Hi,
Usually when we put a foreign sim card into a phone that is locked into a carrier, in my case sprint, the phone will ask me for a unlock code to put in. Strangely when I put another (bell Canada) sum into my new sprint prepaid phone it just remind me that the sim card is invalid but no pop up window to enter an unlock code. There is a website that will generate a unique config.dat based on imei serial and flash in hboot menu. This doesn't work unfortunately. I also paid sunshine to have s-off and changed my cid to the Super one 11111111, still not working.
Now I have sorta crazy idea. There are other variant of single sim roms that may be able to bring up the sim unlock code window but there is no way I can flash it since it always checks my darn model id and present a code 41 error in facebook. Is there anyway I can finally manage to enter an unlock code for my sim because I loved the phone so much.
Thanks!
I would like to do this as well with my Koodo Sim.
Related
I called Tmo (USA) and told them that I was travelling to Canada and wanted my SIM unlock code for my Dash. I gave them my IMEI and they emailed me a 8 digit code to unlock the phone. Only problem is that I need the "foreign" SIM to initiate the code entry on the phone according to their instructions (see below). I am wondering if there is another way to do this without the "foreign" SIM because I want to unlock it prior to travelling in fear that I dont want to break/brick my Dash while travelling.
Here is their email to me:
T-Mobile Sim Unlock Request
Sim Unlock Reference: XXXXXXX
IMEI: XXXXXXXXXXXXXXXX
Unlock Code: XXXXXXXX
Thank you for taking the time to contact T-Mobile. Below you will see the Instructions for unlocking your HTC device.
1. Insert the foreign SIM card
2. Power on the device and the display should read "Please input unlock code"
3. Enter the unlock code and the device should display "Phone is unlocked."
4. Allow the phone to scan the network (or manually click on the antenna icon to do this)
It is very important that the instructions and SIM unlock code are entered correctly as listed. If you receive an error message while performing the instructions do not make any further attempts to unlock the handset. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. You will need to verify the IMEI by pressing *#06# and contact Customer Care for support.
I saw this file (DASHv2Unlock.zip) from here. Anyone know if the code I got from Tmo will work with the DASH2Unlock program?
Thanks!
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
^^^What he said
neggie said:
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
Click to expand...
Click to collapse
Thanks, I try to go to a local Cingular retail store. MOst of my friends use Nextel or Sprint or Tmobile around here. Cingular has terrible coverage in Hawaii.
Sim
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier, then the phone should give you the unlock code prompt. I always keep an old cingular sim around for this purpose.
^ Any SIM other than your carrier's SIM is a foreign one.
~Cheers~
Actually, to unlock the phones you do not even need a foreign sim. You can use your T-Mobile SIM. They just tell you that so you can make sure it's working
shiggins9 said:
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier
Click to expand...
Click to collapse
Thanks for the laugh
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
PaisanNYC said:
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
Click to expand...
Click to collapse
Could have taken 15 seconds if you didn't swap SIMs
merwin said:
Could have taken 15 seconds if you didn't swap SIMs
Click to expand...
Click to collapse
How would you enter a code otherwise?When the Cingular sim was in it, it automatically prompted me for the unlock code.
Good question
im also curios as i dont have a foreign sim handy jsut been waiting for one to come my way to unlock.
When TMo unlocks??
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
randynchicago said:
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
Click to expand...
Click to collapse
Just a SIM unlock
unlocked now
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Hop on a plane to London, make some calls...
yggdrasil said:
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Click to expand...
Click to collapse
foriegn sim doesnt prompt to enter unlock code
Hello,
I just got my unlock code from TMO today. I put in a ATT sim but it does not prompt me to enter the code just says "Searching..." but never finds the signal.
Any help is appreciated.
currently running WM6.5 ROM V6.30EN By Lovebabyjing Build 23017[12/09/09]
tried to flash back to tmo official but kept getting errors at 3% of upgrade. "error 244 incorrect model id???"
Guys I'm over in Europe and attempting to use a vodaphone SIM, I'm running NRG's ROM and radio 4.49.25.17.
