HELP - Can't relock bootloader - One (M8) Q&A, Help & Troubleshooting

Originally unlocked bootloader through HTC-DEV
CID: 11111111
Hboot 3.19.0.0000
Radio-1.2121331147A1.19_2G
M8_UL_CA PVT SHIP S-OFF
I'm trying to relock the bootloader so I can RUU, however keep getting the following error when running "fastboot oem lock"
Code:
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -131073 (0xFFFDFFFF)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id
0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.230s
After the above message, the phone goes from unlocked -> relocked. However I believe the phone is still actually unlocked because I'm getting Error: 155 when I try to run an RUU. I also can see the red text on the charging screen indicating the phone is unlocked.
I have also used this method http://forum.xda-developers.com/showthread.php?t=2708571 to try unlock/relock, and also tried to relock and use HTC-DEV to lock but no matter what, I'm still getting Error 155.
Also, none of the user data is being wiped when I use fastboot flash unlocktoken Unlock_code.bin

blazerxzero said:
Originally unlocked bootloader through HTC-DEV
CID: 11111111
Hboot 3.19.0.0000
Radio-1.2121331147A1.19_2G
M8_UL_CA PVT SHIP S-OFF
1. I'm trying to relock the bootloader so I can RUU, however keep getting the following error when running "fastboot oem lock"
2. After the above message, the phone goes from unlocked -> relocked. However I believe the phone is still actually unlocked because I'm getting Error: 155 when I try to run an RUU. I also can see the red text on the charging screen indicating the phone is unlocked.
Click to expand...
Click to collapse
1. You don't need to relock bootloader to run RUU on S-Off device.
2. Are you trying to run Marshmallow RUU ? You'll get error 155 if the current firmware is lower than Marshmallow. You need to flash its Marshmallow firmware first then run RUU.

Thanks for the reply, I tried your method of matching the RUU with the firmware version and got a different error.
Error couldn't allocate space, even though the RUU image was smaller than the available storage.
The solution which resolved the problem was to rename the correct RUU version zip load onto SD card and flash using the bootloader auto-detection method.

Related

[Q] Stuck in RUU [HELP PLEASE!]

