{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
SCREENSHOTS
Changelog v1.0:
Based on FlyMe 5.1.5.13R (Multilang)
Signed and zipaligned
Added SuperSu v2.72
Added Dolby Atmos 6.5
Added ADBlock Switcher script
Added BatteryCalibrator script
Added Script per imparare a bestemmiare
Added Material Terminal
Added Kernel Adiutor
Added Xposed Installer
Rendering Tweaks
GPU Tweaks
Battery Tweaks
Ram Tweaks
Performance Tweaks
Touchscreen Tweaks
Interfaccia più fluida
Camera Tweaks
Flashlight intensity Tweaks
Voice call Tweak
Internet & Download Speed Tweaks
Video Tweaks
3G Signal Tweaks
Google DNS Tweak
Added support to IPV4 and IPV6
Wireless Tweaks
Click to expand...
Click to collapse
Changelog v2.0:
Updated base to 5.1.5.27R (multilang)
FIX bootloop problem
Automatic wipes for cache and dalvik-cache during the installation
Click to expand...
Click to collapse
ROM
PsyME v1.0 DOWNLOAD
PsyMe v2.0 DOWNLOAD
Click to expand...
Click to collapse
TOOLS
Skynet TX7 DOWNLOAD (Opzionale) (Consigliato)
Xposed v85 DOWNLOAD (Opzionale) (Consigliato)
Gapps 5.1 DOWNLOAD (arm64>5.1>pico)
Click to expand...
Click to collapse
INSTALLATION
DO NOT FORMAT /system
Factory Reset (cache, dalvik-cache and data) (do nothing if you are updating from PsyMe v1.0)
Flash ROM
Flash Gapps
Flash Project Skynet (opzionale) (consigliato)
Flash Xposed (opzionale) (consigliato)
DO NOT FLASH SUPERSU
DO NOT FLASH DOLBY ATMOS
Wipe cache and dalvik only if you have flashed Skynet and/or Xposed
Click to expand...
Click to collapse
CONFIGURATION
Configuration
#ADBlock Switcher
1. Open "Material Terminal" app
2. Type:
Code:
su
adblock
When the script ask to you, press "y" and chose your preferred adblock.
NOTE:"Light ADBlock" is enables by default.
#OTA Updates
You will receive notification when updates are availables.
If you not receive notifications, simply tap on OTA Update Center app and search it manually.
#Surprise Script (only for italian users)
1. Open Material Terminal app
2. Type:
Code:
corso
3. Follow script instructions
#BatteryCalibrator
1. Open Material Terminal app
2. Type:
Code:
su
BatteryCalibrator
Let the battery charge at 100% and voltage show "4428mv".
Press "A" and the script will automatically calibrate your battery, or press "C" for do it manually.
The battery is now calibrated!
#PROJECT SKYNET
1. Open Material Terminal app
2. Type:
Code:
su
menu
A menu will appear and you can do anything you want.
For maximum performance, set "skynet mode" on "game" and with Kernel Adiutor you can set governor on "ondemand" or "performance"
Click to expand...
Click to collapse
More info on Project Skynet:
PROJECT SKYNET
Click to expand...
Click to collapse
Thanks to:
@Chainfire for SuperSu
@Stericson for Busybox
@Rovo89 for Xposed
@Zeppelinrox for BatteryCalibrator script
@BSDgeek_Jake for MotherOfAllADBlocking
@Dolby for Dolby Atmos and @worstenbrood for porting
@k1ks for PROJECT SKYNET
... and many other that i can't remember at this moment
Click to expand...
Click to collapse
If you like my work hit thanks button or you can offer me a coffee clicking here
XDA:DevDB Information
PsyMe, ROM for the Redmi Note 2
Contributors
Psy_Man
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: FlyMe 5
Version Information
Status: Beta
Current Beta Version: 5.1.5.27R
Beta Release Date: 2016-05-20
Created 2016-05-22
Last Updated 2016-06-09
first of all, thank you for your work.my first impressions: browser crashing, there are still chinese things, it would be very good if you remove them.camera is good.i will be looking for your update,i am a very big fun of flyme.
Very nice rom for browser i use chrome so no problem for me i removed some.apps i dint want the only huge bug i found is data toogle on notifications doenst work properly when you enable data they cant turn of from status bar so you have to go to settings to close them or use power toogles like me overal i love your rom and if.you can add fm radio plzzzz i want it
nikolas60 said:
Very nice rom for browser i use chrome so no problem for me i removed some.apps i dint want the only huge bug i found is data toogle on notifications doenst work properly when you enable data they cant turn of from status bar so you have to go to settings to close them or use power toogles like me overal i love your rom and if.you can add fm radio plzzzz i want it
Click to expand...
Click to collapse
Next release will be much better!
I can not finished set up (have an error when try to choose which sim to use for sms)
edit: I though I was so sly and I took off one sim - but after that set up has an error just on the first screen (with languages to choose)
ulaon said:
I can not finished set up (have an error when try to choose which sim to use for sms)
edit: I though I was so sly and I took off one sim - but after that set up has an error just on the first screen (with languages to choose)
Click to expand...
Click to collapse
how did you bypass this error?
will wait for update
I did not, so my question to developer is wether thery is the way to fix it?
please advise urgently how to enable voicemail on this good rom as cannot find respective section for voicemail.
any news on these?
i've tried to flash this rom, but got error messages
failed to mount /dev/blocl/platform/mtk-mdsc.0/by-name/system....... etc
Click to expand...
Click to collapse
Good rom
But whatapp crashing when try to answer on notification center. Also is there any future update including deleting chinese bloatware? Thanks for your work.
Hello there, @Psy_Man and whomever it may concern,
Firstly thank you so much for the great effort by porting this ROM, I really liked it and recommend using it!
