By request, I have made my own LineageOS 13.0 thread. I will work on this when I have time during the evenings and after work.
Thanks
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
@Valera1978 - Setting up the initial build and getting it to device work
@deadman96385 - For continuous support on helping me make a better ROM
@ZakooZ and @javelinanddart - For helping me fix the Camera
@deadman96385 and @javelinanddart - For helping me fix the IR blaster
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
Instructions
1. Install custom recovery Link
1.*I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. The rom will need to allow v1awifi naming for flashing in recovery. Link
2. Download the zip(s) - ROM and Google Apps additional package (optional)
3. Backup all partitions in TWRP - this will be your recovery point if things don't install correctly.
4. Full wipe all
5. Flash ROM
6. Flash GApps
Note: Please make sure you have a Lollipop bootloader. Below are the steps to flash it.
Known Issues
Lower than stock audio volumes
MHL out to TV not working
Nightlies
Latest Nightly Date: 12/23/16
Device Builds
GApps
http://opengapps.org/
Platform: ARM
Android: 6.0
Bootloader Information
You need to make sure you have a lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You’ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar.md5 file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Sources
In the readme file (see device tree) all instructions for build.
LineageOS: https://github.com/LineageOS/
Device: https://github.com/exynos5420/android_device_samsung_v1awifi
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Vendor: https://github.com/exynos5420/proprietary_vendor_samsung
Over clock?
Hi Thom,
want to know if you are able to make this kernel ready for over clock. Further I use Valera s 5.11, which one is faster this or Valera's 5.11. I know that marshmallow are in generally slower then 5.11 so will it make sense to change. I have some applications + movies which do not play/work fine, need a little more performance in GPU and cpu.
Thanks for supporting this device, I love this tablet
Deltabravofoxotango said:
Hi Thom,
want to know if you are able to make this kernel ready for over clock. Further I use Valera s 5.11, which one is faster this or Valera's 5.11. I know that marshmallow are in generally slower then 5.11 so will it make sense to change. I have some applications + movies which do not play/work fine, need a little more performance in GPU and cpu.
Thanks for supporting this device, I love this tablet
Click to expand...
Click to collapse
This rom is really fast. Like faster than 5.1.1. I am still making changes and it is speeding up by the day. I would almost say it is stable and fast enough for videos and apps that you trying to run. Try tonight's nightly and give it a shot and let me know what your thoughts are.
Yes, I was hoping there's a list of launchers compatible with CyanogenMod. I always used Nova Launcher pre-root, but post-root post-adding CM, it crashes constantly to the point of unusability. But I'm not fond of the default launchers included so as I said, I was hoping there's a list somewhere. Thanks.
Thank you for the ROM. YouTube and .gif files aren't working properly in the latest nightly. Used Micro Gapp install. Also web pages very laggy, especially ones that contain a lot of ads.
Just thought I'd report that I installed the latest (4/26) over the top of the earlier april version via a "dirty" install (no wipe). Also installed the latest open gapps stock version with no error message after reboot. That's it so far...
ElsaReyes said:
Yes, I was hoping there's a list of launchers compatible with CyanogenMod. I always used Nova Launcher pre-root, but post-root post-adding CM, it crashes constantly to the point of unusability. But I'm not fond of the default launchers included so as I said, I was hoping there's a list somewhere. Thanks.
Click to expand...
Click to collapse
What device are you on? All these problems you have is not normal. Sure you're on the P900 wifi? I haven't come across one single app ,including launchers, that don't work with this ROM.
i have a problem for downloading the latest build. The link in this forum give me only 3 old builds of the rom. When i use the old link from the old post i can download the 26 apr build. I have downlaoded that one (is the same?) and installed it with latest gaps and so problems so far
thompatry said:
This rom is really fast. Like faster than 5.1.1. I am still making changes and it is speeding up by the day. I would almost say it is stable and fast enough for videos and apps that you trying to run. Try tonight's nightly and give it a shot and let me know what your thoughts are.
Click to expand...
Click to collapse
It's a completely new ROM @thompatry Much snappier and very smooth. No prob with new Gapps and setup wizard. All in all a very promising ROM. Thanks a million!
Hi I installed your latest cm 13 on my sm-p901 and it's very smooth and fast ! Thanks so much ! But I have problem with sound ! When I change the volume with up/down key , tablet freezes for a sec or when I go to settings-sound , tablet freezes, keyboard kepress sound has latency for example , what's wrong with sound ?! Thanks so much again for bringing MM to exynos variant! ?
Edit : I can't play audio files too !! What could it be related to ?? Gapps maybe?! Does anybody else have audio problem?!
Sent from my Nexus 5X using Tapatalk
thools60 said:
What device are you on? All these problems you have is not normal. Sure you're on the P900 wifi? I haven't come across one single app ,including launchers, that don't work with this ROM.
Click to expand...
Click to collapse
Yep, P900 wifi.
It's not the app though, or the rom, or any of that. It's me, technology has always and will always take a sick ammount of pleasure in royally screwing me over in all things everyone else manages perfectly fine.
But if it's me, even if I do exactly as everyone else does, the computer will probably explode in my face.
ElsaReyes said:
Yep, P900 wifi.
It's not the app though, or the rom, or any of that. It's me, technology has always and will always take a sick ammount of pleasure in royally screwing me over in all things everyone else manages perfectly fine.
But if it's me, even if I do exactly as everyone else does, the computer will probably explode in my face.
Click to expand...
Click to collapse
Did you wipe everything clean before you installed?
thools60 said:
Did you wipe everything clean before you installed?
Click to expand...
Click to collapse
Not the files. But Factory Reset, Wipe - Davik, Cache, System, whatever that fourth one listed was called.
ElsaReyes said:
Not the files. But Factory Reset, Wipe - Davik, Cache, System, whatever that fourth one listed was called.
Click to expand...
Click to collapse
Can you save you files on a flash or something?
thools60 said:
Can you save you files on a flash or something?
Click to expand...
Click to collapse
Yeah, but would that even make any difference? It takes like 10 hours to get everything back on, transfers slow, and I'd rather avoid that if this might not even work.
