I was on RR 5.6.7 rom everything was fine but suddenly i kept getting random lags(the lags stopped when i turned radio off in the phone information in the *#*#4636#*#* menu) and my sim wasn't detected.
flashed stock rom sim worked
tried to re flash RR,cm latest version and benghazirom all of them had the same problem .
now im on dn4 sim/service are working just fine
idk if its just a cm problem or what. i really need a solution
here is some log files(from data/log folder) i hope someone can look into it: i can't post it on here because im below 10 posts if anyone interested in helping me pm me and i will send u the google drive folder url
sorry
Sorry for posting outside links but its google drive after all and these are some log files :
drive.google .com/folderview?id=0B5MEYCN0pjvQMWFMS3FhSkJnS1U
anyone ;-;
Can anyne please help me
Try revert into stock with odin and clean flash?
brokenaxe said:
Try revert into stock with odin and clean flash?
Click to expand...
Click to collapse
Already tried that
The sim works fine on stock and dn4 rom .
Doesn't work on any cm rom idk why ...
Bump
Bump
Bump
same for me :victory:
no sim on CM ROM
Has anyone found a solution ? I want to use rr rom again please ...
Related
I am on latest ucyan facing an issue of cant set wallpaper on homescreen even after reboot tried everything can anyone help me in this it is very annoying
Why you are asking here in dev. section?
Bcs i in rom section i got no answers
Can u help me in this?
which version you are using?
I am using b04 and it works fine.
you can try with that.
In b05 there is a issue
I have not tried 12.1 b05 as for me b04 works fine.
If you dont want the kernel changes done in b05 you can try b04 its good for daily use.
Can u give me link other than mega of b04 mega is banned by bsnl in north india don't know why
here is link I have uploaded it to google drive for you
https://drive.google.com/file/d/0B3N06NE5xmsSY0tjV1dMRUdsM3c/view?usp=sharing
Thx buddy
Hi,
I am facing some problems with my cyanogen 12.1 in my redmi 1s.
The last stable update i have is cm-12.1-20151002-UNOFFICIAL-armani.zip
After this i tried cm-12.1-20151129-UNOFFICIAL-armani.zip update and some updates before that. Then i tried the new 13.1 update. Every installation results in boot loop.
So now i installed MIUI7 and i really want to try cyanogen 13.
Anyone faced this problem ? Can anyone suggest a solution
elliot_robot said:
Hi,
I am facing some problems with my cyanogen 12.1 in my redmi 1s.
The last stable update i have is cm-12.1-20151002-UNOFFICIAL-armani.zip
After this i tried cm-12.1-20151129-UNOFFICIAL-armani.zip update and some updates before that. Then i tried the new 13.1 update. Every installation results in boot loop.
So now i installed MIUI7 and i really want to try cyanogen 13.
Anyone faced this problem ? Can anyone suggest a solution
Click to expand...
Click to collapse
Have you flashed the firmware zip from post #3?
I didn't understand. Can you give me the link to post
ok. i downloaded the firmware. why is this file needed? When should i flash this?
elliot_robot said:
ok. i downloaded the firmware. why is this file needed? When should i flash this?
Click to expand...
Click to collapse
It is needed because of the new kernel whick is based on kitkat.
Flash it before or after you flash the rom it doesn't really matter, and you don't need to flash it every time, just once.
Thanks :good:
i am also having same problem plz guid to solve...
cvele992 said:
It is needed because of the new kernel whick is based on kitkat.
Flash it before or after you flash the rom it doesn't really matter, and you don't need to flash it every time, just once.
Click to expand...
Click to collapse
i am also having same problem plz guid to solve...
smartyimrann said:
i am also having same problem plz guid to solve...
Click to expand...
Click to collapse
Everything is written up there, so just read it carefully!
