Related
I was bouncing around stores looking for a decent sling bag, and I found this swiss gear one for 28 dollars after tax. It has a main pouch for the xoom, a secondary pouch for the charger and hdmi cables, and a back pouch that may be able to fit the motorola bluetooth keyboard, I'm not sure. It feels very sturdy, is a tight comfortable fit (wont bounce around while on the run), and I think is totally worth the price.
This is what I use.
The keyboard fits perfectly in the back pocket and it's cheap!!
Is this sold online at Target? Cannot seem to find it.
EDIT: Is this it?
http://www.target.com/SwissGear-Mono-Sling-Black/dp/B001QT41Z4
Does the zipper close completely without trouble? Hard to tell from the photo.
I just picked one of these up. Nice inexpensive bag and Xoom fits great inside. Thanks!
See the man bag thread, this bag was mentioned along with others
Sent from my Xoom using XDA App
Will look for one tomorrow thanks!
Sent from my Xoom using XDA App
keitht said:
Is this sold online at Target? Cannot seem to find it.
EDIT: Is this it?
http://www.target.com/SwissGear-Mono-Sling-Black/dp/B001QT41Z4
Does the zipper close completely without trouble? Hard to tell from the photo.
Click to expand...
Click to collapse
yeah that's it. No zipper trouble at all. The bag has a warranty too.
I picked one of these up a couple weeks ago, just haven't had time to move in yet. Question I have after trying to move over to this bag is this. How is everyone putting their XOOM, charger and other misc. items in the bag without the worry that these other items will crack the screen on the XOOM? There's just doesn't seem to be a lot of padding for the XOOM and if say the power supply is in another pocket it could still be directly against the screen and one mishap and crack goes the screen. If you turn the XOOM around where it's facing the back, that leaves the screen open as well.
Granted I may be a bit paranoid, but there just doesn't seem like a lot of room for much else unless you want the XOOM at somewhat of a risk.
Let me know how you put your XOOM and other items into the bag, feedback appreciated.
I put my xoom, the charger, a 10 foot hdmi cable, a wii remote, and a classic controller pro in the bag. I probably wouldnt do this if I didnt have the official motorola folio case for the xoom on though.
My peeps have commented on how much they love my new purse! lol
I order the Cocoon Harlem CSN346 iPad/Netbook Sling from Amazon since is designed for iPads and Netbooks have better protection inside. I will post pictures when arrive.
Description
Here's a design to get jazzed about: our netbook/iPad sling features all the functional storage pockets and GRID-IT!™ system you expect from us, with an adjustable cross-body strap for convenience and mobility, no matter where you are and no matter what you do.
Features
Accommodates up to a 10" netbook/Apple iPad
Convenient pocket organizer for additional storage
Media pocket keeps small devices handy & allows you to listen to your tunes while your media player, smart phone or mp3 player is safely stored away
Adjustable cross-body strap
Strap adjusts from 11"~22"
Water resistant
GRID-IT!™
The Most Versatile Organization
System Available
GRID-IT!™ organization system – a rubberized woven elastic object retention system for gadget organization
Ideal for organizing iPad/netbook accessories, iPod, iPhone, BlackBerry and other digital devices
Versatile Organization
Endless configurations
Designed to hold items firmly in place
Back of GRID-IT!™ doubles as a mouse pad
Configure GRID-IT!™ your own way!
Dimensions
PRODUCT DIMENSIONS
W:15.25" x D:3.5" x H:8.5"
W:38.7cm x D:9cm x H:21.6cm
IPAD/NETBOOK COMPARTMENT DIMENSIONS
W:11.4" x D:1.2" x H:8.1"
W:29cm x D:3cm x H:20.5cm
GRID-IT!™ DIMENSIONS
W:8.25" x D:0.34" x H:7.5"
W:21cm x D:0.9cm x H:19cm
Weight
1.1 lbs
0.52 kg
Anyone got any suggestions?
Cheers
There are so many out there i wouldnt say any are bad unless they do not hold the phone, not too sure why you would want one for swimming as you will need to take the phone out to use it.
I didn't find anything waterproof yet (at least with a headphone socket). I now have a jabra bluetooth headset and I can use that to pause/get status from my running app so I'm less bothered about just using a ziploc bag for waterproof. (the headset is supposed to be rain-proof, and costs less than a new screen for the phone)
The included jabra armband is rubbish - needs elastic to be able to stay on my arm, so a suggestion would be good.
not exactly waterproof armband, but...