Dear developers,
I got a problem, there were a lot of things I could help my self with but now i'm stuck.
My HTC Desire Z won't boot... I can't flash anything to my phone because the bootloader is locked and I can't find a official RUU that would help me out.
I tried to boot in fastboot and I get the HTC logo with in every corner an exclamation, when I disconnect the phone I get the following screen:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.51.26
eMMC-boot
Apr 11 2011,23:36:27
RUU
- no reboot possible
- screen says RUU (when plugged in, RUU USB)
- can't find device with adb devices
- can find device with fastboot devices
- not possible to make goldcard, because no adb connection
- running new RUU didn't work either (because I can't find a RUU for 2.42.405.5)
I have no solution, can someone please help me?
------- Update
I have a gold card using another phone
If I now just try to flash something on my phone I get a signature error
What happened around the time your phone stopped booting? Did you go to HTC website to get the latest ruu from them? Also boot back to fastboot and try
fastboot check_emmc_mid
Sent from my Nexus 7 using xda premium
On the HTCDev.com I can vind a RUU for software version: 2.42.405.2 but I have 2.42.405.5
Now I tried the command: fastboot oem check_emmc_mid and get the output:
...
(bootloader) Manufacturer ID, MID=45
(bootloader) eMMC should be Sandisk
OKAY [ 0.009s]
finished. total time: 0.010s
I don't understand anything about it, I hope you do
And I tried a the command: fastboot oem boot and than I get the output:
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D0878FC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25209
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__E11
(bootloader) setting->cid::HTC__E11
(bootloader) serial number: SH0BNRT08614
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =496
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.10.51.26 androidboot.c
(bootloader) id=HTC__E11 androidboot.batt_poweron=die_battery androidboot
(bootloader) .carrier=HTC-Dutch androidboot.mid=PC1011000 androidboot.key
(bootloader) caps=qwerty androidboot.mode=normal androidboot.serialno=SH0
(bootloader) BNRT08614 androidboot.bootloader=0.85.0013 zygote_oneshot=of
(bootloader) f kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:27964 msec
FAILED (status read failed (Too many links))
finished. total time: 7.423s
And mij device gives a normal boot logo (the white one instead of the black one with the "!" in every corner)
Just wanted to se which emmc you had as one is prone to failure, you do have a good one though!
Now its all about finding the right bit to flaash for you which may be a bit hard as unrooted and bootloader locked phones only allow new os versions to be flashed. I won't be near a computer for a while but when I get back ill try to dig up a file for you
Sent from my SGH-T839 using Tapatalk 2
if you would like to do I'd be very grateful!
yeah seems like you have the latest version right now other than the latest g2 ruu but you dont have super cid so you wont be able to flash that either
do you remember what happened when your phone stopped working? may help figure this out.
also just for fun what output do you get when you type this in fastboot
fastboot flash system system.img
dont worry that there is no image, im more concerned if your current bootloader will allow you to do this, i doubt it but why not
also check this
fastboot oem partition_test all
Like evry other flash I try:
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
and the output of the partiton test:
(bootloader) [ERR] Command error !!!
I think the phone does not flash because the bootloader is locked? (S-ON)
I do not know how the device can not work anymore, I've bought via ebay ...'m a bit ripped off because it said that the phone worked
yeah a bit ****ty of whomever sold it to you, id try for a refund!
i take it you tried the basic stuff like booting to recovery and doing a factory reset?
this is real annoying too being without knowing the cause and having such limited access its hard to fix this thing, one of those deals where if i had it in front of me i think i could figure it out! but really you are going to need an updated ruu signed by htc to get this thing up and running if all the simple fixes havent worked... i guess you can see if debugging will work in recovery mode? if so then should still be fixable...
I tried a lot, can't boot to recovery because there is no.
it automaticly boots into RUU mode and if i try to boot it in to bootloader, system or recovery it stuck at the HTC logo.
How can I debugg the device? I know how to debug C# applications with Dot Net but a simple android phone is a lot harder
I could send my phone to your house if u think that would help?
Problem solved! partially i used a RUU from asia with a higher Version
dont send me the phone i live far away, send it back to whoever sold it to you and get the refund. hell ill sell you one that does work!
by debugging i meant to see if it were turned on on the phone, this is what allows for adb to work where you do the debugging. adb wont work in bootloader/fastboot mode, only in os and recovery. but again the problem is you can flash a recovery or os being you have a locked/shipped bootloader, the only thing to do at this point is to work with the limited fastboot commands you have or install a PC10IMG.zip, again the problem with this is they have to be signed by htc and be of a new version then your phone thinks you have installed... kinda stuck without some nicer options
Oh, I had forgotten that "adb" for android debugging bridge stands.
I do not have adb access only fastboot access, and a PC10IMG.zip does not work,like you already said it needs to have a htc signature.
Sending my phone to you was a joke.
But it is now almost entirely successful. I have an official RUU software used with a higher number, I had 2.42.405.5 and I have set up a foreign RUU and it worked "HTC Asia WWE 2.42.707.3"
I now have at least access to the HBoot, now I'll have to see how I can get S-OFF. flashing and "get_identifier_token" are still not working
Awesome news! So as of right now you have a stock ROM/Hboot/recovery?
If that is the case go right over to the xda wiki for the vision and root your phone with gfree!
Do it now before anything else brakes! Once you root (only use gfree method laid out in wiki) then everything else will be easy! Let me know how things go or if you need a hand!
*can't believe I glossed over that ruu!
Sent from my Nexus 7 using xda premium
He does not work well, he gets stuck on the normal boot logo.
If I run fastboot reboot bootloader he walks onto the boot screen. Install another RUU does not work, it stuck on "wait for bootloader"
Now the option "Image CRC" is added to the HBOOT menu, and I ran a factory reset that fails, that is what crashed my phone
can you post everything on your new hboot screen here? also everything that image crc says or any other options that may have appeared. also does it let you boot to a recovery?
Code:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011,23:36:27
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
crc output:
7 times vibrate
Code:
calculating... please wait
osbl: 0x7EE4ED8C
amss: 0x0
hboot: 0x887F7ABB
boot: 0x0
recovery: 0x0
system: 0x0
Press power key to go back.
I could get into recovery but after I did the factory reset (what went wrong) I can't. I can only get into the bootloader by "VOL-" and "POWER" but if I from fastboot reboot-bootloader command doing he stack onto the HTC logo.
well according to this you have no system, kernel or recovery installed right now just a locked bootloader with all security flags on.
can you try another ruu, or flash the same one again? also look in here nipqer made these and they may help you out... actually he or ghul would be very helpful on this unless you can wait longer, i have some things im working on right now and i can look this over again tonight when i have some more time.
see if you can find them or another helpful one at FREENODE make a name and join #g2root
Yeah, yesterday I was @ the chat on freenode, they told me to try the asian RUU (a) I'll try the DZ_PC10IMG.zip form your link and if that doesnt work I'll wait for the next option
Thanks a lot!
I can't flash any RUU because after the command "reboot bootloader" he keeps waiting for the bootloader but the device gets stuck on the htc logo and doesn't boot to the bootloader, even if I set it from "VOL UP" + "POWER" to the bootloader the RUU installer status remains: "Waiting for bootloader"
After entering the bootloader menu is scans the SDCARD and finds the PC10IMG.zip
telling me: loading...[PC10IMG.zip], after that it's saying: Checking..[PC10IMG.zip].
After checking it just goes back to the Menu without asking me to update etc.
And I tried to flash a stock recovery but than I got a Signatue failure.
Try taking the pc10img off SD card or removing SD altogether
Then of will boot into fastboot, the in fastboot mode type
fastboot OEM rebootRUU
Sent from my Nexus 7 using xda premium