Plz send me the link
Presenting Flyme Os For Honor 5x [All Variants]
Before Asking What is flyme Os and What Features Does it include etc... bla bla bla stuff , to know well about it just Visit This LINK
There is no requirement for Marshmallow as Base. Works on Both Lollipop and Marshmallow:highfive:
THIS MAY ANNOY YOU , BUT IAM SAD TO SAY YOUR FAVOURITE STUFF , FINGERPRINT SENSOR ISNT WORKING IN THIS ROM
So , whats working ?
Everything :highfive:
Any Other Features ?Yes , Emui 4.0 Camera Added and Its working without issues
BUGS ...?
EXCEPT FINGERPRINT , YOU TELL ME whats not working
DOWNLOAD LINK :MEGA MIRROR UPDATE 1
UPDATE 2
UPDATE 3 [24.08.2016]
UPDATE 26.10.2016[NEW]
CHANGELOG:ADDED SETUP WIZARD
NOW U CAN CHANGE LANGUAGE IN THE STARTUP
EMUI CAMERA [ OTHER USERS CAN FLASH IT FROM] HERE
FIXED FORCE CLOSE OF SOME APPS
PREROOTED
FIXED GRAPHICAL ISSUES
BETTER RAM MANAGEMENT AND ADDED BATTERY FRIENDLY TWEAKS
.........................................
SCREENSHOTS :See attactments :highfive:
How to install ?Reboot to Recovery
Wipe System, Data , Cache ,Dalvik-CacheInstall ZipYOU SHOULD NOT FLASH GAPPS ON FIRST BOOT AA LIKE U DID IN CM13 AND OTHER ROMS , FLASH GAPPS ON SECOND BOOT SO THAT EVERYTHING WILL GO FINE RebootFIRST BOOT MAY TAKE UPTO 10 MINS.DONT PANIC,HAVE SOME PATIANCE
Reserved
gopinaidu77 said:
Reserved
Click to expand...
Click to collapse
Good to see a colorful ROM for Honor 5X
This is fantastic! is it unified? For all variants?
Cogra147 said:
This is fantastic! is it unified? For all variants?
Click to expand...
Click to collapse
The tag itself includes all variants .
Even i mentioned in op tooo .
Is there any point in asking again and again ?
gopinaidu77 said:
The tag itself includes all variants .
Even i mentioned in op tooo .
Is there any point in asking again and again ?
Click to expand...
Click to collapse
Sorry. Only quickly glanced at it.
Could any one provide me mirror?
Mega not working foe me even with hola extension :'(
happy3777 said:
Could any one provide me mirror?
Mega not working foe me even with hola extension :'(
Click to expand...
Click to collapse
If flashplayer installed , it works perfect .if not try using mega sync or mega v2 apk from playstore
Thanks. I will give it a try.
HDR is working??
Sent from my KIW-L24 using Tapatalk
I sideloaded it and TWRP warned me no os was installed. Tried again starting again from stock 5.1.1 same thing.
Cogra147 said:
I sideloaded it and TWRP warned me no os was installed. Tried again starting again from stock 5.1.1 same thing.
Click to expand...
Click to collapse
copy the zip to sdcard and flash it
Could any one provide a mirror link?
Spike_M said:
Could any one provide a mirror link?
Click to expand...
Click to collapse
Yes i also need a mirror plz someone give us a mirror :crying:
gopinaidu77 said:
Presenting Flyme Os For Honor 5x [All Variants]
Before Asking What is flyme Os and What Features Does it include etc... bla bla bla stuff , to know well about it just Visit This LINK
There is no requirement for Marshmallow as Base. Works on Both Lollipop and Marshmallow:highfive:
THIS MAY ANNOY YOU , BUT IAM SAD TO SAY YOUR FAVOURITE STUFF , FINGERPRINT SENSOR ISNT WORKING IN THIS ROM
So , whats working ?
Everything :highfive:
Any Other Features ?Yes , Emui 4.0 Camera Added and Its working without issues
BUGS ...?
