I can't get my fastboot to recognise my phone. Adb works fine but fastboot doesnt come back with a device after I fastboot Devices in download mode. Any suggestions? I'm using windows 10
in linux I have to sudo fastbbot. so maybe if you run the shell as admin?
I don t have win 10, but what shows the devicemanager?
can you force to install the drivers again?
I fixed it. I ran htc manager. Then I installed Google usb drivers in sdk manager. Dont know which one done The trick
Related
Hi,
I realize a lot of people might have the same problem as I have, but haven't found the answer after searching for many hours. So here's my problem:
windows vista x64
installed android SDK and all related drivers
GN is recognized with correct driver in both fastboot mode and regular "on" mode.
GN is recognized as a device in regular on-mode with 'adb devices'
GN is recognized as a device in fastboot mode with 'fastboot-windows devices'
HOWEVER, when GN is put into fastboot mode, NO devices are found with 'adb devices' even though the icon for 'safely removing hardware' pops up with 'Android ADB Interface', which means the driver is correctly installed.
Someone please help explain why the device is not recognized by 'adb devices' command under fastboot mode even though it's recognized by the computer!
Summary:
GN is found with 'adb devices' for normal boot, but GN is not found under 'adb devices' for fastboot mode. I have reinstalled the android ADB driver, but still the same problem.
I am stressed out! Please help me
I have noticed exactly what you are talking about however what I have found is that it doesn't seem to need to be able to respond to the adb devices command. I was still able to unlock,root and flash multiple different boot.img and radio.img files through fastboot without the computer returning the device while in fastboot. Hope this helps.
Justin
P.S. while you are in fastboot mode it seems you may be looking for something different than standard adb commands. Fastboot is primarily used in this situation so a command for you will typically look something like this"
fastboot-windows flash boot boot.img
or
fastboot-windows flash radio radio.img (the radio.img and boot.img files used in these examples you would want located in the same folder as fastboot-windows)
if you want to try the software out without flashing it "permanently" try:
fastboot-windows radio radio.img (just forget the flash portion)
for unlocking the bootloader the command will look something like this:
fastboot-windows oem unlock
ADB isn't used in fastboot mode, fastboot.exe is.
ADB is for when the phone is running Android or recovery only.
Phone doesn't recognize ADB in fastboot
Phone doesn't recognize ADB in fastboot - have used every conceivable method - downloaded Samsung drivers. Downloaded PDANet. Uninstalled Samsung and tried Naked Samsung. I got the phone unlocked. But I CANNOT get the PC 64 to recognize ADB when I am in fastboot. HELPPPPPPP. I've been working on this for TWO DAYS, and it is RUINING my Christmas holiday.
Have you tried the driver installation/troubleshooting section of this post?
Unfortunately, yes. I tried the Samsung drivers. Then I tried the PDANet. I also tried the Samsung naked drivers. I was sure that MSKIPS toolkit was going to work, but when I typed in "2" for rooting, NOTHING happened. I'm at my wits end.
HeathCliffR said:
Phone doesn't recognize ADB in fastboot - have used every conceivable method - downloaded Samsung drivers. Downloaded PDANet. Uninstalled Samsung and tried Naked Samsung. I got the phone unlocked. But I CANNOT get the PC 64 to recognize ADB when I am in fastboot. HELPPPPPPP. I've been working on this for TWO DAYS, and it is RUINING my Christmas holiday.
Click to expand...
Click to collapse
Of course it doesn't.
AS STATED MULTIPLE TIMES IN THIS THREAD, YOU MUST USE FASTBOOT.EXE.
Please, read thread then reply.
When phone is turned ON - use adb
When in FASTBOOT mode - use (surprise surprise) fastboot
When phone is turned on or in recovery - use adb (check it with "adb devices" ,without " in cmd)
When in FASTBOOT mode - use fastboot (check it with "fastboot devices" ,without " in cmd)
In order to work fastboot you must have the fastboot.exe preferably in the same folder with adb
Try this
I tried installing PDAnet but no Joy.. but went to device manager and selected adb drivers and samsung from the list and that did the trick...
