ALL YOU NEED TO KNOW
No More Need To Go Anywhere
All Roms Including ROM Not Available on XDA
http://www.hackleaks.in/2014/01/all-about-micromax-canvas-4-a210.html
Help for Broken Links And Any Thing Missing
HACKLEAKS said:
ALL YOU NEED TO KNOW
No More Need To Go Anywhere
All Roms Including ROM Not Available on XDA
http://www.hackleaks.in/2014/01/all-about-micromax-canvas-4-a210.html
Help for Broken Links And Any Thing Missing
Click to expand...
Click to collapse
Can u make a back up using MTK Droid tool and upload it, trying to revive an almost dead Canvas 4
You can use the guide on the below link
http://www.gizmochina.com/2014/07/0...ackup-using-mtk-droid-tools-and-then-unbrick/
satsmagic said:
Can u make a back up using MTK Droid tool and upload it, trying to revive an almost dead Canvas 4
You can use the guide on the below link
http://www.gizmochina.com/2014/07/0...ackup-using-mtk-droid-tools-and-then-unbrick/
Click to expand...
Click to collapse
but sp tool will help dude
my own device is dead due to water
HACKLEAKS said:
but sp tool will help dude
my own device is dead due to water
Click to expand...
Click to collapse
SP tools is not helping, gets stuck at MTK preloader
satsmagic said:
SP tools is not helping, gets stuck at MTK preloader
Click to expand...
Click to collapse
Change desktop N cable N try because I was having same issue earlier tried on my other comp than it was successful
Related
HEY GUYZ I AM HERE TO UNBRICK YOUR LOVING TABLET :laugh:
:good:GIVE A THANKS IF I HELPED YOU:good:
SO WE R STARTING...................... PLEASE WAIT !!!
REQUEIRMENT : 1.PC/LAPTOP 2. USB CABLE OF P300 3.P300
DOWNLOAD THIS >>>> http://www.mediafire.com/?6ajhxangrha9b4s
EXTRACT IT ..NOW YOU WILL FIND Livesuitpack_version_1.07_**********
DOUBLE CLICK ON IT YES TO ALL [DONT CONNECT TAB]
NOW YOU WILL FIND ANOTHER LIVE SUIT
OPEN IT >> CLICK ON YES >> CLICK ON FORMAT>>CLICK ON NEXT>> CLICK ON YES>>
THEN CHOSE THIS IMAGE[ see atachment ]
THEN DON'T CLICK ON FINISH
CONNECT YOUR TAB TO PC PRESSING BACK BUTTON [ OFF ]
DON'T RELEASE
PC WILL POP UP INSTALLING DRIVERS [2 TIMES]
MANUALLY GIVE THE PATH OF DRIVER WHICH WAS In THE RAJIT
NOW PRESS AND RELEASE THE POWER BUTTON 5-7 TIMES
NOW 2 POP UP COMING FROM LIVE SUIT
CLICK 2 TIME YES
RELEASE THE BACK BUTTON
LIVE SUIT FLASHED IT
CONFIRMATION POP UP YES ON IT
DISCONNECT YOUR TAB
download the original firmware via torrent.. and seed please[UPTO 100KB/S SPEED]
PRESS THE THANKS BUTTON IF I HELPED YOU:good:
PLEASE DONT SPAM .. EMBEDED THIS PAGE TO YOUR BLOG OR WEB PAGE
c'mon this is of no use............ i thought its something new. But in reality its just about livesuit.
anyways thanks for the help!
yooray said:
c'mon this is of no use............ i thought its something new. But in reality its just about livesuit.
anyways thanks for the help!
Click to expand...
Click to collapse
thnks for support..... i think people are don interested about to unbrick with original stock rom of micromax... thats y m not uploading the img file
Unbrick P 275
Hii
I have a Infinity P275, it just hangs up at boot logo. Any suggestion?
Thanx for your valuable post.
singh.r said:
Hii
I have a Infinity P275, it just hangs up at boot logo. Any suggestion?
Thanx for your valuable post.