ElsaReyes said:
Yeah, but would that even make any difference? It takes like 10 hours to get everything back on, transfers slow, and I'd rather avoid that if this might not even work.
Click to expand...
Click to collapse
Well, if your device isn't broken in some way, I guess thats the only way to fix it.... You haven't thought about keeping your files in the cloud? 100gb Storage on Google drive is about 2 bucks a month
Anyone managed to get xposed to work? I tried a lot of builds of the app and of the binairy, but every time I open xposed and I click on something, I get a black screen and I need to restart to get my tablet working again.
The new version is very fast. I am, however, having issues with Chrome playing back media (video) and in fact while using youtube got an error message that Android was having trouble playing media. Sometimes it will play video... but often it will not.
Anyone else having that issue, or should I wipe this baby and do a clean install?
shonkin said:
The new version is very fast. I am, however, having issues with Chrome playing back media (video) and in fact while using youtube got an error message that Android was having trouble playing media. Sometimes it will play video... but often it will not.
Anyone else having that issue, or should I wipe this baby and do a clean install?
Click to expand...
Click to collapse
Same here. It's the same issue with play music. Tried everything. Clean install. Full Gapps and second time Pico Gapps and downloaded Play music from Play store. And no go. Installed older build and voila, works again. Must be ROM related.
shonkin said:
The new version is very fast. I am, however, having issues with Chrome playing back media (video) and in fact while using youtube got an error message that Android was having trouble playing media. Sometimes it will play video... but often it will not.
Anyone else having that issue, or should I wipe this baby and do a clean install?
Click to expand...
Click to collapse
thools60 said:
Same here. It's the same issue with play music. Tried everything. Clean install. Full Gapps and second time Pico Gapps and downloaded Play music from Play store. And no go. Installed older build and voila, works again. Must be ROM related.
Click to expand...
Click to collapse
I have problem with sounds too , for example when you go to settings - sound , tablet freezes for a sec , or I can't play music , there is a problem with media !
Sent from my Nexus 5X using Tapatalk
Related
Please discuss all CM11 related items here until we get official nighties / another thread from shellnut. Here I will link what we have so far.
******Backup EFS partitions using recovery/freegee!******
---------------
You need the latest clockworkmod recovery. Use Flashify from the Play store to flash. Be sure to READ the installation instructions.
---------------
Download Area. Do NOT forget to read installation instructions:
Clockworkmod Recovery Image (Go to page 4): Clockworkmod Latest Recovery! Click Me!
Flashify: Flashify Play Store Link. Click me!
Downloads (Unofficial from Shellnutt2): Shellnutt2 Unofficial CM11. Click me!
New Official updates; download.cyanogenmod.org
choose LS970
Gapps (Choose CM11): CM 11 Gapps. Click Me!
-----------------------------------------
Working:
Phone Calls
SMS/MMS
Camera (Autofocus Too!) (Camera is only 8 Megapixels though.)
UI
Pretty much everything
Bugs known so far: WiFi is hit or miss. Some people has it working, some do not.
Extra info:
To install, Do the normal.
1. Place Rom/Right Gapps on internal storage
2. Download recovery from link.
3. Use Flashify to flash the new recovery
4. Be sure to backup everything important to you.
5. Did you backup? Good.
6. Backup EFS partitions using recovery/freegee!
7. Wipe normal as you would. Be sure to not wipe internal storage. Wiping system may or may not help.
8. Install rom/gapps
9. Profit. Have fun!
MikeEx Posted:
Shellnut2 has said that we are slated to go for nighties when they officially start.
If your WiFi is giving you "Association rejected" please hop on IRC and get some logcats to Shellnut2
Server: irc.freenode.net
Channel: #lg-optimus-g
Click to expand...
Click to collapse
Also, how to use ART
MikeEx Posted (Couldn't quote or it wouldn't show red on XDA app):
Remove your phone from any case and place in front of a fan where the top front and back receive air flow.
The phone will get extremely hot (80*C+) if left uncooled while ART compiles everything. This could be a total brick hazard.
Having around 200 apps could take well over 10 minutes.
ART will recompile every time you flash a new nightly.
-----------------------
Disclaimer!
No on here takes responsibilty for anything YOU do to YOUR phone. You can not blame us for anything that happens.
---------------------------
All credit here go to its respective Builders/Complilers/Owners. I am merely providing links until official support is given.
Do I have to use CWM to flash this? Has anybody used flashify on our phone? How's Wi-Fi? I'm full of Qs but I'm dying to run a 4.4 that isn't from mako sources.
HdMsTrTeCh said:
Do I have to use CWM to flash this? Has anybody used flashify on our phone? How's Wi-Fi? I'm full of Qs but I'm dying to run a 4.4 that isn't from mako sources.
Click to expand...
Click to collapse
Use CWM, I believe there's an updated version that someone built (it's in the cwm recovery thread towards the last couple pages). Flashify works on LGOG as that's what I used to flash the cwm touch img file. Wifi works on my end. I flashed the 11/30 build and then dirty flashed 12/03 build.
I realize this is probably buggy but is it worth the switch from 10.2 to use as a dd? What if I want to go back? All my backups are TWRP
Use online nandroid backup to make a CWM backup without CWM
Here: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup
Sent from my Bangin' LS970 on who knows what ROM
HdMsTrTeCh said:
Do I have to use CWM to flash this? Has anybody used flashify on our phone? How's Wi-Fi? I'm full of Qs but I'm dying to run a 4.4 that isn't from mako sources.
Click to expand...
Click to collapse
WiFi is hit or miss for certain people. You must use clockworkmod recovery. I will add links to op here in a min. I use flashify and it worked just fine.
-Whiplashh
"I think a ducks opinion of me is heavily influenced by whether I have bread or not."
Shellnut2 has said that we are slated to go for nighties when they officially start.
If your WiFi is giving you "Association rejected" please hop on IRC and get some logcats to Shellnut2
Server: irc.freenode.net
Channel: #lg-optimus-g
Links up. Thread cleaned up. Have fun.
jblazea50 said:
Use CWM, I believe there's an updated version that someone built (it's in the cwm recovery thread towards the last couple pages). Flashify works on LGOG as that's what I used to flash the cwm touch img file. Wifi works on my end. I flashed the 11/30 build and then dirty flashed 12/03 build.
