Develop Bugs

Mod(Share)Cm 13 for our Redmi 1s Based on Android 6.0 Marshmallow.

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Known bugs/Issues:
FM isn't enabled in this build. CM needs work on it
SElinux is permissive. Will be solved as time passes
CM File Manager don't seem to work properly atm. Install any other file manager from Play Store.
As this is an early marshmallow build, many apps seems not functioning well with mm. It's app issue.
What Works:
Display
RIL (msim with working data!)
Camera
WiFi
Bluetooth
SD Card
Audio
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
Flash ROM and Gapps.
Reboot.
Download links: (Everything working fine. Don't enable "Powersave mode" causes Bootloop)
ROM by @rebelos: http://onerom.org/~karan/cm-13.0-20151109-UNOFFICIAL-armani.zip
ROM By @TheStrix: https://www.androidfilehost.com/?fid=24269982086992323
God's kernel for cm-13.0: http://d-h.st/E9Fm
Gapps: https://www.androidfilehost.com/?fid=24269982086990427
Source Code:
Device: https://github.com/TheStrix/android_device_xiaomi_armani
Kernel: https://github.com/TheStrix/android_kernel_xiaomi_armani
Vendor: https://github.com/TheStrix/proprietary_vendor_xiaomi
Rom Information
CyanogenMod 13.0, ROM for the Xiaomi Redmi 1S
Contributors
TheStrix, Rebelos, Armani-Devs & CyanogenMod
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0 Marshmallow
ROM Kernel: Linux 3.4.x

finally
---
link http://forum.xda-developers.com/redmi-1s/orig-development/rom-cyanogenmod-13-0-t3245327
unofficial cm13 on dev now

kangramdan666 said:
finally, is it 1st public release or just for testing only, sir?
Click to expand...
Click to collapse
It is initial build so its not for daily usage but known bug will solve in next build.

Any screenshot?

Rahulraj943472 said:
It is initial build so its not for daily usage but known bug will solve in next build.
Click to expand...
Click to collapse
yap, hopefully better in next build.
whether you have to download and try it for yourself ?
sandiprickyroy said:
Any screenshot?
Click to expand...
Click to collapse
check this https://drive.google.com/folderview?id=0BxgbUjtvHfK8amRmcUp1U0Nmd0E&usp=sharing

kangramdan666 said:
yap, hopefully better in next build.
whether you have to download and try it for yourself ?
check this https://drive.google.com/folderview?id=0BxgbUjtvHfK8amRmcUp1U0Nmd0E&usp=sharing
Click to expand...
Click to collapse
Bro its thread already created in redmi 1s original android development.

Internet working or not?

anyone tried custom kernel i.e. GK, hwz the performance

there's a thread on this already, here.
http://forum.xda-developers.com/redmi-1s/orig-development/rom-cyanogenmod-13-0-t3245327
I'll close this one.
Darth
Forum Moderator

[KK] [AOKP-based] UltraKK for Xperia M

This is a small project made by me in order to help people who wants to get KitKat on their Xperia M. This ROM is based on AOKP (Android Open Kang Project), with some additional modifications. This ROM is very smooth, with almost no lags.
Features:
Original AOKP features
CyanogenMod File Manager
Sony Apps (Music, Videos) - Album still getting bugs
NUI Kernel (thanks to @thichthat)​
How to install: Same as CyanogenMod 11/AOKP
About dirty flashing: This ROM doesn't have CM11 backup script, so GApps will be wiped after flashing. Please reflash GApps after dirty flashing.
XDA:DevDB Information
UltraKK, ROM for the Sony Xperia M
Contributors
extremetek, thichthat, FrOz3n, CyanogenMod community, Sony
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.3 Baseband
Based On: AOKP
Version Information
Status: Alpha
Created 2016-12-17
Last Updated 2016-12-16
Download links:
Alpha 1
Q/A:
Q: Is this ROM based on latest source?
A: No.
Q: Is the Stagefright bug fixed?
A: No.
Q: Was this ROM ported from another device with newer KitKat source?
A: No. This is pure AOKP built by @FrOz3n

Changelog:
Alpha 1 - December 17, 2016: Initial release. Album is untested, so it's not added.

Screenshots?

