Related
This is a clockworkmod recovery built completely from source. It has the latest cwm updates and the latest ics kernel (eMMC erase bug fixed). This should also have the hanging backup bug fixed. I havent had time to make a billion backups to test this but the few i did without the .hidenandroidprogress file worked like a charm If you do get a hanging backup that is all koush's fault as i just used his latest sync to cwm.
To get adb working on this:
add these lines to "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf"
-add them in the section that says [Google.NTx86] and the section that says [Google.NTamd64]. just make it look like the ones that are already there but with this code:
Code:
;
; Samsung Hercules
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_D001&REV_0231&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_D001&MI_01
- then right click "my computer" and go to device manager
- you will see a driver with a yellow exclamation point...right click it and click "update driver software"
- click "browse my computer"....then click "let me pick from a list of device drivers on my computer"
- then click all devices
- click "have disk..."
- go to "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf"
- click to allow installation of driver
- presto
DOWNLOADS:
recovery.img / recovery.tar.md5
Click to expand...
Click to collapse
Click to expand...
Click to collapse
CHANGES:
Changes here.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
so no one tried this?
Excellent.. Thank you... Now if somebody could just put the ADB together with the CWM that would be proper... thanks Man.
Can you *please* elaborate on the instructions for ADB. Just put some WinDex on it... I want my ADB back..
Sent from my SGH-T989 using xda premium
Is this your own version of the CWM included in ROM Manager? Can you make sure it's updated in ROM Manager? It sounds like this one is much better, I hope it becomes default
updated to latest commits by koush
sk8erwitskil said:
updated to latest commits by koush
Click to expand...
Click to collapse
Thank you very much! Your work is much appreciated!
You first lolz
Recoveries made from ics kernels scare me still
Sent from my SGH-T989 using Tapatalk 2
Flashed via Odin w/o a problem here
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
Adb works just fine as well
Code:
C:\android-sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
43492893 recovery
C:\android-sdk\platform-tools>adb shell
~ # ls
ls
boot init sbin
cache init.qcom.lpm_boot.sh sd-ext
charger init.qcom.sh sdcard
data init.qcom.usb.sh sys
datadata init.rc system
default.prop lpm.rc tmp
dev proc ueventd.goldfish.rc
emmc res ueventd.rc
etc root
~ #
Made a backup and then restored from backup; all good
Dear Community,
I stucked with my Samsung N7105 since 2 days , so im requesting for your power & knowledge
After Updating the phone i dont get any response, i only have access to the download-mode, which output is:
Code:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
I installed the samsung usb-driver 1.5.43 and tried Odin 3.07 / 3.09 to get CWM (CF-Autoroot) on it. Device was detected, but odin is requesting for a PIT-file, so i gave him this one
http://forum.xda-developers.com/showthread.php?t=2137008
also tried the one from Dr. Ketan (which seems to be the same)
http://d-h.st/hwQ
output from odin (tried different versions & usb-ports):
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So i tried Heimdall, from the official source http://glassechidna.com.au/heimdall/, because of the better debug-output in command-line.
First step was, getting/printing the PIT...failed - It seems Heimdall also getting no response (connection-problem?). Im abit unsure with the usb-drivers. As described I replaced the samsung driver with zadig.
But in Zadig i have two options , which seems to be related to the samsung-drivers. "CDC Abstract Control Model" & "Gadget Serial" --> I replaced the 1st one with the libusb-win32(v1.2.6.0) Drivers.
There are also libusbk(v3.0.5.16) & WinUSB(v6.1.7600.16385) for choice, but as i understand Heimdall is using the libusb-win32-Libary(?)
Trying to get/print the PIT with Heimdall I get the following:
G:\samsung\heimdall-suite-1.4.0-win32>heimdall print-pit --no-reboot --usb-log-level warning
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
libusbx: warning [winusbx_claim_interface] auto-claimed interface 0 (required to claim 1 with WinUSB)
Setting up interface...
Initialising protocol...
libusbx: warning [winusbx_submit_control_transfer] ControlTransfer failed: [87] Falscher Parameter.
libusbx: warning [winusbx_submit_control_transfer] ControlTransfer failed: [87] Falscher Parameter.
libusbx: warning [winusbx_submit_control_transfer] ControlTransfer failed: [87] Falscher Parameter.
libusbx: warning [winusbx_submit_control_transfer] ControlTransfer failed: [87] Falscher Parameter.
