Need help badly. No OS cannot boot passed twrp/cwm - Verizon Galaxy Note 4 Q&A, Help & Troubleshooting

Hello. Ive been 3 days with no phone now and am at my wits' end. I converted to developer, and in trying to clean install a ROM, messed something up...badly.
I can flash TWRP or CWM both through Odin, but no roms work at all. All of them get stuck at system.img.ext4 for about 10 minutes and then it fails. I cant flash anything through recovery, either, because neither recovery program can read my SD card for some reason. Ive read up on similar issues, but all of the fixes involve formatting the SD card through a functioning ROM, which isnt a possibility for me. I am desperate at this point...very desperate. Also, Ive tried the XDA IRC rooms but i'm not sure if i even join them correctly, as for days i cant get even a single letter response from any of the listed participants. Ive gotta be doing something wrong. Any help would be greatly appreciated. At this point i dont care if i lock my bootloader forever i just NEED a working phone.
Smartswitch doesnt work because it wont recognize my device, and when prompted for a S/N, nothing works...ive tried everything from the IMEI to the SIM s/n from the original package sleeve.

SOLVED:. talked to Samsung reps and confirmed that the note4 in fact has no serial number and that function if the recovery tool doesn't work for them. Did a day or researching on ADB stuff, which was new to me, and got cm13 successfully working via side load. After that, cm formatted the memory card to he readable, and all seems right in my note4 world for now.

8wrlobo said:
SOLVED:. talked to Samsung reps and confirmed that the note4 in fact has no serial number and that function if the recovery tool doesn't work for them. Did a day or researching on ADB stuff, which was new to me, and got cm13 successfully working via side load. After that, cm formatted the memory card to he readable, and all seems right in my note4 world for now.
Click to expand...
Click to collapse
So what exactly did you do been trying to get a rom to work on mine that I did the dev convert on. I was on the latest ota update. Got it rooted and flashed a different kernel got it to boot on stock firmware but can't get any other rom to install and boot.
Sent from my SM-N910V using XDA-Developers mobile app

slowpoke2006 said:
So what exactly did you do been trying to get a rom to work on mine that I did the dev convert on. I was on the latest ota update. Got it rooted and flashed a different kernel got it to boot on stock firmware but can't get any other rom to install and boot.
Sent from my SM-N910V using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah Odin and sd card options all fell flat on their faces for me...I never did figure out the system.img.ext4 hangup I got from odin.
In the end, I used Odin (3.9 iirc) to flash twrp. Flashing two or cwm both never gave me any trouble. From there, I downloaded the cm13 latest build from the thread here and followed this guide (http://forum.xda-developers.com/showthread.php?t=2317986). Sideload failed for me as well, but I was able to push the rom to my phone.
I downloaded a adb/fastboot program (https://androidmtk.com/download-minimal-adb-and-fastboot-tool) and in the x86 program files folder for it, made a new folder called FML lol and moved the ROM zip folder into it. Then did
abd push ___________.zip /sdcard/_________.zip. (note that I don't remember exact adb commands...it had been hours of frustration. Definitely consult the experts (not me) here before trying what I did. In the end it worked great. Good luck.
It was my first experience with adB stuff and tons of trialife and and error but I sure learned tons after all the research and frustration.

8wrlobo said:
Yeah Odin and sd card options all fell flat on their faces for me...I never did figure out the system.img.ext4 hangup I got from odin.
In the end, I used Odin (3.9 iirc) to flash twrp. Flashing two or cwm both never gave me any trouble. From there, I downloaded the cm13 latest build from the thread here and followed this guide (http://forum.xda-developers.com/showthread.php?t=2317986). Sideload failed for me as well, but I was able to push the rom to my phone.
I downloaded a adb/fastboot program (https://androidmtk.com/download-minimal-adb-and-fastboot-tool) and in the x86 program files folder for it, made a new folder called FML lol and moved the ROM zip folder into it. Then did
abd push ___________.zip /sdcard/_________.zip. (note that I don't remember exact adb commands...it had been hours of frustration. Definitely consult the experts (not me) here before trying what I did. In the end it worked great. Good luck.
It was my first experience with adB stuff and tons of trialife and and error but I sure learned tons after all the research and frustration.
Click to expand...
Click to collapse
OK so once you were able to get the rom pushed to your phone it installed fine? I just can't get them to install and boot right. What version were you on and did you do safe updates? Guess I'll have to start a new thread on it
Sent from my SM-N910V using XDA-Developers mobile app

I was/am at PA1. I did the smartswitch emergency recovery to stock PA1 and then redid the developer conversion, before having a hangup and wiping everything with twrp...like everything (BAD idea). That is what caused all my odin and sd card woes to begin with.

