'OpenVPN for Android' working on non-rooted Fire TV - Fire TV Q&A, Help & Troubleshooting

Over the last week I've been trying to get OpenVPN Installer and then OpenVPN Settings to work on my rooted Fire TV 2 (on 5.0.5_r4). I've described the steps here : http://forum.xda-developers.com/fire-tv/help/vpn-rooted-fire-tv-t3370488
Even though the VPN turns on, it appears the Fire TV 2 internet traffic is still routed through the original pathway and the IP address remains unchanged, which I've been unable to fix. Has anyone managed to get OpenVPN Settings to work on a rooted Fire TV?
However, I recently noticed OpenVPN for Android (https://plus.google.com/communities/114121831091105660092) and gave this a try on my Fire TV 2 and it worked straight out of the box (giving an updated IP address when checked). I presumed that it only worked because my Fire TV 2 was rooted with the necessary VPN binaries installed (by OpenVPN Installer). However, the author of OpenVPN for Android communicated to me that root is not needed and, as a test, I've just tried it on my unrooted Fire TV 1 (on 5.0.5) and it also works!
Will be interesting to see if others have had similar success and can confirm findings.

I gave this a go ( OpenVPN for Android ) on my rooted firetv 1,
and sure enough it works

Does anyone know if this gives accesss to different content with a German Prime membership, e.g. when routed to an US VPN-Endpoint? Or does it just stop working?

What do you need to do to install this on an unrooted Fire Stick? My only guys is to install it on my phone, grab the apk and adb it to my stick. Any better suggestion?
Sent from my VS985 4G using XDA Labs

Bramton1 said:
What do you need to do to install this on an unrooted Fire Stick? My only guys is to install it on my phone, grab the apk and adb it to my stick. Any better suggestion?
Sent from my VS985 4G using XDA Labs
Click to expand...
Click to collapse
Thats what I did but you can install it straight from phone

Petesky said:
Thats what I did but you can install it straight from phone
Click to expand...
Click to collapse
Yeah, I installed AGK Fire onto my phone last night. It seems that's probably the best way to get that app on the stick.

guys can someone help me?
My device: fire tv 2 (rooted with firmware 5.04)
i have install the files apks (openvpninstaller+openvpnsettings+busybox)
i can see in open vpn setings under prequisites it says successful
i can see 4 green lights with successful
i have download my openvpn config files from hidemyass.com
and copy the files to my sdcard.
when i open vpnsetting i have turn first open vpn tick it on
i can see the hidemyass open vpn files under vpn configruatiuons
but can not choose it (tick on dont work)
why i can not choose my config file from open vpn settings menu?

dean4k said:
guys can someone help me?
My device: fire tv 2 (rooted with firmware 5.04)
i have install the files apks (openvpninstaller+openvpnsettings+busybox)
i can see in open vpn setings under prequisites it says successful
i can see 4 green lights with successful
i have download my openvpn config files from hidemyass.com
and copy the files to my sdcard.
when i open vpnsetting i have turn first open vpn tick it on
i can see the hidemyass open vpn files under vpn configruatiuons
but can not choose it (tick on dont work)
why i can not choose my config file from open vpn settings menu?
Click to expand...
Click to collapse
Just use the app in the op

dean4k, like Petesky says, just use 'OpenVPN for Android' found in the link in the first post - it works great and the latest version is much easier to use with just the Fire TV remote (no need of a mouse pointer) once setup!
Bramtom1 you may have already seen this useful page (on AFTVnews) but I found it a great help for learning how to connect/load stuff onto Fire TV:
http://www.aftvnews.com/sideload/

Add Proxy only for Prime
Guys I live in Argentina and can change the DNS setting on my stick to receive USA prime but doing so breaks my Netflix, also have Kodi installed and that works fine with US Dns or local. Is there any way to add some code to only Proxy prime through the US DNS server.
I tried installing DNS changer app but it does not change the Firestick settings although it says changed, my stick is also rooted.
Thanks not sure what thread to post on.

null

What VPN Service works?
For those of you that got this working, what VPN service are you using? I am trying with Private Internet Access, and the app shows connected, but when I check, I see my original IP. Thanks.

Hi Mav21,
I'm using IronSocket VPN, which works fine.