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: Failed to receive PIT file size!
ERROR: Failed to download PIT file!
Ending session...
ERROR: Failed to send end session packet!
Releasing device interface...
libusbx: warning [libusb_exit] some libusb_devices were leaked
Click to expand...
Click to collapse
Is he claiming the wrong Interface? Steady I get a little frustrated, have someone any idea or are there other methods to get informations from the phone...flashing a a new recovery on it?
U need to install rescue firmware 4.1 which was uploaded by steff in dn3 latest post
I created the thread on how to recover bricked note 2
You can read in first or second page
I am travelling so at the moment I can't upload the recscu firmware but u can request steff195 to upload this here
It has full rom image plus pit file u can fix your phone via 3.07 odin
Then u can flash any stock 4.4.2 to bring it back to bug free life
And then rooting and etc
Sent from my GT-N7100 using XDA Premium 4 mobile app
OK, being a Canadian I'll equate this to getting my car stuck in the snow, I just need a little push hopefully...
Ever since updating to 4.4.2 OTA (or possibly since rooting) my Note 2 would randomly reboot once or sometimes twice a day while running the stock ROM from Rogers (similar to the ATT Rom). Sidenote: I attribute the problem to software but my gut tells me I might also have a hardware issue. I tried doing a restore once on the stock and the phone ran a little faster but was still plagued with the random rebooting issue.
I decided that since my contract was up in a couple of months I would ditch the stock rom and try a custom rom maybe my reboot issue would get better on a custom ROM. I thought CM11 would be a safe bet. So, I added Philz Touch recovery via Odin 3.07 (see versions below) I did a full back up and flashed the new rom using Philz Touch recovery.
CM11 ran fine for about three or four days BUT the phone still did one or two random reboots!
One night it had just finished receiving a text and about a minute later did a reboot and POOF! I was at the Samsung Logon screen soft bricked.
I can boot into download mode (power+down volume+home) and I can boot into CMW recovery (power + up volume + home) EXCEPT not into Philz Touch anymore, it boots into "CMW-based Recovery v6.0.5.0" What happened to Philz Touch I am wondering?
(I tried using Kies but Kies won't recognize the phone connection so I have uninstalled Kies)
CWM is throwing out a bunch of errors on start too:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount/cache/recovery/last_log
E:Can't open/cache/recovery/last_log
E:Can't mount/cache/recovery/last_install
E:Can't open/cache/recovery/last_install
CMW seems to throw errors like this whenever I try to use any of the options. I can't install my backup zip or wipe or do much of anything.
When I run Odin the connection on the com port is recognized but when I try to load a stock ROM or any other ROM I get a write FAIL error. I've tried different versions of Odin and different cables, doesn't seem to get me past this write error.
What's my next step? Thanks for any advice or help in advance.
Galaxy Note ii (sgh-i317m Rogers Canada)
Cyanogenmod (cm-11-20140618-NIGHTLY-t0lte)
CMW 6.0.5.0
Philz Touch 6.07.09
Odin 3.07, 3.09 various versions.
Windows 8
mkochsch said:
OK, being a Canadian I'll equate this to getting my car stuck in the snow, I just need a little push hopefully...
Ever since updating to 4.4.2 OTA (or possibly since rooting) my Note 2 would randomly reboot once or sometimes twice a day while running the stock ROM from Rogers (similar to the ATT Rom). Sidenote: I attribute the problem to software but my gut tells me I might also have a hardware issue. I tried doing a restore once on the stock and the phone ran a little faster but was still plagued with the random rebooting issue.
I decided that since my contract was up in a couple of months I would ditch the stock rom and try a custom rom maybe my reboot issue would get better on a custom ROM. I thought CM11 would be a safe bet. So, I added Philz Touch recovery via Odin 3.07 (see versions below) I did a full back up and flashed the new rom using Philz Touch recovery.
CM11 ran fine for about three or four days BUT the phone still did one or two random reboots!
One night it had just finished receiving a text and about a minute later did a reboot and POOF! I was at the Samsung Logon screen soft bricked.
I can boot into download mode (power+down volume+home) and I can boot into CMW recovery (power + up volume + home) EXCEPT not into Philz Touch anymore, it boots into "CMW-based Recovery v6.0.5.0" What happened to Philz Touch I am wondering?
