Develop Bugs

[Q] Can I flash a stock firmware for a different region other than my original stock

First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.

qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I would also like to know the answer to this question as I have a New Zealand international model but the rom is old. Can I flash the UK version which is the most uptodate. (I have the wifi version).
Thanks

I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.

colint3 said:
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
Click to expand...
Click to collapse
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?

deviant_cryptic said:
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
Click to expand...
Click to collapse
I just downloaded the firmware and used Odin. It didn't wipe the sdcard it just updated the apps. Its worked well ever since.
I have since updated to N5110XXCMK1 using the same method.
Regards
Colin

Thanks. I used the same method to flash 4.2.2 on my device. I am also now on xxcmk1.
Sent from my GT-N5110 using Tapatalk

flash counter
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.

miguel0706 said:
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
Click to expand...
Click to collapse
1. My flash counter did not change when I flashed 4.2.2 using Odin.
But it did when I used auto cf root afterwards to root the phone.
2. Nope I haven't tried.
Sent from my GT-N5110 using Tapatalk

More...
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.

miguel0706 said:
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
Click to expand...
Click to collapse
have you found the answer?

yeeahnick said:
have you found the answer?
Click to expand...
Click to collapse
Not yet? Now im just waiting for the update to kitkat

i am having this prob too. does my gt-i9300 need to be rooted to flash a stock firmware from different country?

qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.

LHNothing said:
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
Click to expand...
Click to collapse
Update: flashing went great, just had to remove the .md5 at the end of the ROM file. Everything seems to be in order.

[Q] T-Mobile branded S3 somehow became AT&T.

When I received my S3, it was on a T-Mobile branded stock firmware 4.1.1. I wanted to try CyanogenMod, so I installed it, but didn't like it.
Here's where my problem begins. Upon wiping my phone back to stock to get rid of CyanogenMod, I find that it's now AT&T branded, despite the physical phone being a T-Mobile T999.
I tried rooting it and using CSC changers, but those tell me that the PreconfigUI is SingleCSC, and thus apparently unchangeable.
What I want to do is somehow get my phone back to T-Mobile branded stock.
P.S. I do not have a MicroSIM yet.

GraphicsApathy said:
When I received my S3, it was on a T-Mobile branded stock firmware 4.1.1. I wanted to try CyanogenMod, so I installed it, but didn't like it.
Here's where my problem begins. Upon wiping my phone back to stock to get rid of CyanogenMod, I find that it's now AT&T branded, despite the physical phone being a T-Mobile T999.
I tried rooting it and using CSC changers, but those tell me that the PreconfigUI is SingleCSC, and thus apparently unchangeable.
What I want to do is somehow get my phone back to T-Mobile branded stock.
P.S. I do not have a MicroSIM yet.
Click to expand...
Click to collapse
Can you go to your phone's settings => about device and check what the firmware settings are? Let's see what you have under firmware version, baseband version & build number. If possible, you may post a screen shot. Did you say you returned to stock by wiping your phone? Hardly seems likely and you would have probably needed to flash some firmware. Would you recall what you flashed?

Thanks for stepping up. My phone's info is:
Android Version is 4.1.1
Baseband is I747UCDLK3
Build is JRO03L.I747UCDLK3
I did not flash any firmware, as I had no reason to.

GraphicsApathy said:
Thanks for stepping up. My phone's info is:
Android Version is 4.1.1
Baseband is I747UCDLK3
Build is JRO03L.I747UCDLK3
I did not flash any firmware, as I had no reason to.
Click to expand...
Click to collapse
It's definitely on AT&T firmware. Apologies if I sound like I'm doubting you but are you certain it had T-Mobile firmware when you acquired it? I'd guess it was probably already an AT&T phone. If you bought it in the secondary market, there could have been some previous repairs involving parts swaps. Your safest bet may be to leave it as is and unlock for you use on T-Mobile. Trying to force on T-Mobile firmware now could result in a brick. As it is on 4.1.1, you can easily free unlock it by following the well tested method you'll find elsewhere in this forum.

No apologies needed. I forgot to state that the phone was purchased with the T-Mobile boot animation and bloatware already present, and that the model number printed below the battery is T999. I've got no clue if there was a parts swap or not. Is the method to unlock that's posted elsewhere that you're referring to the one that begins with you dialing *#197328640#? If so, i've tried it but never got the unlock message to show.

