis.
SEE POST #2 FOR UPDATES, CHANGELOGS, and FIXES
SEE POST #3 FOR BATTERY/PERFORMANCE INFO
SEE POST #4 FOR A SHORT SYNAPSE BRIEFING
LOGS OR IT DIDN'T HAPPEN! Context helps too. What were your Synapse Settings?
KNOWN ISSUES Wifi issue is fixed! After a fresh rom install, all you need to do is reboot and the appropriate files are created in /data enjoy! HOTSPOT IS FIXED!!!! Finally! I AM AWARE OF AND WORKING ON LOCKSCREEN PIN BUGS!!
FEATURES:
- Linux 3.4.113 + a LOT of upstreamed subsystem code.
- Automatic Busybox Installation, Version 1.25.1.
- Cpufreq core backported ENTIRELY from mainline 4.13. All Cores operate independantly. Their governors and tunables can all be different.
- Govorners: Due to a highly upstreamed cpufreq core api, not many custom governors for now except for Interactive, Intelliactive, and the *NEW* Schedutil governor, described in the documentation like so:
The "schedutil" governor aims at better integration with the Linux
kernel scheduler. Load estimation is achieved through the scheduler's
Per-Entity Load Tracking (PELT) mechanism, which also provides
information about the recent load [1]. This governor currently does
load based DVFS only for tasks managed by CFS. RT and DL scheduler tasks
are always run at the highest frequency. Unlike all the other
governors, the code is located under the kernel/sched/ directory.
Sysfs files:
* rate_limit_us:
This contains a value in microseconds. The governor waits for
rate_limit_us time before reevaluating the load again, after it has
evaluated the load once.
For a great, comprehensive blog regarding the specifics of each governor, as well as the settings found below, please check out the link I've referenced in post #3.
- HARDLIMIT and THERMAL: Incorporated Yank555's CPU Limiting solution, Hardlimit. ALL hardlimits, cpu boost limits, and thermal limits are now PER CORE. I have included it directly in the core cpufreq code, and it is the primary controller for THERMAL, INPUT BOOST and user controlled hardlimits. Thermal overrides both user-selected and input-boost limits, and you can monitor the limiting in real time. Also, the thermal driver now accounts for each core's temperature, and saves time/lock-contention by skipping core control if the temps are below the frequency limiting value.
-CPU HARDPLUG: A driver I built that hooks into the main cpu hotplug API and allows you to disable any core you want, configurable for screen on/off.
- Hotplugs: MX Hotplug, personally built from scratch and uses a real-time kthread for its calculation work. Intelliplug 15.8 (Personally Updated), Alucard Hotplug, MSM_sleeper, Lazyplug, Blu Plug, and Bricked hotplug.
Hotplug Notes: I changed the names of certain functions in the Alucard and MSM Sleeper hotplugs, so that their tunables could be streamlined in Synapse. Synapse is cleaner and simpler than ever, but if you use a third party app, Alucard and MSM Sleeper's max cores and max cores during suspend settings will not be tunable. So anyone who uses a third party app with this kernel let me know and I'll devise a workaround. Mpdecision removed entirely. The "mpdecision" in our sysfs is actually bricked hotplug.
-GPU:Machinactive, Interactive, Conservative, Ondemand, Performance and Powersave GPU Governors, GPU touchboost (fixed suspend issue), ability to lock the min/max freqs, and more!
-Updated version of fauxsound (5.4) (flar2, alesaiko, me). I limited the options in the code to the 4 controls that actually work for our device, and you'll notice a significant stability improvement. Slimbus:Golden-ratio-based operation is pristine. Sound quality is hardware-perfected. The version number is largely arbitrary and I increment when I make any significant improvements. NO MORE USERSPACE CALCULATIONS NEEDED!!!
-A gamot of colour, brightness, and panel options that I frankly didn't think would be feasible for our device, but it's working! MDNIE HIJACK selection, KCAL, and Cyanogen's generic PCC colour control are implemented in Synapse. Note that MDNIE/KCAL stuff is a battery thief, and I've not tested PCC colour control enough for power consumption to give you a definitive statement on it. Note: PCC values are from 1000 (safety limit) to 32768 (or a number close to that), meaning your tuning control is as FINELY GRAINED as possible for this device. I can't believe Synapse actually supports its ridiculous number of steps (and well, I might add). Faux's generic "colour control presets' are in there and they actually work! The stock colours much more vivid, and lower brightness settings benefit from them as I have modified top brightness to my liking.
-HBM:Qualcomm High Brightness Mode: unlocked! This can be controlled via a checkbox in Synapse, but you can also use flar2's HBM widget from the play store. I tried it before and HBM would flicker, but i pulled off a VERY hacky way of making it userspace controllable. Be careful! Though it doesn't seem to drain the battery or overheat the device, it's purely experimental and could cause Chuck Norris to come to your house and personally smash your phone. Now SEPARATE from autobrightness! "SCREEN FLICKER FIX" on PAGE 2
