Develop Bugs

Unbricking LG LU6200

DISCLAIMER: Not my work, Tutorial followed from : http://choimobile.vn/threads/unbrick-lg-lu6200-ghim-cap-qhsusb-khong-thao-may.8448.html
Hi
I have been using LU6200 from last one year, and I loved this phone. I have tested many roms, and was using 4.4.2 CM11 rom. Then I installed an app from Play store, which modified the kernel, and booted my phone.
At this stage, my phone was totally dead, no screen indication, no light, no sound. Only one thing, is that when I connect my USB cable to computer, my computer try to install driver and also make sound of USB connection and disconnection.
So below are he steps which I have performed
MUST: KEEP YOUR PHONE ATTACHED WITH USB CABLE TO PC
Download the following files
http://pan.baidu.com/share/link?shareid=547069&uk=3071575749 <-USB DRIVER
http://pan.baidu.com/share/link?shareid=547084&uk=3071575749 <-Softwares
http://www.mediafire.com/download/ed4zec8itgjh37t/unbricklu6200.rar
Winhex - Forensic or Specialist version full not evaluation and registered. I have found only one version [WinHex 17.SR1.rar] which worked for me, not remember where from I downloaded this
Follow this tutorial http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/ to run your OS in Advance mood where we have to disable DRIVER SIGNATURE ENFORCEMENT
When you have booted into windows after disabling driver signature, install the 1st Link file,
Install the Driver, when Installed it will show a COM Port installed, QUALCOMM one
Install the Softwares, default path will be C:\Program Files (x86)\Qualcomm\QPST\bin\
You also have items in your start menu, so run
1, In the "Start Menu" -> "QPST" -> "QPST Configuration" RUN This
2, Select the tab "PORT" and click "Add New Port ..."
3. A new window will open where the COM port which is newlly added to your system will be listed, select that port and add that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Keep that running
4 Go to the "Start Menu" -> "QPST" -> eMMC Software Downloadapp " RUN THIS
4.1 Uncheck, Program MMC Device
4.2 Click Browse, it displayed me PHONE ATTACHED with QUALCOM details near the top right of the image, where No ports Active is written
4.3 Check Search Path 2 and Browse to you files, where you have downloaded 3rd file. Which contains one hex, one img and mbn file
4.4 In the Flash Programming File name, enter the name of hex file
4.5 in boot image, enter the mbn file name
4.6 Click DOWNLOAD
at this point, it mounted me a 200kb drive which was not formatted. I have formatted that, and then kept this program running in the background as well
5. Winhex
5.1 Run Winhex, Make sure you have forensic version, and also Full version ,there are evolution version too, but that will not work. FULL VERSION and FORENSIC/SPECIALIST License is must
5.2 In Winhex, go to "File", "Restore Image", Change the file type from "WHX" to "Raw Image container"
5.5 Select lu6200.img from the 3rd file downloaded
5.5 Now it will ask for Target disc
5.6 Carefully select the QUALCOM, or else you will be formating your own HDD
5.7 In this window click OK
Now it will start giving your some strange, nasty warnings, just keep pressing OK, and Yes Continue Ok, etc etc
When that will finish, you phone will auto restart.
Now you may have to reflash that, or wipe it and install the KDZ ICS engineer version again. As right now My phone is in boot loop but I guess that can be fixed.
Tutorial followed from : http://choimobile.vn/threads/unbrick-lg-lu6200-ghim-cap-qhsusb-khong-thao-may.8448.html

我大中华威武啊，哈哈

qqzwc said:
我大中华威武啊，哈哈
Click to expand...
Click to collapse
我是威武大中国区第二部分哈哈哈

help me please
after step one i got 0 byte partition and when i connect the phone by usb it says unknown device and i cant do anything to it

baidu links are not working!. Can this tutorial also be used for SU640 or the .img file is only for LU6200?

not working they stock only on emmc software download, no pocket recieve and while running that i try winhex judt like the tutorial said but i dont detect any usb mmc to use for.
please provide your own screen shot that we can follow yiur step. thanks anyways