I bought an SGS2 specific neoprene armband (think it was the Belkin one) and if there's any chance of rain I first put my phone in one of those zippable/ziplock/sealable sandwich bags.
Makes it completely waterproof and the touch screen still works... although I don't know if I'd go for a swim with it...! Fine for running though.
As the official dock is way too expensive imo, I thought I'd start a thread where people can post their unofficial car docks they bought and the experiences they made.
So far I came across two docks, the [CAR] Passive holder from Brodit (2nd pic)
and one I found on ebay, sent from Hong Kong (pic below): Windscreen Car mount small (1st pic with text "one X")
This one also can be bought with various different mounting options. I am not sure how easy it will be to dock and undock the phone in the mount though, looks rather tight.
I think I will wait some more days / weeks before I'll buy something.
Any other car kits you guys found?
2nd looks pretty decent for a cheap mount
Here another one, brodit active, but really ugly...
chrishull85 said:
2nd looks pretty decent for a cheap mount
Click to expand...
Click to collapse
the problem is it's being sent from HKG, if customs here decide to have a look at it I end up paying CHF 35.- (double the amount that thing costs) customs service fee, I almost might as well buy an official one
I would get this one, but I need a seller here in Europe.
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
maxseemo said:
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
geenyous said:
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
Click to expand...
Click to collapse
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
maxseemo said:
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
Click to expand...
Click to collapse
Great find, thanks!
I will have to wait for it to pop up in Europe, if I buy from HKG I risk having to show it to customs which will cost me too much to justify...
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
maxseemo said:
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
geenyous said:
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
Click to expand...
Click to collapse
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
rikardo1979 said:
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
Click to expand...
Click to collapse
Just ordered one on amazon myself.
Your comment about not having to change the holder all the time convinced me and also the minimalistic design / small size.
GioDoe said:
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
Click to expand...
Click to collapse
It can definitely be used for that (did it with my HD2 myself), but the swivel one will also not cover the camera lense.
Just don't film yourself doing anything stupid...
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Shady Gambino said:
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Click to expand...
Click to collapse
Hey thanks for finding that.
This one here is pretty much spot on to what I been looking for:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
This is the one I purchased.
http://www.ebay.com.au/itm/160777560050?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I really like the way the suction on the windscreen works. Some of these other car mounts are horrible, they fall off after a few minutes, hours ect...
The fit of the HTC One X on the bracket is very tight, won't ever fall off.
Happy with this one.
Btw this one arrived... 6 days transit, not bad for HK.
The item is not the best though.
The neck is more stiff then my first erection when I discovered p0rn. Hard to bend.
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Not the best. Ebay didn't deliver.. usually they only have quality true? lol
Anyway, I will purchase that one from Arkon. Looks decent and can cater to multiple phones.
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
not bad this is, use to have one of these for my old HTC HD2
only problem is when you change your phone for something different,new than you have to sell this with the phone and buy a new one again.
So I've decide to go for some universal accessories as I was tired of changing the holders,dockings, chargers all the time. Especially in car access. as I always ended with reinstalling cabels, holders, etc..
But good solution for someone who don't mind to change or who's not changing phones often
andygatford said:
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
Click to expand...
Click to collapse
Sent from my Transformer TF101 using XDA
maxseemo said:
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Click to expand...
Click to collapse
Could you check the back of the phone holder itself, I ordered one just like yours and it has 'G21' stamped on the back. (G21 is the Sensation XL)
I can manage to get the phone in, but the fit is so tight I'm scared the screen will crack when I hit the first bump in the road...
maxseemo said:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
Click to expand...
Click to collapse
Yeah, it'll definitely fit with a TPU case as long as it's not super thick.
Has anyone seen a car dock for the G4? Or know of a good one that they recommend?
I had a universal one from my old phone.... couple comments on those types. Look into one that clamps from the sides(so maybe ones for iphone?) The one I have is bottom and top and it barely fits thanks to the size of this phone. Also, I doubt there will be one where you can still use the back button(thank you knock to unlock!) Finally, this phone is bigger and thus heavier. The mount I have is one that plugs into the "cigarette lighter" which works for my car. However, I would imagine you might have problems with a suction cup mount especially if it is a cheaper one.