Secondly, I want to report about few bugs I've faced after using this ROM for 3 days (using the phone as a primary phone, daily driver),
1) The first bug I've faced in this ROM was a bug that was reported by "soulcalibur678" on the 21st of June, and it's about WhatsApp crashing, I have noticed that it crash after I get a notification of a message and leaving it by itself for almost 10-15 seconds, also WhatsApp crash whenever am in a chat and somebody else (third party) send me a message, also when I used 3 chats and more, it would crash and never work again unless I see the 3 chats (open the new messages) so fast before it crashes (screenshot attached).
2) Airplane Mode: Airplane Mode doesn't work, I can't even disable the SIM, even if I used the Airplane Mode it would still receive and make calls normally like I haven't enabled the Airplane Mode (screenshots attached).
3) Firmware Update: I have navigated to the update section in settings after using the phone for a whole day, I have checked for update and found that there is an update, and it is "Flyme 5.1.6.6R beta", downloaded it, tried to install but couldn't install due to "Error: 7", updated the TWRP recovery to the latest version 3.0.2.2, tried to unmount system and reboot recovery, tried flash it over 10 times but everytime I end up facing the same error (screenshot attached).
That's it for now, these are the bugs I've faced after using this ROM for 3 days, everything else works like a charm for me.
Hope this help you developing and improving this great ROM,
Sincerely yours.
i received ota update and download it, but how can i install this ota update? TWRP can't install it
Related
Hello everybody, I'm glad to share these days' work of bringing Marshmallow to the OnePlus One.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is based on CAF release LA.BF.1.1.3-00110-8x74.0, with some little modification to some components to make it build. The kernel is based on CM12.1. You can check the kernel source on my GitHub. Links will be posted later.
Nearly all basic feature should be working: 4G data, 4G->3G fallback on calls, SMS, camera/camcorder, BT, WiFi, MTP, 4K recording, HW decoding etc.
kexec hardboot is supported.
Known issues:
1. Stock camera doesn't work well. Here is a list of comparison:
Feature - Working on Stock camera - OppoCamera port - CameraNextMod?
Switching front/back cam - No - Yes - Yes
Camcorder <=1080p - No - Yes - Yes
4K Recording - No - No - Yes
Click to expand...
Click to collapse
(maybe I should get a monospace font in Firefox)
2. Battery drains... a little faster? (Just a little)
3. The ROM comes with ancient Launcher2. Launcher3 is not included. I will post this as an attachment. Launcher3 has been added since 20151018
4. Picture in apps are sometimes automatically zoomed out (and distorted) and can not be zoomed in. Is this a common problem among AOSP-based Marshmallow ROMs? I tried AOSP and CAF sources, and they both have the same issue. Need to change DPI via build.prop
5. Security related: SELinux is disabledpermissive in 20151018. HW Crypto is not working. Software-based credentials storage.
6. No gestures (DT2W etc) Workaround available in Q&A
7. Kernel panics/reboots on switching adb on & off.
8. WiFi AP still runs on 2.4G even when 5G is selected.
If you find more issues, feel free to post here. However, I may not be able to solve them since schoolwork is so heavy... And this ROM may not be updated regularly.
Video Tutorials by @udimars30:
https://www.youtube.com/watch?v=XxjnTae2nCM - How to install ROM and Gapps
https://www.youtube.com/watch?v=kWZcxVs992c - How to get root
https://www.youtube.com/watch?v=vZ7qW4j3Kso - How to enable softkeys, Now on Tap
Thanks!
Q&A:
1. Kernel Compatibility
The kernel of this ROM is based on CM12.1, but not exactly the same. You can not use kernels built for CM12.1 with this ROM. Marshmallow requires new features like updated SELinux, uid_cputime, etc, but CM12.1 source does not contain these features. You can take a look at commits and it will be clear.
Click to expand...
Click to collapse
2. Recovery Compatibility
I am using TWRP 2.8.7.0 with MultiROM support (TWRP_multirom_bacon_20150803-00.img from MultiROM thread). If you can not get the ROM installed properly, please try updating your recovery.
Click to expand...
Click to collapse
3. Rooting
Since this is a experimental build, I have turned off SELinux completely. SELinux is permissive. Just flash SuperSU 2.50 zip in the recovery and it will be fine.
Click to expand...
Click to collapse
4. F2FS Support
The kernel has F2FS driver builtin and corresponding entries in fstab file (as CM does). Vold has F2FS files as well, so you can give it a try. But I can not guarantee that it will work flawlessly.
EDIT: Some people tested and reported it not working. Make a backup before you try.
Click to expand...
Click to collapse
5. GApps
I'm using DeltaGapps with SetupWizard removed (yes it is the one that keeps force closing. you can disable that via adb as well). I think the lack of permissions(appops_whitelist.xml I guess) caused this failure. After allowing every permission required by Google apps and adding the account manually, Sync and Store works as expected. Now on Tap seems broken. Maps is working, and gets a lock in secs..
There are some other GApps package links in the first few pages. Some people say Now on Tap works with them, you can have a try.
Click to expand...
Click to collapse
6. Disabling HW Keys and Enabling Softkeys - The Easy Way
Code:
echo qemu.hw.mainkeys=0 >> /system/build.prop
reboot # enables soft keys
echo 0 > /proc/touchpanel/keypad_enable # disables hw keys, need to do this on every boot
Click to expand...
Click to collapse
7. Where Is The App Switcher?
If you are comfortable with softkeys, goto 6.
If you are not, goto 3 and take a look at http://forum.xda-developers.com/showpost.php?p=63313126&postcount=115double tap the home key.
Click to expand...
Click to collapse
8. LCD Density
Code:
wm density 440 # if you want 440
wm density reset # self-explanatory
Above will lead to corrupted pics.
Change
Code:
ro.sf.lcd_density=480
to
Code:
ro.sf.lcd_density=VALUE_YOU_WANT
(Note: I did this before installing GApps, not sure if this is related to Google Now Launcher FCs)
Click to expand...