aamirrajpoot said:
DISCLAIMER: Not my work, Tutorial followed from : http://choimobile.vn/threads/unbrick-lg-lu6200-ghim-cap-qhsusb-khong-thao-may.8448.html
Hi
I have been using LU6200 from last one year, and I loved this phone. I have tested many roms, and was using 4.4.2 CM11 rom. Then I installed an app from Play store, which modified the kernel, and booted my phone.
At this stage, my phone was totally dead, no screen indication, no light, no sound. Only one thing, is that when I connect my USB cable to computer, my computer try to install driver and also make sound of USB connection and disconnection.
So below are he steps which I have performed
MUST: KEEP YOUR PHONE ATTACHED WITH USB CABLE TO PC
Download the following files
http://pan.baidu.com/share/link?shareid=547069&uk=3071575749 <-USB DRIVER
http://pan.baidu.com/share/link?shareid=547084&uk=3071575749 <-Softwares
http://www.mediafire.com/download/ed4zec8itgjh37t/unbricklu6200.rar
Winhex - Forensic or Specialist version full not evaluation and registered. I have found only one version [WinHex 17.SR1.rar] which worked for me, not remember where from I downloaded this
Follow this tutorial http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/ to run your OS in Advance mood where we have to disable DRIVER SIGNATURE ENFORCEMENT
When you have booted into windows after disabling driver signature, install the 1st Link file,
Install the Driver, when Installed it will show a COM Port installed, QUALCOMM one
Install the Softwares, default path will be C:\Program Files (x86)\Qualcomm\QPST\bin\
You also have items in your start menu, so run
1, In the "Start Menu" -> "QPST" -> "QPST Configuration" RUN This
2, Select the tab "PORT" and click "Add New Port ..."
3. A new window will open where the COM port which is newlly added to your system will be listed, select that port and add that
Keep that running
4 Go to the "Start Menu" -> "QPST" -> eMMC Software Downloadapp " RUN THIS
4.1 Uncheck, Program MMC Device
4.2 Click Browse, it displayed me PHONE ATTACHED with QUALCOM details near the top right of the image, where No ports Active is written
4.3 Check Search Path 2 and Browse to you files, where you have downloaded 3rd file. Which contains one hex, one img and mbn file
4.4 In the Flash Programming File name, enter the name of hex file
4.5 in boot image, enter the mbn file name
4.6 Click DOWNLOAD
at this point, it mounted me a 200kb drive which was not formatted. I have formatted that, and then kept this program running in the background as well
5. Winhex
5.1 Run Winhex, Make sure you have forensic version, and also Full version ,there are evolution version too, but that will not work. FULL VERSION and FORENSIC/SPECIALIST License is must
5.2 In Winhex, go to "File", "Restore Image", Change the file type from "WHX" to "Raw Image container"
5.5 Select lu6200.img from the 3rd file downloaded
5.5 Now it will ask for Target disc
5.6 Carefully select the QUALCOM, or else you will be formating your own HDD
5.7 In this window click OK
Now it will start giving your some strange, nasty warnings, just keep pressing OK, and Yes Continue Ok, etc etc
When that will finish, you phone will auto restart.
Now you may have to reflash that, or wipe it and install the KDZ ICS engineer version again. As right now My phone is in boot loop but I guess that can be fixed.
Tutorial followed from : http://choimobile.vn/threads/unbrick-lg-lu6200-ghim-cap-qhsusb-khong-thao-may.8448.html
Click to expand...
Click to collapse
Confirmed , LU6200 boot img working on su640 ..
and thnx man u saved my phone , Winhex Worked

mrroks said:
Confirmed , LU6200 boot img working on su640 ..
and thnx man u saved my phone , Winhex Worked
Click to expand...
Click to collapse
I'm sorry, but can you upload the fie again?
That baidu link above doesn't work anymore.
Sent from my LG-SU760 using XDA Free mobile app
---------- Post added at 01:10 PM ---------- Previous post was at 01:00 PM ----------
qqzwc said:
我大中华威武啊，哈哈
Click to expand...
Click to collapse
@qqzwc , are you still working on Korea LG Optimus 2X (SU760)?
Sent from my LG-SU760 using XDA Free mobile app

Genie's said:
I'm sorry, but can you upload the fie again?
That baidu link above doesn't work anymore.
Sent from my LG-SU760 using XDA Free mobile app
Click to expand...
Click to collapse
Link just use Google Translate > Russian to English , Everything is here :good:

mrroks said:
Link just use Google Translate > Russian to English , Everything is here :good:
Click to expand...
Click to collapse
I cant find it even though I saw with Chrome Translation.
Can you upload those file in any cloud storage.
If you can, it will be very thankful, because my Korean friends had LU6200 bricked.
Sent from my LG-SU760 using XDA Free mobile app

I am following all the steps. eMMC software showed that it QPST server not running. I ran eMMC download tool with Admin rights and that problem was gone.
Now when I Press download button this error pops up showing Image Download Failed. Cookie(if present) not received.
Is there a solution for that?

saaqirajput said:
I am following all the steps. eMMC software showed that it QPST server not running. I ran eMMC download tool with Admin rights and that problem was gone.
Now when I Press download button this error pops up showing Image Download Failed. Cookie(if present) not received.
Is there a solution for that?
Click to expand...
Click to collapse
i get the same error

saaqirajput said:
I am following all the steps. eMMC software showed that it QPST server not running. I ran eMMC download tool with Admin rights and that problem was gone.
Now when I Press download button this error pops up showing Image Download Failed. Cookie(if present) not received.
Is there a solution for that?
Click to expand...
Click to collapse
I am also getting the same error.

