Related
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I would also like to know the answer to this question as I have a New Zealand international model but the rom is old. Can I flash the UK version which is the most uptodate. (I have the wifi version).
Thanks
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
colint3 said:
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
Click to expand...
Click to collapse
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
deviant_cryptic said:
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
Click to expand...
Click to collapse
I just downloaded the firmware and used Odin. It didn't wipe the sdcard it just updated the apps. Its worked well ever since.
I have since updated to N5110XXCMK1 using the same method.
Regards
Colin
Thanks. I used the same method to flash 4.2.2 on my device. I am also now on xxcmk1.
Sent from my GT-N5110 using Tapatalk
flash counter
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
miguel0706 said:
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
Click to expand...
Click to collapse
1. My flash counter did not change when I flashed 4.2.2 using Odin.
But it did when I used auto cf root afterwards to root the phone.
2. Nope I haven't tried.
Sent from my GT-N5110 using Tapatalk
More...
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
miguel0706 said:
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
Click to expand...
Click to collapse
have you found the answer?
yeeahnick said:
have you found the answer?
Click to expand...
Click to collapse
Not yet? Now im just waiting for the update to kitkat
i am having this prob too. does my gt-i9300 need to be rooted to flash a stock firmware from different country?
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
LHNothing said:
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
Click to expand...
Click to collapse
Update: flashing went great, just had to remove the .md5 at the end of the ROM file. Everything seems to be in order.
Hi,
I have a galaxy s4 mini gt-i9515 lte on the three network on the UK. I'm currently running cyanogenmod nightly but wish to flash back to stock for gear compatibility.
I'm having trouble working out the right stock rom.
The only one that matches my baseband is the Spain movistar rom.
Is that right? Will that have me all Spanish? What would happen of I flashed the rom for three? The baseband doesn't match, but I don't know if that's an issue?
Thanks.
I have the same as yourself and after looking on SAMMOBILE and other places I would be wondering what to use too. I'm not sure what the last update 3 have released in the UK but it looks like it might have been XXUAMF5 which you can download from here. I have a copy of it I downloaded last year as a go to stock ROM if I needed it. You can always use Kies to check for updates after.
Excellent, will give that a go. The movistar one appears to have "issues"
RIght, so the H3G one didn't work as I've got an unlocked phone from Carphone Whorehouse. So I had to go with the BTU I9515XXUBML4, and that "works" only my NFC won't turn on and my wireless is INCREDIBLY unstable, just stopping providing any network connections.
Is that likely to be a "Wrong Stock ROM" issue, generic Stock Rom Issue, or an "I've messed my phone up" issue?
Ran just fine on Cyanogenmod, and I had /some/ wifi issues on the original ROM, but not like this...
THEMikeUK said:
RIght, so the H3G one didn't work as I've got an unlocked phone from Carphone Whorehouse. So I had to go with the BTU I9515XXUBML4, and that "works" only my NFC won't turn on and my wireless is INCREDIBLY unstable, just stopping providing any network connections.
Is that likely to be a "Wrong Stock ROM" issue, generic Stock Rom Issue, or an "I've messed my phone up" issue?
Ran just fine on Cyanogenmod, and I had /some/ wifi issues on the original ROM, but not like this...
Click to expand...
Click to collapse
I doubt you have messed up the phone. There is a collection of ROMs here. Perhaps you need to flash a compatible kernel rather than the CM one. Sounds like you don't need a branded ROM or anything.
When I received my S3, it was on a T-Mobile branded stock firmware 4.1.1. I wanted to try CyanogenMod, so I installed it, but didn't like it.
Here's where my problem begins. Upon wiping my phone back to stock to get rid of CyanogenMod, I find that it's now AT&T branded, despite the physical phone being a T-Mobile T999.
I tried rooting it and using CSC changers, but those tell me that the PreconfigUI is SingleCSC, and thus apparently unchangeable.
What I want to do is somehow get my phone back to T-Mobile branded stock.