Screenshots: (some apps are installed by me)

extremetek said:
Screenshots: (some apps are installed by me)
Click to expand...
Click to collapse
Thanks but please add some details like is it based on latest sources? Is stagefright bug removed? Was it ported from some other device that has latest kitkat sources? Sorry for so much questions

Adarsh Dubey said:
Thanks but please add some details like is it based on latest sources? Is stagefright bug removed? Was it ported from some other device that has latest kitkat sources? Sorry for so much questions
Click to expand...
Click to collapse
1. It's not based on latest sources. It's based on an very old build of AOKP (from July 2014).
2. No, the Stagefright bug wasn't removed (for more information read Answer #1)
3. It's not ported from any device. It's pure AOKP built by @FrOz3n.

extremetek said:
1. It's not based on latest sources. It's based on an very old build of AOKP (from July 2014).
2. No, the Stagefright bug wasn't removed (for more information read Answer #1)
3. It's not ported from any device. It's pure AOKP built by @FrOz3n.
Click to expand...
Click to collapse
Thanks

Hey I like this ROM light and fluid, get the job done for some serious abuse of RIL..good job op..

CyanogenMod 12.1 for MiPad (mocha)

Here is CyanogenMod 12.1 for XiaoMi MiPad.
Whats working:
Sound
3d graphics
Hardware accelerated video decoding
WiFi
Sensors (screen autorotation)
Camera
Not working:
Camera lags in Photo mode
Sometimes main camera is not detected to fix try to power off/power on tablet.
WiFi sometimes forget saved passwords
Stock MIUI 6.12.12 kernel 3.10.24 used in ROM for now.
Device tree source: https://github.com/HighwayStar/android_device_xiaomi_mocha
Vendor tree: https://github.com/HighwayStar/android_vendor_xiaomi_mocha
Unfortunately CM12.1 tree still need some patches that cant be integrated in device tree, check issues page if you want to try build it https://github.com/HighwayStar/android_device_xiaomi_mocha/issues
Help with issues left are welcome.
Downloads:
Beta 1: cm-12.1-20170110-UNOFFICIAL-mocha.zip
Changelog:
First release
Beta 2: cm-12.1-20170117-UNOFFICIAL-mocha.zip
Changelog:
Camera HAL hex-patched from API19 to API21
buid.prop tags fixed, tablet now correctly detected as MI PAD by Play Market
XDA:DevDB Information
CyanogenMod 12.1 for MiPad (mocha) , ROM for the Xiaomi Mi Pad
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_device_xiaomi_mocha
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2017-01-17
Created 2017-01-10
Last Updated 2017-01-18

reserved

For a review.

Thank you for keeping the Mi Pad alive ?

IMO, this is the best MiPad ROM! Thank you so much, Sir!

Smoothest ROM for MiPad

Flashed smoke kernel on top of it. I know it can mess things up.
Will keep updating if that helps or not.

Thanks for developing for Mipad.. Hopefully we can have some other developers who can chip in to help to write wrappers for the camera... (I know not priority)
Thanks a lot!

So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.

Star_king12 said:
So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.
Click to expand...
Click to collapse
cm13 would be better but, at this time we should focus on stablizing cm 12.1

OoSTARTERoO said:
cm13 would be better but, at this time we should focus on stablizing cm 12.1
Click to expand...
Click to collapse
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?

hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.

Awesome... Can't wait to reach home and flash this.... Have waited so long to get away from MiUi
Sent from my Nexus 6P using XDA-Developers Legacy app

Sudeep Duhoon said:
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.
Click to expand...
Click to collapse
Why? Shield tablet has k1 and nougat.

Star_king12 said:
Why? Shield tablet has k1 and nougat.
Click to expand...
Click to collapse
I didn't knew about custom roms. The point was, we can get vulkan if we get marshmallow and as you told, on nougat too.

hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
I think it will be hard work.
We've never got blob sources from xiaomi it can be impossible.
But still, just having marshmallow or nougot would be awsome...
Antutu score can be up to 80000++
---------- Post added at 06:50 AM ---------- Previous post was at 06:45 AM ----------
Can we have marshmallow which "at least" boots up?
I think it would be quite hard to boot it up with old blobs

Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?

anasahmad17 said:
Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?
Click to expand...
Click to collapse
If rom is completely source built, not very tough to bump the android version. If we use prebuilt blobs (like in this case) it may be difficult.