saaqirajput said:
I am following all the steps. eMMC software showed that it QPST server not running. I ran eMMC download tool with Admin rights and that problem was gone.
Now when I Press download button this error pops up showing Image Download Failed. Cookie(if present) not received.
Is there a solution for that?
Click to expand...
Click to collapse
i am also getting the same error

saaqirajput said:
I am following all the steps. eMMC software showed that it QPST server not running. I ran eMMC download tool with Admin rights and that problem was gone.
Now when I Press download button this error pops up showing Image Download Failed. Cookie(if present) not received.
Is there a solution for that?
Click to expand...
Click to collapse
Put the file at drive C: :fingers-crossed:

Sideload Addison Oreo 8.0 Update noob thread

This is a tutorial for noobs. It is meant to provide information that you may or may not need, nonetheless it should get you from stock 7.1.1 to 8.0 Oreo regardless of your geographic location.
I am not responsible if you mess up your phone, however this is pretty safe since it has checks in place and will simply fail if you don't have the proper version of 7.1.1 on your phone.
METHOD 1 confirmed by @alypotter1 and @kingstu
A simplified way of updating using your device only. Untested by me but confirmed to be working.
Download
Move this zip file to the root directory of your internal storage
Go to Settings>Apps and Notifications>App permissions>Storage. In the top corner select the dots and activate 'Show system'. Find 'Motorola Update Services' and activate it
Reboot your device
The update should be detected by Update services automatically
METHOD 2
Prerequisites:
Your phone is up to date (Feb security patch-NPNS26.118-22-2-17)
Motorola Drivers - This is kinda a pain to find, most links take you to an old version not compatible with Windows 10
Moto Z Play Oreo update
ADB turned on-Developer options (Activate under About Phone>Build number hit repeatedly)-USB Debugging
Procedure:
1. Download the files, ADB is already included with the update file
2. Make sure you have Motorola drivers installed and ADB enabled
3. Unzip the files and open a command prompt in windows
4. In cmd, browse to the folder containing the files using cd (File location)-switch drives if you need to using D:, C:, etc
Your Phone:
1. Turn it off
2. Hold the power button and volume down until it starts in AP Fastboot mode
3. Hit Vol down until you see Recovery Mode
4. Hit Power button to enter it-You should see an Android on his back and 'No command'
5. Hit Power and Vol up at the same time to enter download mode - This may take a few tries, removing your case may make this easier
6. Press Vol down to get to 'Apply update from ADB' and hit the power button
7. Now you're ready to connect to your PC
Back to the PC:
1. Once connected windows should detect it and install the correct drivers (You should hear the windows 'new device' notification)
2. Type adb devices in the command window
You should see something like:
Code:
List of devices attached
ZY123SZC57D sideload
If not, you need to diagnose why windows is not detecting the device
3. Now type adb sideload update.zip
The phone will display progress updates as the update sideloads. This can take approx. 30 minutes (some have reported it taking up to an hour!). Resist the urge to assume it has hung at any point, walk away if you have to.
If I missed anything please let me know.
Alternate Google drive link-Use only if Mega is not working
Special thanks @talktosam for uploading the original update files
How to root 8.0.0
Details:
Code:
Version 8.0.0
Software Channel: Remains unchanged
Security patch: April 1st
Baseband: M8953_10238.63.04.83R ADDISON_ROW_CUST
Kernel: 3.18.71-perf-g174984b
Build: OPN27.76-12-22

scottdanpor said:
This is a tutorial for noobs. It is meant to provide information that you may or may not need, nonetheless it should get you from stock 7.1.1 to 8.0 Oreo regardless of your geographic location.
Prerequisites:
Motorola Drivers - This is kinda a pain to find, most links take you to an old version not compatible with Windows 10
Moto Z Play Oreo update
ADB turned on-Developer options (Activate under About Phone>Build number hit repeatedly)-USB Debugging
Procedure:
1. Download the files, ADB is already included with the update file
2. Make sure you have Motorola drivers installed and ADB enabled
3. Unzip the files and open a command prompt in windows
4. In cmd, browse to the folder containing the files using cd (File location)-switch drives if you need to using D:, C:, etc
Your Phone:
1. Turn it off
2. Hold the power button and volume down until it starts in AP Fastboot mode
3. Hit Vol down until you see Recovery Mode
4. Hit Power button to enter it-You should see an Android on his back and 'No command'
5. Hit Power and Vol up at the same time to enter download mode - This may take a few tries, removing your case may make this easier
6. Press Vol down to get to 'Apply update from ADB' and hit the power button
7. Now your ready to connect to your PC
Back to the PC:
1. Once connected windows should detect it and install the correct drivers (You should hear the windows 'new device' notification
2. Type 'adb devices' in the command window (without quotes)
You should see something like: List of devices attached
ZY123SZC57D sideload
If not, you need to diagnose why windows is not detecting the device
3. Now type 'adb sideload update.zip'
The phone will display progress updates as the update sideloads
If I missed anything please let me know.
Alternate Google drive link-Use only if Mega is not working
Special thanks @talktosam for uploading the original update files
Click to expand...
Click to collapse
welcome, may be this is our last soak test for z play... see u guys any custom rom threads..