Click to expand...
Click to collapse
Linked recovery in OP
-Whiplashh
"I think a ducks opinion of me is heavily influenced by whether I have bread or not."
Whiplashh said:
.
Click to expand...
Click to collapse
Hey add a warning to OP for using ART. Red bold letters. something like:
Remove your phone from any case and place in front of a fan where the top front and back receive air flow.
The phone will get extremely hot (80*C+) if left uncooled while ART compiles everything. This could be a total brick hazard.
Having around 200 apps could take well over 10 minutes.
ART will recompile every time you flash a new nightly.
Wifi works fine for me at home but at work it will not connect.
Sent from my LG-LS970 using Tapatalk
Basically everything worked for me except video recording and playback. Try recording a video in snapchat and see what happens.
That said, the camera works better than on the other 4.4 ROMs. No autofocus issues and no weird coloration issues, no capture rate issues either.
MikeEx said:
Hey add a warning to OP for using ART. Red bold letters. something like:
Remove your phone from any case and place in front of a fan where the top front and back receive air flow.
The phone will get extremely hot (80*C+) if left uncooled while ART compiles everything. This could be a total brick hazard.
Having around 200 apps could take well over 10 minutes.
ART will recompile every time you flash a new nightly.
Click to expand...
Click to collapse
Added it. Will add red letters tomorrow.
-Whiplashh
"I think a ducks opinion of me is heavily influenced by whether I have bread or not."
Fresh bacon up!
Sent from my LG-LS970 using Tapatalk
---------- Post added at 10:29 AM ---------- Previous post was at 09:34 AM ----------
Still can't connect to my work wifi after a dirty flash. Going to try clean here in a minute. Strange though how I can connect to some routers but not others.... They are both WPA security
Sent from my LG-LS970 using Tapatalk
Ran the 12/3 build all night last night - dirty flashed up from the latest 10.2 build just for kicks.
Initial boot the OS was just crawling (likely dirty flash issue) - 2nd boot brought everything back to life and been fine since.
Not running ART just yet - need to verify and trim down my 200 app list lol (plus I don't want to lose Xposed just yet)
3G/4G both work great
Wifi worked fine at 3 different locations
GPS worked great
Auto Focus of course works fine
USB Tether works (woot!) and no long kills my phones USB connection when un-tethering (double woot!)
BT worked fine
NFC Works
Audio book played without any audio distortions/glitches (issue in another KK rom)
Google Nav/Maps is still using the wrong voice - an issue I had in the 10.2 build which may have carried over due to dirty flashing. The other KK rom I use uses the correct voice.
Using the PA Gapps Mini-Mod package
Had to reset my battery meter setting since the 10.2 option doesn't exist (yet) in 11 - had me confused for a bit since I had >no< battery meter lol
Aside from having to use CWM, this is pretty dang slick so far.
has the updater been implemented? The one really cool thing I liked about CM
What is ART? Is it optional?
Here's the CWM -6.0.4.5.zip file for the LS970, Uploaded by shellnut
http://www.4shared.com/zip/jULzGS4j/cwm-6045-ls970.html
Here's the stock LG Optimus G camera zip (For AOSP/CM)
http://www.4shared.com/zip/6UeG0pi_/CamCM1018030.html
MMS zip
http://www.4shared.com/zip/ZMj_Eds5/Mms.html
Everything works great, even auto focus.
Today is my birthday, and I flashed my 12/5 birthday build, I couldn't be happier
MikeEx said:
Hey add a warning to OP for using ART. Red bold letters. something like:
Remove your phone from any case and place in front of a fan where the top front and back receive air flow.
The phone will get extremely hot (80*C+) if left uncooled while ART compiles everything. This could be a total brick hazard.
Having around 200 apps could take well over 10 minutes.
ART will recompile every time you flash a new nightly.
Click to expand...
Click to collapse
i've never had these issues myself, but i can see why they would arise. i think a warning or piece of advice should be mentioned stating that if someone plans on using ART, they should enable it immediately upon rom installation, before other apps are installed. that way, optimization isn't as tedious of a process
Derp
Q&A for [ROM][UNOFFICIAL] CyanogenMod 11 Nightlies / Releases [M11]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
my desire hd cant boot when i swich to ART mode
Mustaavalkosta said:
General:
These are UNOFFICIAL CM11.0 Kitkat Nightlies / Releases brought to you by AceEnablementProject and TeamCodefire as a continuum to CM10 and 10.1 nightlies. Builds are generated automatically each night. Process starts around 00:30 PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Latest 12 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
AceEnablementProject
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download Nightlies / Releases [BasketBuild mirror]
Download gapps from here. Pico/Nano/Micro recommended, Mini/Full/Stock doesn't fit in our system partition after the ROM has been installed.
Put the files on SD card.
Reboot to recovery.
Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-11-YYYYMMDD-UNOFFICIAL-ace.zip
Flash gapps zip
Remember to reflash boot.img via fastboot if you are HTCDev unlocked.
Reboot and enjoy.
Update instructions:
Download Nightlies / Releases [BasketBuild mirror]
Put the file on SD card.
Reboot to recovery.
Flash cm-11-YYYYMMDD-UNOFFICIAL-ace.zip
Remember to reflash boot.img via fastboot if you are HTCDev unlocked.
No need to flash gapps as CM backuptool script should take care of them. (Results may vary depending on which gapps package you are using.)
Reboot and enjoy.
InspireMod
http://downloads.codefi.re/mustaavalkosta/inspiremod
Kernel
Source: github
Compiler: stock AOSP gcc-4.7
Branch: cm-11.0
Kernel Version: 3.0.101
defconfig: spade_defconfig
Contact:
My Google+
My twitter
#codefireX @ freenode
Donations:
For hosting: codefi.re (use the donation button at the bottom of the page)
I don't really need your money right now but if you insist on donating to me I suggest you donate that money to EFF instead here: https://supporters.eff.org/donate
Q&A:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
A: Update your recovery to one that is compatible with new recovery functions. See the list below.