Click to expand...
Click to collapse
flash it
Link to stock rom
rajit said:
flash it
Click to expand...
Click to collapse
I have downloaded rajit.zipx, but I couldn't find stock image of 275. Can you provide some link?
singh.r said:
I have downloaded rajit.zipx, but I couldn't find stock image of 275. Can you provide some link?
Click to expand...
Click to collapse
This is not for p250
testing lewa on mmx a68 !!
More information about image
Can you provide more information about this firmware?
What is it's build number?
ykchavan said:
Can you provide more information about this firmware?
What is it's build number?
Click to expand...
Click to collapse
Don't have the tab so can't srry
Sent from my Micromax a68 using xda app-developers app
the torrent doesn't seem to be working; please provide a direct link.
Thanks in advance.
singh.r said:
Hii
I have a Infinity P275, it just hangs up at boot logo. Any suggestion?
Thanx for your valuable post.
Click to expand...
Click to collapse
http://forum.xda-developers.com/images/smilies/confused.gif
Just press the vol down and power buttons together or the options button or power button together(whichever works for your device) and then you will get to the recovery mode.
select Restore Factory Data from there and then after some time your tablet will start .http://forum.xda-developers.com/images/smilies/biggrin.gif
you might lose all your data and the files on the device.
I will not be responsible for any situation arising out of the steps written above .http://forum.xda-developers.com/images/smilies/eek.gif
http://forum.xda-developers.com/ima...rum.xda-developers.com/images/smilies/eek.gif
funbook p300 unbricked
Thank you very much for your solution to unbrick funbook p300.
I tried 7-8 times but succeeded in the end. as the drivers were not being installed.
one should be very carefull while using livesuit, cause if your device gets disconnected,
than u r in problem.
Help !! No cwm recovery installed
I bricked my funbook p300
i dont have cwm installed
so will this procedure work without the cwm recovery
ASTAREVENGER said:
I bricked my funbook p300
i dont have cwm installed
so will this procedure work without the cwm recovery
Click to expand...
Click to collapse
yes.. this is the official way of flashing. so no need to worry about cwm.. Just follow the steps
Closed per OP request
I read the tutorial about porting from same MTK processor to same MTK processor like 6589 to 6589
Desire 816G is a MTK 6582 and the android one phones , the micromax ,karbonn and spice are MTK 6582 phones too.
The android one series got CM 11
so i was thinking if it could be ported to the Desire 816G
demkohell said:
I read the tutorial about porting from same MTK processor to same MTK processor like 6589 to 6589
Desire 816G is a MTK 6582 and the android one phones , the micromax ,karbonn and spice are MTK 6582 phones too.
The android one series got CM 11
so i was thinking if it could be ported to the Desire 816G
Click to expand...
Click to collapse
did u tried it?
Yes
Yes ive ported it but i dont have a desire 816g now i gave it to my father and im scared to try it out cause there is no emergency reboot on that phone and you need to drain the battery to fix a bootloop , i have it built if you want to test say and ill upload but i wont test it myself
demkohell said:
Yes ive ported it but i dont have a desire 816g now i gave it to my father and im scared to try it out cause there is no emergency reboot on that phone and you need to drain the battery to fix a bootloop , i have it built if you want to test say and ill upload but i wont test it myself
Click to expand...
Click to collapse
can you please send me the link i'll try it....
First use this link and install cwm:
http://forum.xda-developers.com/desire-816/development/guide-desire-816g-recovery-cwm-t3007111
Then put the ROM zip on external SD and flash OK ?
I'll be uploading soon till then install cwm and remember that I am not responsible for any damage whatsoever!
demkohell said:
First use this link and install cwm:
http://forum.xda-developers.com/desire-816/development/guide-desire-816g-recovery-cwm-t3007111
Then put the ROM zip on external SD and flash OK ?
I'll be uploading soon till then install cwm and remember that I am not responsible for any damage whatsoever!
Click to expand...