talktosam said:
welcome, may be this is our last soak test for z play... see u guys any custom rom threads..
Click to expand...
Click to collapse
Yes this should be the last major update for Moto Z Play. Anybody looking for 8.1+ will need a custom rom.

So this update, which appeared today on retin, could be safely installed on reteu?

yaatzek said:
So this update, which appeared today on retin, could be safely installed on reteu?
Click to expand...
Click to collapse
Yes the update is the same, we just have to wait for it to be distributed to our devices. I'm on tkpca and it has not released yet on that channel.
After the update you will have version 8.0.0, and will still be on software channel reteu in your case. Security patch is April 1st.

scottdanpor said:
Yes the update is the same, we just have to wait for it to be distributed to our devices. I'm on tkpca and it has not released yet on that channel.
After the update you will have version 8.0.0, and will still be on software channel reteu in your case. Security patch is April 1st.
Click to expand...
Click to collapse
any software channel can update this ota safely... no matter retin, reteu, br etc

Hi all,
It worked for me!
Thanks to @scottdanpor for this post!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm on 7.1.1 June 1, 2017 security patch (NPN26.107). Wondering if this OTA will work for me.

boonhoong said:
I'm on 7.1.1 June 1, 2017 security patch (NPN26.107). Wondering if this OTA will work for me.
Click to expand...
Click to collapse
Give it a try, it will either install or fail to install without making any changes.

boonhoong said:
I'm on 7.1.1 June 1, 2017 security patch (NPN26.107). Wondering if this OTA will work for me.
Click to expand...
Click to collapse
Flashing this official Oreo OTA will likely fail, as your device does not have the correct build. You need a clean, fully stock firmware with either the Feb 2018 7.1.1 security patch (build NPNS26.118-22-2-17) or the Oreo last soak test patch (OPN27.76-12-22) to flash this:
Package expects build thumbprint of 8.0.0/OPN27.76-12-22/24:user/release-keys or 7.1.1/NPNS26.118-22-2-17/21:user/release-keys

Is there a guide on what to do with unlocked boothloaders? I'm on Oreo SOAK 2 (or maybe 3) with TWRP. How can I fully unroot, replace bootlader/recovery, and lock the device? There used to be a guide for Nougat, but since I updated to SOAK, I haven't been able to go back to stock.

goncalesi said:
Hi all,
It worked for me!
Thanks to @scottdanpor for this post!
Click to expand...
Click to collapse
what compile number did you have before installing this update?

fuelvolts said:
Is there a guide on what to do with unlocked boothloaders? I'm on Oreo SOAK 2 (or maybe 3) with TWRP. How can I fully unroot, replace bootlader/recovery, and lock the device? There used to be a guide for Nougat, but since I updated to SOAK, I haven't been able to go back to stock.
Click to expand...
Click to collapse
You need to unroot and restore stock recovery and move forward. Your best bet might be to just wait for 8.0 complete flash firmware. That's why I stayed away from the soak installs, can be a real hassle.

_heberlopez95 said:
what compile number did you have before installing this update?
Click to expand...
Click to collapse
I was with the feb/2018 security patch before the update

Hi guys! How long does the update takes?
Mine is at 58% (patching system image after verification on phone) for a long, long time.
Just asking, because I'm pretty sure it's not stuck.

Do you know if this will work on Verizon variant? (Moto Z Play Droid XT1635-01)

marcuspereira said:
Hi guys! How long does the update takes?
Mine is at 58% (patching system image after verification on phone) for a long, long time.
Just asking, because I'm pretty sure it's not stuck.
Click to expand...
Click to collapse
It takes quite a while, and it does hang for a while on 58%, just walk away for a bit.

rusa-raus said:
Do you know if this will work on Verizon variant? (Moto Z Play Droid XT1635-01)
Click to expand...
Click to collapse
My guess would be no. Verizon likes to do things differently.

I'm stuck at 77% for 10 minutes now :/

yaatzek said:
I'm stuck at 77% for 10 minutes now :/
Click to expand...
Click to collapse
Don't touch it.

How To Guide Flash TCL Firmware TPST Tool / Includes links to Official FW

(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:​
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________​​TPST Tool User Guide​Catalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 Purpose​This user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 Intro​TPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. Install​Before upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver​(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.2 Install TPST​(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model​(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software​3.1 Run TPST​(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)​
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.