T-Mobile had kindly provided the SIM unlock code for my TP2 prior to my trip but when I put in the Vodaphone SIM it doesn't prompt me for an unlock code?
Do I need to manually enter it somewhere?
I think its supposed to prompt you with a screen asking for the code, make sure the Vodafone sim is properly inserted and if that doesn't work you can try looking up the phones engineering mode.
Is the device booting into Windows Mobile & usable with the other SIM card installed? Where did you buy it? Sounds like it may be unlocked already. Anytime I put the wrong SIM in a locked device, on boot up I would get a message for the unlock code & device was unusable, would not progress past this screen. You had to either enter the unlock code or reset & remove the SIM card.
First, check if your device is unlocked by going to Start>Settings>System>Device Info and on one of the tabs, it should say unlocked somewhere. Or, you can check it by downloading ATCommander onto your device and entering [email protected]?40 into ATCommander. It should return 0 if you're unlocked. If it returns 1, you're SIM locked.
Now, if you are still locked, try flashing the Stock Tmobile USA ROM, and insert the Vodafone SIM then. Hopefully, a dialog should come up with an area to enter you unlock code. On the Kaiser, you supposedly had to be running the stock AT&T ROM in order to get the dialog unlock the device with an unlock code. Hopefully that will work. If not, TMobile tech support could probably answer this. Hope that helps
Hi guys,
I'm trying to sim unlock my phone to use with a different sim card in Europe. Currently I have the AT&T version of the phone. I am S-Off and I have used SuperCID. Unfortunately, I tried on multiple sites to buy a code to unlock my phone (related to my IMEI number). However, every site keeps telling me that they cannot find a code for my device. I checked and my IMEI does not appear to be blacklisted. What can I do now?
Thanks,
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Akosp said:
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Click to expand...
Click to collapse
Are you sure the phone is locked to AT&T? You title says "Unlocked HTC 10....". Your device could already be unlocked. Also, which sim card are you inserting and expecting code prompt to appear?
This is how it is normally done:
Lets say your device is locked to AT&T at the moment. You have to put another carrier's sim card(T-Mobile for example), then the code prompt should appear on the screen asking for the code.
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Wonders_Never_Cease said:
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
Click to expand...
Click to collapse
yeah I didn't know they did simlock either but I guess when you use a phone on their network it does.
when I tried to activate on sprint they said I had to take care of the att lock first. I have the unlock code but no idea where to use it. do I need to do something through the dialer?
Put Sprint sim in the device boot it up... IF theres a lock on the sim slot, it should ask for an unlock code which is input through the dialer when prompted
Akosp said:
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Click to expand...
Click to collapse
If device was bought from htc.com, then it should be unlocked already. I believe the radio frequency in your phone may not be fully compatible with Sprint.
Just check HTC's website and you will see that they offer separate models for Verizon and Sprint. - http://www.htc.com/us/go/buy-htc-10/
For example I have a T-Mobile service, so I purchased an unlocked HTC 10 which is compatible with AT&T as well. If I would have another carrier, such as Verizon or Sprint, then I would choose accordingly.
Hi,
I've bought a XT1952DL (DL stands for damn locked) in US and traveled back to Canada. When I insert a Sim card from different providers, it does recognize it (Network SIM lock message) but it won't prompt for an unlock code...
Any idea on how I can solve this issue?
Thank you!
Dl is for trackfone variant it's very hard get unlock code for them
Metro PCS is the worst I've ever dealt with.... You need 180 continuous days of service locked to that IMEI to be eligible for unlock... CRAZY!
Perhaps we can modem flash? How are the variants encoded? How can we convert?
So... I flashed the stock modem and everything else stock, now I get a SIM Unlock code entering box... but I can't find anything that can produce it, paid or otherwise :/. At least now I don't have any MetroPCS garbage on the phone.
https://forum.xda-developers.com/moto-g7/how-to/channel-moto-g7-factory-firmware-images-t3996303
Are you saying you flash the XT1952DL to Retail? If so, how!? This phone is a pain... I found a remote USB sim unlock for $30, but would like this thing on retail ROM :/