Related
Ok my phone is DEAD! Yes I have have read alot of posts and used my mate "Google" but they are all saying or pointing to the threads saying flash with the .sdf files with RSD which I have done Infact i've tried most .sdf images. I work in ICT so I know to do research first before posting but I'm not getting anywhere. I just hope i'm being a numpty and missed something.
I have an unbranded UK one original version 2.21 and I had successfully flashed with the available roms on here and others by following the steps, but last night I flashed it with PAYS rom and it was fine but then it all went pear shaped when I tried to flash it back to the original 2.21 rom via RSD Lite but it's just a black screen and when plugged in I get a charge light. The Battery is fully charged.
I can not enter Bootloader and when I enter system recovery it does not respond when pressing the bottom right hand corner.
RSD does see the phone connected and it runs through the process of flashing it but then it goes to re-boot and nothing. RSD says it's finished, it does not go through the process of re-booting the phone.
In RSD on the phone properties this is all I get:-
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 1e600209036f60010000d8ff0100
BP Die ID: 0000000000000000000000000000
AP Public ID: a9e56c008df05759e72a50cf0e4ce907eea6c0de
Please, please somebody help me!
Simple way to start off is to start with original UK 2.51 sbf. Forget 2.2 now and start from beginning. I bricked mine trying Pays too.
Sent from my MB525 using XDA App
chaihg said:
Simple way to start off is to start with original UK 2.51 sbf. Forget 2.2 now and start from beginning. I bricked mine trying Pays too.
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
Hi,
I have tried flashing the 2.51.sbf even tho it has the problems with downgrading. It does the same as the the other 5 or 6 i've tried.
Thanks for your suggestion tho.
I'm no expert, but is this where the touch all four corners going clockwise starting is upper left comes in?
Thought I read something about doing that when touching the single corner didn't work to get into recovery.
I could have misremembered (don't even know if it was in this forum), but it couldn't be that hard to try and it doesn't sound like you have much to lose.
maybe search four corners or something to figure out more.
Maybe time for factory repair
ABC_Universal said:
Maybe time for factory repair
Click to expand...
Click to collapse
I think it may be time to call Motorola. Thanks for the tips guys.
Just tried the battery hack to charge it but nothing, even uninstalled everyting and downloading fresh .sbf files from work and still DEAD!
RIP Moto Defy, it was only one week old!
On a life experience tho, my first even bricked device......woooohoooooooo!
I've had quite a few phones that I have customized from here, top effot guys. There are many greats minds on here.
Think as i've just lost it, it could be time to retire and go (dare I say it!) mainstream, run of the mill Nokia.....GULP!
In the future it would be better to post these issues in the thread of the ROM you are having issues with. More people who may have had similar issues may be able to help you and it helps the dev know what issues you're having.
it_ferret said:
I think it may be time to call Motorola. Thanks for the tips guys.
Just tried the battery hack to charge it but nothing, even uninstalled everyting and downloading fresh .sbf files from work and still DEAD!
RIP Moto Defy, it was only one week old!
On a life experience tho, my first even bricked device......woooohoooooooo!
I've had quite a few phones that I have customized from here, top effot guys. There are many greats minds on here.
Think as i've just lost it, it could be time to retire and go (dare I say it!) mainstream, run of the mill Nokia.....GULP!
Click to expand...
Click to collapse
Did you send it away?. You sounded like a bright guy we could have solved this together though . Ultimate thing you could have done was to flash one of the leaked original UK froyo sbf. If you still have not sent it then do this. BTW what is the bootloader version when you put it on vol up+ power ?
Have the same problem
The phone is briked. Only RSD is working but wathever sbf I flash, at the end i get the same black screen. I can not do anything. Please could someone help us?
If someone send their phone to service, please share the result.
The only sbf file that start the phone is
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF.sbf
but is working hard, the market is not working, everything i want to download is say that is downloading and nothing hapends.
Could someone tell me how to go back to original software?
The recovery mode is not working, when the android face is showing, i tap all corners and all display area but nothing hapend.
For recovery mode, you should click both vol up and vol down simultaneously. They changed the recovery button function with the new bootloader.
it_ferret said:
Ok my phone is DEAD! .....
Please, please somebody help me!
Click to expand...
Click to collapse
I had the same problem, but with luck i had read this thread :
http://forum.xda-developers.com/showthread.php?t=940647&highlight=market
and i succeded to restore my "brick" into one working phone.
Try it.
Many thanks to : adlx.xda
Edit: http://forum.xda-developers.com/showpost.php?p=11226369&postcount=5 works for me
Umm... I just bricked mine (HK version 2.51.0) as well.
I used ClockWorkMod Recovery for Defy to install 3.4.2 131-003 Orange Deblur. When the recovery finished, I found a tiny yellow line "E: can't open /cache/recovery/command" on the bottom of screen. Not sure if it was there before the recovery. When rebooted the phone showed the M logo for a minute, turned black for a second, and showed the M back again in loop.