Hi, i ve flashed android 12 beta 3 but now i can't return back to android 11. I ve follow the guide same procedure as per android 12 but After flashing stabile android 11 i can enter only in fastboot .

how did you guys even get android 12? it says my phone is corrupted

yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted

dieudeglace said:
yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted
Click to expand...
Click to collapse
Did you try the beta 3?

Whatever the beta was on their website, if you have some sort of other version I'll take it.

dieudeglace said:
Whatever the beta was on their website, if you have some sort of other version I'll take it.
Click to expand...
Click to collapse
404
www.tcl.com

Jamesblondca said:
404
www.tcl.com
Click to expand...
Click to collapse
Pay attention to the CU number, thats how I got mine stuck on beta 3
but at least it works, jsut dont know if it will ever get upgraded.

I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots

o.class.jav said:
(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:​
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________​​TPST Tool User Guide​Catalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 Purpose​This user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 Intro​TPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. Install​Before upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver​(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
2.2 Install TPST​(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model​(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software​3.1 Run TPST​(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)​
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.
Click to expand...
Click to collapse
Why doesn't it show me a log line in my tpst ???

line two create xlm log is not seen on my pc why can it happen??

I know this is the TCL 20 section, but I see the screen shot has T799H... do you happen to actually have the T799H driver MSI?

Hello, I can't find the brush bag of t810h

你好，我在官网找不到t810h的刷包，然后T810刷包转砖

dieudeglace said:
I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots
Click to expand...
Click to collapse
Does it say so?

xer. said:
Hello, I can't find the brush bag of t810h
Click to expand...
Click to collapse
bro not brush bag but rom，it means刷书包hhh

MU.Eu said:
Does it say so?
Click to expand...
Click to collapse

MU.Eu said:
Does it say so?
Click to expand...
Click to collapse
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.

o.class.jav said:
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.
Click to expand...
Click to collapse
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)

o.class.jav said:
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Click to expand...
Click to collapse
Also, all of the tool downloads work still in this post. Download the tools- use the Android 12 ROM and follow the instructions. You can restore your phone.