4EXT Recovery Touch v1.0.0.6 RC 3 or newer
CWM 6.0.4.8 Advanced Edition / PhilZ Touch 6.29.8 or newer
TWRP 2.7.1.0 ACE or newer
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM11.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm11
cd cm11/
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
mkdir -p .repo/local_manifests
wget https://github.com/AceEnablementProject/android/raw/cm-11.0/local_manifest.xml -O .repo/local_manifests/cm_ace.xml
repo sync
cd vendor/cm/
./get-prebuilts
cd ../../
. build/envsetup.sh
lunch cm_ace-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/ace/ directory.
Q: Something about something something something.
A: Ask the guy/gal next to you.
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 11 Nightlies / Releases [M11], ROM for the HTC Desire HD
Contributors
Mustaavalkosta, paulb_nl
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: M11
Beta Release Date: 2014-10-08
Created 2014-04-11
Last Updated 2014-10-09
Click to expand...
Click to collapse
some saids it`s because the partition of cache is too small
CM11 latest release freezes after first reboot
GD to all. I am trying to install CM11 latest release, first time starts ok, but after reboot it doesn't start, freezes with black screen before bootanimation. Tried to flash boot.img via ADB & also tried to install CM 10.1 SR3, nothing helped, same situation. Waiting for your replies. Thx in advance.
Hey!
Would it be possible to you to add gpu overclock to that kernel?
Thx
Question about bugfixes
Hi,
at the moment i have M10 installed but i want to ask if there is a fix in M11 included which fixes sudden restarts.
My DHD restarts over night or when i want to something (it doesnt depends on what i am doing).
And another Problem sometimes the screen wont turn on when pressing the power button only the menu keys lighten up.
And i think it is more like off topic but how i can unlock the phone that i do not need to flash boot.img it is at the moment only HTC-Unlocked.
And very much thanks for this ROM it is great!
Thanks in advance for your answers
ag1707
Cannot dirty flash Nightlies
Hi
Since sometime around M11 release, I can not dirty flash nightlies on nightlies. The phone stuck at booting with the message "Android is upgrading / Finishing boot".
I'm using TWRP 2.7.1.0 for recovery.
1. Install Rom
2. Wipe Cache/Dalvik (I've tried without wipe too)
3. Reboot System
Am I missing something here?
I'm using non-English locale. Could it be the reason?
Best Regards,
Solved
Nanashi_anon said:
Hi
Since sometime around M11 release, I can not dirty flash nightlies on nightlies. The phone stuck at booting with the message "Android is upgrading / Finishing boot".
I'm using TWRP 2.7.1.0 for recovery.
1. Install Rom
2. Wipe Cache/Dalvik (I've tried without wipe too)
3. Reboot System
Am I missing something here?
I'm using non-English locale. Could it be the reason?
Best Regards,
Click to expand...
Click to collapse
Just figured it out that PA_GAPPS requires flash every update for recent ROMs.
Hi and thx for your rom!
I flashed the cm-11-20141008-UNOFFICIAL-M11-ace from releases, using twrp 2.7.1.0 for the recovery on a HTC Desire HD.
I am experiencing some lag when opening the screen or starting apps / widgets. It can take be almost instant up to 3-5 sec for the app to launch and be accessible (camera, gallery, weather, settings, mail anything really).
Also once in a while parts of the text in the screen get deformed (example here), any action by me (moving my finger around) or by the OS (some notification) fixes it.
As far as I can tell I followed your instructions properly. Is there anything I could try?
XZelin said:
some saids it`s because the partition of cache is too small
Click to expand...
Click to collapse
Possibly. There are some posts about this from paulb_nl on the main thread but I didn't find them right now. They are there though.
sky141 said:
GD to all. I am trying to install CM11 latest release, first time starts ok, but after reboot it doesn't start, freezes with black screen before bootanimation. Tried to flash boot.img via ADB & also tried to install CM 10.1 SR3, nothing helped, same situation. Waiting for your replies. Thx in advance.
Click to expand...
Click to collapse
Are you using the latest recoveries mentioned in the first post's Q&A section in the development thread? If your issue is what I think it is, full wipe with the previously mentioned recoveries should fix it.
_Bon_Bon said:
Hey!
Would it be possible to you to add gpu overclock to that kernel?
Thx
Click to expand...
Click to collapse
Is there working GPU OC for ace? I thought it was hardware locked thus can't be overclocked via software.
ag1707 said:
Hi,
at the moment i have M10 installed but i want to ask if there is a fix in M11 included which fixes sudden restarts.
My DHD restarts over night or when i want to something (it doesnt depends on what i am doing).
And another Problem sometimes the screen wont turn on when pressing the power button only the menu keys lighten up.
Click to expand...
Click to collapse
I haven't heard any complaints about frequent reboots. I know that there are those but it's been said to happen like once a week or so. M11 may change something if your issues come from corrupted devlog partition but if it's something else, then M11 won't do anything for your reboot issue.
Nihim said:
Hi and thx for your rom!
I flashed the cm-11-20141008-UNOFFICIAL-M11-ace from releases, using twrp 2.7.1.0 for the recovery on a HTC Desire HD.
I am experiencing some lag when opening the screen or starting apps / widgets. It can take be almost instant up to 3-5 sec for the app to launch and be accessible (camera, gallery, weather, settings, mail anything really).
Also once in a while parts of the text in the screen get deformed (example here), any action by me (moving my finger around) or by the OS (some notification) fixes it.
As far as I can tell I followed your instructions properly. Is there anything I could try?
Click to expand...
Click to collapse
It's a bit slow but I suppose that's understandable considering we are talking about 4 year old device. People have reported it gets slower the more apps you install. I'm not sure why.
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Mustaavalkosta said:
It's a bit slow but I suppose that's understandable considering we are talking about 4 year old device. People have reported it gets slower the more apps you install. I'm not sure why.
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Click to expand...
Click to collapse
Yea that is very much true, this might sound bad but would is there some other version you would recommend (even if it's a previous android release) which would be snappier? (your ROM so far is absolutely fine outside of that lag which as you stated is probably because DHDs hardware can't handle it).