Related

[Q] Failed Sprint Note 2 Root Stuck in Loop, Dev not answering

I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
doesitwork? said:
I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
Click to expand...
Click to collapse
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
vel7wil said:
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
Click to expand...
Click to collapse
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
doesitwork? said:
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
Click to expand...
Click to collapse
When used the toolkit a year ago, I found that I had to turned off all firewalls and antivirus apps for it to work properly. Once I did that it worked fine....give it a shot...can't hurt......might even be able to repair what you've done so far.....Good Luck!!!
I'll give this my best shot...download a rooted rom from the development section and place it on your SD card.
Download toolkit from here (I take no credit for this) http://d-h.st/iu0
Put phone in download mode.
Open ODIN and uncheck "auto reboot". Then click "PDA" and add the .tar file (recovery).
Plug phone into PC (make sure to have samsung drivers installed).
Once ODIN sees the phone you can click "start".
When the recovery flash is complete, pull your battery to ensure power down.
Boot into recovery : volume up, home, power all at the same time.
Flash rooted rom.
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
---------- Post added at 08:14 AM ---------- Previous post was at 07:36 AM ----------
[/COLOR]
doesitwork? said:
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
Click to expand...
Click to collapse
It is usually a pretty common courtesy to hit the "thanks button" when someone helps you out.
I am not at all trying to be mean, just letting you know.
garwynn said:
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Click to expand...
Click to collapse
hello @garwynn im trying to do this same thing.. its been so long since ive odin'd, how would i put TWRP on this now after these steps? i tried goomanager and that didnt work. (couldnt find recovery) and i tried flashing in stock recovery and got a fail . im kind of lost right now and am wondering if there is another way or do i have to do the toolkit? thanks
edit: for some reason, the tool kit links have been pulled by a mod. ..but this video helped me get twrp back. phew. zedomax to the rescue.. http://www.youtube.com/watch?v=7leb9OznhqY

[UPDATE 12/24/13 ] SOLVED! Hard-bricked? Un-hard brick using sd card SM-N900T/N9005