fastboot oem lock CRITICAL?

Hellooow!
I noticed i got an message when relocking my bootloader.
It is relocked but still wondering what this means?
see bold text
hope someone knows! Thnx!
I'm S-OFF
HTC one m8 stock android 4.4.4
3.28.401.9
Radio 1.22.21331147A1.29G
ps: already searched foru and google and www etc...
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully…
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again…
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.153s
0kk0 said:
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully…
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again…
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.153s
Click to expand...
Click to collapse
Hi,
i have the same problem- searched the web etc, i didnt find what is the problem.
and it is not relocked on my phone, so i suppose its not on yours either
mato123 said:
Hi,
i have the same problem- searched the web etc, i didnt find what is the problem.
and it is not relocked on my phone, so i suppose its not on yours either
Click to expand...
Click to collapse
Hi!
No mine relocks fine.. it says RELOCKED and i can unlock it again and relock etc.. but everytime got that "error" message.
Are you s-off?
0kk0 said:
Hi!
No mine relocks fine.. it says RELOCKED and i can unlock it again and relock etc.. but everytime got that "error" message.
Are you s-off?
Click to expand...
Click to collapse
no, im S-ON and every time i try it says ***UNLOCKED***
mato123 said:
no, im S-ON and every time i try it says ***UNLOCKED***
Click to expand...
Click to collapse
you could try to download correct 0P6BIMG.zip for your device and place it on sdcard in your phone.
Then flash it from bootloader...
It flashed correctly on mine(unlocked) without fastboot oem lock
And then try to relock it again?
0kk0 said:
you could try to download correct 0P6BIMG.zip for your device and place it on sdcard in your phone.
Then flash it from bootloader...
It flashed correctly on mine(unlocked) without fastboot oem lock
And then try to relock it again?
Click to expand...
Click to collapse
Sorry, what is 0P6BIMG.zip? how can i find one for myself? im at&t one m8.
Also what should i write in fastboot command?
mato123 said:
Sorry, what is 0P6BIMG.zip? how can i find one for myself? im at&t one m8.
Also what should i write in fastboot command?
Click to expand...
Click to collapse
That zip is all in one file to flash stock system/os firmare recovery etc...
Here is more info for flashing RUU for your device: http://forum.xda-developers.com/att-htc-one-m8/general/lolipop-ruu-htc-att-m8-t3075854
0kk0 said:
That zip is all in one file to flash stock system/os firmare recovery etc...
Here is more info for flashing RUU for your device: http://forum.xda-developers.com/att-htc-one-m8/general/lolipop-ruu-htc-att-m8-t3075854
Click to expand...
Click to collapse
i ran RUU.exe and this is what i get:
capture.png where it rebooted to bootloader, fastboot usb mode, took it quite a while, cca 1 min
capture1.png says sth is wrong with usb
mato123 said:
i ran RUU.exe and this is what i get:
capture.png where it rebooted to bootloader, fastboot usb mode, took it quite a while, cca 1 min
capture1.png says sth is wrong with usb
Click to expand...
Click to collapse
strange...
have you tried:
1) From a powered off state, hold VOLUME DOWN while powering on the device.
2) Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
3) Connect the device to the PC while in this state and attempt the ROM update again.
0kk0 said:
I noticed i got an message when relocking my bootloader.
I'm S-OFF
Click to expand...
Click to collapse
There is no reason to relock the bootloader, since you are s-off.
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
0kk0 said:
you could try to download correct 0P6BIMG.zip for your device and place it on sdcard in your phone.
Then flash it from bootloader...
It flashed correctly on mine(unlocked) without fastboot oem lock
And then try to relock it again?
Click to expand...
Click to collapse
It won't work for that guy, since he is s-on.
The reason it flashed for you with the bootloader unlocked, is since you are s-off.
redpoint73 said:
There is no reason to relock the bootloader, since you are s-off.
Click to expand...
Click to collapse
thnx for your answer but doenst answer my question
i got an "error" ans whas wondering what it means etc...
mato123 said:
i ran RUU.exe and this is what i get:
capture.png where it rebooted to bootloader, fastboot usb mode, took it quite a while, cca 1 min
capture1.png says sth is wrong with usb
Click to expand...
Click to collapse
You have a USB connectivity issue, so this is probably the reason why fastboot oem lock does not work.
Make sure you run the command while the phone is booted into bootloader-fastboot mode.
redpoint73 said:
You have a USB connectivity issue, so this is probably the reason why fastboot oem lock does not work.
Make sure you run the command while the phone is booted into bootloader-fastboot mode.
Click to expand...
Click to collapse
tnx for your answer.
i was in bootloader in fastboot usb mode already.
i sent you PM regarding whole situation. should i continue to write here or make a new thread?