Hello,
I have problem with my phone and adb, I have installed all driver for my htc, adb, fastboot,.. but when I try to check for connected devices in adb via adb devices command the list is empty even if windows recognize the device. I have tried it in Ubuntu, but the situation is same.
I don't know whats wrong, because it works for my Gnex and GTab.
Did you enable USB debugging on the phone
Sent from my HTC Desire using xda app-developers app
that was the first thing i made
well my phone is seen by adb when it's runing (in system) but it is not seen in fastboot mode
icefun said:
well my phone is seen by adb when it's runing (in system) but it is not seen in fastboot mode
Click to expand...
Click to collapse
...and it is perfectly OK.
The adb tool on your PC needs a adb daemon running on your device: this happens when the Android system is running (or a Recovery with adb daemon). When you are in fastboot mode the Android system has not really started loading yet, so there is no adb daemon to talk to your adb tool on PC -- hence your phone is 'not seen' by adb.
But it is seen by fastboot tool (another part of Android SDK tools) at this stage. So in fastboot mode you can flash images and do other stuff: just not with adb tool, but fastboot tool.
Well thx for eplaining my bad i thought that it will respond to adb devices like my other devices
PLS Close this thread
Hi, I searched for an answer but I didn't find it, so I created this thread.
My Z00A is running on the latest official OTA version perfectly fine. It is unlocked but bricked once and I successfully unbricked it.
I installed Intel Android driver and adb on windows 10.
Booted in Android, adb sees my device when I enter "adb devices".
In the bootloader, when I enter "fastboot devices", fastboot leaves a bank space and open a new command line and if I enter any other command it says < waiting for device >.
It looks like Windows 10 didn't let the driver work properly. I downloaded the drivers from ASUS and manually installed the bootloader interface driver via legacy wizard. Then, I uninstalled the old one and now fastboot is functional.
so I'm trying to fastboot flash TWRP. That way I can root it after the custom recovery is set up.
My HTC is S-OFF, I installed android studio for the adb fastboot command prompt. Then installed all HTC drivers. I then plugged in my HTC into my pc which is running windows 10 via USB port which are 3.0
I opened up the folder where the fastboot was installed when I downloaded android studio. Then I pushed shift and right clicked and chose open command promp. I then typed: adb devices
The command prompt runs and it shows my HTC in the device list. Then I typed: adb reboot bootloader. It boots to the fastboot.
And so here is my problem........... once I boots to fastboot I thenjoy again type: adb devices. Cmd runs and the device list is blank. I checked my drivers and device in device manager and everything is fine. Even I'm fastboot it reads the drivers no problem.
I've tried everything. I've read to try reinstalling the drivers, try installing universal drivers, try different USB cables, try different USB ports that arent 3.0 port, I even tried a different adb fastboot software and still came up with the same outcome. I've read a bunch of different threads and just can't find anything. I am just stuck I don't know what to do. And am asking for help please. I would really appreciate the help and guidance. Because....... this s**t is driving me crazy haha. I've rooted galaxies and have my s5 on lollipop rooted. But
I'm still a noob and especially with HTC. So please some one lend me a helping head I am at a complete loss.
Whisperz6662 said:
so I'm trying to fastboot flash TWRP. That way I can root it after the custom recovery is set up.
My HTC is S-OFF, I installed android studio for the adb fastboot command prompt. Then installed all HTC drivers. I then plugged in my HTC into my pc which is running windows 10 via USB port which are 3.0
I opened up the folder where the fastboot was installed when I downloaded android studio. Then I pushed shift and right clicked and chose open command promp. I then typed: adb devices
The command prompt runs and it shows my HTC in the device list. Then I typed: adb reboot bootloader. It boots to the fastboot.
And so here is my problem........... once I boots to fastboot I thenjoy again type: adb devices. Cmd runs and the device list is blank. I checked my drivers and device in device manager and everything is fine. Even I'm fastboot it reads the drivers no problem.