Click to collapse
bro i already installed cwm(btw that was me who created cwm for 816G ).... so
upload it soon and also with installation guide...i m waiting
---------- Post added at 06:12 AM ---------- Previous post was at 05:59 AM ----------
demkohell said:
First use this link and install cwm:
http://forum.xda-developers.com/desire-816/development/guide-desire-816g-recovery-cwm-t3007111
Then put the ROM zip on external SD and flash OK ?
I'll be uploading soon till then install cwm and remember that I am not responsible for any damage whatsoever!
Click to expand...
Click to collapse
and bro if possible upload it on goodle drive......and you got fb or any other thing...so i can communicate with you easily
Desire 816g Cm11
demkohell said:
Yes ive ported it but i dont have a desire 816g now i gave it to my father and im scared to try it out cause there is no emergency reboot on that phone and you need to drain the battery to fix a bootloop , i have it built if you want to test say and ill upload but i wont test it myself
Click to expand...
Click to collapse
Can you send me the link . My email id : [email protected]
rockingindranil91 said:
Can you send me the link . My email id : [email protected]
Click to expand...
Click to collapse
if you get the link please send me too
my email id is: [email protected]
demkohell said:
I read the tutorial about porting from same MTK processor to same MTK processor like 6589 to 6589
Desire 816G is a MTK 6582 and the android one phones , the micromax ,karbonn and spice are MTK 6582 phones too.
The android one series got CM 11
so i was thinking if it could be ported to the Desire 816G
Click to expand...
Click to collapse
please could you send me the link too my email is :[email protected]
demkohell said:
First use this link and install cwm:
http://forum.xda-developers.com/desire-816/development/guide-desire-816g-recovery-cwm-t3007111
Then put the ROM zip on external SD and flash OK ?
I'll be uploading soon till then install cwm and remember that I am not responsible for any damage whatsoever!
Click to expand...
Click to collapse
Cynogenmod roms cannot be installed by cwm recovery.You will have to install other recovery like twrp.
Darshan50283 said:
Cynogenmod roms cannot be installed by cwm recovery.You will have to install other recovery like twrp.
Click to expand...
Click to collapse
Not true. I have installed many cyanogen roms on CWM..
the_Victorian said:
Not true. I have installed many cyanogen roms on CWM..
Click to expand...
Click to collapse
However I cannot install cynogen on 816(snapdragon 400) and micromax canvas hd(mediatek) via cwm.
demkohell said:
First use this link and install cwm:
http://forum.xda-developers.com/desire-816/development/guide-desire-816g-recovery-cwm-t3007111
Then put the ROM zip on external SD and flash OK ?
I'll be uploading soon till then install cwm and remember that I am not responsible for any damage whatsoever!
Click to expand...
Click to collapse
dude i'll flash it any how....just give me the link of ported rom
demkohell said:
Yes ive ported it but i dont have a desire 816g now i gave it to my father and im scared to try it out cause there is no emergency reboot on that phone and you need to drain the battery to fix a bootloop , i have it built if you want to test say and ill upload but i wont test it myself
Click to expand...
Click to collapse
You can power down device by the following key combination and the come back to the recovery mode selection screen if your device is in boot loop.
First, press all the 3 buttons i.e. Vol up + vol down + power. Then when the devices shuts down use the key combination of launching recovery mode i.e. Vol down + power immediately or else it goes back to boot screen.
---------- Post added at 00:25 ---------- Previous post was at 00:19 ----------
Kratos0_0 said:
dude i'll flash it any how....just give me the link of ported rom
Click to expand...
Click to collapse
If you want to flash a ROM in 816g mt6582 there is a MIUI 7 ROM available:
Link is given below:
http://forum.xda-developers.com/des...tc-desire-816g-dual-sim-t3285202/post64637143
---------- Post added at 00:52 ---------- Previous post was at 00:25 ----------
Kratos0_0 said:
bro i already installed cwm(btw that was me who created cwm for 816G ).... so
upload it soon and also with installation guide...i m waiting
Click to expand...
Click to collapse
Please fix the mounting of internal storage in the cwm for 816g. Would be really helpful.