As for that graphics glitch can't think of something, any apps were installed from play store (not restored by titanium for example) it happens on different ones but a lot more often on k-9 email client (from which the screenshot is).
If there is something that you would like me to try, feel free to tell me, though any action on the screen restores it to its normal way.
Nihim said:
Yea that is very much true, this might sound bad but would is there some other version you would recommend (even if it's a previous android release) which would be snappier? (your ROM so far is absolutely fine outside of that lag which as you stated is probably because DHDs hardware can't handle it).
As for that graphics glitch can't think of something, any apps were installed from play store (not restored by titanium for example) it happens on different ones but a lot more often on k-9 email client (from which the screenshot is).
If there is something that you would like me to try, feel free to tell me, though any action on the screen restores it to its normal way.
Click to expand...
Click to collapse
I don't mind people looking for better solution for their needs. You may want to try my CM10.1 builds which were noticeably faster if I recall correctly. I haven't been using other ROMs that much during the time I've kept my own stuff going here so I can't really recommend anything else. A fellow user may be a bit less biased to recommend other options.
I'll see if I can catch that graphical glitch with K-9 myself. Thanks for reporting it!
Mustaavalkosta said:
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Click to expand...
Click to collapse
I get that black boxes glitch with the standard Email app all the time. They usually go away in less than a second. I also checked for those when I was testing the 4.4 adreno drivers and it was still not fixed.
paulb_nl said:
I get that black boxes glitch with the standard Email app all the time. They usually go away in less than a second. I also checked for those when I was testing the 4.4 adreno drivers and it was still not fixed.
Click to expand...
Click to collapse
Oh ok. If it has been mentioned in the development thread, I've just probably forgotten about it.
Mustaavalkosta said:
I don't mind people looking for better solution for their needs. You may want to try my CM10.1 builds which were noticeably faster if I recall correctly.
Click to expand...
Click to collapse
Thanks! What would be the proper way to backup the whole "phone" so I can switch back and forth between roms? Atm I 'm only backing up apps & data with titanium.
Nihim said:
Thanks! What would be the proper way to backup the whole "phone" so I can switch back and forth between roms? Atm I 'm only backing up apps & data with titanium.
Click to expand...
Click to collapse
Doing a backup in recovery should be sufficient to backup everything except sdcard.
Mustaavalkosta said:
Are you using the latest recoveries mentioned in the first post's Q&A section in the development thread? If your issue is what I think it is, full wipe with the previously mentioned recoveries should fix it.
Click to expand...
Click to collapse
Thx 4 yours above. I'm using latest 4ext recovery touch + full wipe, of course. Will try to do something with partition.
Update from M11 to Nightly
It is possible to flash the newest nightly over the M11 release?
Or I need a full wipe.
Christian1987 said:
It is possible to flash the newest nightly over the M11 release?
Or I need a full wipe.
Click to expand...
Click to collapse
Well, generally it's recommended to wipe if you switch from one to another but it may work in this case without wiping. Make a nandroid backup and try it.
My battery dies really fast. Do you guys have a recommendation in terms of which battery to get? Link it here. Thanks.
prufessor_oak said:
My battery dies really fast. Do you guys have a recommendation in terms of which battery to get? Link it here. Thanks.
Click to expand...
Click to collapse
You can get original Desire HD battery on ebay cheaply, no point looking at other batteries which cost almost the same. Just look for one in your region.
Install Wakelock Detector from the Play store and find out what is causing your battery drain. Depending on phone use it should be able to last all day, 2 days if just left on standby all the time. Screen on all the time will be around 3-4 hours.
Q&A for [ROM][L900] Cyanogenmod 12.0 [12/14/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][L900] Cyanogenmod 12.0 [12/14/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
keyboard ?
works Good to what i see but there's no keyboard . Any fix for that ?
Working great no issues with phone, gps or camera. Great job and I look forward to the updates. Seems great so far.
Thanks
I just installed the new build I am only wondering how do I turn off my mobile data. This ROM is amazing and everything works except for data turning off and front camera
Battery Life
When i flashed this rom onto my device, i noticed a significant drop in battery life. Has anyone else noticed this and is there a fix for this?
thnx
Thank you sooooooooooo much man ,,, its sooooooo cooool ROM
working Perfectly on my sprint Note 2 SPH-L900
camera works fine ,,, everything is cool ,,, downloading now gapps
So I'm relatively new to the forums, I mostly just read, learn and try to stay out of way. Just flashed latest nightly last night. So far very smooth and stable. I did some poking a prodding this morning to answer some questions I had coming from CM11 which I was also new to.
Nice to see Sprint carrier billing back in this version. I know I saw it posted that NFC was not working but everything but Tap & Pay seems to work fine for me. Beam and Tags all function okay.
On top of Netflix not working yet, Play Movies 3.6.16 FCs on launch and after reverting to 3.4.23 it waits until you press play to FC.
I did have the keyboard issue that has been mentioned but was prepared with SwiftKey apk on my sdcard just in case. After finishing setup ALL keyboards seem to function just fine.
BT and GPS both working great.
All in all very usable and I'm going to give it a go as a daily for as long as possible though I may have to revert back to CM11 just for the Netflix/Play Movies since we only stream in my household. We'll see.
Not sure if this thread was the best place to share (I can't seem to comment on the main thread) but if there's a more appropriate place to provide feedback that someone wants to point me at, happy to do it.
Nice work everyone who's contributing. Thanks for your efforts keeping my Note 2 relevant.?
GPS
How did you get the GPS working? I tried flashing the GPS fix linked in the thread and a clean install with the latest nightly. I drive around and never obtain a GPS lock.
k3v0 said:
How did you get the GPS working? I tried flashing the GPS fix linked in the thread and a clean install with the latest nightly. I drive around and never obtain a GPS lock.
Click to expand...
Click to collapse
I followed the sequence in this comment on the main thread and it just worked.
http://forum.xda-developers.com/showthread.php?p=58403610
Credit: @kylemccracken
"Edit: Make sure all important data and backups are stored to your external SD card before formatting. I used Philz 6.48.4 and CWM 6.0.5.0 when following this procedure.