(I tried using Kies but Kies won't recognize the phone connection so I have uninstalled Kies)
CWM is throwing out a bunch of errors on start too:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount/cache/recovery/last_log
E:Can't open/cache/recovery/last_log
E:Can't mount/cache/recovery/last_install
E:Can't open/cache/recovery/last_install
CMW seems to throw errors like this whenever I try to use any of the options. I can't install my backup zip or wipe or do much of anything.
When I run Odin the connection on the com port is recognized but when I try to load a stock ROM or any other ROM I get a write FAIL error. I've tried different versions of Odin and different cables, doesn't seem to get me past this write error.
What's my next step? Thanks for any advice or help in advance.
Galaxy Note ii (sgh-i317m Rogers Canada)
Cyanogenmod (cm-11-20140618-NIGHTLY-t0lte)
CMW 6.0.5.0
Philz Touch 6.07.09
Odin 3.07, 3.09 various versions.
Windows 8
Click to expand...
Click to collapse
Try downloading philz again then flash it via odin then wipe everything but the modem and the ex sd then reboot the recovery and when it says to apply root hit no then the phone will reboot into recovery then flash the rom again and let me know what happens
First things first. Thank you for having a look at this. I'm really trying not to do a PIT flash on this one.
This is what happens when I try to flash Philz Touch (6.07.9 t0lteatt) using Odin 3.09. The progress bar goes about 3/4 of the way across and then in big red letters "fail" (see log below). This is the same version of Philz Touch I was running.
How do I "not wipe" the modem from CWM recovery? Do you mean go into "mounts and storage" and start formatting? BTW none of these directories will mount at the moment. I get: 'Error mounting /system' etc.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-t0lteatt.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
p.s. Is there any way to use adb.exe to diagnose exactly what the issue might be?
You need to update your recovery. I use TWRP for all roms.
System and data wiping won't remove a modem.
rangercaptain said:
You need to update your recovery. I use TWRP for all roms.
System and data wiping won't remove a modem.
Click to expand...
Click to collapse
I initially did my Nandroid backup on my external SD card. TWRP probably won't read a CWM backup.
When I try to restore my backup I get the following:
Checking MD5 sums...
All MD5 checksums verified
Erasing boot before restore...
Restoring boot image...
Restoring system...
E: format_volume: make_ext4fs failed on /dev/block/mmcblk0p13
Error while formatting /system
mkochsch said:
I initially did my Nandroid backup on my external SD card. TWRP probably won't read a CWM backup.
When I try to restore my backup I get the following:
Checking MD5 sums...
All MD5 checksums verified
Erasing boot before restore...
Restoring boot image...
Restoring system...
E: format_volume: make_ext4fs failed on /dev/block/mmcblk0p13
Error while formatting /system
Click to expand...
Click to collapse
What philz recovery did you download maybe Make sure you downloaded the right one for your phone I can't remember what one the i317m has to be
And did you move or rename your backup?
terpin32 said:
What philz recovery did you download maybe Make sure you downloaded the right one for your phone I can't remember what one the i317m has to be
Click to expand...
Click to collapse
Philz Touch 6.07.09
rangercaptain said:
And did you move or rename your backup?
Click to expand...
Click to collapse
Move or rename, no. Backed up to laptop.
mkochsch said:
Philz Touch 6.07.09
Click to expand...
Click to collapse
I know you had that one but make sure you got the right one for your model but I would flash a newer one over it in odin and that should fix your problem
terpin32 said:
I know you had that one but make sure you got the right one for your model but I would flash a newer one over it in odin and that should fix your problem
Click to expand...
Click to collapse
It just does the same as every other version of Philz Touch and everything else I try to flash.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-t0lteatt.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Is it possible that the built-in SD card is the problem?
mkochsch said:
It just does the same as every other version of Philz Touch and everything else I try to flash.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-t0lteatt.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Does the rom boot up?
No. It is soft bricked. I get the Samsung screen. I can boot into both download mode (Volume down) and CMW (volume up). However in download mode Odin fails (from versions 1.85-3.09). In CWM mode the aforementioned errors occur when I try to flash roms, restore NAND backups or mount directories.
I am getting almost the exact same issue. Mine kept randomly rebooting then one day it crashed and went to a bootloop. I have tried flashing different roms and recoveries however, it just sits on the Samsung note II splash screen.