Then I installed RSDlite 4.8 to flash the sbf directly. RSDlite finished and showed a "Pass". The phone was turned off automatically but couldn't be turned on again. The battery was fully charged before I started the update so it's not likely the battery charge problem.
Weudel said:
In the future it would be better to post these issues in the thread of the ROM you are having issues with. More people who may have had similar issues may be able to help you and it helps the dev know what issues you're having.
Click to expand...
Click to collapse
I did post in the thread.
Heys guys thanks for all the comments, but last night it came alive.
I used 3 different computers and in the end the last pc I used was a WIN 7 x64 machine and it managed to complete the .sbf install which was a 34.4 version then i applied my previously nand backup to 34.4.4 US T-Mobile version which is Jboogie3 rom.
Keep up the good work guys and gals. This is an excellent community to be in.
ABC_Universal said:
Edit: http://forum.xda-developers.com/showpost.php?p=11226369&postcount=5 works for me
I tried this install but that aswell failed.
Click to expand...
Click to collapse
im a newbie at this and did pays flash but had probs couldnt dial out ect ect so went to recovery but could not get bottom left hand screen work so after half day of trying i clicked both bottom -vol and top+ vol and restart button on top and it worked!!! but thought id give the rom one last go so did factory reboot flashed cash ect restarted signed into blur and now works great pleased i stuck with it...cheers pays
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.
Hey guys,
it looks like i've got a serious problem. Yesterday, while surfing the Net, i got a bunch of forcecloses (android.media, android.app.widget e.t.c.). I managed to reboot it, but afterwards i got the brick. For two hours the device stayed playing boot animation. I managed to charge it and tooday the problem still exists.
What should i do? How can i do a Hard Reset?
Thank you.
Moises08 said:
Hey guys,
it looks like i've got a serious problem. Yesterday, while surfing the Net, i got a bunch of forcecloses (android.media, android.app.widget e.t.c.). I managed to reboot it, but afterwards i got the brick. For two hours the device stayed playing boot animation. I managed to charge it and tooday the problem still exists.
What should i do? How can i do a Hard Reset?
Thank you.
Click to expand...
Click to collapse
Have you done a paper clip reset ???
Insert paper clip in reset hole lower left of unit.
Should reset unit.
no result.
haven't booted yet. I have left it 4 hours ago and went to sleep, woke up a minute ago and it still playes blue "android" animation. Have tried recovery, a green gui with ! appeared, but in 5 minutes - reboot with some vibration and again... ACER-logo and forever-boot. Should i flash it?
I've got same problem as you, and when i've tried to flash it the software on the Pc asked me the CPU ID, that is very difficult to have and also, if you finally can found it, there's the chance that is not recognized from the software as happen to me.
Moises08 said:
haven't booted yet. I have left it 4 hours ago and went to sleep, woke up a minute ago and it still playes blue "android" animation. Have tried recovery, a green gui with ! appeared, but in 5 minutes - reboot with some vibration and again... ACER-logo and forever-boot. Should i flash it?
Click to expand...
Click to collapse
Try this: put in your sd card the file update.zip ( i will provide a link to you shortly ). Then power up the device to recovery and it should begin a recovery process from sd thanks to the update.zip. When i did it, anything on my tab remained the same: data, photos, apps...
p.s.
from there: http://vache-android.com/v1/index.php?site=files&file=109
I have recently started to update it to the gen 2 (found it on russian servers,can share a link if you want). Again android-guy with "!" on the chest appeared and after a while the device rebooted. It has being booted now for a 10 minutes (again android blue animation). I don't think this is normal. Or is it?
Moises08 said:
I have recently started to update it to the gen 2 (found it on russian servers,can share a link if you want). Again android-guy with "!" on the chest appeared and after a while the device rebooted. It has being booted now for a 10 minutes (again android blue animation). I don't think this is normal. Or is it?
Click to expand...
Click to collapse
Just a "guess" type suggestion.
Can you install just the update you have on a clean SdCard with you PC then put back into the A100 and try a reboot.
Reboot of a install do take quite a few minutes. not more than 20 or 30 though.
try with the file i've gave you before. At the starting try several combination. Not only power&volume up, also with volume down and also BOTH volume pressed hardly.
should the card be absolutely clean containing only update.zip?
and IS the green android guy with ! on the chest normal, or it's my issue?
Update:
Have flashed it with gen 2 got it with on + volume up button, but still no result. The upgrade was succsesfulkl, but the animation still plays.
Maybe it is because the SD card wasn't empty.
Moises08 said:
I have recently started to update it to the gen 2 (found it on russian servers,can share a link if you want). Again android-guy with "!" on the chest appeared and after a while the device rebooted. It has being booted now for a 10 minutes (again android blue animation). I don't think this is normal. Or is it?