EXCEPT FINGERPRINT , YOU TELL ME whats not working
CREDITS :MOONLIGHT ,THANK HIM FOR HIS AWSOME JOB(CHINESE FORUM)
DOWNLOAD LINK :MEGA MIRROR
NEW UPDATE
CHANGELOG:ADDED SETUP WIZARD
NOW U CAN CHANGE LANGUAGE IN THE STARTUP
EMUI CAMERA REMOVED , U CAN STILL FLASH IT FROM HERE
FIXED FORCE CLOSE OF SOME APPS
ADDED DOLBY ATMOS
PREROOTED
.........................................
SCREENSHOTS :See attactments :highfive:
How to install ?Reboot to Recovery
Wipe System, Data , Cache ,Dalvik-CacheInstall ZipFlash Gapps RebootFIRST BOOT MAY TAKE UPTO 10 MINS.DONT PANIC,HAVE SOME PATIANCENOTE: IF U ARE ON OLD FLYME BUILD , DIRTY FLASH WORKS AND KEEPS EMUI CAMERA WITH BEAUTIFY OPTION LIVE (IT WIL BE REMOVED ON CLEAN FLASH)
Click to expand...
Click to collapse
I tried flashing it but when i select a launguage it just says setting stopped and i cant go further. cant provide logs since i cant do anything
jimandroidnerd said:
I tried flashing it but when i select a launguage it just says setting stopped and i cant go further. cant provide logs since i cant do anything
Click to expand...
Click to collapse
Is that a clean flash ?
Settings haven't force stopped for me .
After full testing I uploaded the file .
Can u plz explain clearly how u followed each step before flash ?
gopinaidu77 said:
Is that a clean flash ?
Settings haven't force stopped for me .
After full testing I uploaded the file .
Can u plz explain clearly how u followed each step before flash ?
Click to expand...
Click to collapse
I just wipe system, cache and dalvik and data. I flash the ROM with micro gapps and then it boots, takes a while like you said, then I can select laungauge and I first pressed Netherlands because I live there, after that it said the settings had stopped I thought my laungauge maybe wasn't supported so i tried English (american) it still crashed, then I tried the Chinese one, and it still crashed, I thought I did something wrong so I clean flashed the ROM again and just tried the Chinese one. Crash, tried the English one, crash. I really hope you find a way to fix this, this ROM looks very cool.
Cheers
jimandroidnerd said:
I just wipe system, cache and dalvik and data. I flash the ROM with micro gapps and then it boots, takes a while like you said, then I can select laungauge and I first pressed Netherlands because I live there, after that it said the settings had stopped I thought my laungauge maybe wasn't supported so i tried English (american) it still crashed, then I tried the Chinese one, and it still crashed, I thought I did something wrong so I clean flashed the ROM again and just tried the Chinese one. Crash, tried the English one, crash. I really hope you find a way to fix this, this ROM looks very cool.
Cheers
Click to expand...
Click to collapse
Am sorry , can u try to flash the ROM first and flash gapps on second boot .
Make a clean flash if ROM only , no gapps on first boot .
It may be the problem with setup wizard .
Try without gapps and feedback plz
Ok i have test it on kiw l21 is woks fine but it has some bugs no sound and external sd is not shown everything els was fine
stolenprecious said:
Ok i have test it on kiw l21 is woks fine but it has some bugs no sound and external sd is not shown everything els was fine
Click to expand...
Click to collapse
Sound is working bro , m using this ROM as daily drive . which one did u flashed ?
First one or the update ?
By flashing a custom rom, your warranty is void 0ooh wait its void the moment you unlock bootloader.
FOLLOW INSTRUCTIONS!!! to avoid bricked devices. ask where need be!.
Not the best tab (i mean performance wise is almost pathetic), but hey!! i mean i searched for custom roms but couldnt find-the stock lagged with install of just two to three apps. Didnt like the look too. I have managed to port 2 roms for our beloved TAB.