12" Chinese Review Mirror Bootloader Unlock/Firmware Update/Theme

Using Ubuntu inside VirtualBox:
Ensure your VirtualBox is setup to see all USB devices, has internet, folder share, and drag & drop enabled.
1. Go to files and create a folder under /home/username/ called “Media”
2. Give permissions to the folder and all subsequent files by right clicking, going to properties, and setting them to allow “create and delete files”.
3. Give permissions for local network share by sharing folder, allowing others to create and delete files in the folder, and allowing guest access.
4. Inside the “Media” folder you will place a modified fastboot zip folder and extract it’s contents into this location. The zip file can be downloaded from here: Modified_fastboot
Now that you have your Computer setup, let’s get started.
--------------------------------------------------------------------------------------------
Prepare Android Mirror: (Plugged into CPU via USB)
1. Power on Android mirror.
2. Go to "Settings".
3. Scroll down and select "System".
4. Scroll down and select "About phone".
5. Scroll all the way down and click on build number until developer mode is unlocked.
6. Click on "Baseband version" 4 times to access EngineerMode.
7. Select "DEBUG&LOG".
A. Enable Never Screen Off.
B. Disable Watch Dog.
C. Enable USB Debug.
D. Allow USB debugging “Always on this computer”, and select “ok”.
8. Click the back arrow far left bottom 2 times until back in System settings.
9. Now you should see “Developer options”. Select it and turn it on.
A. Enable Stay awake.
B. Enable OEM unlocking.
C. Verify USB debugging is enabled.
D. Enable Adb Root Privileges. Pin = 2846
10. Device is now ready.
--------------------------------------------------------------------------------------------
Using Windows with Ubuntu installed within Virtualbox:
To get into fastboot:
1. Ensure you have the latest platform tools for windows. This can be downloaded from here:
Win Platform Tools
2. Extract contents to a folder.
3. Open extracted folder, right click in folder, where you see adb.exe, and select “Open in Windows Terminal”.
**** These next steps I found are to be done in a specific order and time so pay close attention ****
4. Type “./adb devices”. Press enter after the beep sound and the 4G loading screen disappears.
./adb devices
Click to expand...
Click to collapse
If done correctly you will see the following:
List of devices attached
XXXXXXXXXXXXXX device
5. Type “./adb reboot bootloader”.
./adb reboot bootloader
Click to expand...
Click to collapse
6. Press enter. - Must be done before the screen goes black and you hear the next beep. If done correctly you will see on the far left:
fastboot mode
7. You are now in fastboot mode. Try not to take too much time with unlocking the bootloader as this may timeout and take multiple tries.
--------------------------------------------------------------------------------------------
Within Ubuntu:
Unlocking bootloader within Fastboot:
1. Open the modified_fastboot folder, right-click then select Open in Terminal.
2. Setup permissions for user by entering the following one at a time followed by enter.
sudo -i
Click to expand...
Click to collapse
sudo usermod -aG plugdev root
Click to expand...
Click to collapse
cd /home/po/Media/modified_fastboot
Click to expand...
Click to collapse
3. Test device detection using:
./fastboot devices
Click to expand...
Click to collapse
4. Get identifier Token using:
./fastboot oem get_identifier_token
Click to expand...
Click to collapse
5. You should get an output like:
Identifier token:
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
OKAY [0.019s]
finished. Total time: 0.019s
6. Copy the Identifier token.
7. Run this command ; replace XXXXXXXXXXXXXXXXXXXXXXXXXXXX with your Identifier token. Should look like this:
./signidentifier_unlockbootloader.sh XXXXXXXXXXXXXXXXXXXXXXXXXXXX rsa4096_vbmeta.pem signature.bin
Click to expand...
Click to collapse
8. You should have an output like:
Identifier sign script, ver 0.10
1+0 records in
1+0 records out
50 bytes copied, 0.000257562 s, 194kB/s
Identifier sign successfully
9. You should also see a signature.bin file in the modified_fastboot folder.
10. Finally run this command:
./fastboot flashing unlock_bootloader signature.bin
Click to expand...
Click to collapse
11. When it asks to confirm bootloader unlock (volume up/volume down options):
Locate the A/V port on the top of the device, looks like a 3.5mm plug, and use a small ½” long device/toothpick/paperclip to push the button on the inside of the port at the bottom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
12. The status should now say:
Begin to erase user data…
This takes >5mins to accomplish
13. Once completed successfully, the status will say:
Info: Unlock bootloader success!
14. Wait 2 minutes and hold the power down to restart the device. The device will restart a few times and will now indicate the bootloader unlocked on the left side of mirror.
--------------------------------------------------------------------------------------------
Update to latest firmware:
1. Go to and read through the Original Post, Original Post in Russian, and ensure your device is the same device or very similar in design. If not you should not update with the mentioned firmware.
2. Download firmware update:
QC_BITE_M5_188_Media_Sleep_2021010619_202101061959_64bit.pac
The tools that will be needed and instructions:
1.Go to this website, https://spdflashtool.com/
2. Download latest version of Research Tool here: Research-tool
3. Follow instructions on how to use the Research Tool here: Instructions
A. Here is the link for the SPD driver you will need: Drivers
B. Stop at step 8 do not connect your mirror to the computer. Make sure your mirror is turned off and follow this video to complete the installation process:
--------------------------------------------------------------------------------------------
If you would rather complete with written tutorial vice watching video, here are the remaining steps.
1. Turn off the mirror if not done already.
2. Ensure firmware loaded into the Research tool and press the Play/start button.
3. With something small like a toothpick/paperclip, press the button inside the AV port at the top of the mirror. Make sure you find the button before proceeding.
4. Once you have found the button, press it and hold it.
5. Then connect the mirror to the computer with your other hand.
6. The firmware will start to download. You can now release the button.
7. Now you wait until complete and reboot(s) complete.
--------------------------------------------------------------------------------------------
Additional/Optional:
Not promoting anything, but kinda am. I get nothing in return for advising to use of any tools. This one here has helped me more than i can explain and was created by an OG of XDA, Koushik Dutta, aka. Koush. He is most famous for his work with Clockwork-mod. Show him some support if you like his work.
Tool to control pretty much any android device from your computer: Vysor
https://www.vysor.io
Here is a video showing you how to use the program. It is done with a Firestick, but once I was setup it just found the mirror itself once I plugged it in as well as my cell phone:
--------------------------------------------------------------------------------------------
Now that your bootloader is unlocked and your system is up to date, you may want to customize things a bit as most on XDA do. This is super new to me, like only 2 days working on this mirror.... I did however find a legit app, through playstore, to customize your home screen to not look like so tacky/boring. The app is called Car Launcher. There is a free version and a paid one. Paid version unlocks so much customization. I recommend installing the free version and testing it out. If all works, then the paid version is the way to go. I know the paid works very well with the above firmware. I have tested it quite extensively and so far found only one hick-up. Here are the links.
Recommended Home replacement: Free
Car Launcher Free
PRO Version is much better: cost $4.99
Car Launcher Pro
Whatever you do, don’t use program brightness settings in the themes or Car Launcher. Use the device’s settings.
Good place for some cool backgrounds I found for my Caddy that has other vehicle designs is: www.el-tony.com
Credit goes to a few places:
Iamrance.asa Bootloader Unlock
Hovatek Bootloader Unlock
Troypoint Vysor Setup
4PDA Threads
SPD Research Tool Guide