M8 frozen system

Hello all,
I have an interesting problem with an HTC M8 from AT&T. It is completely stock only with OTA updates.
"fastboot getvar all" returns this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.58.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.023s
Now the interesting part. Every time the phone reboots, it is always in the same state as if the partitions were frozen. That is to say for instance if I uninstall an app and then reboot, the app is there again. If I connect to a Wifi network and reboot, it disappears. Every single modification is erased and returns back to the same state. The most annoying thing is that when I connect to a Wifi the apps start synchronizing, crash and the phone reboots.
I tried the following:
- Factory reset from the interface to no avail as it returns to the state it was as well
- Factory reset from HBOOT reboots into recovery with a red triangle with exclamation mark and stays the same
- Downloaded the RUU from HTC, which reboots the phone and then stays the same and reports an error
- Tried "fastboot oem rebootRUU", which simply reboots the phone into android
- Tried to unlock the bootloader, which again reboots the phone into android
- Tried to flash a different recovery and ends up with error: FAILED (remote: signature verify fail)
- Tried to flash only the zip from the RUU and ends up with the same signature error
I simply can't think of anything else to do, and I hope one of the gurus can help me in my quest
Thank you for the time you spent reading my post.
My responses/comment below in red font:
tyraek said:
I have an interesting problem with an HTC M8 from AT&T. It is completely stock only with OTA updates.
(bootloader) version-main: 1.58.502.1
It doesn't appear to have had any OTA updates. Or at most a minor update from 1.54>1.58.
- Factory reset from HBOOT reboots into recovery with a red triangle with exclamation mark and stays the same
Try pressing vol up and power to show the stock recovery menu options. I believe factory reset is one of those options, although if wiping in OS didn't work; I doubt doing so from stock recovery will be any different.
- Downloaded the RUU from HTC, which reboots the phone and then stays the same and reports an error
Which RUU (exact filename)? There are many, and the RUU has to be intended for your CID version.
What error number, and what error message? This is very important, otherwise we have no idea why it failed.
You're on the right track, by trying to run an RUU. I think its your best bet to fix the issue. But we need to make sure you run the right RUU.
- Tried to flash a different recovery and ends up with error: FAILED (remote: signature verify fail)
You can't flash recovery with a locked bootloader.
- Tried to flash only the zip from the RUU and ends up with the same signature error
Again, which RUU specifically is very important. Can't tell if the RUU is the right one based on the info given.
Also, please verify on the hboot screen, near the top, if it says LOCKED (other possibilities being UNLOCKED and RELOCKED)
Click to expand...
Click to collapse
Thank you so much for your reply.
I have tried the factory reset from the recovery and the result is the same.
I downloaded the latest RUU for my model I believe:
RUU_M8[email protected]50319A_40.45.C33065.00_F_release_446225_signed_2
The update states it will upgrade from 1.58.502.1 to 4.28.502.2. Then I click the next button, the phone reboots and the updater says "waiting for bootloader", however the phone booted into android just like when I issue the command "fastboot oem rebootRUU". The installer then fails with error 171: USB connection error. I attached the RUU log as well.
The HBOOT says *** LOCKED ***. I tried to unlock it through the HTCdev process "fastboot flash unlocktoken Unlock_code.bin" but the bootloader stays in the same state.
bump
tyraek said:
I downloaded the latest RUU for my model I believe:
RUU_M8[email protected]50319A_40.45.C33065.00_F_release_446225_signed_2
Click to expand...
Click to collapse
Yes, this is for your model (AT&T) and the version number will work.
tyraek said:
Then I click the next button, the phone reboots and the updater says "waiting for bootloader", however the phone booted into android just like when I issue the command "fastboot oem rebootRUU". The installer then fails with error 171: USB connection error. I attached the RUU log as well.
.
Click to expand...
Click to collapse
This is means there is a USB communication issue, usually on the PC side, and there is nothing wrong with the RUU or the phone.
RUU is very finicky, and this issue is common. Try a different cable, different USB port, and try to re-install HTC Sync.
But you may have to resort to using another computer. Win7 and USB 2.0 (USB 3.0 is known to cause issues with RUU) are the best bet to get the RUU to run properly.
tyraek said:
The HBOOT says *** LOCKED ***. I tried to unlock it through the HTCdev process "fastboot flash unlocktoken Unlock_code.bin" but the bootloader stays in the same state.
Click to expand...
Click to collapse
Do not unlock the bootloader if you intend to RUU. Unlocked bootloader will actually cause the RUU to fail, by definition. RUU requires the bootloader by LOCKED or RELOCKED (or else you need s-off to run an RUU with the bootloader UNLOCKED).