UPDATE:Thanks to the hard work and diligence of XDA members @noobtoob, @ecs87, and recognized contributor @DocHoliday77, recognized developer @shabbypenguin, and others who will be added to this list after I go through some threads for their names -
It is my pleasure to announce that owners of the T-Mobile Samsung Galaxy Note 3 who have unfortunately hard-bricked
their device, (will not turn on, no led light, qhusb_download mode as device status when plugged into pc) are NOW able to boot their device using sd card mode, instead of expensive JTAG repair!!
noobtoob has been so kind as to ship me the sd card that he successfully flashed, with uncorrupted files from a working tmobile note 3, using odin! Thank you! These files contain all of the prerequisite files needed to boot in this state, to download mode! Once there, a stock firmware flash with ODIN will totally restore your device, just as the SM-N900A variant (at&t), and tmobile and sprint galaxy s3 hard-unbrick methods right here on XDA, can accomplish as I type!
Now, owners of this device can flash with alot more ease, and also this could not only lead to discovery of this method for the entire Note 3 series, perhaps other devices as well!
Read the thread! Why just look for a quick fix when you can actually learn more about the way file systems in android work - and what to avoid doing so that the chances of this happening in the future are less likely? I conducted quite a bit of research, and spoke to some very talented people to get this thread where it is - and to learn some new things myself. This thread contains alot of good insight and discussion about how to solve this issue. Perhaps you could learn something. Either way, all of what you need to fix a hard brick for these two devices is here.
[Update] 12/17/13]
I do in fact now have the sd card. Thanks @noobtoob! The device will not boot still.
I'm going to try a jig also.
[UPDATE] 12-21-13
Thanks to time, guidance, and commands from @shabbypenguin, we found the reason why the sd card noobtoob wrote the umbrick.img to will not boot. It is simply not large enough! So now thanks to proper guidance and this is from shabbypenguin, Tmobile Note 3 users are almost safe from a hard-brick!
If anyone deserves credit for this all, it is @shabbypenguin and @KAsp3rd, and ultimately Samsung, for at least programming their phones to be virtually fail-safe! Special thanks @zinnium to be the first to report this working for them! Thank You!
We have the new .img , so the proper method, and files will be in this post for all to use. For now, they are in this thread. Of course all contributors will be thanked. Give me a little time to get myself together here in the real world, this has happened so fast I've barely had time to keep up!!!!!
Pm me, or post if this method works for you. Now, I mean this only if you first are aware that **IF YOU FLASH ANYTHING OR USE THIS METHOD IT IS AT YOUR OWN RISK - I OR NO ONE ELSE IS RESPONSIBLE BUT YOU!!**
Also, only if you are simply using the very last unbrick.img posted by noobtoob, in this thread. It is ONLY FOR THE TMOBILE NOTE 3 SM-N900T VARIANT!!!! USING IT FOR ANY OTHER MODEL WILL NOT WORK!! THERE IS AN UNBRICK.IMG FOR THE SM-N9005 ALSO AT THE BOTTOM OF THIS POST! **AGAIN - ONLY USE THE .IMG THAT IS FOR YOUR SPECIFIC DEVICE!!!! YOU HAVE BEEN WARNED AND IT IS NOT MY RESPONSIBILITY IF ANYTHING GOES BAD!!!**
The file is 165mb in size, and needs to be written to a 32 or 64 gig sd card with Linux or another image writing tool, even using a CORRECT dd command in terminal emulator, with a rooted device. It has also been confirmed by XDA member zinnium to work with a 310mb system dump from of course - a WORKING T-Mobile Note 3. Also, XDA member aiti1980 has confirmed success with hard-unbricking the SM-N9005 model. The slimmer file does however, also contain all of the necessary partitions to correctly re-write improperly overwritten ones, including recovery!
Do not try to start a new thread and take credit for this!! This is the thread where this method started specifically for the t-mobile note 3 , and I take no credit for this method!!!! The real thanks should go to @shabbypenguin, and @KAsp3rd, who have brought this method, from unknown origins of my knowledge at the time of writing this - to XDA. @shabbypenguin has been kind enough to lend his expertise and time here in this thread, for the t-mobile note 3!! YAY Just in time for Christmas! Merry Christmas All!
UPDATE: 12/24/13 - Here's a Christmas gift for all SM-N9005 owners with a hard-bricked device...
aiti1980 said:
ooo! Thanks!!!
I use adb driver
into cmd win 7 i run:
ADB SHell
su
and you command and get unbrick.img
waiting for result...
I writting *.img on adata Microsd card from win 32 Disk Image
Update: WOW!!! My hard bricked phone power up!
Many thanks from RussiaЖ)))
Where me put unbrick.img: dropbox, or another service?
Click to expand...
Click to collapse
This method works for the SM-N9005 variant too! CONFIRMED!
One step closer for a universal hard-unbrick method for ALL
Galaxy Note 3 Models! HURRAH Special thanks to aiti1980 for being the first to try and succeed! Congrats!
MERRY CHRISTMAS!*
Note 3 SM-N900T unbrick.img
http://www.mediafire.com/?6nu61z43y51v3k4
Thanks to noobtoob for the above SM-N900T unbrick.img
https://mega.co.nz/#!UtNhgAja!XLL6Xy7qxW0L9t4ZgXgowHFNlSsLuz5RIQ-fQc5Ctxk
Thanks to aiti1980 for the above SM-N9005 Unbrick.img upload! ENJOY
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
NeoAndroid said:
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
Click to expand...
Click to collapse
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
msmercy42 said:
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
Click to expand...
Click to collapse
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
chstewart said:
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