I always used to buy the factory car mounts, but I switch phones so often, that it was getting a bit pricey. When I bought my G3 I bought the iBolt MiniPro. Finally, a mount I can use phone to phone. Here's the link to it on Amazon.
http://www.amazon.com/iBOLT-IBUC-33418-miniPro-Connect-Kit/dp/B00IJZYRCK
Ok thanks I'll check it out.
I got this one from my local Target and I love it... http://www.scosche.com/mounts/magicmount-landing. The best thing is the little metal price that you need to stick on your phone works just as well slipped inside of the back cover making it a non-permanent solution.
I highly recommend the iOttie One Touch mounts. You just push the phone into the holder, and there's a button in the middle that releases the spring loaded side clamps that locks the phone in place. To pick the phone back up, you squeeze a couple of tabs on the side right where you'd grab the phone naturally. I've got the old style in my car, and the new one with the telescoping mount in my wife's. Both are great.
They also have the very sticky type of suction cup that you renew by just running water over it. Ours both stick to the consoles that even have some texture on the plastic.
I've got the smaller size mount that I've had since getting an S4, but hers in the bigger size. The G4 fits OK in either.
Places like Meritline have them on sale frequently. I paid about $12 for the first one, and $15 for the newer one.
I got this iBolt when I had my Note 3, works great with the G3 and G4.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC/ref=sr_1_1?ie=UTF8&qid=1434102989&sr=8-1&keywords=ibolt+car+dock
I have one of those magnetic vent mounts and it turns out that the piece of metal fits perfectly behind the plastic back cover. Those magnets are strong enough to work through cases, though I have not received a case for the g4 to test it out.
They are usually on sale on amazon for $6
Update so got a cheap case from amazon and the magnet didn't work behind the battery cover, will try the plate between phone and cover like I had before with my S4. Only problem is the case back is rounded.
More sturdy - Waze user
I was thinking about getting the Qi sticker for the LG G4, after they get more in the US, then picking up the TYLT VU car charger http://www.tylt.com/vu-car/, but that would put it to far away in my vehicle.
So get either the ProClip https://www.proclipusa.com/ or the Pro.Fit http://www.pro-fit-intl.com/shopvsm.htm custom mount for my vehicle and then use the RAM Mounts http://www.rammount.com/components to convert and link them together in a good position for Navigation and Waze use in Horizontal or Vertical position.
This would allow me to use the Qi Charging (not capable on my current phone as it is a few years old) with any new phone I purchase, as why I am in this section is that I am leaning towards the LG G4 for my next phone.
Speaking of proclipusa they make custom smartphone holders and since their G4 holder is not out yet, they have a page to sign up and get notified when it comes out.
http://www.proclipusa.com/targetsections/lg-g4-car-phone-mounts.aspx
I'd highly recommend the Spiderpodium and just bend it into shape. It's super versital and minimal, but works fantastically as a car dock for my G4 and other phones. You can mount it in an air vent or really any sort of receptical, I have a slot for CDs and it Does just fine in there.
http://www.amazon.com/gp/aw/d/B00U8...iderpodium&dpPl=1&dpID=413qHPi24pL&ref=plSrch
The official maker is Breffo, but that one is very inexpensive and looks just fine.
These are the two I have in my cars.
http://www.amazon.com/gp/product/B00P053YQ2?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
http://www.amazon.com/gp/product/B008IOQ3K6?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Both are strong enough to hold the LG G Flex in the Otter Box Defender Case. I threw the metal plate on top of the battery put the leather cover back on and no issues.
I've just ordered a Brodit universal cradle (I swear by Brodit cradles and custom wired charging cables). I have installed a couple of 5v 3A USB voltage regulators wired in to a MicroUSB cable which pokes out just underneath my Brodit cradle location. Should give me plenty of juice for charging with Nav running.
According to Brodit, the universal holder is suitable for phones between 62-77 mm wide with a thickness of 6-10 mm. The G4 is 76.1mm wide with a 6.3mm to 9.8mm curved depth. Hopefully will fit fine! Will find out tomorrow!
phillymade said:
I got this iBolt when I had my Note 3, works great with the G3 and G4.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC/ref=sr_1_1?ie=UTF8&qid=1434102989&sr=8-1&keywords=ibolt+car+dock
Click to expand...