Mav21 said:
For those of you that got this working, what VPN service are you using? I am trying with Private Internet Access, and the app shows connected, but when I check, I see my original IP. Thanks.
Click to expand...
Click to collapse
Not using it just now but I was using PIA as well and it does show original ip but if you use another app to check it will show that your ip has changed

Thanks, when I check on the PIA website, it returns my original IP address and says "not protected". Any other settings that I need to look at?
Petesky said:
Not using it just now but I was using PIA as well and it does show original ip but if you use another app to check it will show that your ip has changed
Click to expand...
Click to collapse

Mav21 said:
Thanks, when I check on the PIA website, it returns my original IP address and says "not protected". Any other settings that I need to look at?
Click to expand...
Click to collapse
Ever figure this out with PIA? I only see my original IP despite installing "OpenVPN for Android" and it connecting. I also have the OpenVPN binary installed manually (I'm rooted).

People need to be very wary about this. If the PIA site sees your source IP address, you are NOT protected.
I'm seeing the same issue as others, both the PIA site and any other site the returns IP addresses shows the source IP in both Firefox and Chrome.
OpenVPN appears to connect, but traffic is not being routed through it.

May it be possibile that this only works with the fire tv and not with the fire tv stick?
Has anyone of you managed to use OpenVPN on a non-rooted fire tv stick?
I tried and my stick is connected to my VPN, but the traffic is unfortunately not routed through the tunnel

I can't get it to work. Using Iron Socket and i get the error "tls-auth enabled, but no valid --auth alogorith specified". Not sure why. Fire TV 1 running 5.2.1

No luck for me either.
I have a Firestick. I sideloaded the latest OpenVPN for Android.
Imported the profiles from EZ Explorer.
After entering password/user, it attempts connecting and I See the following errors:
Code:
Failed to open the tun interface
Error: Cannot find de.blinkt.openvpn.core.OpenVPNService
ERROR: Cannot open TUN
Exiting due to fatal error
Process exited with exit value 1
MGMT: Got unrecognized command>FATAL:ERROR: Cannot Open Tun
Not entirely sure what this means. Anyone?

Related

Fire TV Side Loader APP [Android]-[Version 1.5.15][Now Supporting Marshmallow ]