GraphicsApathy said:
No apologies needed. I forgot to state that the phone was purchased with the T-Mobile boot animation and bloatware already present, and that the model number printed below the battery is T999. I've got no clue if there was a parts swap or not. Is the method to unlock that's posted elsewhere that you're referring to the one that begins with you dialing *#197328640#? If so, i've tried it but never got the unlock message to show.
Click to expand...
Click to collapse
There could have been a previous JTag operation involving forced firmware installation on the MB. I've seen previous hybrid firmware involving one or other partition belonging to a different model - e.g. the modem, bootloader or something else but not the complete system.
Yes, that's the unlock method I was referring to. You won't get any confirmation that the process worked at the end. However, if you did it correctly, you would know it worked when you insert a non-compatible SIM card and it works. You should also be able to install T-Mobile apps especially the Wi-Fi calling app which is a really nice feature of T-Mobile.

I'm getting it microSIM'ed tomorrow. I'll see how that goes.
UPDATE: Successfully obtained and installed T-Mobile microSIM. Still wish to replace AT&T boot animation and bloatware with T-Mobile's, though.

GraphicsApathy said:
I'm getting it microSIM'ed tomorrow. I'll see how that goes.
Click to expand...
Click to collapse
OK. I'd be interested in knowing the outcome but I'll be surprised if it isn't unlocked already. Did some further research and there have been some reports of people successfully 'flashing' AT&T firmware on T-Mobile phones, and vice versa. Not sure why this should happen and conventional logic suggests the result should be a hard brick which is indeed the most common outcome. I'll also suggest you boot into download mode and see the information under bootloader. If the device has a T-Mobile bootloader, it may be possible to remove the OS via custom recovery and re-flash T-Mobile firmware.

Download mode currently gives Product Name as SGH-I747. Wiping AT&T OS via custom recovery and then installing the proper one sounds like a good lead. I eagerly await your instruction

GraphicsApathy said:
Download mode currently gives Product Name as SGH-I747. Wiping AT&T OS via custom recovery and then installing the proper one sounds like a good lead. I eagerly await your instruction
Click to expand...
Click to collapse
If download mode info shows secure bootloader enabled, the phone is, to all intents and purposes, now an AT&T phone. Attempting to flash T-Mobile firmware may likely result in a brick which would require a JTag fix. I was hoping download mode would show it still had a T-Mobile bootloader which could have allowed for safe firmware installation but this does not appear to be the case. Likely the motherboard was previously replaced or it suffered a brick and AT&T firmware was JTagged on. Either way, it would be safer to leave it as is.

Bummer. I'll leave it as is then. Thank you for all the help.

[Q] what is the stock firmware for USA t700

I was looking through Samfirmware.com and could not figure this out.
Where can I get the stock firmware file for the USA version of the T700?

Looking over the site and a few other posts for different devices, is this the right firmware for the model sold in the USA?
http://www.sammobile.com/firmwares/database/SM-T700/XAR/
The model number for my exact device is SM-T700NTSAXAR
The firmware list on samfirmware/sammobile says that it is cellular south.
None of the xar variants I have found (last three letters of the model number) seem to have cellular connection though.

Yea, never understood why they refer to it as Cellular South, but that is the correct region for us T700 users.

That is a bit confusing yeah.
Thank you for confirming that for me.
Want to make sure that I have the right stock software to flash back to if I want to unroot it.
Just got mine 3 days ago and probably going time be rooting it soon.
Don't think Knox really matters on this. Holding off for root on my s6 until can be rooted without tripping Knox so I don't lose Samsung pay.
Although on October everyone should be using chip and pin so it might be useless anyway.

Help with updating ATT branded Note4 on Tmobile.

I've got a friend who purchased an unlocked Note4 with ATT branding and software. She uses it on Tmobile. I noticed recently while googling that it looks like currently note4 on ATT is on marshmallow. However, when i try updating the phone it says its already up to date. The phone is currently on 5.1.1. Not sure why it's not updating. Could it be because it's on Tmobile as the carrier since its an ATT branded phone? How would I go about updating it?
android version 5.1.1
model SAMSUNG-SM-N910A
baseband N910AUCU2DOI2

unvaluablespace said:
I've got a friend who purchased an unlocked Note4 with ATT branding and software. She uses it on Tmobile. I noticed recently while googling that it looks like currently note4 on ATT is on marshmallow. However, when i try updating the phone it says its already up to date. The phone is currently on 5.1.1. Not sure why it's not updating. Could it be because it's on Tmobile as the carrier since its an ATT branded phone? How would I go about updating it?
android version 5.1.1
model SAMSUNG-SM-N910A
baseband N910AUCU2DOI2
Click to expand...
Click to collapse
I was in the same situation, and discovered an XDA thread that allowed me how to update my note4.
It's as simple as downloading the official at&t updates onto your sdcard and apply onto your phone.
It's a long thread, but well worth the read:
https://forum.xda-developers.com/no...t-server-link-installation-t3407308?nocache=1