Click to collapse
9. DT2W Workaround
Code:
echo 1 > /proc/touchpanel/double_tap_enable # do this on every boot
Then add this line to /system/usr/keylayout/Generic.kl:
Code:
key 255 POWER
DT2W has been added into settings since 20151027.
Click to expand...
Click to collapse
10. Apps Not Working
Settings -> Apps -> YOUR_APP -> Permissions -> Turn on everything
Click to expand...
Click to collapse
11. Fixing random freezes
http://forum.xda-developers.com/showpost.php?p=63378883&postcount=682
Thanks @The Dork Knight Rises
Click to expand...
Click to collapse
Now screenshot spoiler (with Google Now Launcher):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Discussion Thread:
http://forum.xda-developers.com/oneplus-one/general/discussion-homemade-android-6-0-t3227234
Download:
20151027
https://drive.google.com/file/d/0BwkmhbR5VHpAdWRxQ0ZraVgyT00/view?usp=sharing
Marshmallow's native DT2W setting (thanks CM)
USB MIDI support (What for?)
Fixed some crashes by removing SeempLog (try TiBu and network settings)
Double tap on Home key now brings up Recent View
Added a reboot option in power key menu/global actions menu
Note: if you have drain when NFC is on (or NFC setting is grayed out), please attach a logcat of booting process. I can not reproduce this on my phone... Thanks!
20151018
https://drive.google.com/file/d/0BwkmhbR5VHpAekdWT2NlVWNlNnc/view?usp=sharing
Mirror by @c43211 http://c43211.com/aosp_bacon-ota-eng.hamster-20151018.zip
Mirror by @Killer.shubham http://d-h.st/9fOO
Fixed network mode selection (2G/3G/4G switch)
Fixed network location
DT2W workaround: see Q&A
20151015
https://drive.google.com/file/d/0BwkmhbR5VHpAUVVDYkVJOFJoYVE/view?usp=sharing
Mirror by @itskapil at http://downloadmirror.co/android/tx/aosp_bacon-ota-eng.hamster.zip
Mirror by @Killer.shubham at http://d-h.st/3oBU
Mirror by @c43211 at http://c43211.com/aosp_bacon-ota-eng.hamster.zip
Thanks!
MAKE A BACKUP FIRST!
(I'm using TWRP 2.8.7.0 and it works well with this package.)
Sources:
Kernel: https://github.com/updateing/android_kernel_oneplus_msm8974 (marshmallow branch)
Device tree: https://github.com/updateing/android_device_oneplus_bacon
Blobs: https://github.com/updateing/proprietary_vendor_oneplus
local_manifest: http://www.hastebin.com/netamapate.xml
Hope you can enjoy the new feel of Marshmallow!
Wow! Need this rom to improve.
Excited flashing now!
Sent from my A0001 using Tapatalk
Finally the sweet taste of marshmallow on the OnePlus One!
Great work ! ^_^
Battery drains faster?
Guess I'll wait a little bit longer, as it's the main reason I wanna switch to M.
Kernel dilemma
If the kernel on it is based on cm 12.1 .. Can we flash any other kernels that work with CM 12.1? It should work or atleast i hope so! But yeah I'll try and get back!
Cheers! Keep up the good work!
Do we need to flash gapps & supersu?
Sent from my A0001 using Tapatalk
will it work with F2FS ? separate build would be helpful, if its not tested i will test it
---------- Post added at 11:06 AM ---------- Previous post was at 11:05 AM ----------
horizon_KJ said:
If the kernel on it is based on cm 12.1 .. Can we flash any other kernels that work with CM 12.1? It should work or atleast i hope so! But yeah I'll try and get back!
Cheers! Keep up the good work!
Click to expand...
Click to collapse
i guess it would be tweaked for more compatibility to android 6.0
Great work man !!
Anyone flashed it successfully?
Nice achievement! Glad to see you made it boot.
Finally the bacon.
Was almost regretting for getting this phone
~KV said:
Anyone flashed it successfully?
Click to expand...
Click to collapse
I'm on F2FS didn't tested it
Killer.shubham said:
I'm on F2FS didn't tested it
Click to expand...
Click to collapse
If you flashed it, go to terminal to see if it's on f2fs or not?
Finally ...!!!!
Will test soon ?
This Rom's developer is little busy so we should get other developers work on it and probably get this thread featured?
Tested and WORKING ( I don't if f2fs works)
as a reminder to everyone.. .NO ETA's pls. lets respect the dev.. compiling is already a good thing, and making it boot is a great achievement..
ianstump said:
Tested and WORKING ( I don't if f2fs works)
Click to expand...
Click to collapse
will report in 10 mins
1. flashing it without any custom kernel (probably wont work)
2.flashing rom zip + ak CAF kernel. (hoping for it)
..
Results
1. TWRP says no OS installed ( System is 22mb)
2.Flashing failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
temasek's UNOFFICIAL CM 13 BUILDS
This is the official maintainer thread for all current and future unofficial builds of CM-13.0; source-worked by @temasek; created for i9500 based on GearCM 13 by @Alberto96. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Device-specific Source code:
Device: https://github.com/GearCM/android_device_samsung_i9500
Kernel: https://github.com/GearCM/android_kernel_samsung_exynos5410l
Vendor: https://github.com/GearOMNI/proprietary_vendor_samsung
Download Links and Changelog
FAQ and Trouble Shooting
The lastest version of GearRecovery is recommended.
https://www.androidfilehost.com/?fid=24421527759883765
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Download latest version of SuperSU.
4. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. Flash the SuperSU. If you don't, you'll get bootloop.
10. WIPE DALVIK/CACHE (for good measure).
11. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
More:
@arter97
@temasek
@Alberto96
XDA:DevDB Information
Temasek's UNOFFICIAL CyanogenMod 13.0 I9500, ROM for the Samsung Galaxy S4
Contributors
faizauthar12, zozoz13
Source Code: https://github.com/temasek
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-03-04
Last Updated 2016-10-11
Main Download [Click here]
OpenGApps [6.0] [Click here]
SuperSU [Click here]
Build Version: V11
For the most up to date changelog please visit:
Temasek’s CM-13.0 Github Commits
If there a procedure that i should follow in order to have a clean base to start from?