The app should now work on most Marshmallow devices. Please report any issues with your device name and android version?
New tab for browsing fire TV/ Stick SDcard to pull/delete files.
Now you can play any http video on FireTV/Stick by selecting AGK fire as option..(Need MX Player installed on the Fire TV/Stick)
Auto Find FireTV/Stick. You still can add custom IP address.
Two new tabs. Has an Expert mode/Basic mode. Can be changed from settings.
You can Lunch/Uninstall apps on FireTV/Stick in expert mode.
I need to updated the help file. Please give me some time, I will update it.
New version added with ability to push files/folders to FireTV/Stick. Let me know what works and what doesn't.
Finally got it back on Google Play as paid version
https://play.google.com/store/apps/details?id=com.googletv.sideloader
Added a new version. In this new version You can export apps for sharing.
Now a Paid ad free version(if you want to support) @
http://www.amazon.com/Gopi-Adusumil...=UTF8&qid=1420754153&sr=1-2&keywords=agk+fire
Just added an ads support version. No new features. Just still working on few issues. Don't download this, if you hate ads. If you want to support me, please download this. I will try to post new version with with multi IP support and Auto IP discovery soon.
The App is now avilable on Amazon app store too.
http://www.amazon.com/Gopi-Adusumil...d=1418414099&sr=1-1-catcorr&keywords=agk+fire
Anyone having issues on moto phones, Can you please, try the attached moto version.
I have created this little android app for my own use. The main purpose of this app is to install any app that is on you android phone/tablet to FireTV/stick. All you need is the adb turned on your FireTV/Stick and Allow installing apps from unknown sources.
Here are steps copied from Amazon
Turn on ADB Debugging
You must enable ADB on the Fire TV device before you can connect to the device.
From the main (Launcher) screen, select Settings.
Select System > Developer Options.
Select ADB Debugging.
Get the IP Address
You need the IP address of your Fire TV device on your network to connect ADB to it.
From the main (Launcher) screen, select Settings.
Select System > About > Network. Make note of the IP address listed on this screen.
Now Just open the AGK fire app attached below, enter you FireTV/Stick IP Address and select the app you want to install on your FireTV/Stick.
Credits goes to alexjlockwood for "https://github.com/alexjlockwood/AppListLoader" which is the backbone for my app.
Also Thanks to all the wonderful tutorials on android app development on the web.
Any Suggestions are welcome. I will try to address as soon as I can.
I don't know how many people tried this app and felt it to be useful, but I am posting a new Version of this app. One small request if you use the app, please post a comment , any comment greatly appreciated.
Changes in version 1.1:
Added new menu option when you can select an apk file to install to your firetv. (Thanks to jfmdev for https://code.google.com/p/afiledialog/wiki/UserGuide)
Changes in version 1.2:
Aimed at using the app on FireTV/Stick (Thanks to AFTVNews.com for valuable suggestions and promoting my app)
Added an option to lunch apps or install when you select an app.
Still troubleshooting the problems some users are reporting. Will fix them ASAP.
Changes in version 1.3:
Made changes to adb install as per AFTVNews.com suggestion.(Hoping it will fix all the problems that some users are having. Please let me know it is still not working).
Changes in version 1.4:
Ability to push files/folders to Fire TV/Stick
Ability see all apk files
Export/Share apks.
Changes in version 1.5.11
Auto Find FireTV/Stick. You still can add custom IP address.
Two new tabs. Has a expert mode/basic mode. Can be selected from settings.
You Can lunch/Uninstall apps on FireTV/Stick in expert mode.
Changes in version 1.5.12
New tab for browsing Fire TV/ Stick SDcard to pull/delete files.
Now you can play any http video on FireTV/Stick by selecting AGK fire as option.(Need MX Player installed on the Fire TV/Stick)
Changes in version 1.5.15
The app should now work on Marshmallow devices
Tried it and its awesome!!!
Imagination is your limit.I have installed Chrome Beta, Xfinity TV (which covers lot of subscribed live channels like ESPN, ESPN2, CNN ( YOU NEED TO HAVE SUBSCRIPTION) etc), TWMC (XBMC for Android) and all of them works well. Great Job!!!!
Thanks for this. I will try this when I get home.
Android TV
Will this work for Android TV devices as well?
andyosier said:
Will this work for Android TV devices as well?
Click to expand...
Click to collapse
It should work. I haven't tested any. I have fire stick only. Any device that has adb over network turned on should work.
I'll try it tonight and let you know. I have an ADT-1 Developer Kit.
I think ADT-1 uses port 4321 so when you set your ipaddress add :4321 to the end of it. Thanks for testing.
Looks great. Super simple. Saves a bunch of time, thank you
Can't get it working
I have enabled adb and install of unknown apps, but no apps are installing to My Fire TV. When I select an app to install, I see a window pop up very briefly that says "Installing app", but then nothing.
It's awesome
adusumilli said:
I have created this little android app for my own use. The main purpose of this app is to install any app that is on you android phone/tablet to FireTV/stick. All you need is the adb turned on your FireTV/Stick and Allow installing apps from unknown sources.
Here are steps copied from Amazon
Turn on ADB Debugging
You must enable ADB on the Fire TV device before you can connect to the device.
From the main (Launcher) screen, select Settings.
Select System > Developer Options.