The help is much appreciated, however I cannot turn on the phone at all...
msmercy42 said:
The help is much appreciated, however I cannot turn on the phone at all...
Click to expand...
Click to collapse
You should be able to get into download mode still. Try pushing a new recovery with Odin. If still having issues Odin stock or you can also use kies to restore your phone....
Sent from my SM-N900T using xda app-developers app
Thanks for the help, I can't get the phone on at all though... it doesn't even recognize my device other than windows stating that it cannot recognize it, as it
malfunctioned.
Kies, will recognize it, even in this case?
Lastly, are you telling me that there is a way to push recovery with Odin even though the device is off, will not go into download mode, or recovery? If so, that's great!
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
d12unk13astard said:
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue avaiable. Again, thanks a lot.
msmercy42 said:
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue available. Again, thanks a lot.
Click to expand...
Click to collapse
Update - I tried using Odin 1.85. I see the device being recognized in one of the ports, but flashing the stock firmware, or twrp yielded no results.
I tried reinstalling the Samsung drivers, nothing. I even tried Odin 3.07, and 3.09. Since the device will not power on, I guess that is why it will not work.
I then tried an emergency firmware recovery using kies. It did not detect the device, which is normal, so I disconnected and reconnected the device repeatedly,
with no success. I uninstalled an reinstalled kies, and that did nothing either.
I installed the android 4.3 sdk, and used adb in an attempt to recognize the device using commands like adb reboot recovery.
Adb replied with : no devices found.
I attempted through windows, to examine the ports, and found that there were different drivers present. The drivers installed on the PC were named QHUSB_DOWNLOAD 9008. When I first plugged the device to the PC, I noticed the device named as QHUSB_BULK, before changing to the above name, the same as the name for the drivers.
So my device is still alive.
Any advice? Can anyone help me get my phone on, at least into download mode? From there I can get it going. Please help if possible.
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I tried everything. No, download mode is not working, though I agree that it should theoretically still. I am still trying the three button method.
Would a jig work? I am working on one. Any ideas besides that?
i was going to suggest a jig actually. if that doesn't work you're probably out of a phone. could try warranty since it's REALLY bricked they probably won't be able to tell, did it with T-Mo on my G1, said it stopped turning on.
Have you tried removing the battery and holding down all the buttons before reinserting the battery again. My phone wouldn't turn on once and this helped. If not call tmobile tell them all kinds of funky things are happening with your phone and it keeps turning off. Once they tell you to factroy reset your phone, act like you are following their instructions, then when they tell you to turn it back on, tell them it will now not even turn back on. They are so slow there & will send you out a new one you'll have in 24hrs. Trust me Ive had to do this numerous times due to ocd when it comes to phones and having to have reasons to return them for the slightest flaw. I returned my galaxy note 2 before i got this note 3 like 8x's & even returned it the wk before i bought my note 3 just to get 1 with all new parts if not maybe even a new phone so the note 2 i sold would be in practically new condition if not like i said brand new,lol. im sure someones gonna get all butt hurt and start talking about fraud,lol
In the future you can flash Twr using Goo on your phone with No computer. Use JRummy 's rom Toolbox pro.
Sent from my Nexus 4 using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
msmercy42 said:
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
Click to expand...
Click to collapse
It doesnt look good. I sent my vzw dev note 3 to Samsung with the same reboot problems and not being able to flash anything, and even they couldn't fix it.
Sent from my SCH-I535 using Tapatalk
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Sorry to hear! I'll save you a whole bunch of time, I did the same thing to my galaxy s3 while trying to upgrade my installed clockworkmod. Long story short the commands I entered into terminal emulator we're fine its just that I put the wrong memory block which apparently flashed the image to the wrong area of the chip. I rebooted the phone and nothing happened. When I plugged it into the PC I would get the same thing you're getting. After a ridiculous amount of time I managed to get my hands on the correct drivers and installed them and found that flashing a stock firmware through Odin was a waste of time.
You need to send your phone into Samsung and the only solution is a motherboard replacement. Or you can find someone locally who can do a JTAG mod for you. But doing so will definitely void your warranty. When I shipped my phone into Samsung I told them I was using the phone and all of a sudden it got very hot and turned off and wouldn't turn on. Back in the S3 days I had to wait 3 weeks to get my phone back repaired. But these days there now Samsung service centers everywhere so you can probably get replaced phone on the spot.
Sent from my SM-N900W8 using Tapatalk 4
Qhusb_bulk drivers??
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
M1k3Carson1369 said:
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
Click to expand...
Click to collapse
Nothing yet....and I'm looking everywhere
for a system dump of the T-Mobile note 3, so I can maybe find the files needed for the fix.