Thanx
How to turn off HTC Desire 816g, without draining the battery, since vol+, vol- and power won't work on that device.
See here.
did the ROM work?? If yes, please send it to me too.... my email is [email protected]
I have buy p6 that after 2days i found that it has MTK chipset and the RAM its 1GB not 2.
And i can't update it to kitkat i have try dload way which doesn't work.
Is ther any body can help plz plz????
thnx a million
Because, you bought replica phone.
nazer_1370 said:
I have buy p6 that after 2days i found that it has MTK chipset and the RAM its 1GB not 2.
And i can't update it to kitkat i have try dload way which doesn't work.
Is ther any body can help plz plz????
thnx a million
Click to expand...
Click to collapse
You need to search for an update for mtk devices.
Sent from my SM-G850F
tileeq said:
You need to search for an update for mtk devices.
Sent from my SM-G850F
Click to expand...
Click to collapse
i have search about it,
i couldn't find the ROM that have MTK chipset for P6-U06.
there is no rom that can flash it from the SP Flashtools even the custom rom couldn't writ it
plz help me
can you tell me where i can rom 4 that device for SP Flashtools ?????
thnx
no one here can help us
heloooooooooooooo
plz help me
plz help me
plz help me
Im guessing that there is no mtk rom available out there.
Sent from my SM-G850F
Theres no rom
Hello guys I know you all have been waiting for "how to root the all new INFINIX NOTE 4 PRO X571"
Here's the good news "Team Hovatek" has successfully ported the philz recovery to our device.
Here's the step-by-step guide to achieve root
Prerequisites:
* PC
* usb cable
* Android usb vcom drivers,which you can get here https://www.hovatek.com/redirect.php?lin...t=download
* Philz recovery ported by Hovatek here https://hovatek.com/redirect.php?link=ht...Ztck0/view
* ADB ......*note* Download the Google platform tools ADB here @ https://forum.hovatek.com/thread-17104.html this ADB works best for our device.Then run this ADB like a normal app,then do this to open ADB command window " Hold down the SHIFT key on the keyboard,
* While holding SHIFT, right-click on an empty space in the ADB folder.
Now Follow the guide @ https://forum.hovatek.com/thread-19465.html to unlock your bootloader. but please only flash the philz recovery for INFINIX x571 ported for our device in the link above.
I brought all the necessary Tutorial/guide links and Download links here for easy access.So please take your time to follow these guides and in no distant time Your beautiful device will be rooted
mr vanderluv said:
Hello guys I know you all have been waiting for "how to root the all new INFINIX NOTE 4 PRO X571"/QUOTE]
Hmmm sir, sorry but this is Sony Xperia M Thread. if you want to post your work, please post it in your device page. OK
Click to expand...
Click to collapse
Nicklas Van Dam said:
mr
Hmmm sir said:
Oh sorry it was all a mistake,will get it deleted soon.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
mr vanderluv said:
Oh sorry it was all a mistake,will get it deleted soon.
Click to expand...
Click to collapse
No problem, anyway well done for your great work :laugh:
Sent from my nicki using XDA Labs
Guys inifix note 4........custom rom is available or not??....
Bro can u port custom rom emui for infinix note 4 x572 or can we flash this recovery on my device (x572)?.....plzz tell me.....advance thanks
Please hmmmm, guys. This is Sony Xperia M Forum Thread, I know OP is missplaced to post in here.
But please understand this is on not your device forum, so please try to find your device thread or make a new thread on global discussion.
Thanks for your response
Sent from my nicki using XDA Labs
please lineage os 14.1 for infinix note 4 pro x571
Hi,
Does anyone have Chinese Reno 6 PEQM00 firmware
did you find chinese stock rom? can you share it if do
mamomia said:
did you find chinese stock rom? can you share it if do
Click to expand...