LINKS BEFORE CREDITS!
PORTED
1= FLYME OS 6.7 based on LENOVO K4 NOTE concept
2= LINEAGE OS 7.1.1 (currently using) based on Allview V2_Viper
PREPARE TAB FOR CUSTOM ROMS
as always;
UNLOCK BOOTLOADER first (fastboot oem unlock)
FLASH TWRP by 0xAF (fastboot flash recovery ******)
***make a full backup of stock before flash
clear data/system etc before flash
then FLASH AWAY.. clear cache after. (reboot; DONE...)
As ABRHAM BEBH says; there is no ported ROM without BUGS; suprisingly i only detected a few bugs (major)
FLYME bugs..
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
***these were the only bugs present after port
LINEAGE
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
***these were the only bugs present after port
I Manage to fix a few in both ROMS;
FLYME
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
LINEAGE
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
These ROMS have been ported from 6753 chipset..if that will come in handy to fix camera
i was hoping i could make this thread after i have fixed all bugs, but nahh!! i think i have tried enough and i will need help to fix remaining BUGS
******I can NO LONGER OFFER fixs..as I gave away the TAB..
***the ROMS are coming with PATCHES to fix mentioned fixed bugs..
the only payment i want is HIT the LIKE button,, come on!!:good:
LINKS
Find TWRP from 0xAF thread.. THANK him too for his recovery, thats why i havent posted the direct link to recovery https://forum.xda-developers.com/general/rooting-roms/recovery-twrp-3-0-2-lenovo-tab3-7-tb3-t3468589
My SP FLASHTOOL flashable stock 6.0 firmware https://mega.nz/#!h0cESAxY!ZOZRDxtryIB8IETJ3TTMh9_o67MucHz6GvyKxsYMbg0 (in case you mess up or want to revert to stock)
*** CERTIFICATE for USE with SP FLASHTOOL
https://forum.xda-developers.com/general/rooting-roms/sp-flashtool-authentication-file-t3613145
TWRP 3.1.1 by ME **report any bug https://mega.nz/#!RtUU3BjL!Gt2G9c7N7VLWbDjMGd9AlESJjIxa5a0_4eK9PLDADlU
ROMS uploaded
LINKS READY-
FLYME 6.0
ROM
https://mega.nz/#!I5VzyCgY!oDyo6BBp0v_sllku8tkZu6iOIxhQEXWhlIdSsmJw75I
PATCH FLYME FIX
https://mega.nz/#!lhUygbQJ!C81dWZDaal4EjucR0jw8zED4DdLWwY2LvX7lZIPpJfs
LINEAGE 14
ROM
https://mega.nz/#!J4cTiYIQ!J35IQp_KMjSUnmztZiEDnc8PVxyIpdC1HVBTJvHZFFU
LINEAGE custom boot (NEW)..!
https://mega.nz/#!JwsTmaQA!jlW7L5AGkGZ1BQ66_lH7XHEqnG3cEHQ0IiWpssgSKBU
*Flash to fix error.. give feedback if it works (no longer have the tab to test)....++this fixes boot failure
PATCH LINEAGE FIX
https://mega.nz/#!JkdVWITA!Sv7YaXaGb-JWh71j-JZFYndN_zG9cSE0fzb4Yynf1ss
...thank you
Try and give feed back..
check screenshots of LINEAGE 14 on ATTACHMENTS
CREDITS
Amit Kumar=Gionee F103pro
Iacob Ionut
0xAF
ABRHAM BEBH
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Lenovo TAB3 7 TB3-730X is slow & Lagging
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Pendik85 said:
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Click to expand...
Click to collapse
Both roms are very smooth.. but have some bugs that need fixing
0xAF said:
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Click to expand...
Click to collapse
Sure...
dmilz said:
Sure...
Click to expand...
Click to collapse
Do you have any download links?
0xAF said:
Do you have any download links?