I have had to go back to my captivate just to have a working phone... I have about given up.
Basically woke up with my phone as a brick... phone crashed when my alarm was supposed to go off (luckily I was already awake) and now hangs on the boot splash screen.
Device is an i747m, previously running S3Rx 3.0 (Android 4.3) with MK5 bootloader and modem. CWM 6.0.4.7 installed.
I am able to boot into both recovery and download mode.
However, in recovery mode, I get the errors:
Code:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install
Furthermore, if I try to factory reset, I get the error:
Code:
Formatting /data...
Error mounting /data!
While in recovery, I am not able to flash a new recovery or ROM. There are no errors when flashing, however, after rebooting nothing has changed. I'm assuming that's because the system cannot access the storage.
Through Odin, I can flash TWRP with no errors. However, once I try to boot into recovery, I am still on CWM 6.0.4.7.
Through Odin, I am unable to flash ROMs (trying to flash 4.3 MK5 stock rom). I am using Odin 3.07 on a W7 x64 computer with Samsung drivers installed and an official Samsung USB cable.
I receive the error:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUEMK5_I747MOYCEMK5_I747MVLUEMK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It appears that there is a problem with the internal memory since I can't read/write, but I am unsure if it is fixable.
I have come across this thread, but I am skeptical if it will work since it is for the Verizon S3.
I also came across this thread in my research, but I can't get cygwin to download >.> It seems promising, but I am unable to try it at the moment.
Any help or suggestions would be greatly appreciated. Please let me know if any additional information is required.
Have you tried flashing a 4.4.2 ROM?
audit13 said:
Have you tried flashing a 4.4.2 ROM?
Click to expand...
Click to collapse
Yes, I have tried flashing the 4.4.2 NE6 ROM using Odin with the same result (NAND write fails).
I have also tried flashing via Heimdall. No success there either. Heimdall is able to upload the file to my device (according to the progress bar), but then terminates with, ERROR: Failed to confirm end of file transfer sequence!
Also, the PIT file I extracted from my device via Heimdall does not match a "normal" i747m 16gb PIT found on the internet... I also cannot flash the 'normal' PIT onto my device (same error as above).
It's possible the internal memory chip is damaged which is not easy to repair. Simplest fix may be to buy a used s3 with a smashed screen and do a motherboard swap.
Yeah, that's what I'm thinking too at this point since I can't get anything to write onto the memory. I just loaded up Aroma File Manager through recovery and it looks like most of the files on my internal memory are gone, even though I have not been able to successfully factory reset through recovery. At least I have TiBkps of everything.
Do you think I could franken-phone using an i9100 (international model S3)?
Boot into download to find out.
First, sorry for my bad Eng
I flashed my phone with some rom cook for N7100 and It running smoothies, but this morning, my phone auto restart and stuck at logo screen. I get into TWRP and find there is no OS and no internal memory, after try everything(I known), last chance I used Format Data, but It still not working. Tried to flash other Rom, even stockrom by Odin, but it gets:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I recorded the video too but I dont have enough post to post link, so sorry:
/watch?v=U8V_3aRfucw (youtube)
Updated video:
https://youtu.be/U8V_3aRfucw
Logo screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Internal Storage 0MB:
Wipe failed:
Data Format failed:
SD Card folder empty:
I really need help to solve this problem. Please help me.
Thanks.
manhtidus said:
First, sorry for my bad Eng
I flashed my phone with some rom cook for N7100 and It running smoothies, but this morning, my phone auto restart and stuck at logo screen. I get into TWRP and find there is no OS and no internal memory, after try everything(I known), last chance I used Format Data, but It still not working. Tried to flash other Rom, even stockrom by Odin, but it gets:
I recorded the video too but I dont have enough post to post link, so sorry:
/watch?v=U8V_3aRfucw (youtube)
Logo screen:
Internal Storage 0MB:
Wipe failed:
Data Format failed:
SD Card folder empty:
I really need help to solve this problem. Please help me.
Thanks.
Click to expand...
Click to collapse
Go to wipe click data click advance click change file system to fat32 and go to wipe again click advance click file system and click ext4 done
Or
Try Odin best guide
xress7 said:
Go to wipe click data click advance click change file system to fat32 and go to wipe again click advance click file system and click ext4 done
Or
Try Odin best guide
Click to expand...
Click to collapse
Thanks for reply, I tried that too but always notice:
Code:
Updating partition details...