Yes, follow this procedure and you shouldn't have any issue.
Flash latest Stock ROM Odin package | http://www.sammobile.com/firmwares/download/55812/I9500XXUHOH7_I9500MBCHOF1_MBC | using latest Odin3 Flasher | http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361 | and Standard (not Chinese) .pit file. | http://forum.xda-developers.com/attachment.php?attachmentid=2343320&d=1382462885 |
After First Boot, Shutdown your device and Boot into recovery mode using 3 buttons combo (Volume +, Home, Power)
Wipe Data/Factory Reset using Volume Keys and Power Button (on Stock Recovery)
Flash latest TWRP 2.8.7.0 | https://dl.twrp.me/i9500/twrp-2.8.7.0-i9500.img.tar | using Odin3 | previously linked | (Untick Auto Reboot to avoid any issue)
Shutdown your device (pull off your battery)
Boot into recovery mode using 3 buttons combo | Volume +, Home, Power | (TWRP will boot now)
Flash latest GearRecovery (on TWRP)
Reboot into recovery mode using TWRP on-screen buttons | Home => Reboot => Recovery | (GearRecovery will boot now)
Clean completely your device (Format Data and Wipe All Partitions)
Reboot into recovery mode as did before (GearRecovery will boot again now)
Flash latest GearCM ROM
Home => Reboot => System
Where is "Developer Options" category?
To activate 'Developer Options' category in Settings you need to tap 7 times on 'Build number' located into Settings -> About Phone.
What can i do to fix VOIP audio calls?
There's not a real fix yet, so i found this useful workaround that could help you.
If you need to make a VOIP call:
1) Play something using stock music player (also third-party music players SHOULD be fine)
2) Do not pause audio playback
3) Make a call using your preferred VOIP app.
Or you can just use a Wired Headphone/Headset | BT Headphone/Headset.
This workaround should work also for incoming VOIP calls.
How can i solve problems with Hebrew language?
Go to "Developer Options" in Settings and check "Force RTL layout direction".
What can i do to reduce the "echo effect" while in-call?
Try to reduce in-call earpiece volume (if possible). Shouldn't be required on latest builds.
I'm having problems with battery life, what can i do?
1) Use "Greenify" to hibernate all apps with a "little cloud + 'Gcm' word inside" on the right of each app's name. Donation version is recommended because it allows deeper hibernation of apps
2) Disable "Location" or set it to mode "Battery Saving" (Settings -> Location)
3) Make sure that your 2G/3G mobile network signal level isn't always low or unstable
4) Deny "Wake Up" and "Keep Awake" permissions to Google and third-party apps. (Settings -> Privacy -> Privacy Guard -> Press menu button and check "Show built-in apps" -> Press menu button again and go to Advanced -> Horizontal Scroll to Device)
5) Disable "Sync" or sync only useful stuff like Contacts
6) Disable "Auto-rotate screen" (Settings -> Display & lights -> Rotation)
7) Use one of the latest Modem/Baseband listed on first post.
8) Disable Ambient Display
9) Install Xposed Framework and configure Amplify
If this isn't enough then replace your battery and/or reduce your phone usage. :silly:
Why is my phone over-heating while playing heavy-games or running heavy-apps?
Use a bit your brain to explain why. High CPU and GPU usage = high heat production. Your phone will automatically throttle CPU when needed so don't worry, it is safe and normal.
Can I use another kernel instead of the one included in the zip?
No. Only use the included kernel for 100% compatibility, bug reports with non-standard kernel will be ignored.
Can i disable S-View cover features (lock/unlock)?
Not yet.
*** IR Remote app isn't working anymore/was working on previous builds/causes my phone to crash, what can i do?
Contact *** IR Remote app developer.
- Same as GearCM 13 -
If you are experiencing any issues and have performed a dirty flash, please try a clean flash prior to posting your question. Thank you!
If you have an issue and want require help, please submit a kmsg log with the following information:
Note: Do not pull out battery or else no log; this log can be located at: /proc/last_kmsg
When Possible, Please Include:
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel version/Build, etc.).
Please read all of the OP before you post. Do not report issues on previous builds only on the latest.
#reserved
nice.. downloading
keep it up @faizauthar12
Wow! Thanks so much @faizauthar12 i love temasek roms.
If possible then compile a test version with 6.0.1.
robsonsilva said:
Wow! Thanks so much @faizauthar12 i love temasek roms.
If possible then compile a test version with 6.0.1.
Click to expand...
Click to collapse
I will try
faizauthar12 said:
I will try
Click to expand...
Click to collapse
Not hurry. Thank you for bringing a new rom for the i9500. I hope you do not leave us.
I install latest supersu, but Titanium not working, when reboot devide not boot up + at first boot i have eror of gapps (i installed pico from opengapps)
olegas94 said:
I install latest supersu, but Titanium not working, when reboot devide not boot up + at first boot i have eror of gapps (i installed pico from opengapps)
Click to expand...
Click to collapse
What have you done before you reboot the device? And Titanium backup working finely here after flash latest SuperSU.
Did you mean Google play services has stopped message? Just ignore the message. GApps just working as it should.
Sent from my Galaxy S4
:::fajri13::: said:
What have you done before you reboot the device? And Titanium backup working finely here after flash latest SuperSU.
Did you mean Google play services has stopped message? Just ignore the message. GApps just working as it should.
Sent from my Galaxy S4
Click to expand...
Click to collapse
I tried restore apps with titanium, it is not work. After that I disable separate mount namespace in supersu settings and reboot device.
olegas94 said:
I tried restore apps with titanium, it is not work. After that I disable separate mount namespace in supersu settings and reboot device.
Click to expand...