P.S. I do not have a MicroSIM yet.
GraphicsApathy said:
When I received my S3, it was on a T-Mobile branded stock firmware 4.1.1. I wanted to try CyanogenMod, so I installed it, but didn't like it.
Here's where my problem begins. Upon wiping my phone back to stock to get rid of CyanogenMod, I find that it's now AT&T branded, despite the physical phone being a T-Mobile T999.
I tried rooting it and using CSC changers, but those tell me that the PreconfigUI is SingleCSC, and thus apparently unchangeable.
What I want to do is somehow get my phone back to T-Mobile branded stock.
P.S. I do not have a MicroSIM yet.
Click to expand...
Click to collapse
Can you go to your phone's settings => about device and check what the firmware settings are? Let's see what you have under firmware version, baseband version & build number. If possible, you may post a screen shot. Did you say you returned to stock by wiping your phone? Hardly seems likely and you would have probably needed to flash some firmware. Would you recall what you flashed?
Thanks for stepping up. My phone's info is:
Android Version is 4.1.1
Baseband is I747UCDLK3
Build is JRO03L.I747UCDLK3
I did not flash any firmware, as I had no reason to.
GraphicsApathy said:
Thanks for stepping up. My phone's info is:
Android Version is 4.1.1
Baseband is I747UCDLK3
Build is JRO03L.I747UCDLK3
I did not flash any firmware, as I had no reason to.
Click to expand...
Click to collapse
It's definitely on AT&T firmware. Apologies if I sound like I'm doubting you but are you certain it had T-Mobile firmware when you acquired it? I'd guess it was probably already an AT&T phone. If you bought it in the secondary market, there could have been some previous repairs involving parts swaps. Your safest bet may be to leave it as is and unlock for you use on T-Mobile. Trying to force on T-Mobile firmware now could result in a brick. As it is on 4.1.1, you can easily free unlock it by following the well tested method you'll find elsewhere in this forum.
No apologies needed. I forgot to state that the phone was purchased with the T-Mobile boot animation and bloatware already present, and that the model number printed below the battery is T999. I've got no clue if there was a parts swap or not. Is the method to unlock that's posted elsewhere that you're referring to the one that begins with you dialing *#197328640#? If so, i've tried it but never got the unlock message to show.
GraphicsApathy said:
No apologies needed. I forgot to state that the phone was purchased with the T-Mobile boot animation and bloatware already present, and that the model number printed below the battery is T999. I've got no clue if there was a parts swap or not. Is the method to unlock that's posted elsewhere that you're referring to the one that begins with you dialing *#197328640#? If so, i've tried it but never got the unlock message to show.
Click to expand...
Click to collapse
There could have been a previous JTag operation involving forced firmware installation on the MB. I've seen previous hybrid firmware involving one or other partition belonging to a different model - e.g. the modem, bootloader or something else but not the complete system.
Yes, that's the unlock method I was referring to. You won't get any confirmation that the process worked at the end. However, if you did it correctly, you would know it worked when you insert a non-compatible SIM card and it works. You should also be able to install T-Mobile apps especially the Wi-Fi calling app which is a really nice feature of T-Mobile.
I'm getting it microSIM'ed tomorrow. I'll see how that goes.
UPDATE: Successfully obtained and installed T-Mobile microSIM. Still wish to replace AT&T boot animation and bloatware with T-Mobile's, though.
GraphicsApathy said:
I'm getting it microSIM'ed tomorrow. I'll see how that goes.
Click to expand...
Click to collapse
OK. I'd be interested in knowing the outcome but I'll be surprised if it isn't unlocked already. Did some further research and there have been some reports of people successfully 'flashing' AT&T firmware on T-Mobile phones, and vice versa. Not sure why this should happen and conventional logic suggests the result should be a hard brick which is indeed the most common outcome. I'll also suggest you boot into download mode and see the information under bootloader. If the device has a T-Mobile bootloader, it may be possible to remove the OS via custom recovery and re-flash T-Mobile firmware.
