Hi guys I got favor I just import a bunch of spheres and now when is 5 or 10 min to the hour in point the watch is showing me one hour less when it hits example 22:01 then is showing it propely.
I can't find any option in facer. Any help please?
Now is 00:53 in my watch it says 23:53 and as soon as it hits 00:01 it will say 01:00 which it will be the proper time...
And I can't edit those faces in facer cos it doesn't appear anything.
Related
So I downloaded and installed Kavana's (sp?) 6.1 on my phone formerly known as the Dash. Anyway, the clock shows the correct time. I haven't fiddled to much with it yet, but noticed last night after midnight, that the digital clock at the very top when you're not on the home screen, showed 00:30 instead of 12:30. Not that it's a big deal, but just wondering why that is. All other hours showed as 9, 10, 11 etc on the PM side, but when it got to midnight, it showed 00:21 or whatever the time was. The clock on the home screen showed 12:whatever but whats with it?
because technically 12:30am is 00:30 till 1:00am.
That is how time is told.
every clock i have at home does that, its normal dont worry about it
zeritooverride said:
every clock i have at home does that, its normal dont worry about it
Click to expand...
Click to collapse
u got some crazy ass clocks ha ha im playin.. but they are right.. so dnt really wrry bout
zeritooverride said:
every clock i have at home does that, its normal dont worry about it
Click to expand...
Click to collapse
Really? I've never owned a clock, watch or anything that showed like that unless it was set to 24 hr time. When set to 12 hr time, it should say 12:30 am not 00:30. Only suggestion I have, is go to bed early and you'll never know.
showaco said:
Really? I've never owned a clock, watch or anything that showed like that unless it was set to 24 hr time. When set to 12 hr time, it should say 12:30 am not 00:30. Only suggestion I have, is go to bed early and you'll never know.
Click to expand...
Click to collapse
Or kill ClockOnTop so it doesn't confuse you.
Its not that its a big deal. I use a 24 hour clock at work every day but if its going to show 00:30 for example, then why doesn't 11pm show up as say 23:00? Only the midnight hour does it. 1pm shows 1 and not 13 etc so I was only wondering why the midnight hour is like that. No clocks anywhere are like that at all. Its either a 12 hour format or a 24 hour format period.
well u can change it to 24
Ill look for the setting in the clock settings. Thanks swaney. I wasn't sure if you could change it to a 24 hour format. Hopefully when I change it to 24 the midnight hour won't show up as 12. Lol. Then I'm sure it was a backwards coding error.
Either Way Its Not Gonna Be Twelve Ots Still Gonna Be 0:00 Cuz Its The Begginnin Of A New Day
Yeah. It is 00 either way. Coding error.
Anyone know of a program that will chime every hour?
I have got this on my timex datalink watch that chimes every hour and I have the option to set the period when it chimes ... for eg. from 8am to 6pm ... after that no more chimes till 8am again!
Thanks for any pointers
Use the search button on this forum, and you will go to my topic...
Download PocketAlarm for WM version 2.18.5 from 30.03.2008. This is not only has an alarm but also has an chiming feature for 30 or 60 minutes intervals.
Hello everyone,
I know the alarm free date #SAD...# is a beta feature at the moment, but I've run into a bug with it that I thought you should know about.
I have a section on a widget where I show the next alarm date and time, but I want to also show bedtime, which would be the alarm minus 8 hours. I know for standard dates, I can do something like #D-480...# if I want to subtract 8 hours. I can even do math within the variable, such as #D-$(8*60)$...# to subtract 8 hours. When I try this same sort of thing with the alarm free date variable, I find that it compounds amount added or subtracted each minute until something causes it to reset.