- Completely upstreamed and overhauled cpu, power, scheduling...you name it. Updated Powersuspend to the point where I had to rename it, because it is now closely integrated with the core suspend/power api. Introducing: Prometheus. The driver now calls suspend directly when you turn the screen off, unless a) music is playing, b) the phone is plugged in or c) you choose to disable the feature.
-All the TCPIP tweaks etc, updates to random/frandom, android-specific autogrouping, limited but significant LMK/OOM updates.
-BACKPORTED "codel" fair-queueing net-scheduler, for a faster/more consistent networking experience.
-persistent ram, kexec-support, fast-charge, etc. Drop Caches button in Synapse is useful.
-Utilizing Qualcomm's built-in QRNGD (qualcomm random number generator daemon) with randomness optimized in the kernel = entropy for days.
-BOOTLOADER: Officially only 5.0.1 Bootloaders are supported. Unofficially, someone tried it with a KK bootloader and it worked fine for him so what do I know?
-COMPLETE Synapse support. Download, update, AND install Busybox On Rails from the PlayStore before you install the kernel for best compatibility and support. UPDATE: FULL Busybox installation is now included in machinex installer script. If you have any issues, still feel free to install Busybox on Rails. Upon kernel installation, you'll find Synapse installed in your system apps. If you want to get rid of it, just remove it from /system/priv-app with your file manager.
-CPU and GPU VOLTAGE Control: Both in Synapse. I DO NOT SUPPORT ISSUES IF YOU CHANGE VOLTAGE. YOU ARE ON YOUR OWN.
MENTIONS:
To those listed here, I cannot express how grateful I am for your assistence, patience, and kindness towards me as I badgered you throughout my journey. Though saying "thank you" doesn't feel like enough, thank you all. If I missed someone here, please tell me.
Thankyou:
friedrich420
Slim80
Tkkg1994
flar2
osm0sis
alesaiko
HybridMax
Kushan
Alucard24
Ausdim
Ktoonsez
neobuddy89
javelinanddart
Andreilux
theHacker911
UpInTheAir
Pafcholini
Placiano
Dorimanx
faux123 (seriously like the godfather of s4 kernel hax)
jcadduono
FransiscoFranco
Cyanogen
Meticulus
Eliminator74
Matthew-333 (moonshine kernel)
klabit87
apbaxel
yank555
ion-storm
yseras
PDesireAudio
lsswizard
arter97
Grarek
mrg666
showp1984
gsstudios
Lord Boeffla (andip)
Chainfire
TeamTrickster
tommygreenus
Andycar (For being the best bloody coding buddy I could ask for)
The Machinex Testing Team! - AMAZING folks, just amazing.
My Awesome Testers from this thread.
Again, I'm sure there's tons more.
On to the fun part then
INSTALLATION INSTRUCTIONS:More importantly, the uninstallation instructions. The install pretty much takes care of itself.
There are two links below that you must download in order to safely have an install/uninstall solution for this kernel. The one labelled "machinex-MarkOneHundred.zip" is the kernel. UPDATE: Busybox On Rails isn't required anymore. The second zip is crucial for uninstalling, aptly named "machinex-uninstaller-Jan12.zip." When this kernel is installed (and everytime it boots), it will rename mpdecision, thermald, thermal-engine, and power.default.so with an appended "-bak" suffix, because they all interfere with the updated power/cpu code in the kernel. If you switch to a different kernel, I INSIST that you flash the uninstaller (or take a look at the scripts yourself and do the stuff manually). ATTENTION: SLIM80'S KERNEL CLEANING SCRIPT IS NO LONGER NECESSARY WHEN FLASHING THIS KERNEL!!!!!! I HAVE INTEGRATED MY OWN CLEANUP PROCESS IN THE INSTALLER!!!!!!!!!!
TLDR: NO NEED FOR BUSYBOX ON RAILS, flash zip. use uninstaller zip to uninstall.
DOWNLOADS:
!!!JANUARY 12, 2017:UPDATE!! NEW UNINSTALLER for EVERY VERSION!!!!
DO NOT MIRROR THESE ELSEWHERE. DO NOT INCLUDE THEM IN YOUR ROM WITHOUT ASKING MY PERMISSION FIRST. I AM HAPPY TO COLLABORATE, NOT TO BE ON THE RECEIVING END OF BUG REPORTS CAUSED BY THIRD PARTY DOWNLOADERS.
UNINSTALLER-JAN12: https://www.androidfilehost.com/?fid=385035244224412313
md5: 295ac70bbb17ad2e5dc59e4ca1288e79
MarkOneHundred
INSTALLER: https://www.androidfilehost.com/?fid=745849072291685412
md5: 03af9cfc399d3eda3141254291668563
SOURCE: https://www.github.com/robcore/machinex
(be gentle on my ridiculous commit history, my git skills are shoddy at best).
So keep in mind this a development thread, blah blah blah, but if we all have good discussions (let's TRY to keep it on topic), I'm more than happy to have some fellow nerd friends to talk about my passion with. Heck, I want to use this thread as a chance to meet some other developers who wanna work on stuff together, exchange ideas, learn, and teach me how to get better at git.
Enjoy!
XDA:DevDB Information
Machinex, Kernel for the Samsung Galaxy S4
Contributors
robcore
Source Code: https://www.github.com/robcore/machinex
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: MarkOneHundred
Stable Release Date: 2017-10-31
Created 2016-09-05
Last Updated 2017-10-31