Click to collapse
Nope. Still not got Chinese Stock rom
i flashed my oppo to global version, everything is working fine but baseband is null.
is there any help anything regarding that on how to fix that atleast.
phone is not even going in Preloader VCom mode. it just turned on when i connect it to computer with cable.
dont know what to do now
mamomia said:
i flashed my oppo to global version, everything is working fine but baseband is null.
is there any help anything regarding that on how to fix that atleast.
Click to expand...
Click to collapse
How did you flashed. If flashed using sp tool, untick opporeserve2,
cdt_engineering &
md1mg.
And Tell me worked or not
The Gj said:
How did you flashed. If flashed using sp tool, untick opporeserve2,
cdt_engineering &
md1mg.
And Tell me worked or not
Click to expand...
Click to collapse
I flashed it using mtk client from github. I followed a tutorial from xda this one
Flash stock ROM or downgrade ColorOS 12 on OPPO Reno6 5g(CPH2251-MT6877 chip) by using free MTK client GitHub tool.
Hey Guys, After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not...
forum.xda-developers.com
If you are still on chinese rom can you take full backup using this tutorial
https://forum.xda-developers.com/t/...sing-mtk-client-oppo-reno6-5g-mt6877.4406069/
And share that backup with me it would help me.
I unknowingly deleted my backup otherwise i would have used that to restore baseband for GSM module to work. Now im on baseband unknown and imei null.
mamomia said:
I flashed it using mtk client from github. I followed a tutorial from xda this one
Flash stock ROM or downgrade ColorOS 12 on OPPO Reno6 5g(CPH2251-MT6877 chip) by using free MTK client GitHub tool.
Hey Guys, After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not...
forum.xda-developers.com
If you are still on chinese rom can you take full backup using this tutorial
https://forum.xda-developers.com/t/...sing-mtk-client-oppo-reno6-5g-mt6877.4406069/
And share that backup with me it would help me.
I unknowingly deleted my backup otherwise i would have used that to restore baseband for GSM module to work. Now im on baseband unknown and imei null.
Click to expand...
Click to collapse
Remove those 3 files from your rom folder and try flashing using mtk client.
And I am not a Chinese user. (Global)
The Gj said:
Remove those 3 files from your rom folder and try flashing using mtk client.
And I am not a Chinese user. (Global)
Click to expand...
Click to collapse
Even though i flashed with all files first time?
I dnt even have the chinese stock rom now meaning its origional files.
If i flashed without those 3 files it will use previously flashed files which are of global model.
But i will try what you said and will see if it works and get back to you.
There is 1 thing i did find on chinese official site of oppo there are chinese rom available in ColorOS section but only of older models before Reno 4 i thnk.
Yeah
The Gj said:
Yeah
Click to expand...
Click to collapse
I removed those 3 files and now phone is not even turning on.
finally was able to reinstall coloros12(CPH2251) rom using mtk client github.
phone turned on now but still baseband unknown.
mamomia said:
finally was able to reinstall coloros12(CPH2251) rom using mtk client github.
phone turned on now but still baseband unknown.
Click to expand...
Click to collapse
Hey in my pc , mtkclient showing lib-30m error, could you please share drivers and mtkclient files
The Gj said:
Hey in my pc , mtkclient showing lib-30m error, could you please share drivers and mtkclient files
Click to expand...
Click to collapse
Sure I will share tonight its on my other laptop which i dnt have on me right now.
Did u run install script after downloading from github? mtkclient
mamomia said:
Sure I will share tonight its on my other laptop which i dnt have on me right now.
Did u run install script after downloading from github? mtkclient
Click to expand...
Click to collapse
What script. I don't know
The Gj said:
What script. I don't know
Click to expand...
Click to collapse
Read the readme file on github repo its stated there
The Gj said:
What script. I don't know
Click to expand...
Click to collapse
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
mamomia said:
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
Click to expand...
Click to collapse
Any drivers required or not
mamomia said:
https://github.com/bkerler/mtkclient
This is mtk client github link download from here and after download make u have python installed and in cmd run the commands mentioned in install section here.
After that its ready to flash or do anythng
Click to expand...
Click to collapse
You are on which version of coloros