Bug : The in-built microphone does not seem to work.

Wow the performance is so promising. Thanks for the effort and keep it up!
11h idle, 1% battery drained. Wow I'm impressed.

[ROM][6.0.1] Resurrection Remix [stable: 20170531] [FULLY WORKING]

Hello!
This is development thread of Ressurection Remix - Android 6.0.1 Marshmallow by NovaFusion.
Credits:
Macław
Thanks for support:
marcin1147
Meticulus
Huge thanks to Resurrection Remix / LineageOS team.
You can get it from http://novafusion.pl/.
Download is directly provided from our servers - it's fast, stable and fully resumable!
If you appreciate our work, please, use thanks button!
XDA:DevDB Information
Ressurection Remix / Android 6.0.1, ROM for the Samsung Galaxy S III Mini
Contributors
New Macław, marcin1147, Meticulus
Source Code: http://github.com/novafusion
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: Ressurection Reminx
Version Information
Status: Stable
Current Stable Version: 20170531
Stable Release Date: 2017-05-31
Current Beta Version: 20170222
Beta Release Date: 2017-02-22
Created 2017-02-22
Last Updated 2017-05-31

Features:
RIL (phone/SMS/3G)
audio (both speakers/headphones/microphone)
Wi-fi
Bluetooth 4.0 with LE support A2DP
GPS/Glonass/A-GPS
sensors
compass
camera (taking photos and videos)
video playing
2D/3D HW Acceleration
all native tethers (Wifi/BT/USB)
Google Play
CPU sleep mode
MTP
ADB
no tearing
tripple buffering
external storage
f2fs filesystem support
offline charging (thanks @3liteking148 for fix)
Issues:
f2fs is not available for /cache partition, but on /system works fine!

20170531
RR sources updated to latest version
back to releases – a lot of changes, also ported from Nougat releases
Odin package update
20170305
RR sources updated to latest version
fixed issues with stability reported by some users (thanks for logs)!
better f2fs support
trying to make video playback working in more 3rd party apps (please report)
Odin package update
20170223
RR sources updated to latest version
fixed issues with RIL services / SIM card detection (thank Meticulus for help)
Odin package update
20170222
first release

All releases and Google Apps are available for download from:
http://novafusion.pl
Download is directly provided from our servers - it's fast, stable and fully resumable!
Sources: http://github.com/NovaFusion

Nice, will you make a LineageOS for S3 mini?

No sim card detected for me on this one.
Go back to RR 5.1

flexi.man said:
No sim card detected for me on this one.
Go back to RR 5.1
Click to expand...
Click to collapse
Could you just restore kernel from RR5.1 from backup and check if sim card would be detected?

You want me to backup kernel on RR 5.1 , flash RR 6 and gapps 6 and restore RR 5.1 kernel and boot RR 6.0 ?

flexi.man said:
You want me to backup kernel on RR 5.1 , flash RR 6 and gapps 6 and restore RR 5.1 kernel and boot RR 6.0 ?
Click to expand...
Click to collapse
Indeed. I will also make another package with some fixes if this wouldn't work.

I try , Bootloop on RR logo

flexi.man said:
I try , Bootloop on RR logo
Click to expand...
Click to collapse
Ok, I will post another package in a minute with fixed kernel, would you be able to try with it?

Not today ( midnight in France) , i try tomorrow your new package

flexi.man said:
Not today ( midnight in France) , i try tomorrow your new package
Click to expand...
Click to collapse
Ok, no problem, will post it in another few minutes, maybe someone else will try it, if no, will wait for you tomorrow

New Macław said:
Ok, no problem, will post it in another few minutes, maybe someone else will try it, if no, will wait for you tomorrow
Click to expand...
Click to collapse
I can try today until I get home, in about 3hrs

rubentkato77 said:
I can try today until I get home, in about 3hrs
Click to expand...
Click to collapse
awesome, package will be ready in a few minutes then

rubentkato77 said:
I can try today until I get home, in about 3hrs
Click to expand...
Click to collapse
http://2.get.novafusion.pl/?id=1788
Another build with other kernel, waiting for feedback.

Many congrats! Thank you,
I have the same problem with the sim card

varessy said:
Many congrats! Thank you,
I have the same problem with the sim card
Click to expand...
Click to collapse
On which package?