Click to expand...
Click to collapse
Link please?
Moises08 said:
and IS the green android guy with ! on the chest normal, or it's my issue?
Click to expand...
Click to collapse
What it means is "he" can't find the update file.
However you are placing it on a clean formatted sdcard is the thing you have to concentrate on.
I wish I had more info to give you.
---------- Post added at 03:00 PM ---------- Previous post was at 02:23 PM ----------
****************************
Copied from Acer Tablet Forum:
These instruction are for the A500 .
Maybe the steps they use may assist you for the A100.
****************************
tumpy
Iconia Lurker
Member #
3207
Join Date
Oct 2011
Posts
8
Liked
0 times
Lol. I finally got it working went back 3.0 this is the instruction i follow bellow, doing all this and didn't loose any apps or info after going back and update.
METHOD 2 - thanks GamezR2EZ
This is even easier because it does not need your UID. It is just flashing as a normal update but actually it is an older HC version that is rootable by Iconiaroot.
1. Download this package Downgrade_not_stable_zip
2. Extract the update.zip from it and place it on your external SD card.
3. Turn off your tab and then turn it back on while holding Volume Down key. This will automatically flash the update.zip from your SD card.
4. After flashing is finished you'll have unstable Honeycomb 3.0.1 - gives errors and crashes but you only need it to root and install CWM. If it fails to boot try to hard reset your device *.
5. Install Iconiaroot 1.3, root your beast and then install CWM from thor's site(there you can find the latest version) or use Acer Recovery Installer from the Market, or look at the original thread here
6. Boot into CWM and flash whatever ROM you like!
kdkinc said:
Downgrade_not_stable_zip
Click to expand...
Click to collapse
Could you provide me with this file?
this guy seems to have a similar problem
painter_ said:
Link please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1332159&page=3
delete post
eremsoft said:
http://forum.xda-developers.com/showthread.php?t=1332159&page=3
Click to expand...
Click to collapse
The file linked there is no good. Also the poster removed the link since the mechanism Acer used rendered the file useless once it is installed. The poster claims he found a version on a Russian site. If he can provide a link maybe some goodies can be extracted from it.
painter_ said:
The file linked there is no good. Also the poster removed the link since the mechanism Acer used rendered the file useless once it is installed. The poster claims he found a version on a Russian site. If he can provide a link maybe some goodies can be extracted from it.
Click to expand...
Click to collapse
*****Info purpose only ****
http://www.multiupload.com/Q8Z7BXTFTV
eremsoft gave me links to the version he found on the Russian forum.
Thank You, Eremsoft!
eremsoft said:
Hi,
i can't post external links in forum? because still have not 8 post
About new update
http://www.multiupload.com/YRSV5O89EC
this file need to be decrypt with Acer Update Decrypter
or link to russian site
http://narod.ru/disk/30583572001/ACER.zip.html
this file already decrypted
Click to expand...
Click to collapse
hello i was wondering if there way anyone out there how could please help me with this screen flickering problem i have tried using clock work recovery i have used odin and reset my device a good 6 times today everything works fine its just the screen in flickering non stop no matter what i do it wont work but when i put it into download mode the screen is fine and on the start up when it says "Samsung Galaxy Tab 3" the screen is fine but it only is flickering when the device boots up can someone please help me i just received this as a gift for christmas and barely got any use out of it thanks you can contact me on my email it would be very appreciated :[email protected]
bigdaddywelker1 said:
hello i was wondering if there way anyone out there how could please help me with this screen flickering problem i have tried using clock work recovery i have used odin and reset my device a good 6 times today everything works fine its just the screen in flickering non stop no matter what i do it wont work but when i put it into download mode the screen is fine and on the start up when it says "Samsung Galaxy Tab 3" the screen is fine but it only is flickering when the device boots up can someone please help me i just received this as a gift for christmas and barely got any use out of it thanks you can contact me on my email it would be very appreciated :[email protected]
Click to expand...
Click to collapse
Can make a picture, how it looks when its flickering and post this.
For me it looks like that is an bootloader Problem !!!
Have you testet when your go back to real stock, i mine flash stock Firmware with Odin , is that solved ????
Flickering screen
bierma32 said:
Can make a picture, how it looks when its flickering and post this.
For me it looks like that is an bootloader Problem !!!
Have you testet when your go back to real stock, i mine flash stock Firmware with Odin , is that solved ????
Click to expand...
Click to collapse
How can I go back to real stock and un root this device I have the same problem. I only got it today and I am desperate
bsquirrell said:
How can I go back to real stock and un root this device I have the same problem. I only got it today and I am desperate
Click to expand...