Cant relock bootloader on Htc One M8

Hi, can anyone tell me whats the problem with my phone? I used to be able to relock the bootloader for upgrade. Unlocked and install CM roms. Try to relock for upgrades again but I cant do so anymore...
This is what I get from fastboot:
C:\adb>fastboot oem lock
...
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id =
0, error
(bootloader) = 4
(bootloader) [ERR] Cannot halt SPMI arbiter!!
(bootloader) [INFO] Rebooting device
FAILED (status read failed (No such file or directory))
finished. total time: 1.304s
Can anyone shed me some lights? Thanks in advance...
HTC doesn't use the standard commands for this. Check out http://forum.xda-developers.com/showthread.php?t=2708571
jshamlet said:
HTC doesn't use the standard commands for this. Check out http://forum.xda-developers.com/showthread.php?t=2708571
Click to expand...
Click to collapse
fastboot oem lock typically works just fine on this device to make the bootloader RELOCKED (for RUU, etc.).
The thread you linked, is to make it say LOCKED (only possible with s-off) such as for warranty purpose.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
Veydron said:
This is what I get from fastboot:
Can anyone shed me some lights? Thanks in advance...
Click to expand...
Click to collapse
The errors may indicate a hardware (emmc) failure. The bootloader screen still says UNLOCKED, correct? I've seen a few cases, there the fastboot oem lock command yields error messages, but the bootloader is RELOCKED regardless.
Thanks redpoint73. Initially I thought my battery having problem cos everytime when it reached below 15% it just went auto off without a proper powering down. After that once recharged, either app datas or radio will be corrupted. Apps i can reinstall again but if radio, I need to rerun the ruu. This happened twice already. So the problem that I have, isnt entirely due to the battery?
Sometimes I cant even switch it on. I need to remove the battery for sometime and it might work sometimes.
Veydron said:
Thanks redpoint73. Initially I thought my battery having problem cos everytime when it reached below 15% it just went auto off without a proper powering down. After that once recharged, either app datas or radio will be corrupted. Apps i can reinstall again but if radio, I need to rerun the ruu. This happened twice already. So the problem that I have, isnt entirely due to the battery?
Click to expand...
Click to collapse
Exactly same problem. After recharging, some apps were forced error and require re-installing. It's happened to me 4-5 times.
LOL so im not alone...which i thought i am lol