[IMPORTANT]
After wiping clean to install a new rom, factory resetting, and wiping cache and dalvik cache, in philz recovery, go to your storage and mounts settings and format every option you can EXCEPT sdcard1. Reboot your recovery then proceed with the steps below.
Make sure you have your ROM, Gapps, SuperSU, and GPS fix zips on your external sdcard1. Flash in the order below.
1. Flash your ROM zip.
2. Perform a factory reset then wipe both cache options. This step is very important when facing problems after flashing.
3. Flash your Gapps zip. Wipe both cache.
4. Flash your SuperSU zip. Wipe both cache.
5. Flash GPSfix zip. Wipe both cache.
6. Reboot.
This process will give you the cleanest possible install with the highest chance of success. When I start having problems with flashing, I format everything (except sdcard1) then follow those steps. It's the same procedure I took when flashing the CM12 nightly and all is running well."
So I've been following the change log for this Rom, and I can't understand much.
I'm still on the 1/5/15 non nightly version and it's pretty much functional as a daily driver. What I'm wondering is are there any major differences for the newer nightlies?
Perhaps in addition to being a Q&A on these nightlies, everyone can post which version they're on, how it is (what's broken/what's been fixed), and what's new if anything.....
Newb question: This is the first time I've started on a ROM at such an early stage of its development. Typically how fast does CM development progress once a new version is started? Idle curiosity mostly.
The Commish said:
Newb question: This is the first time I've started on a ROM at such an early stage of its development. Typically how fast does CM development progress once a new version is started? Idle curiosity mostly.
Click to expand...
Click to collapse
That would be nightly.
Sent from my SM-N910P using XDA Free mobile app
t4d73 said:
That would be nightly.
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Haha, thanks. ? I understand the nightly releases. What I meant was I guess is how long after a new version is started does it normally take to get to the first milestone or even snapshot release for instance? Like I said, I'm just curious about the process.
The Commish said:
Haha, thanks. ? I understand the nightly releases. What I meant was I guess is how long after a new version is started does it normally take to get to the first milestone or even snapshot release for instance? Like I said, I'm just curious about the process.
Click to expand...
Click to collapse
Lol. Yeah I wouldn't get your hopes up too high for that. It might happen but I guess we'll see. I don't think any device has gotten a milestone just yet anyway.
Sent from my SM-N910P using XDA Free mobile app
Keeps restarting on cm12 boot screen
Hey guys,
I have a situation I've never come across and wanted to see if someone might be able to point me in the right direction. I have two Samsung Note 2(l900) and running on cm12 as of this morning. I installed the new nightly on both devices the same exact way by opening clockwork recovery and installing zip. One device was successful and is working just fine, the other seemed to flash fine until it had finished loading the apps and going into boot. The device would restart on the note 2 logo screen and then proceed to the cm12 boot screen and then restart after a few seconds. I went back into recovery which took longer than usual, and proceeded to clear partition, wipe dalvik cache, and install older nightlies. I had the same result no matter what nightly I went with.
I decided to set the device back to stock rom and root again. I it worked just fine, so I went through the process about 4 times installing different nightlies but had the same restarting results. It was then I noticed that getting in clockwork recovery manually lagged about 30 seconds. I took the advice of someone on the Google plus forum and switched the recovery from clockwork to twrp. Tried again with the same restarting results and with the manual recovery lagging about 30 seconds to get into.
It seems to work just fine if I flash to stock touchwiz but recovery seems to have issues.
Anyone getting Netflix or Play Movies to work yet on the latest versions? It's the only thing that made me have to revert back to CM11. I tried looking over the change log but honestly I don't know what half that stuff means.?
The Commish said:
I followed the sequence in this comment on the main thread and it just worked.
http://forum.xda-developers.com/showthread.php?p=58403610
Credit: @kylemccracken
"Edit: Make sure all important data and backups are stored to your external SD card before formatting. I used Philz 6.48.4 and CWM 6.0.5.0 when following this procedure.
[IMPORTANT]
After wiping clean to install a new rom, factory resetting, and wiping cache and dalvik cache, in philz recovery, go to your storage and mounts settings and format every option you can EXCEPT sdcard1. Reboot your recovery then proceed with the steps below.
Make sure you have your ROM, Gapps, SuperSU, and GPS fix zips on your external sdcard1. Flash in the order below.
1. Flash your ROM zip.
2. Perform a factory reset then wipe both cache options. This step is very important when facing problems after flashing.
3. Flash your Gapps zip. Wipe both cache.
4. Flash your SuperSU zip. Wipe both cache.
5. Flash GPSfix zip. Wipe both cache.
6. Reboot.
This process will give you the cleanest possible install with the highest chance of success. When I start having problems with flashing, I format everything (except sdcard1) then follow those steps. It's the same procedure I took when flashing the CM12 nightly and all is running well."
Click to expand...
Click to collapse
I've tried several methods and combinations of wiping at every possible opportunity before pressing reboot and i'm still having
issue. All the the apps are listed in the app drawer displaying the file name instead of the app name. Also all of the apps display the same icon (default android) and the not installed toast appears when attempting to launch any of them. Is anyone else having this issue
attempted flashing
cm-12-20150203-NIGHTLY-l900.zip with md5: ba795d6a4261654648b0eb5cec019021 downloaded from http://download.cyanogenmod.org/?device=l900&type=stable
cm-10.1.3-l900.zip with md5: ba795d6a4261654648b0eb5cec019021 downloaded from http://wiki.cyanogenmod.org/w/Gapps
has anyone had success with either of these
currently running Android 5.0 Lollipop ROM for Galaxy Note 2! [CM12] downloaded from http://galaxynote2root.com
attempted with both gapps-lp-20141109-signed.zip and LollipopMicroGapps-121914-HighOnAndroid.zip both downloaded from http://galaxynote2root.com
I would prefer to use the aforementioned build because the build I'm running is not compatible with the nightlies
thanks for any responses in advanced.