Select ADB Debugging.
Get the IP Address
You need the IP address of your Fire TV device on your network to connect ADB to it.
From the main (Launcher) screen, select Settings.
Select System > About > Network. Make note of the IP address listed on this screen.
Now Just open the AGK fire app attached below, enter you FireTV/Stick IP Address and select the app you want to install on your FireTV/Stick.
Credits goes to alexjlockwood for "https://github.com/alexjlockwood/AppListLoader" which is the backbone for my app.
Also Thanks to all the wonderful tutorials on android app development on the web.
Any Suggestions are welcome. I will try to address as soon as I can.
I don't know how many people tried this app and felt it to be useful, but I am posting a new Version of this app. One small request if you use the app, please post a comment , any comment greatly appreciated.
Changes since last version:
Added new menu option when you can select an apk file to install to your firetv. (Thanks to jfmdev for https://code.google.com/p/afiledialog/wiki/UserGuide)
Click to expand...
Click to collapse
It's awesome. It works fine.
geezman said:
I have enabled adb and install of unknown apps, but no apps are installing to My Fire TV. When I select an app to install, I see a window pop up very briefly that says "Installing app", but then nothing.
Click to expand...
Click to collapse
I get exactly the same behavior. Doesn't work.
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
ddubz said:
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
Click to expand...
Click to collapse
Hmm, doesn't work on my 2013 Moto X also. :crying:
Amazing app! Thank you!
Sent from my HTC6525LVW using XDA Free mobile app
Thank you! This worked flawlessly (version 1.1) on FireStick. Much faster than upload/download from Dropbox.
I haven't tried the direct apk, only apps installed on my phone (oneplus one).
edit: Had a moment where it would toast "installing", but then fade and do nothing. Killed app and restarted FireStick, and worked again. Not sure which of those two actions fixed it.
I have a few suggestions:
1. Go into your XDA settings and enable the donation button. You deserve compensation for your efforts. This is a great app.
2. When the app executes any adb command, like "adb install ....", you should target the IP address specifically. Some Android devices, including the Fire TV, will already be connected to an emulated adb device if developer mode is turned on. So when the app connects to the Fire TV, your adb commands will fail because there are two connected devices. I think this is the source of many peoples issues. You can direct adb commands like this:
Code:
adb -s <ipaddress:5555> ...
Note that the port number is required for this to work.
3. The app can be used on a Fire TV to install Fire TV only apps onto a Fire TV Stick. However, navigating with the remote is a bit broken. When the app list initially loads, make it so that the first item is selected/highlighted by default. This will allow the Fire TV remote to move the selection down the list. I found a workaround that allows this to work for now. If you press the menu button on the Fire TV remote and go to the apps settings, when you return to the app list, the selector will be present.
AFTVnews.com said:
I have a few suggestions:
1. Go into your XDA settings and enable the donation button. You deserve compensation for your efforts. This is a great app.
2. When the app executes any adb command, like "adb install ....", you should target the IP address specifically. Some Android devices, including the Fire TV, will already be connected to an emulated adb device if developer mode is turned on. So when the app connects to the Fire TV, your adb commands will fail because there are two connected devices. I think this is the source of many peoples issues. You can direct adb commands like this:
Code:
adb -s <ipaddress:5555> ...
Note that the port number is required for this to work.
3. The app can be used on a Fire TV to install Fire TV only apps onto a Fire TV Stick. However, navigating with the remote is a bit broken. When the app list initially loads, make it so that the first item is selected/highlighted by default. This will allow the Fire TV remote to move the selection down the list. I found a workaround that allows this to work for now. If you press the menu button on the Fire TV remote and go to the apps settings, when you return to the app list, the selector will be present.
Click to expand...
Click to collapse
Thanks for the help. I will try to add all the suggestions in the next release.
ddubz said:
This didn't work for me on my moto x 2014 but worked great on my galaxy tab 4 10.1 thanks
Click to expand...
Click to collapse
Can you please check if you can start adb on your phone from terminal app. It would be a great help.
Really need to support upcoming developers... Donated... You can buy a pack of beer.
adusumilli said:
I think ADT-1 uses port 4321 so when you set your ipaddress add :4321 to the end of it. Thanks for testing.
Click to expand...
Click to collapse
Aha! I will try that. I had no idea about the port.
BTW, your app looks much nicer than the Fireinstaller app that is available on Google Play. Maybe you should make it available there. Make it work for both Fire TV and Android TV. Call it "Sidestaller TV".
---------- Post added at 10:24 AM ---------- Previous post was at 10:13 AM ----------
Dude! Your app has been posted on AFTVnews!
aftvnews.com/agk-fire-app-lets-you-transfer-apps-from-an-android-device-to-an-amazon-fire-tv-or-fire-tv-stick
(Cut an paste the URL, I don't have enough posts to post links outside XDA, apparently.)

[Q] british amazon fire ?

ive ordered an amazon fire tv in England , and now someone tells me ii may not be able to root it to put xbmc on it and then install a vpn on it , is this true or not and how can i tell ? also if this box wont do this , can you recommen a device that will work as i need to install a vpn directly onto the device so only the device uses the vpn , i also have a virgin media superhub ? thanks
davemaden said:
ive ordered an amazon fire tv in England , and now someone tells me ii may not be able to root it to put xbmc on it and then install a vpn on it , is this true or not and how can i tell ? also if this box wont do this , can you recommen a device that will work as i need to install a vpn directly onto the device so only the device uses the vpn , i also have a virgin media superhub ? thanks
Click to expand...
Click to collapse
I don't think UK firetv's can be rooted unless you do it using the hardware method.
You can install xbmc on it.
if not rooted you cannot install vpn.
suggestion, try to get a rooted firetv from the us
what box would do what i require in the uk ? as i dont fancy the hardware method . thanks
davemaden said:
what box would do what i require in the uk ? as i dont fancy the hardware method . thanks
Click to expand...
Click to collapse
Look on ebay. As far as I know anyone in the west coast like Los Angeles are still getting the old firmware. If you have a friend here, send the box to him and have him root it for you. the guides written by rbox and others are perfect.
If you are looking just for xbmc then there is no need to root.
i will need it rooted because i need a vpn installed , as virgin media (my isp) are blocking 1 channel and now icefilms , and i need a device that that i can install the vpn directly onto because the superhub router isnt compatable with any vpn . i dont know anyone in the usa , thanks
davemaden said:
i will need it rooted because i need a vpn installed , as virgin media (my isp) are blocking 1 channel and now icefilms , and i need a device that that i can install the vpn directly onto because the superhub router isnt compatable with any vpn . i dont know anyone in the usa , thanks
Click to expand...
Click to collapse
You can use unotelly. you won't need vpn and you'll have access to your content. I am leaving on Vacation in about a week or else I wouldn't mind helping out.
if i bought a new amazon fire tv from the states , would i be able to root that easily or is it not possible to root the new devices ? thanks
davemaden said:
if i bought a new amazon fire tv from the states , would i be able to root that easily or is it not possible to root the new devices ? thanks
Click to expand...
Click to collapse
It depends, did you buy new or refurb. did you buy it from ebay or amazon. Which location. The best way to find out is to boot it up normally and go to system and check the firmware and disconnect the firetv and if confused. ask here.
i bought a new one from amazon uk , its still in the box and i will return it , as i have been told that new ones cant be rooted , is it the same if i bought one off amazon in the usa . ? or could that be rooted ? do you know which software versions can be rooted and which cant , just incase the one i have has older software ? ive looked at the site you said instead of using vpn , it looks interesting , thanks for your help , enjoy your vacation
The ones Staples has are packing the old firmware, but you will still have trouble registering the device from where you are. As the other person mentioned you will need someone here in the states to set it up for you.
Or you could just buy a router that supports vpn. Ones that can run DD-WRT or similar custom firmware can usually be got for half the price of the FTV box.
hi i have bought one off e-bay from the USA , its been rooted and has xbmc loaded on it . Will i be able to install a vpn onto it seeing as its been rooted and has anyone a tutorial on how i can do this ? thanks
davemaden said:
hi i have bought one off e-bay from the USA , its been rooted and has xbmc loaded on it . Will i be able to install a vpn onto it seeing as its been rooted and has anyone a tutorial on how i can do this ? thanks
Click to expand...
Click to collapse
It will depend what the Rooter did.. Seems a lot of the ones being sold on eBay already rooted do not come with CWM or a PreRooted FW. But you should be able to upgrade to that once you backup the XBMC & other things. Then you can take stock of what has been done to the Rooted FTV. And upgrade things from there.
are there any tutorials about that would show me how to do this ? thanks
davemaden said:
are there any tutorials about that would show me how to do this ? thanks
Click to expand...
Click to collapse
First you would need to establish where your FTV is at. Then you can make a plan for what is left to upgrade/update.
I myself use the Amazon FireTV Utility App v0.34. And I have written a few walkthru posts. I use this Utility so I don't have to input everything manually. Really shortens the time it takes to mod things.
But I still base everything I do from the many guides over @ http://www.aftvnews.com/
All the guides can be found here: http://www.aftvnews.com/tag/guide/
And the best starting point is found here: http://www.aftvnews.com/start/
You would just skip the parts that have already been done to your FTV.
Did you already order one ?? If you already order one then just familiarize yourself with the guides. And options & the Utility. And the once you receive it then you can start to form a plan... Let me know when you get it. I can try to help... PM me if needed.
thanks for that i will have a read of those links , i have already bought it and its on its way , ive asked the seller about the CWM or a PreRooted FW. but he didnt know what it was , he said its pre loaded with xbmc and ready to plug in and watch , its also been rooted . is there a guide for installing a vpn ? because if it comes with xbmc installed and is rooted , i may only have to install the vpn . thanks for your help
the ftv has arrived and has been rooted using the ADB method , so it shouldnt update when i plug it in , ( my router wont allow me to block domain names , so i cant block the amazon updating links ) . i am going to try to install hide my ass vpn directly onto the ftv and im using the instructions from this link **tps://vpntips.com/fire-tv-vpn-install/ , should i be able to skip the instructions until the downloading of the 2 apps for the openvpn installer ? and just one more thing in the instructions that im not sure about is the op 2 in sideloading of apps " change directory (CD) to your android SDK platform tools directory " ? im not sure what this means or how to do it , could someone explain ? thanks for your help .
davemaden said:
the ftv has arrived and has been rooted using the ADB method , so it shouldnt update when i plug it in , ( my router wont allow me to block domain names , so i cant block the amazon updating links ) . i am going to try to install hide my ass vpn directly onto the ftv and im using the instructions from this link **tps://vpntips.com/fire-tv-vpn-install/ , should i be able to skip the instructions until the downloading of the 2 apps for the openvpn installer ? and just one more thing in the instructions that im not sure about is the op 2 in sideloading of apps " change directory (CD) to your android SDK platform tools directory " ? im not sure what this means or how to do it , could someone explain ? thanks for your help .
Click to expand...
Click to collapse
No, just because you are rooted does not mean that you won't get OTA updates. You need to disable the package that checks for updates. Before anything else, this should be the first order of business, else you can loose root.
Regarding OpenVPN, yes. You install 3 things:
1. tun.ko
2. OpenVPN installer.
3. OpenVPN settings.
Make sure BusyBox is installed as well (not just installed, but you need to open the app and install the binaries within it).
As someone mentioned about using a DNS re-director service, you should check that out. VPN might be an over-kill for your needs. And if you do decide to go the VPN route, the best option is to get a cheap router on which you can install DD-WRT or OPENWRT (check those sites before you buy a router and make sure it is supported). You can run DD-WRT as a VPN client and you can connect your FTV to this router (set up as a VPN client to your commercial VPN provider) and only funnel FTV traffic over this VPN. You can put this router down-stream from your main router. Check to see if your VPN provider offers PPTP as well (less secure, but maybe faster). PPTP is not available natively on FTV, so you will need to use a secondary device to route your traffic.
What the "change directory" is talking about is that your command prompt needs to be in the folder where adb is installed. Usually, in the "platform-tools" folder. In this folder, you will put your apk files that you need to install to your FTV (you can put these apk files somewhere else, but for sake of sanity, put them there).
It will be very helpful to you if you go to www.aftvnews.com and read the guide on adb installs.
HI thanks for that , i will have a read . i dont think ftv will update when i plug it in as im told updates have been stopped using the ADB method when it was routed , my router wont let me block updates , . im looking into getting a second router (Asus RT-N66U) that i can install downstream from the original router that has been supplied by my isp , and i can switch my original to modem mode . im just hoping ftv doesnt update when plugged in ? should it be ok , knowing what ive put on here ? thanks
hi , ive plugged ftv in and its been on for a few hours and doesnt seem to be updating software version is 51.1.1.0user511070220 . ive taken on board what was said about dns as opposed to vpn , as i only want the access to blocked sites in xbmc on the ftv , and have found a tutorial from smartdns , would this work without loosing my root or getting updates , instructions are below . Also how do i set up a 1 click USA address in amazon account ( i have an account but am in the UK ) and where it says go to account and set to USA , is this done on my amazon acount or in the fire tv ? sorry to sound thick . thanks
-- Change The DNS On Your Fire TV
1. Go to settings
2. Select Systems
3. Select WI-FI
4. Select your WI-FI network and forget WI-FI network by Pressing the button with 3 lines on it.
5. Press the select button.
6. Select your WI-FI network.
7. Enter your WI-FI password and Click on advanced
8. Enter the first three groups of numbers exactly the same as the IP address of your router. As an example, if your router IP is 192.168.0.1, then use the IP address 192.168.0.70.
9. For the Default gateway enter the IP of your router
10. Input 24 for the Network Prefix Length and Click Next
Enter 54.183.15.10 for DNS 1
Enter 54.255.130.140 for DNS 2
Now you are all set!
Make sure you have a 1-click US address in your Amazon Account. Also on Amazon.com go to Your Account > Manage Your Content and Devices > Country Settings and set country to United States
davemaden said:
hi , ive plugged ftv in and its been on for a few hours and doesnt seem to be updating software version is 51.1.1.0user511070220 . ive taken on board what was said about dns as opposed to vpn , as i only want the access to blocked sites in xbmc on the ftv , and have found a tutorial from smartdns , would this work without loosing my root or getting updates , instructions are below . Also how do i set up a 1 click USA address in amazon account ( i have an account but am in the UK ) and where it says go to account and set to USA , is this done on my amazon acount or in the fire tv ? sorry to sound thick . thanks
-- Change The DNS On Your Fire TV
1. Go to settings
2. Select Systems
3. Select WI-FI
4. Select your WI-FI network and forget WI-FI network by Pressing the button with 3 lines on it.
5. Press the select button.
6. Select your WI-FI network.
7. Enter your WI-FI password and Click on advanced
8. Enter the first three groups of numbers exactly the same as the IP address of your router. As an example, if your router IP is 192.168.0.1, then use the IP address 192.168.0.70.
9. For the Default gateway enter the IP of your router
10. Input 24 for the Network Prefix Length and Click Next
Enter 54.183.15.10 for DNS 1
Enter 54.255.130.140 for DNS 2
Now you are all set!
Make sure you have a 1-click US address in your Amazon Account. Also on Amazon.com go to Your Account > Manage Your Content and Devices > Country Settings and set country to United States
Click to expand...
Click to collapse
You will only loose root if you install a stock recovery or stock firmware. If you do a Factory Reset you will need to reblock the OTA updates..
As for the other ?'s you have about Amazon Accounts country changes & DNS. www.aftvnews.com Has the guides for all that if you look in their guide section...