Click to collapse
Take a look to the thread " unbrick and restore " from Tomsgt here you find a guide
galaxy tab 3 7
I have finally managed to fix the flickering screen by re installing a new firmware. Odin 3.07 wouldnt work, but odin 3.185 did for some reason!!! Now is there a root for this that won't put me in this position again. I am sure this has been asked and answered somewhere else, but I can't find it.
The previous root I did installed an old firmware, which caused the problem,
The auto display feature on this tablet still leaves the screen too dark,so I have had to disable this feature. Anny ideas anyone, thank in advance for any help
bsquirrell said:
I have finally managed to fix the flickering screen by re installing a new firmware. Odin 3.07 wouldnt work, but odin 3.185 did for some reason!!! Now is there a root for this that won't put me in this position again. I am sure this has been asked and answered somewhere else, but I can't find it.
The previous root I did installed an old firmware, which caused the problem,
The auto display feature on this tablet still leaves the screen too dark,so I have had to disable this feature. Anny ideas anyone, thank in advance for any help
Click to expand...
Click to collapse
Go to dev Thread and usw the thread Cwm for sm-t210/r
http://forum.xda-developers.com/showthread.php?t=2433853
I had the same issue when i was stuck on boot loop, install a different recovery, i used CWM, and then install a different rom. Allot of the stuff here works across different platforms and it works fine but sometimes it cause the flicker.... good luck
I think you went into the developer options and clicked on the show screen updates. It will flicker all the time until you disselect it.
Sent from my SM-T210 using xda app-developers app
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Explain here... You'll get your phone unbricked. Never say die
Sent from my P6-U00 using XDA Premium HD app
PulseDroid said:
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Click to expand...
Click to collapse
Well , I was trying to flash the CleanRom project , I'have made a post about that to ,
The Instructions were wery clear to me i followed them exactly how it was writen in tutorial.
I have an international verzion of P6 and according to that turorial , ( http://forum.xda-developers.com/showthread.php?t=2625680 )
in order to flash that room i moust firstly flash an Chineze verzion which comes with unlocked bootloader , then i did that
I downloaded the rom put it on phone flashed via setteings update software , then everything went fine the process it seelf showd me
completed 100% and in the end sayd OK , then my phone turned off, and it's never been on eversince :A
As of now the phone is totally dead black screen , I've tryed everything it doesent go in any mode
When i plug in the power cord it only shows a red light indicator.
I belive this is a Hard Brick , not soft brick .
Warranty? Did the same to mine got I repared for free...
jagwar1 said:
Warranty? Did the same to mine got I repared for free...
Click to expand...
Click to collapse
nope , no warranty
Nexhmedin said:
nope , no warranty
Click to expand...
Click to collapse
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
rupro327 said:
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
Click to expand...
Click to collapse
Yes i did brick my P6 and nope I aint gona tell them Im a noob :A
The thing here is to get help in here is not about send it back to china so if you have any other idea , your welcome to share.
I have no warranty , even if it had this phone is buyed in china , and traveled to the otherside of the world :it would cost as mouch as the phone itseelf to send it back to service.
Try flashing the latest TWRP, it has off mode charging. Can you put your phone in fastboot mode via adb ?
Not Hard Brick!
Happened to me before and guess what? Tried very simple thing - and it worked.
Take your sdCard out of the phone.
Replace the dload folder with the extraction from either the B111 from the Huawei site or the B125 from here on xda
Reinsert card and press all buttons down till phone goes into internal recovery.
Your main problem will be having enough battery to get you twenty minutes.
If your red light is functioning, you probably haven't blown your motherboard.
Sent from my LG-D802 using XDA Premium HD app
Nexhmedin said:
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
Click to expand...
Click to collapse
you device boot an loop in huawei screen.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Nexhmedin said:
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Click to expand...
Click to collapse
Only solution for that is to take your phone to local service. I am talking from experience.
Sent from my ME371MG using xda app-developers app
Can you check if you plug it into you computer that your computer connects to it or makes a sound? That can probably prove that the motherboard is fine and maybe your LCD is broken or has loose connection.
Happened to me before. Black screen, only red led, nothing else working. It happened that I got scammed by a seller.
What I ended up doing was taking apart the phone and I found that the LCD connection was loose. Fixed that, then I saw that the phone wouldn't boot. Loaded B111, B118, nothing worked. I then got B125, and it miraculously worked.
You could try what I did, but it is quite risky and I was very lucky.
I have to agree with goce. Unless you are experienced and willing to mess around with things, you should go find local service.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
What can I do on my phone just flashes the red light and include only the logo of huawei.
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
gurvinder76 said:
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
Click to expand...
Click to collapse
I think you should download the TWRP recovery for jelly bean from surdu and flash it from bootloader. If you are on the international this is the method for unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2666116
Flash a custom rom next
Sent from my P6-U06 using XDA Premium 4 mobile app