Click to collapse
That is exactly the one I had for my HTC One M8, worked like a champ. Can't use it with my Verizon G4 because the charging port is backwards.
I'm opting for a wireless charging dock (since I got the wireless charging quick circle case)
RedBullet said:
That is exactly the one I had for my HTC One M8, worked like a champ. Can't use it with my Verizon G4 because the charging port is backwards.
I'm opting for a wireless charging dock (since I got the wireless charging quick circle case)
Click to expand...
Click to collapse
?? I use it with my G3 and now my G4. Charges just fine.
Sent from my VS986 using Tapatalk
Little tough to explain. But I think the HTC cable that came with the one I got for my M8 is just the reverse of what the G4 has.
RedBullet said:
Little tough to explain. But I think the HTC cable that came with the one I got for my M8 is just the reverse of what the G4 has.
Click to expand...
Click to collapse
Yep, the M8 has the mini-USB port flipped to what the G4 has. So car mounts made for the M8 won't work with the G4 unless you modify it.
Car mode??
Is there a car mode for this device? I don't think it shipped with any kind of car app or anything...
daedalus1066 said:
I threw the metal plate on top of the battery put the leather cover back on and no issues.
Click to expand...
Click to collapse
I wonder if this will interfere with the NFC at all? I don't use NFC really so it isn't a big deal, just curious. Is it possible to stick the plate on the cover vice the battery since we have the option of a spare battery? Then I wouldn't have to worry about which Battery was in my phone.
Everyone you need to check out RAM Mounts! -- https://www.rammount.com/products/xgrip
I have two RAM Mount X-Grips. One on my motorcycle and one in my truck. RAM Mounts are modular mounts that you buy in pieces (they do sell kits) to serve the purpose you need and where you want to mount it. Due to its design it will securely hold most phones (my G4 with the spigen case fits) without any issue. It is easy to throw the phone in the mount and you never have to tighten anything down.
Example of configurations:
Motorcycle = handlebar U-bolt base + short arm + Standard X-Grip Mount
Truck = Adhesive flexible base + standard arm + Standard X-Grip Mount
Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).
I Umair I said:
Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).
Click to expand...
Click to collapse
http://www.amazon.com/Koomus-CD-Eco...Samsung/dp/B00JP0RTB4/ref=zg_bs_2407778011_19
I have the Koomus as well. It's major flaw is the part that pushes against the top of the CD slot may become loose as you remove the phone.
You can buy clones that attach to your vent or with VHB adhesive for as little as $4 from DX, aliexpress, etc.
http://www.brodit.com/productList.html?brand=OnePlus&model=One&pn=prod
you will need a car-specific hilder as well. its a little pricey but totally worth it (for me).
i have one of those for my Nexus 7 Tablet since some years, just works all fine
also used a specific holder for the Galaxy Nexus when I still owned the device.
cheers!
if you have a case, or if you are OK with removing your back cover and throwing a metal plate back there (this is what I did), this one works great!
http://www.amazon.com/gp/product/B00HUIL310?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
you just have to tape down the metal plate. I placed mine back there and about a day later I started losing signal...the plate had fallen towards the bottom of the phone and must have been blocking some antennas or something. moved it up, taped it in place, and its been solid and working great since. I use this every day to and from work and anywhere else I go without it ever budging. its so nice not having to clip the phone in.
Search Xiaopimei on Amazon ! Amazing and very cheap !
Xiaopimei is great, I agree
I've been using the Brodit/Proclip (same thing) for about a year now, great stuff. I can highly recommend it
I've ordered
http://www.banggood.com/REMAX-RM-03-Mobile-Navigator-Car-Outlet-Bracket-p-982977.html
I heard its great, and its pretty cheap, and universal size phone can hook to it.
Here is video description
https://youtu.be/qMYhr9YN9Ok?t=22s
Brodit for OnePlus One
Remember to buy a Proclip for your specific car to mount on
My experience, over the last 7 years. I swear to always buy Herbert Richter (HR) mounts. (ebay or online German/UK stores)
Extremely durable plastic (don't want your phone to fall). Universal, also use the same mount on my bicycle, in other cars. Mine has now been in use for 5 years now (have 2). I use the universal one and I use the vent holder in the car. Doesn't block the view and in summer gets cooled down because the airco blows cold air on it. Also doesn't damage the phone and really holds it well.
Also very good experience with their customer support.