Download mode currently gives Product Name as SGH-I747. Wiping AT&T OS via custom recovery and then installing the proper one sounds like a good lead. I eagerly await your instruction
GraphicsApathy said:
Download mode currently gives Product Name as SGH-I747. Wiping AT&T OS via custom recovery and then installing the proper one sounds like a good lead. I eagerly await your instruction
Click to expand...
Click to collapse
If download mode info shows secure bootloader enabled, the phone is, to all intents and purposes, now an AT&T phone. Attempting to flash T-Mobile firmware may likely result in a brick which would require a JTag fix. I was hoping download mode would show it still had a T-Mobile bootloader which could have allowed for safe firmware installation but this does not appear to be the case. Likely the motherboard was previously replaced or it suffered a brick and AT&T firmware was JTagged on. Either way, it would be safer to leave it as is.
Bummer. I'll leave it as is then. Thank you for all the help.
So, I ordered a refurb sm-p600 Wifi-only tablet from Amazon, but I received a Verizon sm-p605v. Now they show out of stock on the Wifi model. Am trying to arrange a swap, but don't know how successful I'll be.
It's my first tablet and I absolutely LOVE it and don't want to give it up.
So, it's basically the same thing, but there are issues:
1.) Has Verizon junk all over it.
2.) Complains about no SIM card - if I put in a SIM card it complains about activation. (These don't appear to ever go away)
3.) Have to keep it in airplane mode or it will drain the battery trying to connect, if I keep it in airplane mode, at least one app (Accuweather) complains about no network
4.) And this is the biggest issue - can't check for new updates - I really want Lollipop so it matches my phone, but it basically says update is unavailable. I assume Verizon has it set up so that you have to pull updates only from them.
I'm never going to put this on a mobile plan and I'd really prefer to have the non Verizon tablet, but if I can't, is it possible to flash the stock wi-fi sm-p600 firmware onto this so that it thinks it's a sm-p600 - or is this a recipe for brick making?
I also haven't been able to find a sm-p605v lollipop image, so I may be out of luck assuming the answer is no.
I'm in a similar situation. I purchased what I thought was a SM-P605 (international version) and I got shipped a SM-P605V (Verizon edition). In my case, the vendor listed the device as an SM-605, but it was an SM-P605V. Further down in the listing it listed it as a Verizon edition, so that's the reason they declined the return.
Unfortunately, you cannot use SM-P600 firmware, as it is a different processor.
There is a way to update it to 5.1.1 though. When plugging the tablet into the PC, there is a Verizon utility for Windows on the tablet that lets you update the software. (it's based on Samsung Kies). I just did it yesterday. Works fine. I'm trying to figure out if I can put a non-Verizon factory Samsung image on it so I can at least have the option to put my own custom image on it (the Verizon edition has a locked bootloader, which prevents you from putting non-Samsung ROM images).
I personally am sick of vendors customization of Android to the point where it is not recognizable. Give us the option for stock Android...
After 3 attempts I finally got them to send me the correct Wifi only model, which works great!
Hello, last week I was given a Samsung Galaxy Ace II to install a custom ROM on, however, after flashing CM 11 I noticed that the phone wasn't recognizing the sim card, so I tried to downgrade again but I got the same issue. So far I've installed about 10 different stock firmware and updates and the phone still doesn't want to recognize the sim card.
The phone was originally working with the operator Movistar (Venezuela). But it seems like there's no official firmware for my country. I've already tried this: http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8 and it didn't work.
There's just one thing that I've read online but haven't tried, something that has to do with the "tee" folder, I don't really know what I'm supposed to do with it, and I also don't know where to get the original files from.
If there's anything that you guys know that might help me, please post it.
PS: The phone was originally running 2.3.6 GB (In case that matters).
PSS: Yes, I am pretty dumb for not backing up the entire firmware prior to installing CM, but there's nothing I can do now.