Click to collapse
I suggest you to reinstall the ROM. Try this steps:
1. Boot to recovery, Wipe System, Data, Dalvik & Cache.
2. Flash the ROM, then GApps.
3. Flash SuperSU v2.49.
4. Reboot the device.
It should fix your issues.
ALERT: OP doesn't have any permission to build this ROM using my Sources.
Alberto96 said:
ALERT: OP doesn't have any permission to build this ROM using my Sources.
Click to expand...
Click to collapse
Sorry, mate. Few months ago, I have asked permission to you from PM...but, i've delete the message by my mistake. You can check my message in your PM list.I still remain it
U said if I have the device soo ,my friend test it (cuz he want temasek) he told me to use ur. But if you don't give permission, I will close this thread to respect you.
I'm sorry
You right, it's been 4 months from your request that's why i forgot about it.
Excuse me then.
OP has permissions to use my GearCM sources.
Any feedback? 45 people has downloaded it, but no one give any feedback ?
:::fajri13::: said:
Any feedback? 45 people has downloaded it, but no one give any feedback
Click to expand...
Click to collapse
Sorry for that. The battery was drained faster than I could bare, so it stayed only for couple hours. Any suggestion how to stop the drain? I'll be happy to retry it, coz all functions worked fine with sufficient features which also worked flawlessly.
fariez said:
Sorry for that. The battery was drained faster than I could bare, so it stayed only for couple hours. Any suggestion how to stop the drain? I'll be happy to retry it, coz all functions worked fine with sufficient features which also worked flawlessly.
Click to expand...
Click to collapse
Look at 2nd post. There are tips that you can follow to reduce battery drain. And you can also use Synapse to underclock the CPU/GPU and disable 'l2_hsic' wakelock and Arch mode that would improve battery life. Anyway, I myself doesn't have huge battery drain. I only use Greenify with Xposed help.
:::fajri13::: said:
Look at 2nd post. There are tips that you can follow to reduce battery drain. And you can also use Synapse to underclock the CPU/GPU and disable 'l2_hsic' wakelock and Arch mode that would improve battery life. Anyway, I myself doesn't have huge battery drain. I only use Greenify with Xposed help.
Click to expand...
Click to collapse
I didn't flash GApps, so I don't think I need Xposed and Greenify/Amplify, other steps on the Q&A were always my SOP after installing any ROM.. So, I'll try your l2_hsic and Arch mode tricks. Other than battery drain the ROM was an excellent work.:good:
Hmm
Am using linaro(temasek prebuilt it)
Is it cause battery drain?
What's working:
* Boots
* Wi-Fi
* Bluetooth
* NFC
* GPS
*Camera
* Sensors
* RIL
* Video Playback
* Deep Sleep
* Internal Storage
* Micro SD
* Audio
* Thermal Management
* Brightness (auto and manual)
* Enforcing SELinux + user build
What's not working:
Unknow
What I don't know:
* Anything else I haven't mentioned
:fingers-crossed::fingers-crossed::fingers-crossed:
Attend: If you cannot use the built-in file manager to install the software, open the file manager, click the menu button in the upper right corner, and click to display the internal storage device. Then you can install the software normally.
I haven't done in depth testing to find all the bugs, so any input on the matter is much appreciated (with logs).
I have noticed that Oreo is much smoother and more responsive when compared to Nougat.
MAKE SURE YOU ARE ON TWRP 3.2.1, NOT OFFICIAL TWRP, OTHERWISE THE FLASH WILL FAIL.
TWRP-3.2.1
Hopefully, one of these days I will compile clean TWRP-3.2.1 from source, but for now, this should work.
GApps (Please select ARM 8.1)
Magisk
Build:
05-02
INSTALLATION
1.Unlock Bootloader, throw ROM at the Internal Storage or SD card
2. Install TWRP Recovery 3.2.1
3. Boot to Recovery
4. Wipe Cache,Wipe Data,Wipe System and Wipe ART/Dalvik cache
5. Install the ROM
6. Install Gapps
7. Install SuperSU or Magisk
8. Done!
How to used GSM or 3G?
Enter *#*#4363#*#* in the dial
Select the first option
Choose only WCDMA
Open the flight mode
Turn off the flight mode again
Source:
To be determined
Contributors:
*rcstar6696
*SuperLamic
*AdrianDC
*drakonizer
* Lineage OS team
*All the other contributors to sony msm8974 platform
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP + CAF
Version Information
Status: beta
Created 2018-05-02
国人可以去国内的论坛
http://bbs.gfan.com/android-9292697-1-1.html
Will this ROM support sony stock camera?
https://forum.xda-developers.com/cr...s-apps/port-stock-camera-nougat-roms-t3628791
Nice
Oreo again. First, I'll try then tell you what not working are.
Is TWRP 3.2.1 support installation of AICP 8.1?
Some problems I've found:
1. Stock music player can't play track. But it's okay while open audio from file app with "open with music". I'm using Poweramp to play music.
2. 3G only signal not stable. Sometimes it's reset automatically.
3. I opened SMS on notification but still marked unread when back to inbox.
4. I copied files with xplore but icon and file size not updated.
5. Storage need ejected to update size after deleting folder with many files. (Am I wrong? Will MTP host do the same?)
Where can I found light setting to make mod color notification per app?
Keep working, dude! I think it would be the best ROM for amami. Ganbatte!
Hi
i flash this rom 2 days ago and i see some bugs as i say them below. i hope it help you to repair and update the rom
1) there is a big problem with this ROM! i can't play videos on instagram!
2) my phone rebooted ONE time when i was playing music and turned off the screen!
3) I can't install some apps when i download them from websites!
4) i believe the battery drains fast!
paroucia said:
1) there is a big problem with this ROM! i can't play videos on instagram!
Click to expand...
Click to collapse
Try disabling HW overlays in developer settings.