To make a simple example, if my alarm is set for 3:30 on Monday, and if I want to display the alarm time with 1 minute subtracted from it, I use #SAD-1 P:mm p#, and I should get 3:29am on Monday. It works correctly for the first minute, but as soon as another minute passes, I see that the the adjusted alarm time now shows 3:28am. So every time a minute passes, the adjusted alarm time gets multiplied by the number of minutes passed since I saved the widget. If I subtract 2 minutes at a time, then I see the time drop by 2 minutes as each minute passes. If I do 8 hours, then, well, it gets very strange very quickly.
I have noticed that the adjusted alarm time will reset from time to time, going back to the correct calculation for a minute, but I'm not sure of what causes the reset. Sometimes it will go back to the correct calculation after editing the widget, and sometimes it won't. Other times it will go back to the correct calculation after my screen has been off for a little bit and then I turn the screen back on, but not every time. Also, it looks like it may not add or subtract additional increments while the screen is off. Again, with my example of subtracting 1 minute, if my screen timeout is 2 minutes, then by the time the screen turns off, I'll see 3 minutes subtracted in total. If I turn the screen back on 10 minutes later, it will still show the 3 minutes subtracted. The next minute that the screen is on, it will either reset to 1 minute being subtracted, or it will continue to 4 minutes subtracted.
FYI, I'm on a Samsung Galaxy Note 3, Android version 4.4.2, Sprint, rooted, but I am running on stock ROM and kernel.
I hope that this helps pinpoint where the bug may be. Please let me know if any other information is required.
Thanks,
Jeremy
Same problem here.
Hi,
In my calender widget, I use
Code:
$#C0SRd#>0?#C0SRdd#$$#C0SRd#=0&&#C0SRh#>0?#C0SRhh#$$#C0SRd#=0&&#C0SRh#=0&&#C0SRm#>0?#C0SRmm#$
Basically, I want to see time left from my next meeting.
The problem is, in my calander, I have both start time and end time. ( For example, Meeting with John, start-14:00, end-15:00).
The problem is with this code, as soon as start time begins(i.e. at 14:00), zooper possibly takes the end time (i.e. 15:00) as my C0SRmm and starts showing time left with that respect. So, w.r.t. the example above, if it is 13:05 on the meeting day, it will show 55 min. Which is expected.
But then, if the time is 14:00<current time< 15:00 , e,g. 14:25, it will show 35 min, i.e. time left from the end time...which I don't want.
Any help please?
Are you sure that's the behavior? For me, during an event, #C0SRm# counts the number of minutes from the event's starting time. In your example, for an event starting at 14:00, at 14:25 it will show 25 (really 26 as I see in practice).
ewcrider said:
Are you sure that's the behavior? For me, during an event, #C0SRm# counts the number of minutes from the event's starting time. In your example, for an event starting at 14:00, at 14:25 it will show 25 (really 26 as I see in practice).
Click to expand...
Click to collapse
Sorry...you are right...thats exactly what I get......and I don't want it. I just want to know when my meeting is....not how long the meeting is going.
Barud said:
Sorry...you are right...thats exactly what I get......and I don't want it. I just want to know when my meeting is....not how long the meeting is going.
Click to expand...
Click to collapse
Ok, what do you want it to say instead? Or do you want it to say nothing, or say something like "ongoing"?
I also have a countdown to my next event. I solved this problem using two copies of the countdown, one using event 0 and one using event 1. When event 0 is going on, I hide the countdown for 0 (by setting font size to zero using conditionals in the advanced parameters) and show the countdown for event 1. Otherwise, I hide countdown 1 and show countdown 0.
My test if event is occurring: #DyyyyMMddHHmm#>#C0SyyyyMMddHHmm#
If you just want to hide the countdown, you could add this to your existing conditionals.
My Huawei watch GT2 sometimes does not save workout. It records data normally, but when it should save it, the watch freezes and restarts. No workout is saved then.
It happened 3 times in last 30 days, always with Other workout (I used Other and Outdoor walking).
Did this hapen to you?
How can I prevent this?
About a 1,5 month ago, I installed 15 or so custom watch faces. Could that be the problem?