I've tried everything. I've read to try reinstalling the drivers, try installing universal drivers, try different USB cables, try different USB ports that arent 3.0 port, I even tried a different adb fastboot software and still came up with the same outcome. I've read a bunch of different threads and just can't find anything. I am just stuck I don't know what to do. And am asking for help please. I would really appreciate the help and guidance. Because....... this s**t is driving me crazy haha. I've rooted galaxies and have my s5 on lollipop rooted. But
I'm still a noob and especially with HTC. So please some one lend me a helping head I am at a complete loss.
Click to expand...
Click to collapse
You're using the wrong command.
You can't use adb commands when booted to bootloader, only while booted to system, as you did the first time.
Once you do adb reboot bootloader use fastboot devices and your phone will show in cmd. You need to use fastboot commands while booted to bootloader.
xunholyx said:
You're using the wrong command.
You can't use adb commands when booted to bootloader, only while booted to system, as you did the first time.
Once you do adb reboot bootloader use fastboot devices and your phone will show in cmd. You need to use fastboot commands while booted to bootloader.
Click to expand...
Click to collapse
Wow that was so simple...... (face palm)
You are a saint haha. Thank you very much that was getting to me. It did show up was able to flash twrp.
No where did I see anything about typing fastboot in cmd instead of adb while phone was in fastboot. Well it might of and I might of just not of understood it when I read it. Again thank you I appreciate it
On Device Manager (Window 10). Were updating the driver, I can only see ADB interface but no Fastboot interface. I'm on the latest version SDK from Google and have OnePlus driver installed. I can command ADB but not fastboot. What am I missing? My device is OnePlus 7T TMobile is sim unlocked and I can toggle OEM unlocking and is on.
Not sure what mean, but fastboot only works when you're booted in bootloader. (Adb reboot bootloader)
Sent from my OnePlus7TPro using XDA Labs
That's correct but when I fastboot cmd it get stuck on "waiting for device". So I read around on XDA on how to fix it and I tried to follow the instruction on PC - device manager, still no go.
PesTicide. said:
That's correct but when I fastboot cmd it get stuck on "waiting for device". So I read around on XDA on how to fix it and I tried to follow the instruction on PC - device manager, still no go.
Click to expand...
Click to collapse
I myself have never had this problem, I can only suggestion reinstalling OnePlus drivers.
Hopefully you figure this out
Sent from my OnePlus7TPro using XDA Labs
I reinstalled couple of times. Still no go! This is the first time that this happening. Never had problem since day one on Nexus devices. I'm going to try again and search more around.
You can also use the universal drivers by clockworkmod https://adb.clockworkmod.com/
Here's what I did.
1) Extract the android sdk platform tools and put on your c:// drive
2) Install the universal usb drivers
3) Enable usb debugging on your one plus and connect to computer. Switch to usb debugging mode and accept the popup on your one plus to allow the connection.
4) Open cmd and run "cd C:\platform-tools", then run "adb devices" to ensure that your devices is connected properly
5) Run "reboot bootloader" and device will restart into bootloader mode and fastboot will now work
*This is all assuming that you've already oem unlocked your devices as well already*
It work till fastboot. Still stuck at "waiting for device".
PesTicide. said:
It work till fastboot. Still stuck at "waiting for device".
Click to expand...
Click to collapse
Are you trying to open? Command shell? In windows 10 right? So for your information in windows 10 it's not supported , you have to open that platform tool folder which you installed already named as adb, platform tools , sdk may go into that folder and you will see a folders directory above there .. just click on that and type cmd and hit enter and cmd will pop up now you can use all your commands it's not your fault it's windows 10 fault ..maybe hope it may work for you
That how I done it. Fastboot Command appear on my Google Pixel 2 and 3 but I can't do it on my 7T. I don't get it
Thanks for the help! I tried working on Device Manager on PC yet doesn't work. Adb shell command work but no Fastboot command.
I found the solution! This is what I did and it worked for me! Here's the link for anyone who has the same issue I went through. Here you go and follow the instruction. http://www.wtfandroid.com/fix-fastboot-device-not-recognised-problem/
Mod you can close this thread. Thanks again for everyone who tried to help me. :highfive: