[Q] Cannot Unpair and Reset First Gen Moto 360 - Moto 360

Hello All! been having some difficulty with my Moto 360. Recently flashed a new CM13 nightly to my Verizon LG G3 and lost bluetooth pairings no big deal will just reset the watch. The watch no matter of battery level or if still docked on the charger will not unpair and factory reset. When off the charger it will make an attempt and turn off. On the charger it will attempt reboot and give me an error that android wear isn't responding i believe.
I have tried restoring bluetooth pairing through tibu on the phone in hopes of getting the watch back but it hasn't worked. The last thing i have not tried is going back to a older build and then trying to restore bluetooth pairings in hopes of getting the watch to be recognized.
I realize the bootloader is currently not unlockable on MM but is there a way to enter stock recovery and reset the watch or some other method i don't know of. I would like to avoid having to send the watch in for service.

Related

[Q] Stuck at "just a minute"

I installed a new ROM on my Note 3 and in order to re-pair it with the phone I reset Moto 360 and now I cannot get it paired again. In the Android Wear app it just shows as "Connecting" but I was able to pair it via Bluetooth settings. Now it is just stuck at a " Just a minute" with a circle going around. Before I started the pairing process Moto 360 was at 84% battery, so not sure if it's a battery issue.
With that said, is there any other way to pair the watch other then resetting to stock?
ajamils said:
I installed a new ROM on my Note 3 and in order to re-pair it with the phone I reset Moto 360 and now I cannot get it paired again. In the Android Wear app it just shows as "Connecting" but I was able to pair it via Bluetooth settings. Now it is just stuck at a " Just a minute" with a circle going around. Before I started the pairing process Moto 360 was at 84% battery, so not sure if it's a battery issue.
With that said, is there any other way to pair the watch other then resetting to stock?
Click to expand...
Click to collapse
You may have to reset the watch a few times, I saw someone else having an issue with getting it to connect before resetting it three times.
TheJesus said:
You may have to reset the watch a few times, I saw someone else having an issue with getting it to connect before resetting it three times.
Click to expand...
Click to collapse
Thanks, I got it working after resetting it few times.
Scribbled on Note 3.
Good christ mine has been a PitA to get up and running. The original update kept failing on me despite the fact it was charged to 100%.
Now, Ive reset it multiple times after the update, but i keep getting stuck on "connecting" on the phone and "just a minute" on the watch. This is after the pair code in the app and everything.

[Q] Moto X on Lollipop - Cannot connect

Hey guys,
Just got my new 2014 Moto X (coming from 2013) watch worked great with my old phone. Now, with the 2014 running 5.0, it will recognize the watch (it takes forever and sometimes does not see the phone) but when it does connect it lasts a second or two and then disconnects. Any ideas here?
Tried:
Restarting both
Bluetooth on the phone connected to my truck, so I know it is working
Had to full reset the watch, now it's working. Not sure if anyone else had this problem yet but looks like you need do a full wipe on the watch to get it working.

[Q] Failed to update?

Hi
Just got my ZenWatch and I paired it with my phone. And charged it to full 100%.
At this time the watch asked to do an update, and I said yes.
But now the watch starts and only gets to swirling color dots and no further.
I am new to the watch, and the ASUS e-manual always refers to something on the watch. But I can not access anything.
What can i do to enter recovery mod or do a factory reset or something else?
Just wants it to work again or at least ask for a BT connection to connect and get the latest version of Android wear from ASUS.
A bit desperate here

Watch stopped pairing to phone, apps crashing

So I noticed earlier today that the gapps were crashing on my moto 360... I couldn't use it. I did a reset of it and it repaired to my phone, which it was not pairing to earlier. Now... nothing is crashing but it's not pairing with my phone. Just says "Connecting..." Then says "Disconnected." Is my watch dead? I already reset it once and it's not working. Watch is very very hot and the battery is draining very quickly also. Dropped like 25% in ten minutes.
Everything on the watch is stock. No recovery or custom ROMs or anything.
I also have a Nexus 6 and man is my moto 360 been nothing but a headache this whole time. Im at the point where i simply hate the damn thing and would take $100 if someone wanted it. Android Wear has been nothing but a huge disappointment.
This issue stopped after I reinstalled the Wear app on my phone. Updated borked it.

bluetooth won't connect (not your typical won't connect)

I purchased a sont smartwatch 3 about a month ago and when I first got it and charged it up, it paired right away to my phone. Over the course of a few weeks I would notice there would be times when it would not connect to my phone. Turning bluetooth off and back on would fix this. I got tired of doing that so I unpaired the watch and deleted all android wear from my phone to start fresh. The watch would not connect. I have now been trying for a few weeks to get it working again. I'll list everything I have tried below ( not in order but as I think of them).Hoping for a new idea on this I haven't found:
- clear play services and play services framework cache
- in adb shell :adb shell am start -a android.bluetooth.adapter.action.REQUEST_ENABLE
- factory reset on watch
- forget all bluetooth devices on phone
- rooted watch and tried 6.0.1 rom
- hold power button till watch restarts 3 times
- locked and unlocked bootloader
- xperia connect software repair
Is there a bluetooth testing method anyone is aware of or a way to check my bluetooth integrity ? Maybe flash a bluetooth module ?
wich phone ? I have BT issue with my xperia Z5C : SW2, SW3, Zenwatch2....
non rooted nexus 5
It's working ! This makes no sense how though. I let the watch sit for days after my last attempt to pair it. Used Sony companion to return it to stock. Today I decided to try again. It was dead and had been for a week or so. I connected it to my computer via usb and I turned it on after letting it charge for about 5 mins. On my laptop I decided to check what bluetooth devices my computer could see. My smartwacth shows up in this list. I wish there was a camera on my face, it would've been priceless. I grab my phone and reinstall android wear. It finally shows in the app. I have been trying to fix this for weeks now and it just randomly works now. Maybe this may give something new steps to try for those that run into this issue.
2gttalon said:
It's working ! This makes no sense how though. I let the watch sit for days after my last attempt to pair it. Used Sony companion to return it to stock. Today I decided to try again. It was dead and had been for a week or so. I connected it to my computer via usb and I turned it on after letting it charge for about 5 mins. On my laptop I decided to check what bluetooth devices my computer could see. My smartwacth shows up in this list. I wish there was a camera on my face, it would've been priceless. I grab my phone and reinstall android wear. It finally shows in the app. I have been trying to fix this for weeks now and it just randomly works now. Maybe this may give something new steps to try for those that run into this issue.
Click to expand...
Click to collapse
my sony smart watch 3 5.1.1 dont pair with my galaxy A8 6.0.1 via bluetooth i tried every way please help me... thanx
Same Issue
2gttalon said:
It's working ! This makes no sense how though. I let the watch sit for days after my last attempt to pair it. Used Sony companion to return it to stock. Today I decided to try again. It was dead and had been for a week or so. I connected it to my computer via usb and I turned it on after letting it charge for about 5 mins. On my laptop I decided to check what bluetooth devices my computer could see. My smartwacth shows up in this list. I wish there was a camera on my face, it would've been priceless. I grab my phone and reinstall android wear. It finally shows in the app. I have been trying to fix this for weeks now and it just randomly works now. Maybe this may give something new steps to try for those that run into this issue.
Click to expand...
Click to collapse
My SW3 won't pair with my phone (OP2), i try all the optiosn you say
I try other phones too
BeStMaker said:
My SW3 won't pair with my phone (OP2), i try all the optiosn you say
I try other phones too
Click to expand...
Click to collapse
I dont think the fault lies with the watch and phone but more so with Google play services as this is needed to run and connect android wear as far as I know. Try uninstalling play services and reinstalling on the phone. If that doesnt help then try resetting the watch in pc companion. If this doesbt help then im unsure but I could only blame gplay services as all my android wear issues have been with this such as apps like watchmaker deleting itself off the watch after rebooting my phone (xperia Z2 rooted custom rom). I even tried factory resetting both but the issue still persisted so I gave up with it and decided to manually resync apps after every reboot.
You can try resetting your devices but I cant garentee this will solve your issues.
RJASSI21 said:
I dont think the fault lies with the watch and phone but more so with Google play services as this is needed to run and connect android wear as far as I know. Try uninstalling play services and reinstalling on the phone. If that doesnt help then try resetting the watch in pc companion. If this doesbt help then im unsure but I could only blame gplay services as all my android wear issues have been with this such as apps like watchmaker deleting itself off the watch after rebooting my phone (xperia Z2 rooted custom rom). I even tried factory resetting both but the issue still persisted so I gave up with it and decided to manually resync apps after every reboot.
You can try resetting your devices but I cant garentee this will solve your issues.
Click to expand...
Click to collapse
RJASSI21 Many thanks! i clear the google play services data and now all is working fine.
Thanks!
I have this problem occasionally with my LG G4. It works fine then all of a sudden it won't connect to the phone. Shows up in Bluetooth devices, but not in Android wear. Only way I find to sort the problem out is to unpair the watch from the phone which then activates a factory reset. Once done all is good again........well for a few weeks or so.
I let the clock DIE (battery) and then work for 2 weeks, now the same problem.

Categories

Resources