"Failed to mount '/efs' (Invalid argument)
"Failed to mount '/cache' (Invalid argument)
"Failed to mount '/system' (Invalid argument)
"Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
And Odin failed too.
Someone please help....
Sorry for spam but help me please, I don't know find where to help
Odin fails when trying to install sboot.bin for one or all of these reasons:
the ROM is not made for the phone;
need to use the original Samsung USB cable;
need to use a different USB 2.0 port;
the ROM's bootloader is older than the bootloader in the phone; and/or
the phone's memory chip has failed and you need to replace the motherboard.
Did the ROM come from sammobile.com?
audit13 said:
Odin fails when trying to install sboot.bin for one or all of these reasons:
the ROM is not made for the phone;
need to use the original Samsung USB cable;
need to use a different USB 2.0 port;
the ROM's bootloader is older than the bootloader in the phone; and/or
the phone's memory chip has failed and you need to replace the motherboard.
Did the ROM come from sammobile.com?
Click to expand...
Click to collapse
The "phone's memory chip" part is the scariest part and I hope its not
I used "RESURRECTION REMIX [5.8.0]" Rom, and I tried flash Stock Rom N7100XXUFNI4_N7100OLBFNI1_XXV but it failed.
And I don't understand part "the ROM's bootloader is older than the bootloader in the phone". Where can I check it?
You confirmed that the phone model # is gt-n7100 in download mode? Did you get the stock firmware for the n7100 from here: https://www.sammobile.com/firmwares/database/GT-N7100/ ?
audit13 said:
You confirmed that the phone model # is gt-n7100 in download mode? Did you get the stock firmware for the n7100 from here: https://www.sammobile.com/firmwares/database/GT-N7100/ ?
Click to expand...
Click to collapse
Yes, I downloaded the stock firmwave form Sammobile,
Download mode screen showed:
Code:
ODIN MODE
PRODUCT NAME: GT-7100
CURRENT BINARY: Custom
SYSTEM STATUS: Offical
KNOW WARRANTY VOID: 1
RP SWREV: A2
Sounds like the memory chip could be defective.
Try flashing twrp 2.87 and see if that works. If it doesn't work, you can try a cell repair shop to see if they can force flash it.
audit13 said:
Sounds like the memory chip could be defective.
Try flashing twrp 2.87 and see if that works. If it doesn't work, you can try a cell repair shop to see if they can force flash it.
Click to expand...
Click to collapse
Still cant flash it:
Code:
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just like the phone refuse to change anything in it :crying:
If cant find any solution, so last chance is bring it to store and pray
I admit it doesn't look good.
A cheaper solution may be to buy a used phone with a smashed screen and working motherboard.
Thanks for your helping.
I'll look for some chance from terminal or adb sideload, bad thing is last night it still working perfectly. so sad
manhtidus said:
Thanks for reply, I tried that too but always notice:
Code:
Updating partition details...
"Failed to mount '/efs' (Invalid argument)
"Failed to mount '/cache' (Invalid argument)
"Failed to mount '/system' (Invalid argument)
"Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
And Odin failed too.
Click to expand...
Click to collapse
Try pit for odin
xress7 said:
Try pit for odin
Click to expand...
Click to collapse
I'm finding PIT file for flash, but still get this:
Code:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe not right PIT file, I flashed 2 file "PIT_N7100_16GB_20121102.pit", "t03g_0907.pit" found on internet, but not working
Looks like you'll have to either take it to a cell shop or replace the motherboard.
Tried to use adb sideload to install other recovery, install perfect but after restart seem nothing change.
Tried change timezone on TWRP, but after restart, it did not save changes.
Same happened with my note 2 tried every thing but Nand is corrupted .there are only 50% chance .
Wow, I guest I'm the first one get this error:
After find out can push file to mobile by adb push XXX, I tried reinstall rom, and alot of stuffs to test, now I get this error when use "Data Format" on TWRP: "Unable to get block size for wipping crypto footer." and still
"Unable to wipe data
Unable to format to remove encryption --> I guess I need to do something in here
Failed to mount /efs, /cache /system /data
Unable to mount storage
Hope someone will help my resolve this
Update:
Sadly, After reboot phone, everything gone, nothing saved.
In my /dev/block/ there is no file mmcblk0p0 - 16 , just have loop0-7, ram0-15