VPN on Fire stick 5.2.1

Hello,
I have been trying to get PIA VPN service running on amazon fire stick version 5.2.1. I can connect to the PIA vpn but my IP does not change.
Web search indicated I needed root which I have done via ADBLINK install of Kingoroot but still does not work. Same results; I can connect to the PIA vpn but my IP does not change.
I have tried with openvpn 0.6.55 apk and PIA 1.2.2 apk.
Do I need to grant root permission to the openvpn app? If so how (noob here)? And/or do I need some helper apk/app?
Any help is appreciated.
IB
did you have any luck with this?
No
TMonte87 said:
did you have any luck with this?
Click to expand...
Click to collapse
No, any help would be appreciated.

How can I get OpenVPN working with Kodi & Do I need to root my Amazon Fire TV Stick?

How can I get OpenVPN working with Kodi & Do I need to root my Amazon Fire TV Stick?
Hi,
Currently I've done a really weird hacky way of getting my VPN working...
1. Installed NordVPN via Apps2Fire
2. Installed KodiOnBoot via Apps2Fire
3. Setup NordVPN to Boot on Launch
4. Setup KodiOnBoot to Launch Kodi after 120 Seconds of Screen Timeout (Alternatively I can just press Home & Load Kodi manually)
NordVPN was a nussiance to get it to where I've managed to get it to so far because you can't scroll down in the settings correctly. Likewise the same problem with OpenVPN's application, I can't scroll down so I can't even get that app to boot...
However in Kodi there is an OpenVPN app you can download via https://brianhornsby.com/kodi_addons/openvpn however when trying to setup that it just tells me to Check the Log because it failed to connect to the .opvn file yet I can't find the log and I have a feeling its to do with root/su.
Any ideas what I should do to get around this?
Thanks