Click to expand...
Click to collapse
uploading right now... Will post links later
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
can you send the links of the ported roms?
is there a chance to work on tb3-710i ?
thx
sfvam said:
is there a chance to work on tb3-710i ?
thx
Click to expand...
Click to collapse
I doubt.. don't try unless you can escape a bootloop worse a brick
MakedoSan said:
can you send the links of the ported roms?
Click to expand...
Click to collapse
Links ready
Download and flash away
Demetris said:
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
Click to expand...
Click to collapse
Good news ey.. probably one with no bugs will be coming about soon.
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
nix9756 said:
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
Click to expand...
Click to collapse
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
Issue noted.. download the modded boot image in op (just added) .flash it after room install.. then reboot to system..
Give me feedback after
Kellicros said:
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
Click to expand...
Click to collapse
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
dmilz said:
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
Click to expand...
Click to collapse
Already did, too bad you don't have the tab to work on this anymore.
Kellicros said:
Already did, too bad you don't have the tab to work on this anymore.
Click to expand...
Click to collapse
Yeah its sad..Has is worked with the new boot.img?
flyme os is a rom which is based on cm . great battery saving rom.
works perfectly . one problem is of dialer when you insert sim card dialer force stop but you can download another dialer from play store
simple download rom and do factory reset using twrp
and flash such rom then reboot after it go again in recovery and then flash gapps
i am not developer of such rom
found link for those who need best battery and performance
https://androidfilehost.com/?fid=24659351692116084
or use link
https://forum.xda-developers.com/galaxy-s3-neo/development/flyme-os-siii-neo-siii-neo-duos-t3476018
hit thanks if i helped you
LOL
That rom has bugs, is outdated and abandoned.:laugh: PS: Easy with the "hit thanks if i helped you" spam.
bro i am using such rom i donot see any of bugs yes dialer problem is present
actually designed for grand 2 modified for s3 neo .if u are getting bugs may be wrong flashing done by you
haider123 said:
flyme os is a rom which is based on cm . great battery saving rom.
works perfectly . one problem is of dialer when you insert sim card dialer force stop but you can download another dialer from play store
simple download rom and do factory reset using twrp
and flash such rom then reboot after it go again in recovery and then flash gapps
i am not developer of such rom
found link for those who need best battery and performance
https://androidfilehost.com/?fid=24659351692116084
or use link
https://forum.xda-developers.com/galaxy-s3-neo/development/flyme-os-siii-neo-siii-neo-duos-t3476018
hit thanks if i helped you
Click to expand...
Click to collapse
What does not work for this Rom
arbercocka said:
What does not work for this Rom
Click to expand...
Click to collapse
for me on i9300i working perfectly without any single fault yes one bug for me which is dialer problem i mentioned in post you can download any other dialer from play store
haider123 said:
for me on i9300i working perfectly without any single fault yes one bug for me which is dialer problem i mentioned in post you can download any other dialer from play store
Click to expand...
Click to collapse
hi, how about sim cards, ril is it working on second sim card or not (known bug on cm12.1)
This rom is full of bugs and incomplete if u read the op and comments on the original thread u would understand. As for the OP of this thread don't try to get the thanks for reposting something that already exists and isn't bug free.
MrGallant said:
This rom is full of bugs and incomplete if u read the op and comments on the original thread u would understand. As for the OP of this thread don't try to get the thanks for reposting something that already exists and isn't bug free.
Click to expand...
Click to collapse
fully tested by me i got on my i9300i only two bugs which i listed dialer problem i also suggested also moreover video recording is not working but other thing on my device working perfectly i just wanted to help you guys yes some get camera error due to hardware problem
semcem said:
hi, how about sim cards, ril is it working on second sim card or not (known bug on cm12.1)
Click to expand...
Click to collapse
yes same as cm12.1 meziu flyme os based on cm 12.1 made for grand 2 also ported to s3 neo