I recall that when I first got my swift it adjusted the mic volume when I was using it connected to my car audio via the 3.5mm headphone jack.
It no longer does this and I cannot find a way to adjust the microphone level.
Due anyone rise experience this andor do you know how to adjust the mic level?
I have same problem. Before CM OS 13 OTA you had it already ?
Related
Hi,
I bought a Seidio Audio Adapter - miniUSB To 3.5mm - with One-Touch/Mic at the XDA store. It works great and I have no problem listening to music with my regular sony headset since you can adjust the volume with audiomanager. However when I am on a phone call it is super loud and I cannot adjust the volume. I looked around for a registry tweak but they usually talk about BT or speakerphone. What I want is the actual volume on the wired headphone. Can someone help? I am going deaf here!
Bump!
Somebody?
Hi. I have tried many different rom's and Kernel's on my gnexus. I have been able to adjust the headset volume, and speaker volume with different rom's (curently using Foxhound), but have never found a way to increase the bluetooth a2dp out volume. I have a bluetooth reciever on my amp at home, used to play music from my Nexus S with great volume (still does) but I have never been able to with Gnexus. Gnexus plays but with the amp all the way up it is still not loud at all. When I plug direct conection to Gnexus using rca's and the headphone jack it works fine. Has anyone had any success in this area and would be willing to share the experience?
Thanks.................
Dear All,
I have a quite big problem, when I want to make a phone call in my car.
I connect the phone's audio out via a minijack to my car's radio and I want to use my phone's built in microphone for phone calls.
Unfortunately the mic does not record my voice loud enough. When I use the phone's built in loudspeaker it works fine, but when I use the car radio as sound output the mic does not record loud enough.
Does anybody know how to solve this issue?
My Samsung Galaxy Note 1 had a car mode available for this.
Thanks!
Simply, the headphone jack also contains the mic connector for a proper phone head/earphone and mic. Plugging your phone into your stereo via this jack disconnects the internal mic in favour of the headset mic which of course you won't have if you connect to the car stereo. So you are effectively disabling the ability to use the phone for calls when plugged in this way.
But the mic is NOT disabled. It is still enabled but is recording the voice as if it is being used like in a normal phone call. All I need is a function to switch the mic to some kind of a handsfree mode.
Sorry for my English.
With "normal phone call" I mean the phone being held right at your ear.
With "handsfree mode" I mean speakerphone mode.
So I need the audio out via stereo jack and I need the voice in via phone microphone in speakerphone mode...
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
player911 said:
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
Click to expand...
Click to collapse
I already use a standard audio cable with 2 connections only. The problem is not that the microphone is not working at all but it is not recording loudly enough. I simply want it to record as loudly as it does on speakerphone mode.
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
hpsauce37 said:
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
Click to expand...
Click to collapse
Yea I have a pair of wireless beatsx, but those headphones are junk anyway. Can not get them "loud". Maybe its the phone/bluetooth..
I noticed the same thing when I first paired the 7t with my car's BT. I don't consider it a problem because all I had to do was raise the volume on the car radio, and it remembered the setting. But I'm only listening to navigation prompts and voice phone calls. I haven't tried it with music.
Anyone solved this problem?
While using headphones or any audio-bt devices connected to oneplus 7t i can get only around 70-80% of max device volume.
My bluetooth can get painfully loud on any system... Are you sure you are not facing to sets of volume controls?
Some "dumb" headphones / speakers just have one output volume and you control loudness via the phone volume. Others have their own volume processing (like a car stereo). If you max out your phone volume then you can control the loudness via the stereo.
Numerous times I've been in the car and can't figure out why I need to turn the stereo volume up so high only to realize I've bumped the phone volume to a low setting.
Hey guys! I'm facing the much known issue with the strong echo in calls while using the handsfree speaker. My audio is just fine, but the other party suffers from a slightly delayed strong echo.
While using the ear speaker or a headset it's mostly fine and with no echo.
Only in SIP-Calls through the native phone app this issue extends from handsfree speaker to the ear speaker as well.
In any case a huge number of devices and versions seems to be afflicted.
Due to my observations, I noticed that there is a change in the behavior of the handsfree function between the stock rom and the lineage rom.
Stock ROM: with the handsfree function enabled, the audio is output via the same ear speaker as for regular calls (without the handsfree func.).
LineageOS 16.0: the handsfree function outputs the audio to the audio speaker and NOT to the ear speaker.
On my device (S7 herolte), the mic is located right next to the audio speaker, whereas the ear speaker is much far away from the mic. Maybe this is the crucial reason for this issue?
Therefore I would like to change the audio output from audio speaker to ear speaker while the handsfree function in calls. Would you guys be so kind to help me with that? Are there any configs to be edited for that?
I'm on a
Samsung Galaxy S7 (herolte) SM-G930F,
LineageOS 16.0-20200607-UNOFFICIAL-herolte,
lineage_herolte-userdebug 9 PQ3A.190801.002 eng.ivanme.20200607.180926 test-keys.
Thank you in advance, guys.
Regards