Reserved
UPDATES NOTICE:
Reset your fuelguage (in Synapse) after every install! WIping your cache and dalvik-cache can be helpful for stubborn apps, as well as wiping the cache of any specific app giving you trouble!
-------------------------------------------------------------------------
UPDATES - MarkOneHundred - October 31, 2017
CHANGELOG:
- Updated memory management to roughly linux 4.4.
- Modified Cpufreq in various ways. Per-Cpu frequency touchboost, per-cpu thermal core tracking and limiting, and governors can now be changed if a cpu core is offline. The governor selected will be applied to the core once it comes back online.
- Implemented Omniboost, a generic touchboost interface that can be used for any driver, so long as driver has an external function that the booster can use.
- Built a new hotplug driver from scratch, mx_hotplug. The driver chooses to on/offline cores based on a combination of system load and current number of scheduler requests (and touch of course). What separates this hotplug driver from others is that it uses a real-time kthread in order to give it an "interactive" type calculation.
- Speaking of which, found and fixed the issues with google's most recent interactive governor, and have added it back. Due to it working perfectly now, I forward-ported Intelliactive as well.
- Updated Hardplug to be more efficient.
- Built a little userspace hotplug driver from scratch for those who just need manual core adjustments.
- Tons of other little fixes and updates, to the kernel itself and to Synapse. Please explore around Synapse for some of the updated features.
- Found and fixed any of the user reported bugs i could.
- Continued with the various core updates to 4.14.
- Updated to my own toolchain, 7.1.1 hardfloat, cortex-A15 optimized (it is similiar enough to krait to give us an edge).
- I will update this if i think of anything else.
Sticky: Kernel base is now pretty much somewhere between 3.16-3.18, however I will keep the versioning at 3.4 for certain functions that depend on kernel_version conditionals. Wifi hotspot disconnect issue still persists, but i'd like to think that one day it will be solved...
Can be found in MachineX Rom by the awesome @Andycar found here: https://forum.xda-developers.com/ga...m-machinex-debloated-nogapps-s6-apps-t3573009
See my poorly formatted wiki for older updates:
https://github.com/robcore/machinex/wiki
-----------------------------------------------------------------------
LOGS
In Synapse, under 'LOGS AND PROFILES,' you will find a button that says ALL LOGS. Please press this button IMMEDIATELY after a bug appears that you would like to report, or after a boot if you get a kernel panic (RR).
From now on, without these logs present, I am no longer able to respond to the issues brought up by users.
FIXES
The following fixes involve sqlite and the "Setting Storage" application, also known as Settings Provider, or "com.android.providers.settings package" You will be working with a file named settings.db, and the 'system' table within.
Synapse Cancelled Fix: Get rid of the init.d scripts that are conflicting with UCI service startup. Also check the SuperSU section below...
Sound Fix: Either don't use an audio mod, or don't use Faux Sound Engine. That's all she wrote.
ScreenFlickerFix: Using an SQLITE DB Editor of your choice (from playstore), navigate to the "system" table and change values for "dim_screen" and "intelligent_screen_mode" to 0. *UPDATE* NOW AVAILABLE IN SYNAPSE UNDER THE "EXTRAS TAB"
ChargingTweak: Same as above but change "adaptive_fast_charging" to 0. This is only IF you are having issues which kernel driver-level fast charge. *UPDATE* NOW AVAILABLE IN SYNAPSE UNDER THE "EXTRAS TAB"
MASSIVE THANKYOU to @Andycar for making the above two fixes possible via Synapse!
SuperSU: I'm seeing a lot of permisison errors. Make sure, when using custom roms and kernels, that SuperSU is set to be as permissive as possible so you don't get knox blocked. Here are the crucial settings:
- ENABLE SU during boot
- DISABLE (untick) Mount namespaces separation
- Install SuperSU into /system
- ENABLE Trust System User
- Though I know many have security issues with the idea of allowing apps by default, doing so will make your experience way faster and provide you with less interuptions. At the very least I would set allow by default for Synapse.
These SU settings are kinda par for the course when it comes to android modding.
build.prop: Here is a list of property removals/changes recommended for our device:
REMOVE(lines containing):
ANYTHING with "fps/FPS" in it.
persist.sys.NV_FPSLIMIT
persist.sys.NV_POWERMODE
persist.sys.NV_PROFVER
persist.sys.NV_STEREOCTR
persist.sys.NV_STEREOSEPCHG
persist.sys.NV_STEREOSEP
persist.af.resampler.quality
af.resample
persist.af.resample
ro.telephony.default_network
telephony.lteOnCdmaDevice
dalvik.vm.dexopt-flags
ro.media.enc.jpeg.quality
ro.media.enc.hprof.vid.fps
ro.ril.power_collapse
ro.ril.sensor.sleep.control
pm.sleep_mode
power.saving.mode
persist.cust.tel.eons
persist.sys.dalvik.hyperthreading
boot.fps
shutdown.fps
debug.egl.profiler
hw2d.force
hw3d.force
video.accelerate.hw
debug.mdpcomp.maxlayer
debug.egl.buffercount
debug.enabletr
ro.hwui.renderer.disable_opaque
persist.sys.media.use-awesome (this is default anyway, and is controlled via the nuplayer checkbox in developer settings, so it's unneccesary)
CHANGE:
persist.sys.storage_preload=0 to persist.sys.storage_preload=1
tunnel.decode=false to tunnel.decode=true
af.resampler.quality=4 (or anything else) to af.resampler.quality=255
ro.config.dha_ils_enable=false to ro.config.dha_ils_enable=true
#ro.config.dha_cached_max=4 (remove the #)
#ro.config.dha_empty_max=36 (remove the #)
#ro.config.dha_lmk_scale=0.594 (remove the #)
sys.config.samp_spcm_enable=false to sys.config.samp_spcm_enable=true
sys.config.spcm_preload_enable=false to sys.config.spcm_preload_enable=true
ro.security.mdpp.ux=Disabled to ro.security.mdpp.ux=Enabled
For those having gaming issues, try removing them if you have them or adding them if you don't:
debug.performance.tuning=1
persist.sys.ui.hw=1
This might solve some issues for some folks.
---------------------------------------------------------------------------
INSTALLATION NOTE: Your first boot will probably take longer than usual, because this kernel makes significant (but safe, and auto-backed-up) changes to your core operating system.
This kernel includes drivers that TW has been compatible with since JB (I checked),
but didn't update the kernel drivers for (the best example of this is Autosleep). That said, there are userspace controllers like thermald and mpdecision (a binary linked to kernel code)
that interfere with custom governors, hotplug drivers, etc, so I've made the decision to back them up in the kernel script, and have them disabled while using this kernel.
The UNINSTALLER restores everything to the state it was in before flashing machinex, which is why I so strongly emphasize its use.