Saved for updates and customizations

Mod edit - translated by https://www.deepl.com/translator:
Hi I have a device szkj d 30 10 inch android 8.1 mirror that reboots all the time and goes into recovery on retry!Even if I do the reset it gets stuck in the same position.How do I do the data factory reset if it is stuck and won't turn off!!!!
VNDITORE Amazon says motherboard is broken!!!!
***************************
Ciao io ho un dispositivo szkj d 30 10 pollici android 8.1 mirror che si riavvia in continuazione e va in recovery su riprova!Anche se faccio il reset si blocca nella stessa posizione.Come faccio a fare il data factory reset se è bloccato e non si spegne!!!!
Spoiler
VNDITORE Amazon dice che si è rotta la scheda madre!!!!

Hello @po8pimp. Thank you very much for this tutorial, it is very useful. Hopefully someone can make a custom rom for these mirror.
I have a similar mirror, i think from HGDO brand, 4GB RAM 32Gb ROM with the firmware QC_1126bit_M5_1126_media_sleep_2020112517
Can I use your method and install that firmware?
In other hand I cant logout a google account from the mirror. Do you know how to delete and account from it?
Thank you

cregi said:
Hello @po8pimp. Thank you very much for this tutorial, it is very useful. Hopefully someone can make a custom rom for these mirror.
I have a similar mirror, i think from HGDO brand, 4GB RAM 32Gb ROM with the firmware QC_1126bit_M5_1126_media_sleep_2020112517
Can I use your method and install that firmware?
In other hand I cant logout a google account from the mirror. Do you know how to delete and account from it?
Thank you
Click to expand...
Click to collapse
I will have to check on the firmware ability. As far as the google account logout, you will more than likely have to factory reset the device.

cregi said:
Hello @po8pimp. Thank you very much for this tutorial, it is very useful. Hopefully someone can make a custom rom for these mirror.
I have a similar mirror, i think from HGDO brand, 4GB RAM 32Gb ROM with the firmware QC_1126bit_M5_1126_media_sleep_2020112517
Can I use your method and install that firmware?
In other hand I cant logout a google account from the mirror. Do you know how to delete and account from it?
Thank you
Click to expand...
Click to collapse
Phisung Z66 и клоны - Смарт-зеркало заднего вида - 4PDA
Phisung Z66 и клоны - Смарт-зеркало заднего вида, [Автомобиль][Зеркало][Видеорегистратор][Android]
4pda.to
This is the forum you would want to find your firmware for your device in. I recommend if you don't know Russian to get a browser with add on support to translate the pages for you. I use Firefox and Translate web pages extension which works really well.

hi i have this mirror following the guide, "./adb device" command list the device, but i can't get it to go into fastboot mode with "./adb reboot bootloader" command ...is there another method using combination of buttons?

[EOL][ROM][UNOFFICIAL][12.1] LineageOS 19.1 for Galaxy Note10 5G [d1x][N971N][ENCRYPTION]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Known Issues
You tell me
Requirements
Required firmware version is N971NKSU2HVE9.
Instructions
You can follow the instructions on the wiki page for d1: https://wiki.lineageos.org/devices/d1/install
Please remember to upgrade your firmware through Odin. Put the provided file in the BL slot.
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads
Builds: https://sourceforge.net/projects/lineageos-samsung-note10-5g/files/lineage-19.1/
GApps: https://wiki.lineageos.org/gapps.html
Firmware: https://sourceforge.net/projects/firmware-samsung-note10-5g/files/
Source
https://github.com/Rocky7842/android_kernel_samsung_exynos9820/tree/lineage-19.1
Contributors
Rocky7842
Linux4 for maintaining the trees for exynos982x devices.
LineageOS team

About Safetynet
The safetynet on this ROM can pass basic integrity, but not CTS.
Due to the official stance of LineageOS team, and spoofing the build fingerprint may causes issues because Android uses build fingerprint changes as a signal to clear and rebuild several caches, I will not put the modifications in the ROM itself. Instant I'll put the information here, you can choose to do it or not.
To pass CTS:
We have to install Magisk(or Lygisk), then install both Universal SafetyNet Fix and MagiskHidePropsConf modules.
Reboot, enter adb shell.
In adb shell, type in "props". Now Magisk should ask you for su, accept it.
Type in "1". Which is edit device fingerprint.
Type in "samsung/d1xks/d1x:12/SP1A.210812.016/N971NKSU2HVE9:user/release-keys".
Type in "y" to confirm.
Type in "n" to avoid reboot now.
Type in "b" to go back to main menu.
Type in "5". Which is add/edit custom props.
Type in "n". Which is new custom prop.
Type in "ro.build.version.security_patch".
Type in "2022-05-01".
Type in "y" to confirm.
Type in "y" to reboot.
Now the security patch date and build fingerprint should be what we set, and Safetynet should pass now.