DO12 missing?
mr_manny said:
I was in the same situation, and discovered an XDA thread that allowed me how to update my note4.
It's as simple as downloading the official at&t updates onto your sdcard and apply onto your phone.
It's a long thread, but well worth the read:
https://forum.xda-developers.com/no...t-server-link-installation-t3407308?nocache=1
Click to expand...
Click to collapse
I really appreciate the hint. i just recently got a new note4 (obvioulsy im not in the U.S) and cant get updates like you. Im very new to samsung (mod,flashed the shaiza out of my m8 and nexus 7, but this is new territory)
when i saw the link you shared it has the following
EPH5 to EPH7.
DOI9-to-EPH5
DOI7 to EPH5
DOI6-to-EPH5
i dont see DOI2.
can you please help me out with a few more hints as to what you did to get the latest update available... (i know about placing the files on sd and bootlader, select update etc)
but do i have to manually install every update to reach the last one?

ichiai said:
i dont see DOI2.
Do i have to manually install every update to reach the last one?
Click to expand...
Click to collapse
I guess you didn't make it to page 161
Start with page 161, then go back to the 1st page of the thread and download all updates/patches.
https://forum.xda-developers.com/no...stallation-t3407308/post69995836#post69995836
https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
I performed every step one-at-a-time.
Another option is to utilize ODIN (software) to jump steps, but it requires windows.
I don't do windows
Remove the back cover (so the phone doesn't overheat), and take your time...it will take a while

mr_manny said:
I guess you didn't make it to page 161
Start with page 161, then go back to the 1st page of the thread and download all updates/patches.
https://forum.xda-developers.com/no...stallation-t3407308/post69995836#post69995836
https://forum.xda-developers.com/no...hmellow-att-server-link-installation-t3407308
I performed every step one-at-a-time.
Another option is to utilize ODIN (software) to jump steps, but it requires windows.
I don't do windows
Remove the back cover (so the phone doesn't overheat), and take your time...it will take a while
Click to expand...
Click to collapse
you Godsend! thanks for confirming. will get back to reading -->
stay blessed

Another way to update AT&T devices on that aren't on AT&T is to get an AT&T SIM (99¢ on the AT&T GoPhone site), activate it on GoPhone but don't add any funds. The unfunded SIM won't let you make calls, send texts or use AT&T data but it will let you get OTA updates on WiFi.

Samsung Note10+ Not updating at all

Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps

NYKNick1015 said:
Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps
Click to expand...
Click to collapse
+1 for me. Ive spent almost 2 years and 3 phones trying to get an answer to this. My note 8 had this problem, then my note 10+, then the replacement note 10+. At&t blames Samsung, then Samsung blames at&t, over and over and over. I even had a Samsung technician sit in on a 3 way call with an at&t technician for the better part of an hour. The last I heard was that at&t was petitioning samsung to fix something on their end because at&t shows that everything is up to date on my phone but its not. Im looking into Odin too because this is getting stupid.

At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk

So I can use a verizon csc and it will work on a att branded phone? Or is a generic one better?
Edit
Basically which one do you pick. I'm leaning towards a tmobile because it sounds like the included bloatware is smaller.

I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk

butchieboy said:
I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
I actually went ahead and did this last night with the tmobile firmware and it was just as easy as you said. For whatever reason I didn't even get any bloatware. It booted up with the at&t logo and sound, and my software version says att/att/att. I put my sim card back in and there were no special notifications or anything, everything just worked. I wonder if Frija gave me the att firmware despite me putting in tmb? Either way, everything is up to day now. Thanks for the help!

Anytime my friend glad it all worked out[emoji106]
Sent from my SM-N975U using Tapatalk

US to EU Automatic Updates
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.

butchieboy said:
At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Hi I have the same problem. I flashed android 10 One UI 2.0 on my Exynos Note10+ SM-N975F last December via Odin and download the firmware from Samfrew(like Sammobile).(the firmware is the German version and I bought my phone from Egypt) Since then I didn't receive any security patch updates I only have the December 2019 one. Will it be safe if I download the latest firmware from Sammobile and flash it; the file in over 5GB , can this overwrite? I never tried to flash the same software two times. Is it safe?

As long as you are using the firmware that is for your device and your region you should be fine. Although this is Snapdragon thread I would think International flashing is same. You may want to double check in your device specific thread as I don't want to be the blame if there is something different with F version.
SM-N950U Extreme Syndicate Root
---------- Post added at 06:21 AM ---------- Previous post was at 06:11 AM ----------
Also try turning off auto update date and time. Set date like 5days ahead. Then check for update. Sometimes this little trick works for OTA
SM-N950U Extreme Syndicate Root

Robiko said:
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.
Click to expand...
Click to collapse
Yes,i have u1 version and i receive update regulary,now waiting for oneui 2.1 [emoji3]