Remim7 said:
What's working:
* Boots
* Wi-Fi
* Bluetooth
* NFC
* GPS
*Camera
* Sensors
* RIL
* Video Playback
* Deep Sleep
* Internal Storage
* Micro SD
* Audio
* Thermal Management
* Brightness (auto and manual)
* Enforcing SELinux + user build
What's not working:
Unknow
What I don't know:
* Anything else I haven't mentioned
:fingers-crossed::fingers-crossed::fingers-crossed:
Attend: If you cannot use the built-in file manager to install the software, open the file manager, click the menu button in the upper right corner, and click to display the internal storage device. Then you can install the software normally.
I haven't done in depth testing to find all the bugs, so any input on the matter is much appreciated (with logs).
I have noticed that Oreo is much smoother and more responsive when compared to Nougat.
MAKE SURE YOU ARE ON TWRP 3.2.1, NOT OFFICIAL TWRP, OTHERWISE THE FLASH WILL FAIL.
TWRP-3.2.1
Hopefully, one of these days I will compile clean TWRP-3.2.1 from source, but for now, this should work.
GApps (Please select ARM 8.1)
Magisk
Build:
05-02
INSTALLATION
1.Unlock Bootloader, throw ROM at the Internal Storage or SD card
2. Install TWRP Recovery 3.2.1
3. Boot to Recovery
4. Wipe Cache,Wipe Data,Wipe System and Wipe ART/Dalvik cache
5. Install the ROM
6. Install Gapps
7. Install SuperSU or Magisk
8. Done!
How to used GSM or 3G?
Enter *#*#4363#*#* in the dial
Select the first option
Choose only WCDMA
Open the flight mode
Turn off the flight mode again
Source:
To be determined
Contributors:
*rcstar6696
*SuperLamic
*AdrianDC
*drakonizer
* Lineage OS team
*All the other contributors to sony msm8974 platform
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP + CAF
Version Information
Status: beta
Created 2018-05-02
国人可以去国内的论坛
http://bbs.gfan.com/android-9292697-1-1.html
Click to expand...
Click to collapse
Thanks, great job. A question. Does the nfc really working? I mean can i use this rom if i want to pay with my phone (paypass)?
Sent from my D5503 using XDA Free mobile app
pcz said:
Thanks, great job. A question. Does the nfc really working? I mean can i use this rom if i want to pay with my phone (paypass)?
Click to expand...
Click to collapse
Yes is Google Pay via nfc working?
Video recording not working
Hi, thank you for a very smooth ROM
For me camera aplication freezes whenever I try to record video.
I have installed via TWRP 3.2.1-0 from other thread, maybe that's the reason?
Thanks
I went back to LineageOS 12.1 and found the videos that were recorded by 15.1, they only have the first image in (the image it freezes on when hitting video record).
in this thread they have working video recording: https://forum.xda-developers.com/showpost.php?p=76448953&postcount=87
but maybe it is just reposting of newer Remim7 work...?
Remim7 said:
Build:
05-02
http://bbs.gfan.com/android-9292697-1-1.html
Click to expand...
Click to collapse
New Build:
05-29
From:
http://bbs.gfan.com/android-9292697-1-1.html
GazCore said:
New Build:
05-29
From:
http://bbs.gfan.com/android-9292697-1-1.html
Click to expand...
Click to collapse
is it still in beta?
Your link is still to the older 05-02 version... thank you
GazCore said:
New Build:
05-29
From:
http://bbs.gfan.com/android-9292697-1-1.html
Click to expand...
Click to collapse
_Pano_ said:
is it still in beta?
Click to expand...
Click to collapse
yes
Samwei14 said:
Your link is still to the older 05-02 version... thank you
Click to expand...
Click to collapse
I edited it.
is this ROM ready for daily use? Mine is running a stock unbrandized 5.1.1 but I'm having troubles, not sure if the reason is the unbrand... Since is my mother's primary phone I'm looking something that works fine in the basic tasks (camera, phone, whatsapp, maps, web), I will not give root access.
francesko94 said:
is this ROM ready for daily use? Mine is running a stock unbrandized 5.1.1 but I'm having troubles, not sure if the reason is the unbrand... Since is my mother's primary phone I'm looking something that works fine in the basic tasks (camera, phone, whatsapp, maps, web), I will not give root access.
Click to expand...
Click to collapse
I have flashed the build as at 29-05 it and I can confirm camera works (taking photos and recording video - slightly lower quality than stock, maybe we will get stock camera hal later),
what others noticed - SMS opened from notification stays marked as unread, needs to be open in SMS app to be marked read, problems with 3G signal - didn't notice, file size reporting - could not test,
calling - I had no problems, whatsapp works, maps no problem, installed google chrome - didn't notice any problems.
Maybe you can give it a month or two and it will become even more stable, but for me it is the best and most up to date ROM after Lineage OS 12.1 with security patches (5.1.1 Lolipop) I found in other thread... thanks @GazCore for finding the new build and making it available
Has anyone been able to install Magisk and have it pass SafetyNet checks on this? I can't even get it to pass basicIntegrity.
scanz said:
Has anyone been able to install Magisk and have it pass SafetyNet checks on this? I can't even get it to pass basicIntegrity.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
etram said:
There's no LTE, 3G or 2G.
Can someone help me, please ?
Click to expand...
Click to collapse
I haven't noticed problems with the latest build (29-05). Data (LTE, 3G) and calling (2G) works. Which build are you using? Is your APN configured correctly?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features
Lots of goodies. Working to add more.
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM: AndroidFileHost
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your Honor 5x, or coming from another ROM:
** Make sure you're running a proper working Recovery such as TWRP
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
SELinux is PERMISSIVE
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- AOSP
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
Join us on Telegram!
crDroid Community: https://t.me/crDroidAndroid
crDroid G+ community
XDA:DevDB Information
crDroidAndroid, ROM for the Honor 5X
Contributors
coldhans
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock MM Firmware (No VoLTE)
Based On: LineageOS
Version Information
Status: Nightly
Current Stable Version: 5.1
Stable Release Date: 2019-03-12
Created 2019-02-07
Last Updated 2019-03-12
Reserved
Website: https://crdroid.net/kiwi
Reserved
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/9.0/changelog_kiwi.txt
Installing this right now
You're great man
---------------------------------------------------------------------------------------------------
Clean Installed it just now:
- First boot-up tooook much longer than what I've usually seen.