Working, I can confirm

A working rom for d1x, am I dreaming?

jamesrrred said:
A working rom for d1x, am I dreaming?
Click to expand...
Click to collapse
Give it a try and you'll know if it's a dream or not.

jamesrrred said:
A working rom for d1x, am I dreaming?
Click to expand...
Click to collapse
Thanks to Rocky7842

jamesrrred said:
A working rom for d1x, am I dreaming?
Click to expand...
Click to collapse
Please give some feedback if you already try it.

Rocky7842 said:
Please give some feedback if you already try it.
Click to expand...
Click to collapse

Bro can you give me rooting tools for note 10 N971N? Please or even just the link bro please!

JÅ“508 said:
Bro can you give me rooting tools for note 10 N971N? Please or even just the link bro please!
Click to expand...
Click to collapse
What do you mean...? Just use magisk.

Rocky7842 said:
What do you mean...? Just use magisk.
Click to expand...
Click to collapse
i want to root my samsung note 10 n971n version. Maybe you can help me

I don't know where to download the root files.

Enable Developer Options
Under developer options enable OEM unlock
Download latest firmware for your phone
Go-to https://galaxyfirmware.com/model/SM-N971N/
Download the right file for your device (just choose one)
Download magisk
Once this is downloaded, we can install it.
With that done, extract. The contents of the firmware you downloaded earlier.
Copy the AP file onto your phone.
Now open magisk app and tap on the install button and, make sure that the recovery mode Option stays checked, now tap the next option to bring us to the method which lets us select and patch a file.
Locate that AP file and then load it up into magic before tapping. The, let's go button.
After magisk is done patching the files..
Now you're going to be told that there is an output file, You just need to make sure that we look at where this file is and copy it to your PC.
Put the device into download mode,
Now extract the Odin program and open it
connect phone to PC
disable the auto reboot option under options tab
Locate the firmware that was downloaded and the patched file.
start loading these files into Odin.
click the BL button and load the file that begins with the letters BL.
Remember the same with the CSC and we need to load the CSC file (not the home CSC file).
Now click the AP button right here, but instead of loading, the AP file, instead we're going to load the AP file magisk patched.
there is a progress bar on the phone itself as well on the PC.
So once you get a green pass message
Device is not going to reboot because we need to manually reboot to instantly however.
With Odin finished, unplug USB cable. now, We're going to press the VOLUME DOWN and the SIDE BUTTON till the screen go black, let go of the VOLUME DOWN button while still holding the SIDE BUTTON and press and hold the VOLUME Up button. So you're gonna press these two buttons to force the device to reboot.
After reboot locate and open magisk

VoLTE Supported?

Alexis Levin said:
VoLTE Supported?
Click to expand...
Click to collapse
VoLTE is not supported.

New build uploaded. Security patch date is now 2022-11-05.

I flashed recovery using Odin and can enter Lineage recovery mode successfully.
But when I use adb sideload <ROM.zip>, it cannot detect my devices to sideload the custom ROM.
There's no devices under adb devices either.

ngfuong said:
I flashed recovery using Odin and can enter Lineage recovery mode successfully.
But when I use adb sideload <ROM.zip>, it cannot detect my devices to sideload the custom ROM.
There's no devices under adb devices either.
Click to expand...
Click to collapse
If you sure you have put the phone into sideload mode, check your cable/driver or change a computer.

Rocky7842 said:
If you sure you have put the phone into sideload mode, check your cable/driver or change a computer.
Click to expand...
Click to collapse
Thank you for replying. I changed to Linux and now I can sideload the .zip file.
However, after sideloading using this command:
adb sideload lineage-19.1-20221113-UNOFFICIAL-d1x.zip
The phone returns this:
E: Signature verification failed
E: error: 21
Then I choose Install anyway, and receive:
Installing update...
E: Failed to find update binary META-INF/com/google/android/update-binary
Any idea what I missed?

ngfuong said:
Thank you for replying. I changed to Linux and now I can sideload the .zip file.
However, after sideloading using this command:
adb sideload lineage-19.1-20221113-UNOFFICIAL-d1x.zip
The phone returns this:
E: Signature verification failed
E: error: 21
Then I choose Install anyway, and receive:
Installing update...
E: Failed to find update binary META-INF/com/google/android/update-binary
Any idea what I missed?
Click to expand...
Click to collapse
Please try re-download the file. If it still fails, try install the "20221023" build.
I didn't test the "20221113" version since I'm doing the bring up of A13. There's a possibility that the file was corrupt in the uploading procedure. No one reports that so far, though.