PERFORMANCE AND POWER-SAVING
Regarding the age-old performance/battery-life settings questions floating around, I'm gonna go ahead and suggest the following website created by a very dedicated fella who started out with the exact line of questioning, and built a genius guide for users of custom kernels. Heck, it's useful for developers too.
His username here is @gsstudios and he is a recognized developer here on XDA. Deserves it too
http://androidmodguide.blogspot.ca/
and on XDA:
http://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
I encourage you to rate that thread 5 stars, as it is the most comprehensive guide to kernel tunables you ever did see.
Note that I *probably* don't incorporate feature requests, as I have enough on my plate with bringing up the subsystems to a point where I can call this a stable release thread. Don't like it? YOU try backporting linux 3.9 scheduling code to a Samsung 3.4 base
On that note, if anyone here is savvy regarding kernel, C and (not "or") git development, I welcome coding partners because working with a team means better quality, better time management, and a better chance of incorporating fancy tweaks.
Cheers.

SYNAPSE:
Synapse has a default "warning" that comes up the first time you open it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The initial warning is just a bug in the app because it's just been installed.
It's a design flaw in the app itself.
Synapse bases its stability check on whether the device is rebooted within 2 mins of being turned on.
Synapse does this on first boot for every single kernel that uses it,
because it has no previous internal boot settings to base its decision on,
and also because the app expects saved defaults when none have been established yet.
It is nothing to worry about.
Untick the option in settings called "stability check" going forward.
Breathe.