- Setup wizard was unable to move on when I tried to continue using Mobile Data. ( It stock at turning mobile data ON, when I skipped the Setup Wizard I noticed that APN was missing.)
- Fingerprint Enrollment was not Complete.
---------------------------------------------------------------------------------------------------
After A reboot still cant enroll finger print
and default music player is not usable because it keeps flashing the screen and I cant see anything.
Logs r attached.
everything work fine except Fingerprint Enrollment
nourpon said:
everything work fine except Fingerprint Enrollment
Click to expand...
Click to collapse
all what you need to do mate is the following (requires ROOT)
1-find yourself a good ROOT file explorer (Mine is ES)
2-navigate to data/system/users and delete fpdata folder
3-(no need to restart the device) go to setting app then security then fingerprint and try enrollment it may fall to complete about 1-3 times but it should be done easily after that
try that and tell me if it didn't work for you
GEKv2 said:
all what you need to do mate is the following (requires ROOT)
1-find yourself a good ROOT file explorer (Mine is ES)
2-navigate to data/system/users and delete fpdata folder
3-(no need to restart the device) go to setting app then security then fingerprint and try enrollment it may fall to complete about 1-3 times but it should be done easily after that
try that and tell me if it didn't work for you
Click to expand...
Click to collapse
Thank you for the tweak, it work fine now
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
@coldhans will you update regularly this ROM ?
thank you for answer
greatwork ，crdroid is alwyas my daily rom。
wish better
and my bugs as follows：（kiwi-tl00）
same imei & always 50% battery display
GEKv2 said:
all what you need to do mate is the following (requires ROOT)
1-find yourself a good ROOT file explorer (Mine is ES)
2-navigate to data/system/users and delete fpdata folder
3-(no need to restart the device) go to setting app then security then fingerprint and try enrollment it may fall to complete about 1-3 times but it should be done easily after that
try that and tell me if it didn't work for you
Click to expand...
Click to collapse
this solution did not work, neither did the solution provided in here:
https://forum.xda-developers.com/showpost.php?p=78655571&postcount=204
KingJK said:
this solution did not work, neither did the solution provided in here:
https://forum.xda-developers.com/showpost.php?p=78655571&postcount=204
Click to expand...
Click to collapse
Youi just need to insist many times and it's work
nourpon said:
Youi just need to insist many times and it's work
Click to expand...
Click to collapse
It's just not worth it, I tried both solutions more than 5 times and kept restarting the device the suggested amount. It's killing the time, I went back to Arrow
path
GEKv2 said:
all what you need to do mate is the following (requires ROOT)
1-find yourself a good ROOT file explorer (Mine is ES)
2-navigate to data/system/users and delete fpdata folder
3-(no need to restart the device) go to setting app then security then fingerprint and try enrollment it may fall to complete about 1-3 times but it should be done easily after that
try that and tell me if it didn't work for you
Click to expand...
Click to collapse
* 2-navigate to data/system/users/0 and delete fpdata folder
Dirty flashed from crDroid 8.1.
As for now - no single issue Great job!
Hello,
i did fix fingerprint enrolmetnt issue this way:
1 reboot to TWRP mode
2 invoke file editor
3 delete files/folders:
/data/fpc
/data/system/locksettings.db
/data/system/users/0/fpdata
/data/system/users/0/settings_fingerprint.xml
4 reboot to system
5 tap the "Continue (filinalze) phone setup on top of system settings GUI
6 select PIN+Fingerprint unlcock mode and continue as normal
Regards,
Dmitri.
Dmitri_01 said:
Hello,
i did fix fingerprint enrolmetnt issue this way:
1 reboot to TWRP mode
2 invoke file editor
3 delete files/folders:
/data/fpc
/data/system/locksettings.db
/data/system/users/0/fpdata
/data/system/users/0/settings_fingerprint.xml
4 reboot to system
5 tap the "Continue (filinalze) phone setup on top of system settings GUI
6 select PIN+Fingerprint unlcock mode and continue as normal
Regards,
Dmitri.
Click to expand...
Click to collapse
the simple way to honor 5x is to erase as root "data/system/users/0/fpdata" only once and then register the used fingerprint pattern and fingerprint and that's it.
how about buttery drains and performance in this rom combring it with cr 7.1.2
MOHAMED BEK said:
how about buttery drains and performance in this rom combring it with cr 7.1.2
Click to expand...
Click to collapse
For me it works just fine. I use it now as daily driver. Works better than crDroid on Android 8.1.
There is still issue, that only first SIM can run on LTE/4G. Second can run only EDGE. Changing SIM for data transfer doesn't help - only disabling the Sim used for data transfer allows to operate second Sim on LTE profile. I think the second Sim becomes then first reported to networking subsystem, so it is being allowed to use LTE profile. Even if You re-enable the first one, it is being reported as second Sim so it gets only edge profile.
Would it be possible to force reinitialisation of Sim cards when changing the Sim for data transfer? I think this way is operating stock software...
Cheers ?
Marcin
thanks so much
2/16 OTA update is out
Download: AFH | MEGA
Changelog: https://raw.githubusercontent.com/c...9b945aec31b8a6513e8a9cd703/changelog_kiwi.txt
coldhans said:
Download: AFH | MEGA
Changelog: https://raw.githubusercontent.com/c...9b945aec31b8a6513e8a9cd703/changelog_kiwi.txt
Click to expand...