Problems with my Fire Tv Stick with Alexa

Hi everybody!
Hi got a brand new fire tv stick with Alexa and when powering it on i'm able to select the language and to connect it with wifi but then i get an error when it check new updates. I'm able to enter the setup menu through the fire tv app on my smartphone but i can't enable adb to skip ota (i read some thread here). I see that there are no apps and i can't login with amazon account. I live in a country where it isn't still released and so amazon support said that they can't help me... I just want to connect the fire tv to internet to use some basical app like spotify or youtube... can someone help me please?
Calciovita said:
Hi everybody!
Hi got a brand new fire tv stick with Alexa and when powering it on i'm able to select the language and to connect it with wifi but then i get an error when it check new updates. I'm able to enter the setup menu through the fire tv app on my smartphone but i can't enable adb to skip ota (i read some thread here). I see that there are no apps and i can't login with amazon account. I live in a country where it isn't still released and so amazon support said that they can't help me... I just want to connect the fire tv to internet to use some basical app like spotify or youtube... can someone help me please?
Click to expand...
Click to collapse
I don't know of anyway around registration of the stick. In settings you can not enable ADB? You will have to root it to disable the OTA (firestick2 is rootable). The other option is set a VPN to let you register it. Just some ideas...
Michajin said:
I don't know of anyway around registration of the stick. In settings you can not enable ADB? You will have to root it to disable the OTA (firestick2 is rootable). The other option is set a VPN to let you register it. Just some ideas...
Click to expand...
Click to collapse
Hi thank you so much for the reply! I tried to connect it with a wifi with VPN (hotspot with rooted smartphone with vpn, i checked the ip and the position) but it still gave me error. In settings i can enable developer options but i can't find them... Can you help me to root it? What should i look for?
Calciovita said:
Hi thank you so much for the reply! I tried to connect it with a wifi with VPN (hotspot with rooted smartphone with vpn, i checked the ip and the position) but it still gave me error. In settings i can enable developer options but i can't find them... Can you help me to root it? What should i look for?
Click to expand...
Click to collapse
I don't know how to get past registration. Here is the rooting thread.
https://forum.xda-developers.com/fire-tv/development/unlock-fire-tv-stick-2nd-gen-tank-t3907002
Also, did the VPN actually do the hotspot VPN? Did you check with a 3rd device? I have done VPN hotspot and my connected devices are not in the VPN.
hi! I tried thousands times to adb my fire stick on wifi. But it never pop up the adb authorize window. Finally, I pull out the usb line from charger and plug into PC. Then adb link again, the window pop up on TV and you can select "agree" to allow the adb debug.
Michajin said:
Also, did the VPN actually do the hotspot VPN? Did you check with a 3rd device? I have done VPN hotspot and my connected devices are not in the VPN.
Click to expand...
Click to collapse
thank you for the link, i'll take a look. However yes, the connected devices to hotspot were connected in vpn.
jjccblws said:
hi! I tried thousands times to adb my fire stick on wifi. But it never pop up the adb authorize window. Finally, I pull out the usb line from charger and plug into PC. Then adb link again, the window pop up on TV and you can select "agree" to allow the adb debug.
Click to expand...
Click to collapse
Hi! Can you explain me what do you mean in ''adb link again''? I connected fire tv with my pc but then i hadn't pop-ups
Calciovita said:
thank you for the link, i'll take a look. However yes, the connected devices to hotspot were connected in vpn.
Click to expand...
Click to collapse
With rooting and unlocking you can get into ADB VIA TWRP. You might run into an issue on connecting to ADB and still having keyboard access with a powered hub to power the stick and have ADB sideloading, it can be done though. but you can also work in advanced in twrp-terminal. You also have file manager. I am still not sure how to get past the setup though. I find it weird that it wont let you register it though...
Michajin said:
With rooting and unlocking you can get into ADB VIA TWRP. You might run into an issue on connecting to ADB and still having keyboard access with a powered hub to power the stick and have ADB sideloading, it can be done though. but you can also work in advanced in twrp-terminal. You also have file manager. I am still not sure how to get past the setup though. I find it weird that it wont let you register it though...
Click to expand...
Click to collapse
Thank you! I'll try this!

Categories

Resources