Does it work?
I'm on imperium kernel on Thor s7 rom, I was wondering if your kernel works with m919, tmo gs4, I was looking forward to trying out your rom.
Thank you
-jeff

Hey Jeff,
The answer is...maybe/probably. I know that's probably not what you want to hear, but let me explain.
My device is actually an i337m (which is why i included it in the thread title), but I've been using the international kernels and roms without *major* issues ever since I've owned it. This is built from international sources, and it is running well on Albe's awesome 9.0 rom, so I imagine it will perform well for the ported/upgraded roms for our phones.
So if you've been using the international roms/kernels without problems, I see no reason why this wouldn't work for you other than the bugs/current issues listed in the op.
Sent from my GT-I9505 using XDA Forums

Can you create kernel for cm 13?
Wysłane z mojego GT-I9505 przy użyciu Tapatalka

Welcome to s4 community Bro.
Congratulations . Downloading. ......

Sounds nice bro, good Job! Try this Kernel later as soon as possible on my GT-I9505 with THOR S7 v1.5!
Sent from my SM-G935F using XDA-Developers mobile app

r2089 said:
Can you create kernel for cm 13?
Wysłane z mojego GT-I9505 przy użyciu Tapatalka
Click to expand...
Click to collapse
Sorry man, but CM is not on my list of priorities.
NAROUTO said:
Welcome to s4 community Bro.
Congratulations . Downloading. ......
Click to expand...
Click to collapse
Thanks! Though I've been around here for a while
xell75 said:
Sounds nice bro, good Job! Try this Kernel later as soon as possible on my GT-I9505 with THOR S7 v1.5!
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks! I hope you enjoy!
Everyone who uses this, feel free to provide feedback to help me assess what's needed for MarkTwo!

@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.

droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
Click to expand...
Click to collapse
Msm sleeper is a pretty sold hotplug for battery. I've noticed power efficient workqueues tend to slow things down/eat battery. Honestly I would try out msm sleeper for battery savings. Just note that games+youtube by design will eat into battery life. I will add some more power conscious governors soon. Also the usual stuff, the power your screen brightness the better, and turning off vibration/haptic will help.