KAZETARO said:
I've tried several methods and combinations of wiping at every possible opportunity before pressing reboot and i'm still having
issue. All the the apps are listed in the app drawer displaying the file name instead of the app name. Also all of the apps display the same icon (default android) and the not installed toast appears when attempting to launch any of them. Is anyone else having this issue
attempted flashing
cm-12-20150203-NIGHTLY-l900.zip with md5: ba795d6a4261654648b0eb5cec019021 downloaded from http://download.cyanogenmod.org/?device=l900&type=stable
cm-10.1.3-l900.zip with md5: ba795d6a4261654648b0eb5cec019021 downloaded from http://wiki.cyanogenmod.org/w/Gapps
has anyone had success with either of these
currently running Android 5.0 Lollipop ROM for Galaxy Note 2! [CM12] downloaded from http://galaxynote2root.com
attempted with both gapps-lp-20141109-signed.zip and LollipopMicroGapps-121914-HighOnAndroid.zip both downloaded from http://galaxynote2root.com
I would prefer to use the aforementioned build because the build I'm running is not compatible with the nightlies
thanks for any responses in advanced.
Click to expand...
Click to collapse
Sorry, I'm probably not the most knowledgeable. If it wasn't for these forums I wouldn't know how to do any of it. I haven't had any issues flashing, but I followed the steps I quoted from the get go and do that every time. Currently I'm back on the last KitKat nightly because Netflix/Play Movies is still not working on CM12. Have you tried any of the CM11 builds? Im currently using:
http://download.cyanogenmod.org/get/jenkins/98444/cm-11-20150118-NIGHTLY-l900.zip
and I use the 20140606 GApps package found here:
http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
The Commish said:
Anyone getting Netflix or Play Movies to work yet on the latest versions? It's the only thing that made me have to revert back to CM11. I tried looking over the change log but honestly I don't know what half that stuff means.?
Click to expand...
Click to collapse
Odd that Netflix and Play Movies don't work. Plex, Amazon Instant Video, MX Movie Player, and Chromecast all work.
Sent from my SPH-L900 using Tapatalk
Deleted
Hello,
THIS IS ALPHA SOFTWARE. Not for daily use.
While we wait for the Official CyanogenMod 12.1 for our Moto X Pure, I will build the ROM with the latest commits.
Please note that this is not my work. I have simply put together a ROM pulling the source from other devs repos.
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is my personal CyanogenMod build based on latest CyanogenMod 12.1 (Android 5.1) code, from the 'cm-12.1' branch.
All seems to work fine. Please make sure to do a full wipe before flashing and, of course, use a 5.1 Gapps package.
I'll try to provide updates at least once a week until the official nightlies are released.
At this point NFC, BT, WiFi and Data are working. I am not aware of any issues.
ROM and GAPPS
GAPPS from here. Choose ARM64 and 5.1
Also the ROM says that is from 09/27, but in fact is from 10/05. I will fix that on the next build.
If I extracted and flashed the kernel on the stock rom would it potentially boot without any issues?
Sweet so is this based on cm 12.1 by the way ? If so are we able to use cm themes ?
I am on Verizon will test soon ! Will make backup first and flash
I will also report if hd voice works I hope it does
@spotmark you testing ?
Sent from my XT1575 using Tapatalk
Moh_Jay said:
If I extracted and flashed the kernel on the stock rom would it potentially boot without any issues?
Click to expand...
Click to collapse
If you are referring to using the stock kernel with this ROM, it won't work. Same is true if you flash the CM kernel in stock.
patt2k said:
Sweet so is this based on cm 12.1 by the way ? If so are we able to use cm themes ?
I am on Verizon will test soon ! Will make backup first and flash
I will also report if hd voice works I hope it does
@spotmark you testing ?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yep, still getting bootloops, but I'm going to keep at it.
patt2k said:
Sweet so is this based on cm 12.1 by the way ? If so are we able to use cm themes ?
I am on Verizon will test soon ! Will make backup first and flash
I will also report if hd voice works I hope it does
@spotmark you testing ?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yes, it's based on CM 12.1 and CM themes should work fine.
spotmark said:
Yep, still getting bootloops, but I'm going to keep at it.
Click to expand...
Click to collapse
Did you also wiped system before flashing?
miscom said:
Did you also wiped system before flashing?
Click to expand...
Click to collapse
First install, I just did cache, dalvik, data, but then I did a second install and did system wipe with it, and I'm still just sitting at the boot screen.
Also cannot boot it still. System, data, blah blah wiped. My guess is the ROM isn't really ready yet.
I am rooted with xposed. Might be an issue but I don't believe it lol
spotmark said:
First install, I just did cache, dalvik, data, but then I did a second install and did system wipe with it, and I'm still just sitting at the boot screen.
Click to expand...
Click to collapse
Are you using TWRP?
miscom said:
Are you using TWRP?
Click to expand...
Click to collapse
Yes.
I have to restore to stock good thing I did backup. Install fine,boots fine however after few seconds it gets soft-rebooted and then it loads again and soft-reboots. I got it to work properly on first boot and oh my god it was blazing fast!
Waiting for update and this will be super amazing.
To make it short: as soon as it boots few seconds and it gets soft rebooted with CM logo , as soon as it loads again same thing happens.
Did wipe,factory reset etc.. it's almost perfect I was getting Verizon service however I didn't see ehanced 4G LTE option in cellular settings.
I cannot wait for next build and volte please keep on working on this when I have extra bucks I will send donation! this phone on CM 12.1 is like a buggati veyron!
@spotmark are you seeing similar thing? not exactly a bootloop but rom loads and gets soft-rebooted?
patt2k said:
@spotmark are you seeing similar thing? not exactly a bootloop but rom loads and gets soft-rebooted?
Click to expand...
Click to collapse
Nope, couldn't get past the CM boot animation.
Soft reboots here too.
Couldn't get past CM boot animation. Tried flasing after 3 wipes, once with gapps, once without. Can't wait to return to my flashaholic ways haha
Seems to be working fine after flashing gapps.