HTC M8 eye with official rom stuck in fastboot

Hey guys
Last night my phone(HTC m8 eye 5.07.401.1) slowed down badly, after a while it restarted automatically and fastboot screen showed up.
Things I've tried:
1-Restarting the phone after fully charging it for 1 billion times (worked once but the phone was frozen and restarted automatically again)
2- Trying to unlock the boot loader(Got the unlock_code.bin file, tried to load it to the phone using adb, it said success or done or something like that but nothing changed)
3-Trying to flash the official rom , didn't work
4-removing the SIM and SD card and restarting the phone, didn't work
by the way, usb debugging was not active last time the phone was working normally, Also the phone have not experienced any unusual activity like rooting or flashing custom roms or...
What can I do?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.07.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA00000000000
(bootloader) imei: 3580000000000000
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mels_tuhl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B81000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
------------------------------------------------------------------------------------------- fastboot results----------------------
C:\fastboot>fastboot devices
FA57LY901038 fastboot
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [SD_ERR] sd_read_sector: read sector failed (786432 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 3
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
(bootloader) [SD_ERR] sd_write_sector: write sector failed (786432 256)
OKAY [ 10.041s]
finished. total time: 10.041s
C:\fastboot>fastboot flash zip update.zip
target reported max download size of 1826332672 bytes
sending 'zip' (1687274 KB)...
OKAY [ 57.179s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 118.969s
---------------------------------------------------------------------------------------
I don't have the "eye", only the "standard" M8, but I'll try to help as much as I can, as far as anything that I believe is common between the two M8 versions (unlocking bootloader, flash RUU, etc.).
bahmaniq said:
2- Trying to unlock the boot loader(Got the unlock_code.bin file, tried to load it to the phone using adb, it said success or done or something like that but nothing changed)
Click to expand...
Click to collapse
So the bootloader screen says LOCKED? I assume that is what you mean by "nothing changed", but I want to be clear on this.
bahmaniq said:
3-Trying to flash the official rom , didn't work
Click to expand...
Click to collapse
What is the exact file name? It's best to provide specific file name/version info when asking for help. I've seen a lot of cases where the person "thought" they were flashing the right RUU, but in fact, it was not even the right one.
But based on what you've described so far (bootloader will not unlock, RUU will not run, emmc error) it sounds like a hardware emmc failure.
redpoint73 said:
So the bootloader screen says LOCKED? I assume that is what you mean by "nothing changed", but I want to be clear on this.
Click to expand...
Click to collapse
Yes, *****LOCKED***** it says, I guess it is very serious on this one. Based on knowledge I gathered in these 2 days, I think it should show a black confirmation screen after I try to unlock it (using *.bin file), but it simply does not.
redpoint73 said:
What is the exact file name? It's best to provide specific file name/version info when asking for help. I've seen a lot of cases where the person "thought" they were flashing the right RUU, but in fact, it was not even the right one.
Click to expand...
Click to collapse
Yes you are right, RUU is the most important part and I did not elaborate. There is a big chance that the RUU is the Achilles Heel!! Exact file name is: 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
redpoint73 said:
But based on what you've described so far (bootloader will not unlock, RUU will not run, emmc error) it sounds like a hardware emmc failure.
Click to expand...
Click to collapse
So, that's it, I'm gonna play "One last goodbye" and let the history judge. 2 years of EMERGENCY CALLS ONLY, 2 years of zero antenna...
After a silent peaceful night
You took my heart away
oh I wish, I wish you could have stayed
bahmaniq said:
Yes you are right, RUU is the most important part and I did not elaborate. There is a big chance that the RUU is the Achilles Heel!! Exact file name is: 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
Click to expand...
Click to collapse
That is not the RUU for the M8 eye. It's the RUU for the "regular" Euro M8. That is why you have signature error. Not sure where you can find the RUU for the "eye".
One more questions, is the phone going to fastbootRUU mode after running the command: fastboot oem rebootRUU
The error "command never completed" would suggest NO. But I'm curious whether the phone actually goes to RUU mode or not. RUU mode is signified by a black screen with large HTC logo. A progress bar will also appear below the logo, when the RUU starts to install. But in your case, you my have not gotten far enough for the progress bar to appear.
If the phone does not in fact even go to RUU mode due to emmc error, then it is probably irrelevant whether you have the right RUU or not. You will not get the RUU to run, if you can't even enter RUU mode.
redpoint73 said:
That is not the RUU for the M8 eye. It's the RUU for the "regular" Euro M8. That is why you have signature error. Not sure where you can find the RUU for the "eye".
One more questions, is the phone going to fastbootRUU mode after running the command: fastboot oem rebootRUU
The error "command never completed" would suggest NO. But I'm curious whether the phone actually goes to RUU mode or not. RUU mode is signified by a black screen with large HTC logo. A progress bar will also appear below the logo, when the RUU starts to install. But in your case, you my have not gotten far enough for the progress bar to appear.
If the phone does not in fact even go to RUU mode due to emmc error, then it is probably irrelevant whether you have the right RUU or not. You will not get the RUU to run, if you can't even enter RUU mode.
Click to expand...
Click to collapse
It has been a long time since the last time I was here but the problem is not solved. Sorry for the delay, and No the black screen with HTC logo does not appear.
Is there anything I can do to get rid of this fastboot screen? or the phone is useless

Categories

Resources