[Q] SM-T217s - my first ever brick.

Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
joshuaerda said:
Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
Click to expand...
Click to collapse
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
joshuaerda said:
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
Click to expand...
Click to collapse
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
254336992952
​
joshuaerda said:
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
Click to expand...
Click to collapse
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
IAMRUDYT said:
​
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
Click to expand...
Click to collapse
same here, I have the rom, but hesitated on the firmware, waiting to see if someone gets the wifi working, not to many developers here for this tablet.
sm t217s
Ok guys. Heres my deal with this TAB. Ive rooted... Unrooted. wipe wipe wipe wippty wipe . WiFi not working. Fixed it with NB8. So here now I sit with:
----NB8 Wifi works---
----TWRP-----
Yup, pathetic i know. I cant even get the supersu to flash. TWRP wont move it over to flash off external sd card. Im not hip to abd plus i heard you leave yourself wide opento visitors when using that.
Ive eye hustled a thread on here that some friends are getting back together to rock it on a custom rom so my fingers are crossed. This tab is so neglected i mayjust go get the 210r. But i really dont want to. So my question is....
Can someone please give me links to files that work with the NB8 stock firmware. Some of the links are outdated after sprint uploaded the new bootloader. We are a small community on this tab so lets stick together on this. I dont think cynogen isgoing to do anything for it. As they concentrate on thier new phone which looks pretty sweet by the way. K im done. Going to wait for help and play with this htc one s
thats been collecting dust.
Rooted
Sent from my SM-T217S using XDA Premium 4 mobile app

[Q] Rooted Note 4 can't copy roms to phone

I rooted my note 4 and noticed it was really laggy so I planned to flash a new rom. Went into Twrp and did a full wipe and when I went to load my new rom onto the mounted phone (in Twrp) I got the error message in windows saying Cannot copy file "Its file size is larger than the device limit". I did some research and this seems to happen when a file is larger than 4 GB but the file I am trying to load isn't. I have 3 potential roms all around 1.2 GB and all give the same message when trying to put them on my SD card or the internal storage. Anyone know a fix for this. I tried going to the backup I made before trying the new roms and I get a boot loop so my 2 day old phone is partially bricked at the moment. I can still get into TWRP and I still can use Odin but I can't copy and past roms onto the phone. Any help would be appreciated thanks in advance.
This is still an issue but I found a workaround, a rather obvious one that in my panic I didn't think of. I just used my SD card reader and put the roms I wanted on my SD card then put it back in my phone and installed through twrp. This worked well but now the google play store isn't working for some reason even though I am using a mostly stock rom. I'll look at that roms thread for answers
tonygotskilz said:
This is still an issue but I found a workaround, a rather obvious one that in my panic I didn't think of. I just used my SD card reader and put the roms I wanted on my SD card then put it back in my phone and installed through twrp. This worked well but now the google play store isn't working for some reason even though I am using a mostly stock rom. I'll look at that roms thread for answers
Click to expand...
Click to collapse
Extract the file SDfix.apk from this zip,install and run it. It may solve the problem. This problem happens to me everytime I flash a stock rom and this cures it.
Same Problem Here
jhill110 said:
Extract the file SDfix.apk from this zip,install and run it. It may solve the problem. This problem happens to me everytime I flash a stock rom and this cures it.
Click to expand...
Click to collapse
How do I install SDFix.akp? All I have working is TWRP 2.8. Goal is to install HD Rev 82. Phone has no OS on it right now.
Download and install foldermount from the play store. Then run it and reboot. Should fix your issue.
teebright said:
How do I install SDFix.akp? All I have working is TWRP 2.8. Goal is to install HD Rev 82. Phone has no OS on it right now.
Click to expand...
Click to collapse
Extract it... Transfer to your phone... Tap it. You will get a "install" prompt... Install... Find it in the app drawer... Run it... Look carefully for the check box, it's hard to see... Viola... Your good to go... No need to go to the play store...
Thanks, but...
jhill110 said:
Extract it... Transfer to your phone... Tap it. You will get a "install" prompt... Install... Find it in the app drawer... Run it... Look carefully for the check box, it's hard to see... Viola... Your good to go... No need to go to the play store...
Click to expand...
Click to collapse
My phone is soft-bricked right now lol. I ended up copying the files via ADB with this helpful video:
https://www.youtube.com/watch?v=NaK5OxUeDKM
This line from cmd line w/ Minimal ADB and Fastboot did the trick:
adb push yourRomNameHere.zip /sdcard/.

Failed root attempt left tablet at the Samsung screen

I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:

Categories

Resources