Reporting in, I've been running this build through the gauntlet for the last few hours, restored all my apps and junk seamlessly and applied the good old Flats theme, no force-closes, and only two minor issues to speak of (aside from a laggy boot animation). Haven't gotten Xposed set up, but I really don't need it any longer, since CM12.1 has everything I needed Gravitybox for. Stock Android is nicer than most factory firmwares, but CM tears it up, it's zipped through everything I could throw at it, wish I could make a comparison video between the two. It's so smooth, I can hardly believe it.
The first and perhaps most critical issue i've seen is that Wifi doesn't autoconnect upon reboot, but will automatically connect to a preferred network upon opening Wifi settings. It autoconnects when walking out of and back into range, and after toggling wifi on/off, but I've had to open the wifi settings on every reboot to re-establish a connection.
The second issue isn't near as important, the "Wave" gesture to summon ambient display doesn't work, while every other gesture works even better than the stock Moto implementation. Had no idea these were already in the CM source, a very pleasant surprise!
Here's my logcat -d for startup, perhaps the solution to the Wifi issue is tucked away in there. Pastebin seized up after I pasted all 22000 lines of output, so here's a direct link to the log: https://drive.google.com/file/d/0B578nVIxgOBAd1o4aHhkYU1FT00/view
Edit: Just encountered a soft reset when adding a widget to Nova Launcher, should have had logcat running, but i've got it up now in case it happens again. Fixing to run it through a normal work day tomorrow to see how the battery life/stability holds up.
PiousInquisitor said:
Seems to be working fine after flashing gapps.
Click to expand...
Click to collapse
How long did your first boot take? I waited about 15 minutes and my phone was blazing hot so I just restored my stock backup. Did you use the gapps from OP?
juanacevedo said:
How long did your first boot take? I waited about 15 minutes and my phone was blazing hot so I just restored my stock backup. Did you use the gapps from OP?
Click to expand...
Click to collapse
It took less than a minute to get past the boot animation. It soft rebooted at the wifi setup. I then booted into recovery and installed the gapps package. When it booted up again everything was fine, no reboots. Though the default clock force closes. I usually use timely anyway. I havent tested everything yet, but it seems good so far.
Booted and running, no reboots yet. Thanks for this!
Edit, found my first issue, twist to open camera causes reboot. In fact, opening camera at all causes reboot.
Note: This should go without saying since this is a very early beta build, but I'm not responsible for any direct, or indirect damage done to any phone or accessories from flashing/ using this rom.
Also please read the entire op before installing/posting.
Welcome to:
THE ARKO PROJECT
About the Rom:
I started this whole project when I had a G5, and development was still slow. I met someone who was kind enough to get me started, and give me the basic info I needed to start my journey in development. I had always wondered if I could, but never really knew where to start.
Seeing the lack of development for such a great device. I decided to take matters into my own hands (however inexperienced they may be). So far I've created basic tweaked stock roms for the G5 & G Stylo. I never released them however because I didn't make it too far. Because the devices ended up being damged (which is unusual for me).
Anyway that brings us to here & now. This rom is also very basic (for now). I plan however to add as many features as possible & plausible. While keeping it fast, smooth, and reliable. Rest assured I test every build for at least a couple of days before posting them here. Anyway onto the good stuff.
Source: Pulled from stock MM 6.0 30d
Boot img: Pulled from stock MM 6.0 30d (changed to insecured).
Android ver: MM 6.0 30D
Features:
Rooted (Sytem install)
Wifi, data, bluetooth etc. all working
Dpi set to 560
Debloated (More apps removed in future updates)
Busybox
All app multiwindow support enabled by default
Quick power on
Auto rotate in homescreen (tested with Nova Launcher)
Faster video streaming
Increased wifi scan interval
No ring delay
Enabled Adoptable storage
Jpeg quality 100% plus other media enhancements
Disabled error reporting
And some more I can't think of....
Planned features (feel free to suggest some):
4 way reboot
Volume button orientation mod
Possibly aroma installer
That's all I can think of off the top of my head but there is more.
I also plan to make a few color ui themes as well.
For example
Red & Black
Blue & Black
Green & black
Etc. Etc.
Feel free to request different colors as well (doesn't mean it will neccesarily happen, but you can ask
Install instructions:
*Make sure the version of TWRP you are using supports updater-scripts! This is very important! If it doesn't the rom will not flash! I'm using the latest version of multirom TWRP, and can confirm the rom flashes just fine.
1. Make a TWRP backup (optional, but heavily suggested)
2. Download and place zip on sd card
3. Do a full wipe
4. Install zip
5.Enjoy
Note: updates are disabled two minutes after booting the rom. No user action is required. The old method I had tried didn't actually work. Got the ota again a week later. However it is 100% fixed now.
New DL link: https://drive.google.com/file/d/0B1bdSH2f5u2UMzdBUlkzcTFBMU0/view?usp=drivesdk
I don't know if this would work since I have not really put much research in to it, but could you make the folder where the update is downloaded to read-only?
BoredKender said:
I don't know if this would work since I have not really put much research in to it, but could you make the folder where the update is downloaded to read-only?
Click to expand...
Click to collapse
Probably not a good idea. Folder also has a few log files too. If all else fails then I'll give it a shot. I also had a thought that perhaps it isn't named anything like lgdmsclient.
After some sleep I've got a couple days off work so I'm gonna try to get multi rom working. (Haven't used it since kk early android L. That way I can just go down the list remove lg services apk's one by one and hope that either multirom or twrp could save me from a brick if anything goes wrong. Right now I have been using the delete update.zip/reboot. To keep the zip off my phone. Only problem is it takes a while for the system to realize an update is available after that. So It would be easier to remove an apk, build, flash, repeat until I find the culprit. MR will really help though as it'll save a lot of time between flashes. I really do appreciate the help/input though.
Also I've randomly found myself booted into twrp and the update try to install itself. Just luckily had zip verification on so it didn't flash.
Removed build.
Deleted
The Rom now has it's own thread in Tmo Android development located here:https://forum.xda-developers.com/tm...t/rom-arko-project-g3-edition-6-0-mm-t3555919
Moderater if you will please, close this thread. Thanks.
Thread Closed.