Hi! Thanks for your work. I flashed your first build yesterday... And there was problem with SIM Card. Then, today morning I flashed the second build with another Kernel hoping it will be fixed. But still the same problem. But the system seems to be very smooth!

Gallery FC (a restart fixed it, for now).
SIM not recognized (fixed).
WiFi dropped on reboot (only once).
Pico TTS FC during system setup.
f2fs definitely not working.
MTP not always working (works fine at the moment).
Google voice assistant still affects video recording (surprised no one has actually FIXED this yet).

[ROM][9][ONE UI][TREBLE][J710X] CyterafleOS J6Port V3

CyterafleOS J6 Port,based on November base of J600FN​Features​
-Treble
-Face Recognition
-Dolby Atmos (only on Headphones and BT Speakers)
-Updated Weather and Messages app
-Oreo Camera Drivers (for improved pictures) thanks to @Ananjaser1211
-Pie Bluetooth Libs
-NFC
-Latest Kraken (thanks to @SPARTINACUS)
-Digital Wellbeing
V2
-Added Bixby Routines
V3
-Optimised rom
-Camera improved
-Custom wallpaper CyterafleOS J6
- Dual Sound Mod (thanks to @mohitmallick17)
V4
-Pie Camera Libs
- February 2020 security patch
- Restored stock sound files but mod will be uploaded ​Installation​
-Flash CreateVendor (pinned in #2 post)
-Reboot recovery
-Reset Data/Vendor
-Flash rom and Magisk if you want root ​Link​
XDA:DevDB Information
CyterafleOS J6 Port, ROM for the Samsung Galaxy J7
Contributors
Arnaud Créative Studios, Karthik1731
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Oreo BL/Modem
Based On: One Ui
Version Information
Status: Stable
Current Stable Version: 4.0
Stable Release Date: 2020-04-07
Created 2020-01-09
Last Updated 2020-04-07

Vendor Creator
Big thanks to @ananjaser1211 for Treble and this file !
You must install it before install rom !

Thank you for the ROM. What is difference with other thread?

spiritforme said:
Thank you for the ROM. What is difference with other thread?
Click to expand...
Click to collapse
Here the patch is pineed and I added screenshots

Kernel Helio pie v4? Link plis

Super rom
J7 2016 fq device super rom np thank you

No bugs?

thanks for working but does not read the device on the pc connection. only stays in charge. no device and sd card connection.How to solve this problem J710FQ

The rom is great but the problem I had is that the airplane mode does not work.:crying:

Esteban Quito said:
The rom is great but the problem I had is that the airplane mode does not work.:crying:
Click to expand...
Click to collapse
What is your baseband ? If you have Nougat baseband rom can't be stable for you

Bluetooth is not working on j710f please fix it

Gave it a shot on my J710FN, no problems here, everything is working fine so far, thanks for this rom

Bluetooth fix
On j710f with the latest oreo firmware, bluetooth doesn't work.

mavi33 said:
thanks for working but does not read the device on the pc connection. only stays in charge. no device and sd card connection.How to solve this problem J710FQ
Click to expand...
Click to collapse
CronosKernel v5 can not solve the problem of seeing the device on the pc? @Arnaud Créative Studios

mavi33 said:
CronosKernel v5 can not solve the problem of seeing the device on the pc? @Arnaud Créative Studios
Click to expand...
Click to collapse
I never had problem when connecting my phone to PC,I kept the original Kraken

The original Kraken does not work on the J710F. PC does not see

mavi33 said:
The original Kraken does not work on the J710F. PC does not see
Click to expand...
Click to collapse
Mine see with original Kraken,but you have Samsung drivers on your PC ?

Not working Google Pay, pls fix SafetyNet check (ctsProfile: false)

Best ROM ever! Please continue the development! The camera works awesome, there's no Indian bloatware, RAM management is awesome (Always like 600-700MB of RAM free), very VERY battery efficient, gaming performance could probably be a little better but it's way better than on the other ROMs I tried. I wish I could donate to you because you've made such an awesome ROM. PLEASE CONTINUE THE DEVELOPMENT!!!
P.S.: There is a weird bug to where the CronosKernel causes a boot loop. I don't really mind it as the Kraken Kernel runs buttery smooth.

Bluetooth isnt working on j710mn any solution ?