Click to collapse
just popup to twrp after flashing the 20190216 ver
it was normal during the former ver.s
and the bugs i come to：1.same imei when two sims；2.50%battery always ，（Chinese kiwi-tl00）3.the options in the expanded desktop cannot be displayed4.the castscreen seemed abnormal
================================
after i wipe the data ，it come home....（twrp cannnot be touchble when the issue）
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
Gapps (Download from here)
Magisk 24.1 or newer for root - (Download from here)
First time installation:
Flash stock FW 11.0.4.0 (if you have not done so again)
Boot to TWRP via fastboot
Format data
Flash the ROM zip and the TWRP installer zip
Reboot to recovery
Flash Gapps (Optional)
Flash Magisk (Optional)
Format data
Reboot to system
Update installation:
Go to Settings -> System -> Updater and check for updates
Click "Download" and select "Install" once that is done
Install Magisk to other slot from the Magisk app (if you have it)
Press "Reboot" to continue
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Kernel URL
Device tree: Device Tree
Vendor tree: Vendor
Download:
ROM: https://crdroid.net
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.1/changelog_daisy.txt
Known issues:
- Flashlight is dead in some apps. This is because Xiaomi camera blobs have issues with Camera2API (HAL3) which is enabled by default, as per A12's requirements.
- Some videos (.webm files) will not play correctly. This is due to some underlying issue with the hardware VP9 decoder
Visit official website @ crDroid.net
crDroid Daisy Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Thanks! That's why. I really appreciate your work.
Download link doesn't work for now, should be fixed soon
Links are up and working, sorry for any inconveniences
Nice rom... Thanks, Dev for keep supporting this device..
New update is up fixing a bunch of issues reported in the previous build
Changelog:
* Resolved some sepolicy issues
* Fixed dual SIM RIL issues
* Fixed the goodix cleaning script
* Fixed the HAL switch once again
* Fixed hotspot bricking WiFi after it was turned off
* Notable kernel changes (from before):
- Upstreamed to 4.9.299
- Some scheduler changes to improve interactivity
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Irish_Dude said:
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Click to expand...
Click to collapse
I'll try this rom... giver further feedback about this.
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
NiKabir said:
I'll try this rom... giver further feedback about this.
Click to expand...
Click to collapse
This ROM is 1st class
Ahhhh perfect.
I clean installed this rom yesterday and so far loved it. With linked gapps.
It has been very smooth and bugless.
Battery consumption looks very good, let's see it in a few more days.
The camera, however, is very simple and doesn't have normal options such as panorama.
I don't know if we can have another camera version flashable.
ardanai said:
Ahhhh perfect.
I clean installed this rom yesterday and so far loved it. With linked gapps.
It has been very smooth and bugless.
Battery consumption looks very good, let's see it in a few more days.
The camera, however, is very simple and doesn't have normal options such as panorama.
I don't know if we can have another camera version flashable.
Click to expand...
Click to collapse
Okay, I got it. hahaha
I have installed GCAM and everything looks great now.
Irish_Dude said:
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
This ROM is 1st class
Click to expand...
Click to collapse
You can use battery saver I guess, but there is no way to explicitly remove only that vibration
Irish_Dude said:
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Click to expand...
Click to collapse
If by the keypad you mean the Gboard (Google keyboard): you can go to Gboard preferences and turn off "haptic feedback on keypress"
If you mean the navigation buttons: Accessibility > vibration & haptic strength > touch feedback > off
LinkBoi said:
New update is up fixing a bunch of issues reported in the previous build
Changelog:
* Resolved some sepolicy issues
* Fixed dual SIM RIL issues
* Fixed the goodix cleaning script
* Fixed the HAL switch once again
* Fixed hotspot bricking WiFi after it was turned off
* Notable kernel changes (from before):
- Upstreamed to 4.9.299
- Some scheduler changes to improve interactivity
Click to expand...
Click to collapse
Hi LinkBoi,
Is it possible (if you have time) to make a flashable zip of Gcam for twrp to replace the original Camera? without root
LinkBoi said:
First time installation:
Flash stock FW 11.0.4.0 (if you have not done so again)
Boot to TWRP via fastboot
Format data
Flash the ROM zip and the TWRP installer zip
Reboot to recovery
Flash Gapps (Optional)
Flash Magisk (Optional)
Format data
Reboot to system
Click to expand...
Click to collapse
Hi, just to confirm.. The first "format data" includes system as well or just the "data" check box ?
and if so, could please explain why not system ? Thank you.
savvyyy said:
Hi, just to confirm.. The first "format data" includes system as well or just the "data" check box ?
and if so, could please explain why not system ? Thank you.
Click to expand...
Click to collapse
I believe that is "format data" before you enter to the advanced wipe like wipe system and wipe data.
ardanai said:
Hi LinkBoi,
Is it possible (if you have time) to make a flashable zip of Gcam for twrp to replace the original Camera? without root
Click to expand...
Click to collapse
No, install it normally
Hello and thank you for your work. I have a bug to report about incoming calls. When I get a call, phone rings as it should be but sometimes screen does not wake up on its own and if I try to wake it up manually with power button, the call disappears entirely. Phone keeps ringing but other than that the call can not be seen on the screen. After the caller hangs up I get the "missed call" notification. This happens not so rarely so it kinda makes the rom unusable for me. Funny thing is that same problem happened with some other roms as well both android 11 and 12 builds. I tried to find a solution for this online but I could not find anything, am I the only one who is having this problem?
Mantarsote said:
Hello and thank you for your work. I have a bug to report about incoming calls. When I get a call, phone rings as it should be but sometimes screen does not wake up on its own and if I try to wake it up manually with power button, the call disappears entirely. Phone keeps ringing but other than that the call can not be seen on the screen. After the caller hangs up I get the "missed call" notification. This happens not so rarely so it kinda makes the rom unusable for me. Funny thing is that same problem happened with some other roms as well both android 11 and 12 builds. I tried to find a solution for this online but I could not find anything, am I the only one who is having this problem?
Click to expand...
Click to collapse
I face this issue yesterday..
NiKabir said:
I face this issue yesterday..
Click to expand...
Click to collapse
So it is not just me Still it is a bit weird that no one hardly ever mentioned this in andriod 11 builds.