robcore said:
Everyone who uses this, feel free to provide feedback to help me assess what's needed for MarkTwo!
Click to expand...
Click to collapse
I'm using this Kernel now on my GT-I9505 with THOR S7 v1.5 and so far a stable Kernel for me, many settings and alot settings I had never seen before as I like, very good! Just one thing til yet, Trying to set "Hellsactive" as CPU governor causes a freeze and a full reboot. Otherwise Kernel seems stable, using "Stockdemand" CPU Governor now. Keep going your work!
Sent from my SM-G935F using XDA-Developers mobile app

xell75 said:
I'm using this Kernel now on my GT-I9505 with THOR S7 v1.5 and so far a stable Kernel for me, many settings and alot settings I had never seen before as I like, very good! Just one thing til yet, Trying to set "Hellsactive" as CPU governor causes a freeze and a full reboot. Otherwise Kernel seems stable, using "Stockdemand" CPU Governor now. Keep going your work!
Click to expand...
Click to collapse
You know what, the interactive-based governors gave me trouble for the longest time. But I have found the issues in a great patchset, and am working on a fix that should be ready in a couple of hours. Until then EVERYONE STICK TO ONDEMAND-BASED GOVS!!!!

droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.
Click to expand...
Click to collapse
I'm guessing interactive based gov? If so, see my post above, MarkTwo is coming tonight.

robcore said:
You know what, the interactive-based governors gave me trouble for the longest time. But I have found the issues in a great patchset, and am working on a fix that should be ready in a couple of hours. Until then EVERYONE STICK TO ONDEMAND-BASED GOVS!!!!
Click to expand...
Click to collapse
Nice mate that's ok, thanks for the information! I'm looking forward for your new version!
Sent from my SM-G935F using XDA-Developers mobile app

xell75 said:
Nice mate that's ok, thanks for the information! I'm looking forward for your new version!
Click to expand...
Click to collapse
Dude thank YOU. I can't tell you how much I appreciate you and the others for testing this out and helping me iron out the remaining bugs, and being so understanding that "interactive based govs are broken" which is super embarrassing. Lol.

droidblitz said:
@robcore.
Im gonna try this to imperium rom v15.
So what is the best settings for more battery life ?
Playing clash of clans a few times a day browsing tapatalk and using youtube all day.
I want my device to run cool. Lol
Update:
Got a random reboot from the first initial setup.
==========
Will let it run for a couple of days with the preset default settings.
I will use my old 2600mah for now and later on swap my 7500mah once i get some good battery stats.
Click to expand...
Click to collapse
Update: simple gpu gov is snappy at stock settings and sooooo much better for battery consumption.
Also if memory serves me correctly, aren't you a cm kinda guy ; )

robcore said:
I'm guessing interactive based gov? If so, see my post above, MarkTwo is coming tonight.
Click to expand...
Click to collapse
Nope havent touched anything
There was a failed message when i booted the synapse app.
Something link kernel image failed but not sure should have taken a screencapture and the log.
Either way its working now.
robcore said:
Update: simple gpu gov is snappy at stock settings and sooooo much better for battery consumption.
Also if memory serves me correctly, aren't you a cm kinda guy ; )
Click to expand...
Click to collapse
More into like AOSP rom but had to use Tw for camera/video
I just noticed something.
My display colors somewhat changed? I think in a good way. Lol
simple gpu gov in marktwo?

droidblitz said:
Nope havent touched anything
There was a failed message when i booted the synapse app.
Something link kernel image failed but not sure should have taken a screencapture and the log.
Either way its working now.
More into like AOSP rom but had to use Tw for camera/video
I just noticed something.
My display colors somewhat changed? I think in a good way. Lol
simple gpu gov in marktwo?
Click to expand...
Click to collapse
Well it's great to see you here man! Lol with screen colour I made some fixes and changes to sammy's mdnie code. Upon checking the code against their roms, it turns out they've never bothered to fix discrepancies between the values in settings and the driver itself! "Standard" and "dynamic" have been switched this whole time. Also "auto" has been a placebo all along, they have had the backend in place all along but never initialized it in the list of available screen modes. On that note, for even cooler stuff check out the "video_mode" scenario in synapse. It's AWFUL for battery life, but sharpens everything to a crisp. I'm pretty sure kcal helped with color too(?).
As for simple gpu gov, works just fine on MarkOne! Franco's simplification to it made it a freakin' powerhouse while being better for battery somehow.
Building MarkTwo as we speak, then I'll test it and it's out! I'm working on the gov settings in synapse while building too. The tunable settings are ticking me off.

Develop Bugs

welcome